Professional Documents
Culture Documents
Hari Resume Execution
Hari Resume Execution
HARI KRISHNAN
No.196/143, South Street,
Kottaipatti,
Srivilliputtur (P.o),
Virudhunagar (Dt).
Email-id: krishphk1992@gmail.com.
Ph.No : (+91)8122276625.
CAREER OBJECTIVE:
Seeking a Position to utilize my skills and abilities in the Industry that offers professional
growth while being resourceful, innovative and flexible.
EXPERIENCE IN BRIEF:
Execution engineer having 1.5+ years of experience in Oil & Gas Industry expertise in
Power Cycle Piping & Process Piping.
PRESENT EMPLOYER:
COMPANY
CLIENT
ROLE
DURATION
PREVIOUS EMPLOYER:
COMPANY
CLIENT
ROLE
DURATION
JOB PROFILE:
Responsible for fabrication and erection of piping as per the Isometrics proposed by the
Client.
Fabrication and erection had done with various pipes like ( CS,SS,AS,AND GI)
Erection of pipes drawing as per the field routing proposed by the client.
Carried out Erection of static equipments like Heat Exchangers, Vessels, Drums and
Column type equipments.
Maintenance works on Heat Exchangers (Shell and tube type) like replacement of nozzle,
inspection of Tubes, Plugging of tubes and shell testing.
Erection of surge tank over flow drain line water and cooling water lines as per the
isometrics proposed by the client.
PIPING INSPECTION:
Raw material Visual inspection & test certificates review refer with ASME sections
Ensuring correct Line no, joint no, Material specification & grade as per design &
drawing.
If required pre heating and ensuring the temperature with thermal chalk and graph chart.
Weld visual inspection
Welder no, Slag, spatter, bead length & single or multi layer then shrinkage & good
penetration or not,
Check surface & during welding ensure electrode heated or not and performer qualified
or not.
If required post heating and ensuring the temperature with thermal chalk and graph chart.
( soaking hrs)
Stress relieving & Hardness inspection
After welding if required ensure stress relieving process & temperature range, soaking
hrs according to material specification. Witness & review SR chart. Hardness value
ensure within the limit or not.
NDT Inspection:
Hydro test
Before hydro test ensuring mechanical clearance & line history sheet has been completed
or not and then water test certificate, pressure gauge calibration certificate & range.
After hydro test, water & air flushing inspection & air moisture inspection witness with
hydro meter.
SHUTDOWN EXPERIENCE:
PAST ASSIGNMENT: 01
COMPANY
CLIENT
PROJECT
ROLE
DURATION
PAST ASSIGNMENT: 02
COMPANY
CLIENT
PROJECT
ROLE
DURATION
EDUCATIONAL QUALIFICATION:
Examination
Discipline/
Specialization
School/
College
B.E
Mechanical
Engineering
H.S.C
Bio-Maths
Stream
S.S.L.C
S.S.L.C
Jeppiaar Engineering
College, Chennai.
K.V.S. Matric Higher
Secondary School,
Virudhunagar.
N.A.A.M Higher
Secondary School,
Rajapalayam.
Board/
University
Year of
Passing
Percentage
Anna University
2013
78.1
State Board
2009
82.83
State Board
2007
87.2
TECHNICAL SKILLS:
COMPUTER SKILLS:
Soft Skills
MINI PROJECT:
TITLE: AUTOMATIC SIDE-STAND RETRIEVE SYSTEM.
In motorbikes negligence to retrieve the side-stand is also a reason for accidents. Since
modern bikes use self-motor for starting purpose, the self- motor can be used along with simple
gear-meshing mechanism to retrieve the Side-stands of the bikes automatically.
MAIN PROJECT:
TITLE: DESIGN AND ANALYSIS OF CHASSIS & UPRIGHT OF AN
ALL TERRAIN VECHICLE.
ATV is an off road vehicle in which we have designed chassis and upright to withstand
the maximum possible stress and reduced the deflection in collision on front and rear impact by
using trial and error method with the help of ANSYS software.
PERSONAL DETAILS:
Name
Date of Birth
Fathers name
Passport No.
Nationality
Address
DECLARATION:
I hereby declare that the above-mentioned information is correct up to my knowledge and
I bear the responsibility for the correctness of the above-mentioned particulars.
Place: Chennai.
Signature
Date:
(P.HARI KRISHNAN)