Professional Documents
Culture Documents
Khc3b4ng De1baa7u Catalog HC E102v DSP General Revision
Khc3b4ng De1baa7u Catalog HC E102v DSP General Revision
Khc3b4ng De1baa7u Catalog HC E102v DSP General Revision
Canada
Russian Federation
Germany
Korea
India
China
Thailand
Malaysia
Indonesia
U.S.A
Japan
Philippines
Philippine
Viet Nam
Singapore
Mexico
Australia
India
China
Indonesia
Malaysia
Philippines
Europe
Germany
Singapore
Russian Federation
Thailand
Viet Nam
Latin America
Mexico
North America
U.S.A.
Products described in this catalog may differ from different countries or regions. Contact your nearest Hitachi representative office for details.
Product appearances and specifications in this catalog are subject to change with or without notice, as Hitachi continues to develop the latest technologies and products for its customers.
ISO 8573-1
ISO 8573-12010
CLASS 0 TV Approval
ISO-8573-1
Model List
160--180C
Ventilation Fan
Dryer
Exhaust
Aircooled
15
22
30
(kW)
37
45
55
75
90
100
Built-in
Aircooled
Built-in
Watercooled
Built-in
Dryer
First Stage
Air End
Intercooler
Second Stage
Air End
Hi-precooler
Aftercooler
-120 132
240 1
Watercooled
Aircooled
15
22
30
37
45
55
(kW)
75
90
100
-120 132
240 1
Built-in
100
100
50
50
Single-stage
Two-stage
Comparison of
Maintenance Cost (%)
(Annual average)
Single-stage
Two-stage
Comparison of
Initial Cost (%)
Built-in
2
Watercooled
Watercooled
Aircooled
by hi-precooler.
Two-stage
Hi-precooler System
Two-stage
Built-in
: V plus
: NEXT Series
1 132, 145, 160, 200 and 240kW
2 160 and 240kW
Control Panel
For V-type model, variable speed drive and air capacity control are all originally designed by Hitachi. Control system which enables to control the discharge
pressure within 0.01MPa, not only makes high response to the load possible, but also achieve great effect of Energy-Saving together with outstanding stability.
Cooler
(V-type ONLY)
Pressure
Conventional Model
0.60
Necessary Pressure
V-type
(Constant Pressure Control)
Air-End
Energy-Saving
MPa
0.70
Suction Filter
0.01MPa
Pursuit of Energy-Saving
9.4
8%up
ECOMODE
13.2
12.8
3%up
100kW
18.3
16.8
8%up
(m3/min)
Pressure
Low Noise
Low noise achieved by the low-noise rotor profile, adoption of vibrationproof driving system and low-noise structure of suction and exhaust.
Air-Cooled, 0.7MPa, Fixed Speed Model
55kW
7dB
Down
Down
6dB
69
Down
DSP
DSP
100
Shaft Seal
Inter-cooler
Shaft Seal
2nd Stage
Purging
2
1.5
About 50%
EnergySaving
1
0.5
1.8
0.9
0.6
100% Load
80% Load
(55kW)
kW
kW
Cooling Fan
kW
1.2
kW
Inter-cooler
About 50%
EnergySaving
100% Load
DSP
80% Load
(75kW)
Air-End
Main Motor
Time
Environment Response
69
68
Conventional
Model
80
63
Conventional
Model
60
Suction Filter
Energy-Saving Effect
76
74
DSP
100kW
6dB
62
Unnecessary
compression
is avoided.
Power
70
40
75kW
74
66
dB(A)
76
20
Retry function when minor failure occurs is equipped as standard on DCBL controller. Retry is performed up to 3 times
according to the judgment by itself when the motor trips. So it is possible to eliminate the influence to the operation of the
compressor from outside disturbance.
75kW
Cascade Vector Control (in line form) as the DCBL motor control system achieve both significant Energy-Saving and
excellent reliability.
Line-Up of Variety
8.7
Calculation condition:
75kW V-type (0.7MPa SPEC),
0.6MPa as necessary pressure,
8,000h/year operation, 60% load rate
DSP
V-type
20
55kW
14% Down
DSP
40
Gear Casing
Conventional
Model
60
Starter Panel
Output
Conventional
Load/Unload Type
80
Time
High Capacity
Conventional
Model
DSP
Time
Dual Operation
Multi-Unit Control Operation
AUTO Operation
Communication Function
Stop Switch
Start Switch
0.93
0.70
0.93
0.70
0.93
0.70
0.93
0.70
0.93
0.70
0.93
6.2 / 6.5
9.2
7.2 / 7.7
13.0
10.5 / 11.1
7.5 / 7.9
6.4 / 6.7
9.4
7.4 / 7.9
13.2
10.7 / 11.3
Nominal Output
kW
Motor Type
Discharge Temperature
2 (Flange)
L/min
DSP-100VA5MN
DSP-55VWT[R]N
DSP-75VWT[R]N
DSP-100VW5MN
DSP-55VAT[R]N
DSP-75VAT[R]N
MPa
0.70
0.93
0.70
0.93
0.70
0.93
0.70
0.93
0.70
0.93
0.70
m3/min
9.3
7.7
12.6
10.9
18.0
15.4
9.5
8.0
12.9
11.4
18.3
9.6
9.3
13.0
12.6
9.8
9.5
13.4
13.0
ItemUnit
Cooling Method
Discharge Pressure
Capacity
DSP-100VA6MN
Water-cooled
Air-cooled
DSP-100VW6MN
0.93
15.6
Nominal Output
kW
Motor Type
Discharge Temperature
2 (Flange)
L/min
Starting Type
Driving Method
55
100
75
DCBL Motor
55
2 (Flange)
Soft Start
Inverter
25 (Not filled)
[ 2.2 ]
16 (Not filled)
0.2 2
[ 10 (Under Pressure) ]
[ 2.2 ]
[ 3.0 ]
[ R407C ]
kg
1,340 [1,490]
1,560 [1,730]
2,350
mm
2,0001,3001,800
2,2501,300 1,800
65
Inverter
0.05 2
[ R407C ]
63
Soft Start
15 (Not filled)
[ 3.0 ]
11/2
1.5 2
[ 10 (Under Pressure) ]
kW
11/4
26 (Not filled)
2.2
67
68
69
2 (Flange)
120
90
35 or below
11/4
Star-Delta (3 contact)
Star-Delta (3 contact)
Driving Method
25 (Not filled)
2.2
0.05 2
[ 10 (Under Pressure) ]
[ 10 (Under Pressure) ]
[ 2.2 ]
kW
[ 3.0 ]
[ R407C ]
kg
1,500 [1,650]
1,790 [1,960]
mm
2,0001,3001,800
2,2501,3001,800
dB(A)
[ 3.0 ]
[ 2.2 ]
[ R407C ]
Dimensions (W D H)
15 (Not filled)
1.5
kW
63
65
63
65
1,640 [1,810]
1,480 [1,630]
2,0001,3001,800
68
63
63
65
66
DSP-90A5L(M)N
DSP-100A5L(M)N
DSP-120A5MN
DSP-90W5L(M)N
DSP-100W5L(M)N
DSP-120W5MN
DSP-90A6L(M)N
DSP-100A6L(M)N
DSP-120A6MN
DSP-90W6L(M)N
DSP-100W6L(M)N
DSP-120W6MN
Air-cooled
Water-cooled
MPa
0.70
0.93
0.70
0.93
0.70
0.93
0.70
0.93
0.70
0.93
0.70
m3/min
16.6
13.9
18.0
15.4
20.5
17.3
16.8
14.0
18.3
15.6
21.0
Nominal Output
kW
Motor Type
Discharge Temperature
2 (Flange)
L/min
90
120
100
90
0.93
17.6
120
100
2 (Flange)
180
160
35 or below
11/2
Starting Type
Star-Delta (3 contact)
Star-Delta (3 contact)
Driving Method
26 (Not filled)
16 (Not filled)
kW
1.1 2
1.5 2
L : 0.2 2, M : 0.05 3
0.05 3
Weight
kg
2,250
2,400
2,100
2,250
2,1501,5201,975
mm
dB(A)
68
70
69
71
2,1501,5201,825
72
73
66
68
67
69
69
70
NOTE:
1. Capacity is converted value at its inlet condition (atmospheric pressure).
2. Sound Level is value at 1.5m in front and 1m height in an anechoic room. It may
vary in different operating conditions and/or different environment with echo of
actual field installations.
Sound level might be increased by 2dB at PQ WIDEMODE ON.
3. P.D.P is measured at 30 degree C of intake air temperature and rated discharge
pressure.
P.D.P might be much worse at 0.4MPa or less of discharge pressure.
P.D.P might be 13 degree C at PQ WIDEMODE ON and 0.6MPa of discharge
pressure.
4. Capacity of Built-in Dryer model may decrease by up to 3% when drain
condensates.
5. Earth leakage circuit breaker is out of scope of supply from Hitachi.
6. DSP
compressors are not designed, intended or approved for breathing
air applications.
7. Pressures are indicated as the gauge pressure.
8. DSP
can not run in excess of 45C of ambient temperature. Ventilation
and/or air conditions should be considered to maintain the compressor room
temperature.
9. For the quality of the cooling water, contact your nearest dealer or Hitachi local
representative offices.
10. Install the DSP indoors and avoid flammable and corrosive environment, moisture
and dust.
11. Select 3.5-4.5 ton duty fork truck for transportation of DSP-90/100/120
.
12. Hitachi may make improvements and/or changes in the appearance and/or
specifications described in this publication at anytime without notice.
Model Nomenclature
(45/55/75 kW)
(90/100/120 kW)
75
55
160
120
35 or below
dB(A)
DCBL Motor
90
kW
100
75
45
Starting Type
Model
75
55
Dimensions (W DH)
45
Specifications
DSP-75WT[R]6N
Water-cooled
Air-cooled
0.70
Weight
Option
DSP-75WT[R]5N
DSP-55WT[R]6N
7.4 / 7.8
Large LCD display monitor is equipped as standard. Various functions can be easily set by control panel. In case of trouble, the information
of status of compressor is displayed so that it is possible to quickly carry out the Troubleshooting.
DSP-55WT[R]5N
DSP-45WT[R]6N
MPa
Refrigerant
Standard Function
DSP-45WT[R]5N
DSP-75AT[R]6N
m3/min
P.D.P
Digital Monitor
DSP-75AT[R]5N
DSP-55AT[R]6N
Menu Switch
DSP-55AT[R]5N
DSP-45AT[R]6N
Capacity (50/60Hz)
Monitor Switch
DSP-45AT[R]5N
Discharge Pressure
Model
Cooling Method
Improvement in Maintenance
Improvement of Reliability
1,320 [1,470]
71
2,1501,5201,825
2,200
1,410 [1,580]
65
66
67
D S P - 75 V A T R 5 N
D S P - 100 V A 5 M N
Oil Free
DSP
Oil Free
DSP
Screw
Screw
Package
Package
Nominal
Output (kW)
Two-stage
Nominal
Output (kW)
A:Air-cooled, W:Water-cooled
A:Air-cooled, W:Water-cooled
69
Debut of DSP
Enlarged Line-up of DSP
Starter Panel
Auto drain solenoid valves for condensate of both intercooler and aftercooler
minimize air consumption.
Aftercooler
(132240kW)
Front
Intercooler
Air End
(2nd Stage)
(Suction Throttle Valve)
Gear Case
AC/IC Auto
Drain
Solenoid Valve
Cooler
Drive System
Cooler
Compact Design
Air/Oil coolers are installed
in both sides of drive system.
TEFC Motor
Strainer
Aftercooler
Oil Cooler
Intercooler
Dual-V installation of
Coolers
Discharge Port
TEFC Motor
Energy-Saving (V-type)
Further Energy-Saving is achieved by DSP
Inverter.
Rear
with Built-in
100
75
New totally enclosed flange motor is applied to improve reliability. Motor shaft
in direct connection without coupling enables easy maintenance work.
50
25
DSP V Type
Control Pressure:0.65MPa
20
40
60
80
100
Model
Discharge Pressure
Capacity
160C180C
1st stage
air end
Intercooler
High precooler
Two stage
cooling
structure
Aftercooler
2nd stage
air end
DSP-132W5N
DSP-145W5N
DSP-160W5N
DSP-200W5N
DSP-240W5N
DSP-160VW5N
DSP-240VW5N
DSP-132W6N
DSP-145W6N
DSP-160W6N
DSP-200W6N
DSP-240W6N
DSP-160VW6N
DSP-240VW6N
Cooling Method
Water-cooled
MPa
0.75
m3/min
23.4
0.93
0.75
20.7
26.0
0.93
0.75
22.2
28.5
Discharge Pressure
V type (VSD)
0.93
0.75
24.8
37.0
Model
ItemUnit
0.93
0.75
32.2
40.5
0.93
0.75
35.0
28.5
0.93
0.75
24.8
40.5
DSP-132A5
DSP-145A5
DSP-160A5
DSP-200A5
DSP-240A5
DSP-132A6
DSP-145A6
DSP-160A6
DSP-200A6
DSP-240A6
Air-cooled
MPa
0.75
1.0
0.75
1.0
0.75
1.0
0.75
1.0
0.75
1.0
m3/min
22.5
19.0
25.0
20.0
27.5
22.5
35.5
30.0
40.0
32.5
0.93
Capacity
35.0
Nominal Output
kW
Motor Type
132
145
200
160
kW
Motor Type
Discharge Temperature
Discharge Temperature
Starting Type
Driving Method
kW
Weight
kg
Dimensions (WDH)
Nominal Output
Ventilating fan
Specifications
ItemUnit
Control Method
Maintenance Friendly
Specifications
Cooling Method
132
145
200
240
240
160
2 1/2 (Flange)
2 1/2 (Flange)
Star-Delta
3 (Flange)
Inverter
40 (Not filled)
40 (Not filled)
50 (Not filled)
0.4
4,800
3,800
68
69
69
70
4,000
2,8001,8001,950
2,5001,6001,925
mm
dB(A)
160
69
NOTE:
1. Capacity is converted value at its inlet condition (atmospheric pressure).
2. Sound Level is value at 1.5m in front and 1m height in an anechoic room. It may vary in different operating
conditions and/or different environment with echo of actual field installations.
3. Earth leakage circuit breaker is out of scope of supply from Hitachi.
4. DSP
compressors are not designed, intended or approved for breathing air applications.
5. Pressures are indicated as the gauge pressure.
70
69
70
70
2,5001,6001,925 2,8001,8001,950
71
70
70
71
Starting Type
Driving Method
50 (Not filled)
kW
4.4 (1.1 4)
Weight
kg
Dimensions (W D H)
5,100
71
6. DSP
can not run in excess of 40C of ambient temperature. Ventilation and/or air conditions
should be considered to maintain the compressor room temperature.
7. For the quality of the cooling water, contact your nearest dealer or Hitachi local representative offices.
8. Install the DSP indoors and avoid flammable and corrosive environment, moisture and dust.
9. Hitachi may make improvements and/or changes in the appearance and/or specifications described in this
publication at anytime without notice.
3 (Flange)
2 1/2 (Flange)
Star-Delta
Direct Connection with Motor + Gear Driving
60 (Not filled)
6.0 (1.5 4)
3,900
5,200
4,000
3,2001,8901,950
2,9001,7101,925
mm
dB(A)
240
73
74
74
NOTE:
1. Capacity is converted value at its inlet condition (atmospheric pressure).
2. Sound Level is value at 1.5m in front and 1m height in an anechoic room. It may vary in different operating
conditions and/or different environment with echo of actual field installations.
3. Earth leakage circuit breaker is out of scope of supply from Hitachi.
4. DSP series compressors are not designed, intended or approved for breathing air applications.
5. Pressures are indicated as the gauge pressure.
75
74
75
76
77
77
78
6. DSP series can not run in excess of 40C of ambient temperature. Ventilation and/or air conditions should
be considered to maintain the compressor room temperature.
7. Install the DSP indoors and avoid flammable and corrosive environment, moisture and dust.
8. Hitachi may make improvements and/or changes in the appearance and/or specifications described in this
publication at anytime without notice.
(1555kW)
Conventional Model
New Model
Conventional Model
Hitachi inverter controlling system brings about larger capacity under lower
pressure or smaller capacity under higher pressure. The available pressure range
is between 0.39 and 0.69MPa and air capacity has increased maximum 1928%
compared with conventional models.
New Model
Unit: m3/min
Unit: m3/min
80%
100%
9
10
Specifications
Specifications
Single-Stage
DSP-15A5
ItemUnit
DSP-37A5
DSP-22A5
DSP-15A6
DSP-37A6
DSP-22A6
DSP-55A5
DSP-15AR5
DSP-22AR5
DSP-37AR5
DSP-55AR5
ItemUnit
DSP-55A6
DSP-15AR6
DSP-22AR6
DSP-37AR6
DSP-55AR6
Cooling Method
MPa
0.69
0.39
0.69
0.39
0.69
0.39
0.69
0.39
m3/min
2.0
2.5
3.4
4.0
5.0
5.9
6.4
8.0
kW
Discharge Temperature
Starter Method
Driving Method
kW
22
15
37
Air Dryer
C
kW
Refrigerant
3.4
5.0
6.4
15
22
37
55
R1
Star-Delta (3 contact)
Star-Delta (3 contact)
V-Belt + Gear-Driven
0.75
0.9
0.75
0.9
0.2 / 0.3
12 (Not filled in)
0.5
1.1
R407C
25
W
800
750
1,020
62
63
1,240
780
63
66
64
68
68
830
25 2
120
1,170
1,390
70
62
2,180 9801,500
63
66
68
ItemUnit
Discharge Pressure
DSP-15W5
DSP-22W5
DSP-37W5
DSP-45W5
DSP-55W5
DSP-15W6
DSP-22W6
DSP-37W6
DSP-45W6
DSP-55W6
0.39
0.69
4.0
4.2
0.39
0.69
5.9
5.0
MPa
0.69
m3/min
2.0
kW
Atmospheric Pressure / 0 40
Discharge Temperature
L/min
Starter Method
Driving Method
kW
Weight
kg
Dimensions (WD H)
Sound Level (1.5m from front side)
0.39
0.69
2.5
3.4
15
22
0.69
6.8
6.4
45
37
Discharge Temperature
Starter Method
Driving Method
kW
50
Discharge Pressure
Cooling Method
Discharge Pressure
0.1
14 (Not filled in)
760
1,190
970
1,4009701,400
1,190
1,5209801,500
63
64
64
66
64
66
66
64
DSP-30AT5
DSP-37AT5
DSP-22ATR5
DSP-30ATR5
DSP-37ATR5
DSP-22AT6
DSP-30AT6
DSP-37AT6
DSP-22ATR6
DSP-30ATR6
DSP-37ATR6
0.88
0.69
0.88
0.69
0.88
0.69
0.88
0.69
0.88
4.6
3.9
5.3
4.6
3.6
3.1
4.6
3.9
5.3
4.6
kW
Discharge Temperature
R 1 1/2
Starter Method
Star-Delta (3 contact)
Driving Method
V-Belt + Gear-Driven
kW
0.75
18 (Not filled)
11
0.69
37
30
22
Atmospheric Pressure / 0 40
Atmospheric Pressure / 5 40
1.1
R407C
25 2
1,050
1,200
1,150
1,7809801,500
64
5.0
66
1,300
2,1809801,500
67
64
Water-Cooled
0.69
3.4
6.4
5.0
0.39
4.3
4.2
6.4
6.4
0.49
6.4
4.0
8.2
6.0
0.390.69
22
7.6
0.490.69
37
22
55
55
37
37
Atmospheric Pressure / 0 40
Atmospheric Pressure / 5 40
R1
R 1 1/2
55
Atmospheric Pressure / 0 40
R 1 1/2
R 1 1/2
Inverter
Inverter
0.9
12 (Not filled)
DSP-55VW
12 (Not filled)
18 (Not filled)
0.2
0.9
18 (Not filled)
14 (Not filled)
0.2 / 0.3
60
80
32 or below
R1
10 (Under Pressure)
1.1
25
W
kg
850
mm
1,6509701,400
dB(A)
63
R407C
1,080
880
1,180
1,7809801,500
66
120
68
1,330
1,230
1,050
2,1809801,500
1,6509701,400
63
68
66
1,150
1,7809801,500
64
66
67
DSP-37VAT5
DSP-37VATR5
DSP-37VAT6
DSP-37VATR6
Air-Cooled
MPa
0.69
0.88
0.69
0.88
m3/min
5.3
4.6
5.3
4.6
kW
Motor Type
Discharge Temperature
R 1 1/2
Starter Method
Inverter
Driving Method
kW
0.75
18 (Not filled)
Air Dryer
P.D.P.
kW
Refrigerant
10 (Under Pressure)
mm
dB(A)
37
30
W
kg
3.4
DSP-37VW
3.1
Refrigerant
DSP-55VAR6
ItemUnit
Star-Delta (3 contact)
0.88
DSP-37VAR6
Model
3.6
kW
DSP-22VAR6
Two-Stage
V-Belt + Gear-Driven
22
DSP-55VA6
80
0.69
MPa
Air Dryer
kW
Refrigerant
8.0
m3/min
P.D.P.
Dimensions (W D H)
0.39
Air-cooled
ItemUnit
P.D.P.
Weight
Two-Stage
Model
DSP-37VA6
R1
63
DSP-22VA6
L/min
C
32 or below
R3/4
62
55
80
60
DSP-55VAR5
R1 1/2
R1
50
mm
dB(A)
0.39
DSP-37VAR5
MPa
kW
Air Dryer
DSP-22VAR5
0.69
Motor Type
Water-cooled
Model
DSP-55VA5
Air-Cooled
1,400 9701,400
1,780 9801,500
1,4009701,400
mm
dB(A)
R1 1/2
DSP-37VA5
MPa
Atmospheric Pressure / 5 40
R1 1/2
R1
Full Voltage Start
Discharge Pressure
Rated
kg
Dimensions (WD H)
2.0
Atmospheric Pressure / 0 40
0.69
55
Model
Model
Single-Stage
Air-cooled
Discharge Pressure
(1555kW)
37
4-pole TEFC Motor
Atmospheric Pressure / 0 40
Atmospheric Pressure / 5 40
Ambient Temperature + 15 or below
10 (Under Pressure)
1.1
R407C
25 2
W
kg
1,200
1,350
mm
1,7809801,500
2,1809801,500
dB(A)
67
67
NOTE:
1. Capacity shows the flow rate converted in suction condition at rated discharge
pressure.
2. Noise Level is the value under the condition of full load running and auto-drain
valves closed in an anechoic room.
It may vary in different operating conditions and/or different environments with
echo of actual field installations.
Noise level might be increased by 3dB when PQ WIDEMODE is ON.
3. P.D.P. is measured at 30 degree C of intake air temperature and rated discharge
pressure.
P.D.P. might be worse at 0.4MPa or less of discharge pressure.
P.D.P. might be 13 degree C at PQ WIDEMODE ON and 0.6MPa of discharge
pressure.
4. Free Air Delivery of Built-in Dryer model may decrease by up to 3% when drain
condensates.
12
Options
Optional Specifications
HITACHI FOOD GRADE DSP OIL (Option)
HITACHI FOOD GRADE DSP OIL HITACHI Genuine Lubricant for Machine Used in Food Industry
COSMOS
Full Compliance with the International Hygiene Control Method for Food Safety HACCP1
To cope with the increasing demand for Food Safety , HITACHI newly developed HITACHI FOOD GRADE DSP OIL, HITACHI
genuine lubricant for HITACHI Oil-free Screw Compressor DSP used in food industry, fully complied with HACCP1
Features
The FOOD GRADE DSP OIL complies with the international hygiene control method for food safety HACCP1
The FOOD GRADE DSP OIL consists of only prescript substances by the U.S. FDA2
The FOOD GRADE DSP OIL is approved and registered as H1 grade4 by the U.S. NSF International3.
The FOOD GRADE DSP OIL has doubled long life compared with the conventional mineral oils5.
1 Hazard Analysis Critical Control Point
2 Food and Drug Administration
3 National Sanitation Foundation International
4 The oil which can be used in places where the oil can make occasional contact with foods.
The materials must be prescript substances regulated in the U.S. Food and Drug Law: FDA21 CFR178.3570.
5 Compared with the conventional mineral oil, longer life by adoption of chemosynthetic based lubricant.
(Exchange cycle: 8,000 operating hours or 1 year which comes earlier.)
Specifications
Unit
Item
Content
46
Color Phase
Density
@15C
kg/L
Viscosity
@40C
mm2/s
47
Flash Point
200
Pour Point
-50
Content
20
Exchange Cycle
Retrofit
Package
Weight
kg
About 18
Flushing running operation with the exclusive flushing use oil (new oil 20L can)
for 30 minutes twice then refill with new oil
Note:
1. Compliance Standard/Law: NSF H1 approval No. 138329 and FDA21 CFR178.3570
2. For retrofitting from conventional mineral oil to HITACHI FOOD GRADE DSP OIL, contact your nearest HITACHI authorized distributor/dealer.
Various Energy-Saving operations are possible based on different combinations of V-type model (VSD) and Fixed
Speed type model.
Easy Energy-Saving operation by
2 or 3 units
Other Options
V-type 75kW
13
DSP-75ATN2
DSP-75VATN+75ATN
(75kW 2 units)
100MWh
Energy-Saving
Effect
1,300
1,200
1,100
1,000
1,200
Calculation Condition:
1,100
8,000h/year operation
Control pressure
75ATN2: 0.7MPa
75VATN+75ATN:0.6MPa
DSP-75ATN
2
DSP-75VATN
DSP-75ATN
14
Options, Precautions
Compressed Air
Caution:
Failure to install an adequately sized receiver tank may cause
the DSP compressor to frequently load/unload. This may shorten
the mechanical life of the compressor.
HDR-22AX
HDR-37AX
HDR-55AX
HDR-75AX
HDR-100AX
15
2.5/2.9
22
4.0/4.3
37
6.8/7.4
55
10.8/11.3
75
15.0/15.7
100
19.0/20.0
3.0
3.75
50/60Hz
0.5
Rc 1
303x603x720
46
45
0.97
80
540
10 Under Pressure
1.1
2.2
Air Cooled
Capillary Tube
Hot Gas Bypass Valve
R407C
Ivory (Munsell No. 5Y8.5/1)
Rc 1 1/2
356x513x1,067 356x513x1,247 356x903x1,247
74
87
135
Auto Drain Trap / Drain Valve
Rc 2
Rc 2 1/2
356x903x1,489 406x1,400x1,385
170
280
0.7MPa
Hitachi Filter
HAF-7.5BX HAF-11BX HAF-15BX HAF-22B HAF-37B HAF-55B HAF-75B HAF-100B HAF-125B HAF-160B HAF-200B HAF-240B
1.2
1.8
2.4
3.9
6.6
10.6
13.8
20
27.6
32
40
50
30
0.69
Compressed Air
1.57
0.97
260
ItemUnit
1
99.999
0.005 or Lower
0.07
Rc1
92x237
1
130x290.5
2
2.1
Rc11/2
21/2 (Flange)
3 (Flange)
4 (Flange)
160 x509 170 x591 170 x699 173x792 173x949 590 x1,512
590 x1,512
640 x1,735
61
73
Rc2
3.7
3.3
4.3
27
204
86
311
95
440
130
DSP-55ATN
DSP-55VATN
246
(58,700)
DSP-75ATN
DSP-75VATN
333
(79,700)
200
25
MJ/h
(kcal/h)
m3/min
C
Pa (mmAq)
3
m /min
m3/min
77
(18,400)
Model
DSP-45ATN
57
198
(47,300)
150
20
25
530
650
890
230
180
DSP-37AT
DSP-37VAT
158
(37,800)
DSP-55A
DSP-55VA
225
(53,800)
120
28
20 (2)
600
150
DSP-22AT
DSP-30AT
118
(28,100)
145
(34,600)
100
22
310
380
130
410
DSP-90AN
DSP-100AN
DSP-120AN
DSP-100VAN
387
(92,500)
430
(102,800)
498
(118,900)
440
(105,000)
26
28
1,140
1,320
18
23
250
24
20 (2)
1,030
270
280
25
1,170
300
132240kW (Two-stage)
Model
MJ/h
Heat Generation
(kcal/h)
Air Exhaust (air compressor)
m3/min
Approx. Temp. Rise (exhaust air)
C
Maximum Pressure Loss (exhaust duct) Pa (mmAq)
Recommended Fan Capacity
m3/min
Recommended Fan Capacity
m3/min
DSP-132A
DSP-145A
DSP-160A
DSP-200A
DSP-240A
522
(125,000)
566
(135,000)
636
(152,000)
4402202
22
20 (2)
1,700
5202602
830
(198,000)
948
(226,000)
4002002
20
1,400
21
4802402
1,500
5002502
25
2,200
29
6003002
2,500
DSP-22A
DSP-22VA
117
(28,000)
65
MJ/h
Heat Generation
(kcal/h)
Air Exhaust (air compressor)
m3/min
Approx. Temp. Rise (exhaust air)
C
Maximum Pressure Loss (exhaust duct) Pa (mmAq)
Recommended Fan Capacity
m3/min
Recommended Fan Capacity
m3/min
ItemUnit
ItemUnit
500200900
5002001,200
19kg
32kg
37kg
Model
MJ/h
(kcal/h)
Air Exhaust (air compressor)
m3/min
Air Exhaust (air dryer)
m3/min
Approx. Temp. Rise (exhaust air)
C
Maximum Pressure Loss (exhaust duct) Pa (mmAq)
3
Recommended Fan Capacity
m /min
Recommended Fan Capacity
m3/min
Recommended Fan Capacity
m3/min
Heat Generation
15
18
DSP-15A
45120kW (Two-stage)
560
Rc3/4
Heat Generation
DSP-37A
DSP-37VA
166
(39,600)
100
25
Model
DSP-15AR
84
(20,100)
18
18
223
106
20
16
Precautions, Memo
MEMO
Model
DSP-15W
DSP-22W
MJ/h
(kcal/h)
m3/min
8
(1,900)
21
12
(2,800)
31
Model
DSP-90WN
MJ/h
(kcal/h)
m3/min
44
(10,400)
120
DSP-37W
DSP-37VW
15
(3,600)
40
18
(4,300)
50
DSP-55W
DSP-55VW
22
(5,300)
60
DSP-132WN
DSP-145WN
57
(13,400)
60
(14,400)
160
DSP-45W
DSP-45WTN
27
(6,400)
75
DSP-55WTN
DSP-55VWTN
28
(6,800)
80
DSP-75WTN
DSP-75VWTN
37
(8,800)
100
90240kW (Two-stage)
ItemUnit
Heat Generation
Recommended Fan Capacity
DSP-100WN
DSP-100VWN
49
(11,600)
130
DSP-120WN
56
(13,400)
150
Heat Generation
Recommended Fan Capacity
Model
DSP-45WTRN
MJ/h
(kcal/h)
m3/min
52
(12,300)
140
DSP-200WN
90
(21,500)
240
DSP-240WN
DSP-240VWN
98
(23,500)
260
DSP-160WN
DSP-160VWN
67
(16,000)
180
DSP-55WTRN
DSP-55VWTRN
53
(12,700)
145
DSP-75WTRN
DSP-75VWTRN
83
(19,800)
230
17
18