Professional Documents
Culture Documents
Biodur Catalog
Biodur Catalog
Biodur Catalog
CATALOG
For the first time, the catalog lists a number of different services that the experts at
BIODUR Products GmbH offer to help you get started using our products. You have
asked for comprehensive consultation and support services, and we hope that these
services efficiently meet your needs.
Also for the first time, the catalog contains no price list. Omitting it makes allowances
for the volatility of commodity prices and differences in international distribution
channels. On request, we will be happy to provide you with current prices for your
location.
Direct customers will continue to benefit from their current special conditions.
Over the 30-plus years since its founding, BIODUR has grown into a global company
that counts academic and other institutions as well as individuals among its satisfied
customers. The continuing refinement of the plastination process, the worldwide
interest in it, and the continuing high demand for our products foster our commitment
to innovation. Our commitment is reflected in our expanded product range, which
allows you to stay on the cutting edge of technology, environmental protection, and
industrial safety.
With our comprehensive services, polymer systems, solutions for plastination projects,
and complete equipment packages for plastination laboratories, we continue to
provide comprehensive care for you.
If you need products in an area of plastination not covered in our catalog, please do
not hesitate to get in touch with us. In keeping with our philosophy, we will support
you to best of our abilities.
We aim to make your experience with us a pleasure.
CONTENTS
Introduction
4
Preservation by Plastination
I. Services
8
8
8
8
8
Consultation Services
On-Site Consultation Services
Delivery Services
Installation Services
Training Services
Silicone Polymers
Silicone Hardeners
Epoxy Resins
Epoxy Hardeners
Epoxy Accelerators
Polyester Copolymer and Hardener
Additives
Solutions for Fixation by Vessel Injection
Agents for Formaldehyde-Free Embalming
Special Notes on BIODUR Polymers
Overview of BIODUR Polymers
INTRODUCTION
Preservation by Plastination
The study of biological specimens is significantly impeded by
decay. Thus for centuries, people have been looking for
appropriate methods of preservation. Thanks to plastination,
specimens can be preserved for research, teaching, and
demonstration purposes in a lifelike and durable manner.
Specimens are impregnated with special reactive polymers
in a vacuum process. The mechanical (flexible or rigid) and
optical (translucent or opaque) properties of the polymers
used determine the characteristics of the preserved objects.
Plastinated specimens are dry and odorless; they maintain
their original surface relief and are identical to their prepreservation state, down to the cellular level. Histological
studies can even be performed on them.
Plastination involves replacing the water and fat in tissues
with a reactive polymer such as silicone rubber, epoxy, or a
polyester resin: In a solvent bath, initially the tissue water is
replaced by freeze-substitution, and later, at room
temperature, the tissue fats are gradually replaced by
acetone. The dehydrated and degreased specimen
subsequently is placed into the polymer solution.
Forced Impregnation:
Under vacuum conditions, acetone escapes
from the tissue, creating a negative
pressure inside the specimen that allows
the polymer to enter.
4
A special variation of plastination is so-called sheet plastination. With this method, specimens such as
individual organs or entire bodies, mostly in a deep-frozen state, first are cut or sawn into slices that are
2 mm to 8 mm (about 1/12 in to 1/3 in) thick. These slices are placed between polymer nettings, dehydrated,
degreased, and eventually impregnated with a polymer under vacuum conditions. To give the specimens a
smooth surface, the impregnated slices either are cured between foil or have additional resin casted
around them inside a flat chamber. The refractive index of the resin used determines the optical properties
of the plastinated body slices: Epoxy resin yields translucency and good coloration of the various tissues.
Polyester resin, which is used for plastination of brain slices, allows for particularly good discrimination
between white and gray brain matter.
Plastinated slices of organs and bodies constitute excellent teaching materials in cross-sectional anatomy, a
field of ever-increasing importance, and they correlate well with radiographic images. Serial translucent
body slices are useful in various scientific research approaches. In addition, they are a suitable diagnostic
aid in pathology because they allow for quick macroscopic-diagnostic screening of entire organs and organ
specimens. Pathologically modified tissue areas can then be selectively analyzed with conventional
histological methods.
The plastination process has been constantly refined since its invention in 1977 at the Institute of Anatomy
at Heidelberg. Today, it is recognized as a valid method of preservation and is practiced at more than
400 institutions in 40 countries. The main reasons for this widespread popularity are the toughness, the
durability, the lifelikeness, and high teaching value of plastinated specimens.
Note:
Numerous customer interviews and trainings have made clear that it is best to begin your
own endeavors in plastination with the BIODUR S 10 standard technique. This will allow
you to master the technology through hands-on experience so that you can produce
appealing specimens.
This approach also will provide you with the foundation for mastering one or more sheet
plastination techniques. Using your acquired knowledge and upgrading your plastination
equipment accordingly will enable you to produce high-quality sheet plastinates within a
reasonably short time.
Experience has taught us that highly specialized plastination tasks, such as the exclusive
production of brain slices, are not for beginners and require specific, in-depth training.
CATALOG
For your reference, rounded nonmetric units are provided in parentheses for most dimensions, quantities, and temperatures.
For exact measurements, please refer to the metric units.
Consultation on different methods of plastination (e.g., before a new laboratory is to be set up)
Consultation to determine your specific needs, taking into account your plastination experience
level, existing devices and chemicals, and the layout and capabilities of your premises
Review of the compatibility of your premises with your plastination needs, with specific estimates
provided as needed
Creation of an action plan for your organization for preparation for device delivery/installation
Device installation
Functionality testing
Certification of installation
Silicone Polymers
KSK01 BIODUR S 10 Suitable for all putrefiable macroscopic specimens. The S 10 standard technique is
easy to handle, not susceptible to mistakes, and requires only a relatively small amount of technical
equipment. Thus, it is especially suitable for beginners.
Product
BIODUR S 10
BIODUR S 10
Unit
1 barrel
1 barrel
Quantity
15.0 kg
50.0 kg
KSK02 BIODUR S 10 B Reddish Same properties as BIODUR S 10, but with a reddish tint, to make
plastinated muscles appear more lifelike.
Item #
KSK02A15.0
KSK02A50.0
Product
BIODUR S 10 B Reddish
BIODUR S 10 B Reddish
Unit
1 barrel
1 barrel
Quantity
15.0 kg
50.0 kg
Item #
KSK03A15.0
KSK03A50.0
Product
BIODUR S 15
BIODUR S 15
Unit
1 barrel
1 barrel
Quantity
15.0 kg
50.0 kg
Item #
KSK05A0.5
Product
BIODUR S 49
Unit
1 bottle
Quantity
0.5 kg
KSK04 BIODUR S 14 Red Low-viscosity silicone for color injection of vessels in fresh and formalin-fixed
specimens. Not capillary-passable (unlike epoxy resin BIODUR E 20 Pus; see page 13). Specimens injected
with BIODUR S 14 Red may be dehydrated for plastination purposes in acetone. However, they will only
temporarily (<24 h) withstand methylene chloride.
Item #
KSK04A1.0
10
Product
BIODUR S 14 Red
Unit
1 bottle
Capacity
1.0 kg
Silicone Hardeners
KSH01 BIODUR S 1 Hardener (infiltration hardener) for BIODUR S 10-impregnated and BIODUR S 15impregnated specimens for fast curing of deep or sealed-off areas of specimens (e.g., deep gluteus muscle
region, prostate gland, erector spinae muscle). Infiltration hardening is done in parallel to gas hardening.
Not recommended for general use, owing to possible loss of optical and/or mechanical quality. Also use
hardener BIODUR S 1 for curing injection polymer BIODUR S 14 Red.
Item #
KSH01A0.1
Product
BIODUR Hardener S 1
Unit
1 bottle
Quantity
0.1 L
KSH02 BIODUR S 3 Hardener (silicone chain elongator) for BIODUR S 10, BIODUR S 15, and
BIODUR S 49. Causes gradual thickening of silicone without causing it to cure when used alone. If
BIODUR S 3 is stored for extended periods of time, a white deposit may form at the bottom of the bottle
that can be dissolved by slowly and briefly warming to +50C (+120F) and shaking.
Item #
KSH02A0.15
KSH02A0.5
Product
BIODUR Hardener S 3
BIODUR Hardener S 3
Unit
1 bottle
1 bottle
Quantity
0.15 L
0.5 L
KSH03 BIODUR S 6 Hardener (cross-linking agent) for gas curing of BIODUR silicone polymers S 10,
S 15, and S 49.
Item #
KSH03A1.0
Product
BIODUR Hardener S 6
Unit
1 bottle
Quantity
1.0 L
11
Epoxy Resins
KEP01 BIODUR E 12 Standard epoxy resin of medium viscosity for sheet plastination; translucent, firm,
and slightly flexible when cured. Choose from different hardeners to vary the properties of the specimens:
BIODUR E 12 in combination with hardener BIODUR E 1: Standard epoxy resin for sheet plastination. The
properties of the hardener produce especially good staining of specimens.
BIODUR E 12 in combination with hardener BIODUR E 6 and accelerator BIODUR E 600: Suited for
plastinated tissue slices to be examined histologically. The cured polymer can be removed from the
specimen with a saturated solution of sodium methylate in anhydrous methanol.
BIODUR E 12 in combination with hardener BIODUR E 7 and accelerator BIODUR E 700: For producing
thin-ground section specimens. The cured polymer becomes very firm and cannot be separated from the
glass.
Item #
KEP01A5.0
KEP01A10.0
KEP01A30.0
Product
BIODUR E 12
BIODUR E 12
BIODUR E 12
Unit
1 bucket
1 bucket
1 hobbock
Quantity
5.0 kg
10.0 kg
30.0 kg
BIODUR E 12 will partially crystallize after only a few days, especially when stored cool. Heat to
+50C to +70C (+120F to +160F) before use. It is advisable to order BIODUR E 12 in buckets of a
size compatible with the available heating cabinets.
KEP02 BIODUR E 13 in combination with hardener BIODUR E 8: Epoxy resin system with a very long
processing time and a reduced tendency to yellow.
Item #
KEP02A5.0
KEP02A10.0
KEP02A30.0
12
Product
BIODUR E 13
BIODUR E 13
BIODUR E 13
Unit
1 bucket
1 bucket
1 hobbock
Quantity
5.00 kg
10.0 kg
30.0 kg
Product
BIODUR E 20 Plus Clear
BIODUR E 20 Plus Red
BIODUR E 20 Plus Blue
Unit
1 can
1 can
1 can
Quantity
1.0 kg
1.0 kg
1.0 kg
Epoxy Hardeners
KEH01 BIODUR E 1 Standard amine hardener for BIODUR E 12. Its chemical properties ensure good
color differentiation of the individual tissues when using E 12.
Item #
KEH01A1.5
Product
BIODUR Hardener E 1
Unit
1 canister
Quantity
1.5 kg
Product
BIODUR Hardener E 6
Unit
1 canister
Quantity
2.5 kg
13
Product
BIODUR Hardener E 7
Unit
1 can
Quantity
1.0 kg
KEH04 BIODUR E 8 Anhydride hardener for BIODUR E 13 epoxy resin. No addition of accelerator
required.
Item #
KEH04A1.0
Product
BIODUR Hardener E 8
Unit
1 can
Quantity
1.0 kg
BIODUR E 7 and BIODUR E 8 will solidify at room temperature. Heat to +70C (+160F) before
use.
BIODUR E 7 and BIODUR E 8 are highly hygroscopic anhydride hardeners. Contact with
moisture decreases activity.
KEH05 BIODUR E 20 Plus Hardener Amine hardener for BIODUR E 20 Plus. Contains solvent for
favorable flow properties.
Item #
KEH05A0.6
Product
BIODUR E 20 Plus Hardener
Unit
1 can
Quantity
0.6 kg
Epoxy Accelerators
The use of anhydride hardeners BIODUR E 6 and BIODUR E 7 requires the addition of an accelerator in
order for the resin-hardener system to actually harden.
KEB01 BIODUR Accelerator E 600 Amine accelerator for curing BIODUR E 12 in combination with
hardener BIODUR E 6.
Item #
KEB01A0.1
14
Product
BIODUR Accelerator E 600
Unit
1 bottle
Quantity
0.1 L
KEB02 BIODUR Accelerator E 700 for curing BIODUR epoxy resins in combination with hardener
BIODUR E 7.
Item #
KEB02A0.01
Product
BIODUR Accelerator E 700
Unit
1 bottle
Quantity
0.01 kg
BIODUR Accelerator E 700 is a strongly hygroscopic bromate. Store it in a dry place. If the
substance gets clumpy during extended storage or because of high humidity, pulverize it before
use.
Product
BIODUR P 40
Unit
1 canister
Quantity
5.0 kg
KPH01 BIODUR Hardener A 4 Peroxide hardener for BIODUR P 40. Add this to the polyester resin if no
device for UV curing is available. Recommended ratio: two parts by volume of BIODUR A 4 to 100 parts by
volume of BIODUR P 40.
Item #
KPH01A0.1
Product
BIODUR Hardener A 4 (for P 40)
Unit
1 bottle
Quantity
0.1 L
Additives
KAD01 BIODUR Plasticizer AE 10 For BIODUR epoxy resins. The recommended ratio of AE 10 to epoxy
resin is up to 20 parts by weight per 100 parts by weight.
Item #
KAD01A1.0
Product
BIODUR Plasticizer AE 10
Unit
1 bottle
Quantity
1.0 kg
15
KAD02 BIODUR Glass-Separator AE 30 For the separation of the cured specimen from the glass walls of
the flat chamber when using E 12. Ratio: 5% by weight (see the table on page 20).
Item #
KAD02A0.3
Product
BIODUR Glass-Separator AE 30
Unit
1 bottle
Quantity
0.3 kg
KAD03 BIODUR Red Pigment AC 05 Powder for dyeing of silicone polymers and epoxy resins in contrast
preparations of vessels. Recommended ratio: 2% (w/w) of the polymer mixture.
Item #
KAD03A0.1
Product
BIODUR Red Pigment (Powder) AC 05
Unit
1 bottle
Quantity
0.1 kg
KAD04 BIODUR Red Staining Solution AC 10 For the dyeing of macroscopic specimens in formalin
solutions or in acetone. Color: pastel pink. Ratio: 10 mL Red AC 10 to 20 L of dyeing solution. Repeated use
of the dyeing solution is possible.
Item #
KAD04A0.1
Product
BIODUR Red Staining Solution AC 10
(concentrate)
Unit
1 bottle
Quantity
0.1 L
KAD05-KAD09 BIODUR Color Pastes AC 50, AC 52AC 55 For the dyeing of epoxy resin and silicone resin.
Even after silicone impregnation and curing, specimens (e.g., fish) can be painted by using a mixture of
silicone, dye paste (2%), and adhesion mediator AS 70 (see below). If necessary, the dyed polymer mixture
can be diluted with solvents such as methyl ethyl ketone (BIODUR MEK; see below) or methylene chloride.
Item #
KAD05A0.1
KAD06A0.1
KAD07A0.1
KAD08A0.1
KAD09A0.1
Product
BIODUR Paste Red AC 50
BIODUR Paste Blue AC 52
BIODUR Paste Corn Yellow AC 53
BIODUR Paste Green AC 54
BIODUR Paste Black AC 55
Unit
1 bottle
1 bottle
1 bottle
1 bottle
1 bottle
Quantity
0.1 kg
0.1 kg
0.1 kg
0.1 kg
0.1 kg
KAD10 BIODUR Adhesion Mediator AS 70 For the surface treatment of cured silicone-impregnated
specimens before coating with dyed or colorless silicone resin.
Item #
KAD10A0.1
Product
BIODUR Adhesion Mediator AS 70
Unit
1 bottle
Quantity
0.1 L
KAD11 BIODUR Methyl Ethyl Ketone (MEK) Temporary solvent for epoxy resins for vessel injection and
for dyed polymer mixtures for surface treatments. Lowers viscosity and prolongs the processing time of
polymer mixtures.
Item #
KAD11A1.0
16
Product
BIODUR Methyl Ethyl Ketone (MEK)
Unit
1 bottle
Quantity
1.0 L
KAD12 BIODUR Barium Sulfate AC 85 An additive to injection polymers for generating radiographic
contrast. White, fine-grained powder. Protect from moisture to prevent clumping.
Item #
KAD12A0.1
Product
BIODUR Barium Sulfate AC 85
Unit
1 bottle
Quantity
0.1 kg
Product
BIODUR Solution U 5%
BIODUR Solution U 10%
Unit
1 barrel
1 barrel
Quantity
5.0 kg
5.0 kg
17
KEM06 BIODUR Solution 07 Low-viscosity polymer solution with very good flow properties, suitable for
contrasting the smallest vessels. It has no fixative properties and is often injected in advance to reach fine
vessels rapidly, and then fixing Solution U is immediately added.
Item #
KEM06A1.0
Product
BIODUR Solution 07 5%
Unit
1 bottle
Quantity
1.0 kg
KEM08 BIODUR U Set Set consisting of BIODUR Solution U (5%), BIODUR Solution U (10%), and
BIODUR Solution 07.
Item #
KEM08A11.0
Product
BIODUR U Set
Unit
1 set
Product
BIODUR Fix A 10
Unit
1 bottle
Quantity
2.0 kg
KEM02 BIODUR Fix T 20 Mixture of amphoteric surfactants with broad-spectrum antimicrobial effects.
Item #
KEM02A1.0
Product
BIODUR Fix T 20
Unit
1 bottle
Quantity
1.0 L
Unit
1 bottle
Quantity
1.0 L
Product
BIODUR Pine Oil
These products are mixed with water, triethylene glycol, and n-propanol as follows, forming a ready-to-use
injection solution (in parts by weight):
Water
N-propanol
Triethylene glycol
BIODUR Fix A 10
BIODUR Fix T 20
BIODUR Pine Oil
30
30
25
8
4
3
The proportions of water, n-propanol, and triethylene glycol may be varied as required (e.g., to change the
flow properties of the solution).
18
Experience has shown that the use of unsuitable polymer combinations may cause significant
complications, such as these:
(a) Insufficient impregnation or curing of the specimens due to demixing of the polymer components
under vacuum conditions or the incomplete chemical binding of monomers and hardeners due to
stoichiometric imbalances of the reactive mixture. Both chemical effects will lead to stickiness and
unpleasant odors of the specimens, and in duromers may also cause tension cracks.
(b) Over the years, polymers may release compounds that have not completely hardened, and these may
in turn cause skin irritations.
(c) Depolymerization due to unintended secondary reactions of chemical compounds of the plastinated
tissues with compounds of the polymer mixtures. These may manifest only years after the specimen
has been produced.
See data on mixing ratios, processing times, and shelf life on pages 2021.
19
Polymer
Silicones:
Harden
er
Additives
Mixing Ratios
S 10
S 3/S 6
1% (v/v) S 3 added
to S 10
S 10 B
Reddish
S 3/S 6
1% (v/v) S 3 added to
S 10 B Reddish
S 15
Archeological wood,
organs, organ packages
S 3/S 6
1% (v/v) S 3 added to
S 15
S 49
Surface treatment
(dyed or transparent; shiny)
1% (v/v) S 3 added to
S 49
S 14 Red
100 p.b.w. E 12
28 p.b.w. E 1
20 p.b.w. AE10
1224 h (depending on
amount and temperature)
S 3/S 6
AS 70
(surface
pretreatment)
Epoxy Resins:
E 12
(E 12/E 1)
E 12
(E 12/E 1)
E1
AE 10
E1
AE 10
AE 30
E 12
(E 12/E 6)
E6
E 600
E 12
(E 12/E 7)
Ground sections
E7
E 700
AE 10
95 p.b.w. E 12
26 p.b.w. E 1
5 p.b.w. AE 30
20 p.b.w. AE 10*
100 p.b.w. E 12
50 p.b.w. E 6
0.5 vol.-% E 600
(relative to total
amount)
100 p.b.w. E 12
70 p.b.w. E 7
0.2% (v/v) E 700 (relative
1224 h (depending on
amount and temperature)
to total amount)
10 p.b.w. AE 10
E 13
E8
100 p.b.w. E 13
58 p.b.w. E 8
E 20 Plus
E 20 Plus MEK
Hardener AE 10
A4
2% (v/v) A 4 added to
P 40
Polyester-Copolymer:
P 40
*The E 12/E 1-Impregnation mixture contains 20 p.b.w. AE 10. The mixture for filling the flat chamber, however, contains no AE 10.
20
Polymer
Silicones:
Stability1
Notes
S 10
S 10:
15 kg
50 kg
S 3:
0.15 L
0.5 L
S 6: approx. 1 L for each 10 kg S 10
S 10, S 3, S 6:
1 year
S 10 B
Reddish
S 10 B:
15 kg
50 kg
S 3:
0.15 L
0.5 L
S 6: approx. 1 L for each 10 kg S 10 B
S 10 B Reddish, S 3,
S 6: 1 year
S 15
S 15:
15 kg
50 kg
S 3:
0.15 L
0.5 L
S 6: approx. 1 L for each 10 kg S 15
S 15, S 3, S 6: 1 year
S 49
S 49:
S 3:
S 49: 1 year
S 14 Red
S 14 Red: 1 kg
S 1:
0.1 L
S 14 Red, S 1: 1 year
0.5 kg
0.15 L
Epoxy Resins:
E 12
(E 12/E 1)
E 12:
E 1:
AE 10:
5 kg
1.5 kg
1 kg
30 kg
9 kg
6 kg
E 12, E 1, AE 10:
1 year
E 12
(E 12/E 1)
E 12:
E 1:
AE 30:
AE 10:
5 kg
1.5 kg
0.3 kg
1 kg
30 kg
9 kg
1.8 kg
6 kg
E 12, E 1, AE 10:
Warm crystallized E 12 to 5070C (120
1 year
160F) before use. Add hardener only after
AE 30: 6 months at
0C to +5C (+32F to cooling.
+40F)
E 12
(E 12/E 6)
E 12:
E 6:
E 600:
5 kg
2.5 kg
0.1 L
E 12, E 6, E 600:
1 year
E 12
(E 12/E 7)
E 12:
E 7:
E 700:
AE 10:
5 kg
4 kg
0.02 kg
1 kg
E 12, E 7, E 700,
AE 10: 1 year
E 13
E 13:
E 8:
5 kg
3 kg
E 13, E 8: 1 year
E 20 Plus
E 20 Plus: 1 kg
E 20 Plus Hardener:
E 20 Plus, E 20 Plus
Hardener: 1 year
0.6 kg
Polyester-Copolymer:
P 40
P 40:
A 4:
5 kg
0.1 L
30 kg
0.6 L
P 40, A 4:
Always store P 40 and Hardener A 4 in a cool
6 months at 0C to
place. Cure P 40 with A 4 or solely with UV-A.
+5C (+32F to +40F)
HD02A1.0 Acetonometer Scaled glass areometer for the determination of the acetone concentration in
acetonewater mixtures on a fine (90%100%) scale. Calibrated at +20C (+70F). Length approx. 390 mm
(15.3 in). Measurements are taken with the included graduated cylinder. The percentage volume of
acetone is read directly from the immersion level.
Item #
HD01A1.0
HD02A1.0
Product
Acetonometer 0%100%
Acetonometer 90%100%
Unit
1 piece
1 piece
Product
Digital Thermometer
Unit
1 piece
22
HD04A1.0 Stainless Steel Drum Capacity: 100 L (26 gal); diameter: 590 mm (23 in); height: 450 mm (18 in;
outer dimensions); weight: 11.9 kg (26 lb). Suitable for small to medium specimens as well as for organ and
body slices (with Wire Basket HD06A1.0 as drum insert for stacking of slices). Freezer HK05A1.0 will hold
two of these drums. Freezer HK06A1.0 will hold up to three.
HD05A1.0 Stainless Steel Drum Capacity: 150 L (39 gal); diameter: 590 mm (23 in); height: 670 mm (26 in;
outer dimensions); weight: 15 kg (33 lb). Suitable for all larger specimens as well as for organ and body
slices (with Wire Basket HD06A1.0 as drum insert for stacking of slices). Freezer HK06A1.0 will hold three of
these drums.
Item #
HD03A1.0
HD04A1.0
HD05A1.0
Product
Stainless Steel Drum, 35 L
Stainless Steel Drum, 100 L
Stainless Steel Drum, 150 L
Unit
1 piece
1 piece
1 piece
Item #
HD16A1.0
HD17A1.0
Product
Conveyor Pump for Acetone (Pneumatic)
Conveyor Pump for Acetone (Electric)
Unit
1 piece
1 piece
Product
Wire Basket, Angular
Unit
1 piece
23
HD08A1.0 Sorting Mesh Fine polymer netting, solvent resistant. For enclosure of loose parts (e.g., tarsal
bones) of an entire specimen that should remain together during plastination to avoid time-consuming
reallocation later on. Mesh width: 3 mm 4 mm (0.11 in 0.15 in); total width: 210 cm (82.6 in).
Item #
HD08A10.0
Product
Sorting Polymer Mesh, folded
Unit
1 piece
Dimensions
10 2.10 [m]
HD12A50.0 Separating Grid For separation of single slices during dehydration and degreasing. Soft,
flexible material with flow lines on both sides for optimum liquid exchange. Insert grid between individual
body slices when stacking specimens.
HD14A50.0 Stabilizing Grid For stabilizing a stack of specimens during dehydration and degreasing. Insert
a grid into the specimen stack every 10 to 15 body slices.
Item #
HI15A50.0
HD12A50.0
HD14A50.0
Product
Plastic Gauze
Separating Grid (Plastic)
Stabilizing Grid (Plastic)
Unit
50 pieces
50 pieces
50 pieces
Dimensions
35 26.5 [cm]
35 26.5 [cm]
35 26.5 [cm]
HD20A1.0 Stainless Steel Frame with Inserts for Brain Slices For plastination of brain slices with P 40.
Item #
HD20A1.0
Product
Stainless Steel Frame with Inserts for Brain
Slices
24
Unit
1 piece
Item #
HI01A1.0
Product
Plastination Unit, Small (pump 230 V)
Unit
Set
HI03A1.0 Heidelberg Plastination Kettle, 100 L (26 gal) Stainless steel. Height: 455 mm (18 in); diameter:
590 mm (23 in; outer dimensions). Design equivalent to HI02A1.0; four fittings and glass cover (650 mm
650 mm / 25 in 25 in) for visual monitoring of the impregnation process. Silicone seal and 3 m (120 in) of
Vacuum Tubing HI07A1.0 included.
Plastination Kettle HI03 is suitable for the plastination of specimens of medium size and of organ and body
slices. For vacuum generation we recommend a vacuum pump with a displacement of 6 m3/h (page 29).
Freezer HK06A1.0 (page 38) is suitable for cooling. Impregnation Container HS30A1.0 (page 30) for stacked
slices is suitable for this plastination kettle.
25
Item #
HI02A1.0
HI03A1.0
HI04A1.0
HI06A1.0
HI22A1.0
HI23A1.0
Product
Heidelberg Plastination Kettle, 35 L
Heidelberg Plastination Kettle, 100 L
Replacement Lid Sealer for HI02A1.0
Replacement Lid Sealer for HI03A1.0
Replacement Glass Plate for HI02A1.0
Replacement Glass Plate for HI03A1.0
Unit
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
Vacuum Chambers for Plastination Freezer inserts made from stainless steel for forced impregnation.
One side has straight, small flange fittings for vacuum tubing for connecting a manometer, a vacuum
adjustment device, and a vacuum pump. The cover is made from 10-mm-thick (0.4-in-thick) safety glass,
so that the impregnation process can be monitored and controlled. The glass cover is supported by a
stainless steel insert.
HI24A1.0 Vacuum Chamber, Small To accommodate specimens up to the size of a lower extremity.
Inner dimensions: approx. 118 cm 27 cm 56 cm (46 in 11 in 22 in; l d h); fits Freezer HK05A1.0.
Includes 3 m (120 in) of Vacuum Tubing (HI07A1.0). We recommend a vacuum pump with a displacement
of 10 m3/h (see page 29).
HI26A1.0 Replacement Glass Plate For Vacuum Chamber, Small HI24A1.0, upon request.
HI25A1.0 Vacuum Chamber, Large Inner
dimensions: approx. 156 cm 50 cm 57 cm
(61 in 19 in 22 in; l d h), suitable for large
specimens such as entire trunks. Fits Freezer
HK06A1.0. Includes 3 m (120 in) of Vacuum
Tubing (HI07A1.0). We recommended a vacuum
pump with a displacement of 16 m3/h (see
page 29).
HI27A1.0 Replacement Glass Plate For Vacuum
Chamber, Large HI25A1.0, upon request.
Item #
HI24A1.0
HI25A1.0
HI26A1.0
HI27A1.0
26
Product
Vacuum Chamber, Small
Vacuum Chamber, Large
Replacement Glass Plate for HI24A1.0
Replacement Glass Plate for HI25A1.0
Unit
1 piece
1 piece
1 piece
1 piece
Product
Stainless Steel Basket for HI02A1.0
Vacuum Tubing
Separator for Oil and Solvents
Unit
1 piece
Per meter
1 piece
Dimensions
9.5 5.5 [mm]
27
HI10A1.0 Vacuum Adjustment Valve Simple needle valve for manual control of negative pressure during
forced impregnation via admission of external air.
HI11A1.0 Vacuum Adjustment Unit Consists of a Y-shaped vacuum tubing system with two Vacuum
Adjustment Valves (HI10A1.0). The adjustment unit allows for finer adjustment than a single valve.
Item #
HI10A1.0
HI11A1.0
Product
Vacuum Adjustment Valve
Vacuum Adjustment Unit
Unit
1 piece
1 piece
HI14A1.0
Digital Manometer
Measuring range: 0 mbar to
approx. 1100 mbar; absolute
resolution: 1 mbar. Powered
by 9-V battery (included).
Casing: ABS plastic, black.
Dimensions: 150 mm 86 mm
30 mm (5.9 in 3.4 in
1.2 in; l w d).
HI13A1.0 Bennert Manometer
Item #
HI13A1.0
HI14A1.0
28
Product
Bennert Manometer (incl. blind plug)
Digital Manometer (incl. battery)
Unit
1 piece
1 piece
Product
Polymer Gauze
Unit
50 pieces
Dimensions
35 26.5 [cm]
Vacuum Pumps Rotary vane vacuum pumps, for crude and fine vacuum generation in plastination. One
filling of pump oil is included.
Please contact us if you have questions about pumping of acetone vapor and explosion prevention.
HI18A1.0 Vacuum Pump, 1.5 m3/h For impregnation baths of up to 15 L (4 gal), recommended for the
Small Heidelberg Plastination Kettle HI02A1.0.
HI19A1.0 Vacuum Pump, 6 m3/h For impregnation baths of up to 60 L (8 gal), recommended for the
large Heidelberg Plastination Kettle HI03A1.0.
HI20A1.0 Vacuum Pump, 10 m3/h For impregnation baths of up to 120 L (31.7 gal), recommended for
the Small Vacuum Chamber HI24A1.0.
HI21A1.0 Vacuum Pump, 16 m3/h For impregnation baths of up to 200 L (52.8 gal), recommended for
the Large Vacuum Chamber HI25A1.0.
HI12A5.0 Vacuum Pump Oil Low vapor pressure, suitable for all vacuum pumps offered in our catalog.
Viscosity: approx. 100 mm2/s at 40C (104F).
Item #
HI18A1.0
HI19A1.0
HI20A1.0
HI21A1.0
HI12A5.0
Product
Vacuum Pump, 1.5 m/h (230 V)
Vacuum Pump, 6 m/h (230 V)
Vacuum Pump, 10 m/h (230 V)
Vacuum Pump, 16 m/h (230 V)
Vacuum Pump Oil, 5 L
Unit
1 piece
1 piece
1 piece
1 piece
1 canister
Quantity
5L
29
HI16A1.0 Mixing Rod, Small For mixing of impregnation resins and hardeners. Length: approx. 50 cm
(20 in).
HI17A1.0 Mixing Rod, Large For mixing of
impregnation resins and hardeners. Length: approx.
59 cm (23 in).
Item #
HI16A1.0
HI17A1.0
HI28A1.0
Product
Mixing Rod, Small
Mixing Rod, Large
Vacuum Lifting Pad (for glass plates)
Unit
1 piece
1 piece
1 piece
Dimensions
50 cm
59 cm
Item #
HS01A20.0
HS02A20.0
HS30A1.0
30
Product
Safety Glass Plates, 3 mm
Floating Glass Plates, 2 mm
Impregnation Container for HI03A1.0
Unit
20 pieces
20 pieces
1 piece
Dimensions
350 450 [mm]
350 450 [mm]
375 x 285 x 355 [mm]
Item #
HS03A25.0
HS04A50.0
HS05A50.0
HS07A50.0
HS09A10.0
HS11A10.0
HS13A10.0
Product
Silicone Gasket, 3 mm, rolled
Silicone Gasket, 4 mm, rolled
Silicone Gasket, 5 mm, rolled
Silicone Gasket, 6 mm, rolled
Silicone Gasket, 8 mm, rolled
Silicone Gasket, 10 mm, rolled
Silicone Gasket, 12 mm, rolled
Unit
25 m
50 m
50 m
50 m
10 m
10 m
10 m
HS14A50.0 Polyester Foil Sheets For hardening using the draining method and the sandwich method of
E 12-impregnated transparent body slices. Thickness: 100 m, cut to 40 cm 50 cm (16 in 20 in);
transparent. The sheets are slightly larger than the glass plates, so any superfluous resin can easily drain.
Item #
HS14A50.0
Product
Polyester Foil Sheets 100 m
Unit
50 pieces
Dimensions
40 50 [cm]
Small binder clips (HS17A12.0) are used as a tool for sealing flat chambers
when using P 40.
Item #
HS15A12.0
HS16A12.0
HS17A12.0
Product
Fold-Back Clamps, Large
Fold-Back Clamps, Medium
Fold-Back Clamps, Small
Unit
12 pieces
12 pieces
12 pieces
Dimensions
51 mm
32 mm
19 mm
31
HS18A1.0, HS19A1.0 Hand Clamps For vertical positioning of flat chambers during sheet plastination.
HS19A1.0 length: approx. 15 cm (6 in); HS18A1.0 length: approx. 23 cm (9 in).
Item #
HS18A1.0
HS19A1.0
Product
Hand clamps, Large
Hand clamps, Small
Unit
1 piece
1 piece
Dimensions
23 cm
15 cm
Item #
HS20A10.0
Product
Flat Funnel
Unit
10 pieces
HS22A1.0 Positioning Wire Custom-made, 4-mm-thick stainless steel wire with handle for final
positioning of plastinated organ and body slices in flat chambers freshly filled with resin. Length: 50 cm
(20 in).
Item #
HS21A1.0
HS22A1.0
Product
Deaeration Wire
Positioning Wire
Unit
1 piece
1 piece
Dimensions
40 cm
50 cm
HS23A50.0 and HS25A50.0 Silicone Tubing: Because of its high elasticity, silicone tubing is particularly
suitable for sealing flat chambers during plastination of brain slices. The tubing also facilitates the removal
of air bubbles from resin-filled chambers.
Item #
HS23A50.0
HS25A50.0
32
Product
Silicone Tubing for 4-mm brain slices
Silicone Tubing for 6-mm brain slices
Unit
50 m
50 m
HS27A0.2 BIODUR Sealant Polymer paste for sealing flat chambers using P 40.
Item #
HS27A0.2
Product
BIODUR Sealant (P 40)
Unit
1 can
Quantity
0.2 kg
Technical Specifications:
Blade diameter:
Knife speed:
Max. cutting capacity:
Slice adjustment:
External dimensions:
Working area:
Electrical protection:
Weight:
Electrical characteristics:
AC Single-Phase
AC Three-Phase
HS29A1.0 Special Band Saw for Sheet Plastination Stainless steel, with cooled stop, especially suitable
for cutting of whole-body slices with low slice thickness. Stop is easy to disassemble for cutting thicker
slices. Available upon request.
Item #
HS28A1.0
HS29A1.0
Product
Rotary Slicer (for brain and organ slices)
Band Saw for Sheet Plastination
Unit
1 piece
1 piece
33
Product
Membrane Pump for Gas Curing (230 V)
Unit
1 piece
HH02A1.0 UV-A Curing Unit Suitable for curing brain slices impregnated with polyester resin. Closed
aluminum construction, with internal tray for receiving a flat chamber. Fan for heat removal. Dimensions:
approx. 950 mm 730 mm 640 mm (18.9 in 18.5 in 21.2 in; w d h). Weight: approx. 60 kg (94.8 lb).
Item #
HH02A1.0
34
Product
UV-A Curing Unit (230 V)
Unit
1 piece
HH07A1.0 Gas Curing Unit, Small Consists of Small Gas Curing Box Unit HH11A1.0 and Supply Unit
HH10A1.0.
HH08A1.0 Gas Curing Unit, Medium Consists of Medium Gas Curing Box Unit HH12A1.0 and Supply Unit
HH10A1.0.
HH09A1.0 Gas Curing Unit, Large Consists of a Large Gas Curing Box Unit HH13A1.0 and Supply Unit
HH10A1.0.
35
HH12A1.0 Gas Curing Box, Medium For curing of medium silicone-impregnated specimens. The package
includes the box with fan, two stainless steel draining grids, two stainless steel collecting trays, two glass
jars, air tubing, and power cord. Inner dimensions: approx. 1100 mm 750 mm 500 mm (43.3 in 29.5 in
19.7 in; w d h).
HH13A1.0 Gas Curing Box, Large For curing of large silicone-impregnated specimens. The package
includes the box with fan, three stainless steel draining grids, three stainless steel metal trays, three glass
jars, air tubing, and power cord. Inner dimensions: approx. 1650 mm 750 mm 670 mm (65 in 29.5 in
26.3 in; w d h).
36
Item #
Product
Unit
HH07A1.0
HH08A1.0
HH09A1.0
HH10A1.0
HH11A1.0
HH12A1.0
HH13A1.0
1 set
1 set
1 set
1 piece
1 piece
1 piece
1 piece
Inner Dimensions
[mm]
Power: 400-V three-phase current; overall energy consumption: 5.6 kW. Power cord: 3 m,
including CEE plug.
Air circulation, horizontally guided and distributed evenly around each shelf
Item #
HH06A1.0
Product
Convection Heat Cabinet (400 V)
Unit
1 piece
37
Plastination Deep-Freezers
HK05A1.0, HK06A1.0 Special Freezers for Plastination With glass sliding lid, 23C (9F), stationary,
suitable for freeze-substitution with acetone and for forced impregnation. Outer paneling: brushed
stainless steel; interior paneling: stainless steel. See table on page 39 for technical specifications. Unless
otherwise specified in your order, the freezer will have four holes drilled into the short side facing the wall,
so that vacuum tubing can be inserted (HI07A1.0, page 27). BIODUR freezers are adapted to the special
needs of plastination: The bottom has been reinforced by a metal plate, and the refrigeration unit has been
removed and placed together with the temperature control unit in a separate case.
For protection from explosion, the freezer and the compressor housing should be set up in
neighboring rooms. Thus, potential ignition sources are kept away from the actual working area in
which flammable solvents will be used. The operator is responsible for complying with all national,
state, local, and institutional safety regulations!
Freezer and refrigeration unit are connected by two refrigerant pipes and the cable for the temperature
sensor. Thus, the wall between freezer and refrigeration unit has to be equipped with a suitable opening
for these pipes and cable. All connections (pipes and cable) are manufactured in 2 m (78.7 in) length;
variations are possible upon request. Contact us for more details on setting up the freezers.
Item #
HK05A1.0
HK06A1.0
38
Product
Plastination Deep-Freezer, 650 L (230 V)
Plastination Deep-Freezer, 800 L (230 V)
Unit
1 piece
1 piece
HK05A1.0
HK06A1.0
(77 in 26 in 25 in)
Stainless steel
Stainless steel
Dimensions of housing
for cooling unit (l w h)
Approx. capacity
Approx. weight
Noise level
<70 db(A)
typical: 52 db(A)
<70 db(A)
typical: 52 db(A)
Electrical Specifications
Voltage/frequency
230 V/50 Hz
230 V/50 Hz
Nominal current
2.3 A
2.3 A
Fuse
16 A
16 A
7.4 kWh/24 h
7.9 kWh/24 h
Protection
IP23
IP23
Refrigerant Circuit
Refrigerant/amount
Connecting lines
Range of adjustment
from to
23C to 18C
9F to 0.4F
23C to 18C
9F to 0.4F
+16C to +35C
+60.8F to +95F
+16C to +35C
+60.8F to +95F
39
Other Accessories
HA01A1.0 Heidelberg Plastination Folder Plastination manual in German. Author: Gunther von Hagens.
1985 edition, 160 pages.
HA02A1.0 Heidelberg Plastination Folder Plastination manual in English. Author: Gunther von Hagens.
1985 edition, 160 pages.
Item #
HA01A1.0
HA02A1.0
Product
Heidelberg Plastination Folder (German)
Heidelberg Plastination Folder (English)
Unit
1 piece
1 piece
HA04A1.0 Converter 110 V230 V, 1000 VA Voltage converter necessary for use by any electrical
equipment components in regions with 110-V mains voltage. Suitable, for example, for operation of
Vacuum Pump HI19A1.0 (6 m3/h) or Special Freezers for Plastination HK05A1.0 and HK06A1.0.
HA05A1.0 Converter 110 V230 V, 1500 VA Voltage converter necessary for use by any electrical
equipment components in regions with 110-V mains voltage. Suitable, for example, for operation of
Vacuum Pump HI21A1.0 (16 m3/h).
Item #
HA03A1.0
HA04A1.0
HA05A1.0
Product
Converter 110 V230 V/500 VA
Converter 110 V230 V/1000 VA
Converter 110 V230 V/1500 VA
Unit
1 piece
1 piece
1 piece
HA06A1000.0 Adhesive Foil For the protection of E 12-impregnated or P 40-impregnated slices against
scratching during the sawing process. Thickness: 50 m; width: 40 cm (16 in); transparent.
HA07A300.0 Stretch Foil, Transparent Multipurpose tool for the plastination laboratory, such as
temporary protection for slices. Width: 50 cm (20 in); transparent.
Item #
HA06A1000.0
HA07A300.0
40
Product
Adhesive foil, 50 m
Stretch foil, transparent
Unit
1 roll
1 roll
Dimensions
1000 m 40 cm
300 m 50 cm
HA11A1.0 Bucket
Item #
HA11A10.0
Product
Bucket, Rectangular, 19 L
Unit
10 pieces
Item #
HA12A1.0
HA13A1.0
Product
Latex Gloves
Solvent-Resistant Gloves
Unit
1 pair
1 pair
Dimensions
62 cm
34 cm
41
Maximum Specimen
Size (Approximate)
Specimens/Month
(Approximate)
Silicone S 10
Standard
Method
(Small Set)
Up to the size of a
human head
15 kg (33 lb)
Silicone S 10
Standard
Method
(Medium Set I)
Up to the size of
horizontal body
slices at shoulder
level
35 kg (77 lb)
Silicone S 10
Standard
Method
(Medium Set II)
Up to the size of a
human lower
extremity (including
hip)
70 kg (154 lb)
Silicone S 10
Standard
Method
(Large Set)
Up to the size of a
human trunk
HK05A1.0
HI01A1.0
HI05A1.0
HD03A1.0
HD01A1.0
HD02A1.0
HH07A1.0
HK06A1.0
HD04A1.0
HD05A1.0
HD01A1.0
HD02A1.0
HI03A1.0
HI19A1.0
HI11A1.0
HI08A1.0
HI13A1.0
HH08A1.0
HK05A1.0
HD21A1.0
HD01A1.0
HD02A1.0
HI24A1.0
HI20A1.0
HI11A1.0
HI08A1.0
HI13A1.0
HH09A1.0
HK06A1.0
HD22A1.0
HD01A1.0
HD02A1.0
HI25A1.0
HI21A1.0
HI11A1.0
HI08A1.0
HI13A1.0
HH09A1.0
42
Digital Thermometer HD19A1.0 (for temperature control during forced impregnation process)
Solvent-Resistant Gloves HA13A1.0
Mixing Rod, Small HI16A1.0 or Large HI17A1.0 (for stirring polymer mixtures)
For polymer mixtures: Latex Gloves HA12A1.0 (for manipulation of specimens in silicone)
Conveyor Pump HD16A1.0 (pneumatic) or HD17A1.0 (electric), for safe transfer large amounts of acetone
Vacuum Lifting Pad HI28A1.0, to facilitate lifting of glass plates from plastination kettles or vacuum chambers
Method
Sheet plastination
P 40 method
Sheet plastination
E 12 technique with
sandwich method
Sheet plastination
E 12 technique with
flat chamber method
Maximum
Specimen Size
(Approximate)
Specimens/Month
(Approximate)
Depending on the
size of the
available
dehydration and
impregnation
containers as well
as on the number
of flat chambers
Horizontal body
slices from the
trunk region
Depending on the
size of the
available
dehydration and
impregnation
containers
Horizontal body
slices from the
trunk region
Depending on the
size of the
available
dehydration and
impregnation
containers as well
as on the number
of flat chambers
Hand Clamps, Large (HS18A1.0) or Small (HS19A1.0), for vertical positioning of flat chambers.
Adhesive foil HA06A1000.0, for the protection of cured slices against scratching.
43
44