Professional Documents
Culture Documents
Silyzer-200-PEM Based Electrolyser For Hydrogen Generation
Silyzer-200-PEM Based Electrolyser For Hydrogen Generation
Silyzer-200-PEM Based Electrolyser For Hydrogen Generation
Sales slides
siemens.com/hydrogen-electrolyzer
Yesterday
Today
Solution
efficient integration of
renewables and avoidance
of energy waste by making it
long-term storable
commitment to CO2
reduction targets, constant
growth of hydrogen market
innovative e-mobility
concepts
12.02.2015
PD LD HY S
12.02.2015
PD LD HY S
Increasing revenues
+
and turnover
due to extremely dynamic
operation behavior, SILYZER
can be used as a load within
intelligent energy management
systems (EMS) for the grid
Environmental protection +
local onsite production of
CO2-free hydrogen without
using hazardous material,
such as caustic potash,
avoids extensive transports
Optimization of costs
+
low OPEX and total Costs of
Ownership (TCO) due to
minimal installation efforts,
maintenance-free stacks,
clean and safe operation,
robustness, pressurized mode
until 35 bar, lifetime specified
with more than 80.000 hours
Investment protection
+
utilization of wind energy
turbines or solar panels
even during forced
curtailment periods due to
grid imbalance increases
operation hours and delivers
hydrogen as a valuable
product further more
12.02.2015
PD LD HY S
12.02.2015
PD LD HY S
12.02.2015
PD LD HY S
Benefit
Dynamic, flexible
behavior; operation
connectable to volatile
power generation
(wind/solar)
No pre-heating or holding
needed; load ramps not
limited; match with any
gradients; time to reach
power set point: 10 sec.
No investment for
compressor units necessary;
no further requirements or
safety precautions
www.siemens.com/hydrogen-electrolyzer
https://www.youtube.com/watch?v=fKgLMvVuUA
12.02.2015
PD LD HY S
Maintenance
No caustic potash
No leaching
Dynamic
Size
No precipitation
+
+
Operating costs
Lifetime
Operability
Construction
Modular, scalable
Pressure
Industrial standards
Unrestricted / Siemens AG 2015. All Rights Reserved.
Page 8
12.02.2015
PD LD HY S
PEM
1.25 MW
Dimension Skid
< 10 sec
Output pressure
Up to 35 bar
Purity H2
(depends on operation)
99.5% - 99.9%
H2 Quality 5.0
DeOxo-Dryer option
Rated H2 production
225 Nm/h
65 70 %
> 80.000 h
17 t
CE-Conformity
yes
1,5 l / Nm H2
12.02.2015
PD LD HY S
Connection to 10 MW wind-farm
Next steps:
Commissioning 1st half 2015
Unrestricted / Siemens AG 2015. All Rights Reserved.
Page 10
12.02.2015
PD LD HY S
12.02.2015
PD LD HY S