Professional Documents
Culture Documents
Getting Started With: Gadgeteer Club
Getting Started With: Gadgeteer Club
Getting Started With: Gadgeteer Club
Potentiometer
USB Host
Ethernet
Debug LED
Reset Button
X or Y
We need.
Main board
Power board
Screen
Button
Camera module
We could also add an SD card.later.
Open Microsoft Visual Basic 2010 Express, and select New Project from the Start Page.
(Alternatively, select File > New Project).
Select Gadgeteer from the list of Installed Templates, then select .NET Gadgeteer
Application. You can give your project a name, then select OK.
Designer Tab
(Program.gadgeteer)
Solution Explorer
(Project Files)
Code Tab
(Program.vb)
Designer Tab
(Program.gadgeteer)
Toolbox
Select camera
When the camera has captured a picture, use the displays SimpleGraphics
to display the image.
What happens?
Be patient.
In the output window you will see messages about
debugging and rebooting.
The program is being transferred to the main board,
which will then reboot itself and run the program.
You will know it has done this (and is ready) when it
says Program Started in the window.
ONLY THEN CAN YOU TEST YOUR CAMERA.
Use the prompts and drop-down lists to discover and select the appropriate
parameters.