Professional Documents
Culture Documents
Reset Service Indicator 08 2012
Reset Service Indicator 08 2012
1 maintenance indicator
2 Service button
A1 Instrument cluster
A1p13 Multifunction display
1. Switch on ignition. The following steps must be completed within 10 s of the
appearance of the maintenance indicator (1) in the multifunction display (A1p13) in
the instrument cluster (A1), otherwise the procedure must be repeated.
2. Push service button (2) until the maintenance indicator (1) appears in the
multifunction display (A1p13) in the instrument cluster (A1)
3. Push service button (2) at instrument cluster (A1) and switch ignition off
Press and hold down service button (2). During this time, the maintenance
indicator (1) is not replaced by other indicators in the multifunction display
(A1p13).
4. Switch on ignition and hold down service button (2) on the instrument cluster (A1).
After this is performed, the maintenance indicator (1) shows the remaining distance
(starting distance) for the next maintenance interval.
5. Switch off ignition
1 maintenance indicator
A1 Instrument cluster
1. Switch on ignition
2. Select service indicator in the multifunction display on the instrument cluster (A1)
Press button (1) on the instrument cluster (A1) twice within the first 4 seconds.
3. Switch off the ignition within approx. 10 seconds.
4. Press button (1) on the instrument cluster (A1)
5. Switch on ignition and keep button (1) on the instrument cluster (A1) pressed further
6. Wait until the service indicator flashes and then jumps back to "0"
The service indicator is reset.
7. Release button (1) and after this switch off the ignition
or
Multifunction display.
3. Press cluster illumination button (1) 3 times in short succession. The battery
voltage will be displayed
4. Press the up
5. Use the
and
6. Press button
Confirmed.
8. Press buttons
9. Use the
or
and
and
buttons.
12. Select Oil grade 229.5, to confirm you have used MB approved engine oil.
13. Exit by switching off ignition
14. Using buttons
or
or
Multifunction display.
3. Press cluster illumination button (1) 3 times in short succession. The battery voltage
will be displayed and an audible signal will sound.
4. Turn key in ignition to position 2
5. Press the up
6. Press cluster illumination button (1) once. The Oil Type menu is displayed.
7. Use the
8. Press the up
and
Models 166, X166, 172, 204, X204, 207, 212 and 218
(M-, SLK-, C-,GLK-, E-, and CLS-Class)
6. Press
.
. The display
8. Press
Display.
3. Press and hold Reset Button R (1) until the Service Menu is displayed.
4. Use buttons
5. Press buttons
and
or
2.
Press buttons
or
Press cluster illumination button (1) 3 times in short succession. The battery
voltage will be displayed
4.
Press the up
5.
Use the
6.
Press
7.
and
Confirmed.
10
or
Press buttons
Multifunction display.
3.
Press reset button (1) 3 times in short succession. The battery voltage will be
displayed
4.
Press the up
5.
Use the
6.
Press button
7.
and
Confirmed.
11
4. Press
5. Press
6. Press
12
2.
Press buttons
or
Multifunction display.
3.
Press cluster illumination button (1) 3 times in short succession. The battery
voltage will be displayed
4.
Press the up
5.
Use the
6.
Press
7.
and
Confirmed.
13
or
14
or
3. Press button
oir
4. Press button R (1) for approximately 5 seconds. The message "Service interval...
Reset: Press reset button for 3 seconds" appears.
5. Press and hold button R (1) for approximately 3 seconds to confirm.
6. Switch off ignition and remove key.
15
or
Multifunction display.
17. Press cluster illumination button (1) 3 times in short succession. The battery
voltage will be displayed
18. Press the up
19. Use the
20. Press button
/
and
Confirmed.
16