Professional Documents
Culture Documents
Opti V Belts
Opti V Belts
Opti V Belts
Technical Manual
optibelt
optibelt
t ALPHA
V-Belts
Kraftbands
Timing Belts
optibelt
t OMEGA HL
optibelt
t OMEGA HP
optibelt
t OMEGA
optibelt
optibelt
t ZR
Ribbed Belts
Ribbed Belt Pulleys
Timing Belts
Timing Belts
optibelt
V-Belts Kraftbands
y
Quarleitsult
is the
ign
of des
ntent.
i
y
b
fuelled
Technical Manual
for V-Belt Drives
This manual contains all the important technical information and methods required
for calculating drives using Optibelt V-belts and pulleys in industrial applications.
The following drive elements from Optibelts comprehensive range are described
in detail:
Our engineers from the Applications Engineering Dept. will be pleased to provide advice free
of charge on the use of these types of drives and to assist in designing to your specic requirements.
Especially for heavy duty, high performance drives we can produce optimum solutions using
our state of the art CAP drive design programme.
1
USA
Optibelt Corporation
1120 W. National Avenue
Addison, Illinois 60 101/USA
Tel. +1-630-628-84 00
Fax +1-630-628-61 75
optibelt@msn.com
Brazil
Optibelt do Brasil Ltda.
Rua Henrique Monteiro Nr. 90
10 Andar-Pinheiros
CEP 05423-020 So Paulo-SP/Brasil
optibeltdobrasil@optibelt.com
China
Optibelt Power Transmission (Shanghai) Co., Ltd.
# 55 Miaosan Road, Songjiang District
Shanghai 201612/P.R. China
Tel. +86-21- 5768 7465
Fax +86-21- 5768 7462
sales@optibelt.com.cn
Singapore
Optibelt Asia Pacic Pte. Ltd.
No. 4 Loyang Way 1, # 01- 02/03
Singapore 508708
Tel. +65-6545 4682
Fax +65-6545 4685
sales@optibelt.com.sg
Finland
Optibelt Finland Oy
PL 58
Lampputie 4
FIN-00751 Helsinki
Puh. +358-9-3 46 14 00
Faksi +358-9-3 46 15 00
optibelt@co.inet.
Scandinavia
Optibelt Skandinaviska AB
Stadiongatan 60
S-21762 Malm
Tel. +46-40-59 21 20
Fax +46-40-49 90 10
optibelt@optibelt.se
United Kingdom
Optibelt (UK) Ltd.
5 Bishops Court
Winwick Quay
GB-Warrington WA2 8QY
Cheshire
Tel. +44-870-4 28 88 00
Fax +44-1925-57 37 51
optibelt@optibeltuk.co.uk
Netherlands
Optibelt Nederland B.V.
Haarlemmerstraat 28
NL-2181 HC Hillegom
Tel. +31-252-52 82 83
Fax +31-252-53 47 35
info@optibelt.nl
Belgium
Optibelt GmbH
Filiaal Belgi
Draiboomstraat 6 bus 8
B-2160 Wommelgem
Tl. +32-3-3 25 22 75
Fax +32-3-3 26 09 55
optibelt@skynet.be
France
Optibelt France SAS
54, Rue de la Gare
B.P. N 13
F-68520 Burnhaupt-le-Haut
Tl. +33-3-89 62 75 10
Fax +33-3-89 62 75 19
optibelt-france@optibelt.fr
Transac S.A.
54, Rue de la Gare
F-68520 Burnhaupt-le-Haut
Tl. +33-3-89 62 75 20
Fax +33-3-89 62 75 29
Poland
Optibelt Polska Sp. z o.o.
ul. Budowlanych 11
PL-41-303 Dabrowa
Grnicza
Tel. +48-32-260 1175/76
Faks +48-32-260 42 08
biuro@optibelt.net.pl
Russian Federation
OOO Optibelt Power Transmission
Ul. Professionalnaja 151
141806 Dmitrow
Tel. +7 (495) 7 27 37 63, 7 27 37 64
Fax +7 (495) 7 27 37 65
info@optibelt.ru
Optibelt Produktions
GmbH & Co. KG
Carl-Vollrath-Strae 4
D-07422 Bad Blankenburg
Tel. +49 (0)3 6741-48 30
Fax +49 (0)3 6741-4 2101
Switzerland
Optibelt AG
Bodenackerstrasse 70
CH-4657 Dulliken
Tel. +41-62-285 50 00
Fax +41-62-285 50 01
vertrieb@optibelt.ch
Austria
Optibelt sterreich
GmbH
Carlbergergasse 38
A-1230 Wien
Tel. +43-1-8 65 43 97
Fax +43-1-8 65 43 96
ofce@optibelt.at
Ungarn
Optibelt Hungary Kft.
Szegedi utca 1 5
H-6792 Zsomb
Tel. +36-62-595-275
Fax +36-62-255-275
info@optibelt.hu
Italy
Optibelt AG
Via Dandolo, 1
I-20025 Legnano (Mi)
Tel. +39-0331-48 10 20
Fax +39-0331-48 10 75
optibeltitalia@libero.it
Table of Contents
Product description
Drive belts
Product description
Drive belts
Product description
Metal
Product description
Metal
Table of Contents
Drive calculations
Power ratings
Optibelt SK ................................................................................................83-87
Optibelt RED POWER II ................................................................................88-92
Optibelt Super X-POWER M=S, SUPER TX M=S .............................................93-100
Optibelt VB .............................................................................................101-111
Special drives
Design hints
Special purpose
conveyor belts
Annex
Standard Range
optibelt SK Wedge Belts to BS 3790
DIN 7753 Part 1
Construction
Optibelt SK wedge belts consist of
Applications
Filler rubber
Tension cord
Optibelt SK wedge belts with the sections SPZ, SPA, SPB and SPC
were specially developed for all industrial applications from lightly
loaded drives, such as those for pumps, to heavily loaded stone
crusher drives.
Rubber core
Standards/Dimensions
Fabric cover
The base and ller rubbers are extruded to precise prole dimensions and weight per unit length to give a better t in the pulley
grooves and vibration free running.
Polyester tension cord is standard, with yarn constructions matched
to section. The cord is specially impregnated and then encapsulated in a special rubber compound to give a perfect bond to the base
and ller rubber. In addition the cord is pre-stretched prior to
building into the belt to give lower stretch characteristics on
the drive. Due to the special pretreatment the Optibelt SK high
performance wedge belt has lower stretch characteristics. As a
result, we were able to reduce signicantly our rec-ommended
minimum allowances for drive centre adjustment, compared to
those specied in BS/DIN/ISO.
Table 1
Section
SPZ
SPA
SPB
SPC
bo
9.7
12.7
16.3
22
Datum width
bd
8.5
11
14
19
Greater exibility permits higher exing rates (fB max 100 s-1).
Belt height
10
13
18
Distance down to
datum line
hd
2, 8
3,5
4,8
Recommended minimum
pulley datum diameter
dd min
63
90
140
224
fB max
100
vmax
55*
Standard Range
optibelt SK Wedge Belts
to USA Standard RMA/MPTA
Construction/Properties
Table 2
Section
3V/9N
5V/15N 8V/25N
bo
15
25
Filler rubber
Belt height
13
23
Tension cord
Recommended minimum
pulley datum diameter
da min
63
140
335
0.074
0.195
0.575
Base rubber
Rubber impregnated
cover fabric
fB max
100
vmax
55*
Standardisation/Dimensions
The three wedge belt sections standardised in the USA are 3V/9N,
5V/15N and 8V/25N. The cross section dimensions of these belts
and the lengths by which they are identied are not in accordance
with BS 3790 or DIN 7753.
Example:
Inch designation
Metric designation
3V 750
9N 1905
= designation for
single V-belt
La
La
= 750 25.4
10
= 1905 mm
Applications
The use of Optibelt SK wedge belt drives in sections 3V/9N and
5V/15N is recommended for machines exported to countries such
as the USA and Canada where these belt sections are standardised
and used predominantly.
Section 8V/25N is primarily employed in very heavy duty drives
such as mills or stone crushers. As these wedge belts transmit very
high levels of power, they can sometimes form a more compact
drive than the SPC section.
da
Standard Range
optibelt RED POWER II High Performance Wedge Belts
Construction
Applications
Transverse bre
mixture made of
polychloroprene
Polyester tension
cord/service free
Transverse bre
mixture made of
polychloroprene
Standardisation/Dimensions
Optibelt RED POWER II wedge belts with the sections SPZ, SPA,
SPB, SPC, 3V/9N, 5V/25N are standardised according to BS
3790, DIN 7753 Part 1, ISO 4184 and RMA/MPTA.
Rubber core
Abrasion resistant
cover fabric
The tension cord for all sections and cross sections consists of a
special polyester cord. Due to the special treatment of the tension
cord the Optibelt RED POWER II wedge belt is very low stretch and
service free, so that retensioning is not necessary.
The bre mixture over and under the tension cord guarantees
highly dynamic load of the belt and provides good exibility in
combination with the polyester tension cord.
The cover fabric is extremely wear resistant, exible and abrasion
proof.
Properties
The high-quality components in connection with product manufacturing make the Optibelt RED POWER II a maintenance free V-belt.
Production is continuously monitored using state-of-the-art static and
dynamic testing devices.
Application with drives using idler pulleys is possible due to the
special construction of the Optibelt RED POWER II.
Its properties:
maintenance free
improved power rating
Section
For the initial tting of Optibelt RED POWER II the same calculation
methods are used as for standard Optibelt V-belts. The tensioning
values are to be calculated on the same basis or to be taken from
the table on page 130. Once correctly tensioned Optibelt RED
POWER II V-belts need no retensioning.
9 .7
12.7
16.3
22
8.5
11
14
19
bd
Belt height
10
13
18
Distance down to
datum line
hd
2.8
3 .5
4.8
63
90
140
224
0.074
0.123
0.195
0.377
dd min
Recommended minimum
pulley datum diameter
V-belt tensioning
SPC
Datum width
SetConstant
SPB
bo
Maximum flex
rate (per sec.)
Optibelt RED POWER II are oil resistant, heat resistant and dust
protected as standard
SPA
cost effective
environmentally friendly
SPZ
(s-1)
fB max
100
vmax
55*
Section
3V/9N
5V/15N 8V/25N
bo
15
25
Belt height
13
23
Recommended minimum
pulley datum diameter
da min
63
140
335
0.074
0.195
0.575
fB max
100
vmax
55*
Standard Range
optibelt VB Classical V-Belts
to BS 3790 and DIN 2215
Construction/Properties
Standardisation/Dimensions
Filler rubber
Tension cord
Base rubber
Rubber impregnated
cover fabric
DIN 2215
BS 3790 / ISO 4184
(5)
(8)
10
13
17
(20)
22
(25)
32
40
10
13
17
20
22
25
32
40
4.2
5.3
6.7
8.5
11
14
17
19
21
27
32
bo
Datum width
bd
Belt height
11
12.5
14
16
20
25
hd
1.3
1.6
2.0
2.5
3.3
4.2
4.8
5.7
6.3
8.1
12
Recommended minimum
pulley datum diameter
dd min
20
28
40
50
71
112
160
180
250
355
500
0.018 0.026 0.042 0.064 0.109 0.190 0.266 0.324 0.420 0.690 0.958
fB max
80
vmax
30
Standard Range
optibelt SUPER TX M=S raw edge, moulded cogged
BS/DIN/ISO, RMA/MPTA
Construction/Properties
Optibelt SUPER TX M=S belts consist of
Fabric
Tension cord
Bedding compound
Fibre reinforced base
compound
Moulded cog
Optibelt SUPER TX M=S V-belts are more heat and oil resistant than
wrapped V-belts as new, high quality rubber compounds are used.
Weight and space requirements are reduced by their ability to
transmit higher power even with small diameter pulleys often resulting in a
signicant reduction in cost.
Drive Calculation
Drive designs using Optibelt SUPER TX M=S belts should be undertaken following the example given on pages 79 to 81. The higher
power ratings given in the relevant tables, apply. These are based
on a theoretical laboratory running time of 25,000 hours.
Pulleys
Optibelt SUPER TX M=S V-belts are used with pulleys to BS 3790,
DIN 2211, DIN 2217, ISO 4183 and RMA/MPTA. Considerably
smaller minimum pulley datum diameters are acceptable.
Table 4
ZX/X10
40
Z/10
50
AX/X13
63
A/13
71
to the belt.
BX/X17
90
B/17
112
CX/X22
140
C/22
180
Section
Belt
top
width
bo
Datum
width
Belt
height
Distance
down to
datum line
Belt
weight
bd
hd
(kg/m)
2.5
0.062
ZX/X10
10
8.5
AX/X13
13
11
3.3
0.099
BX/X17
17
14
11
4.2
0.165
CX/X22
22
19
14
5.7
0.276
Standard Range
optibelt Super X-POWER M=S
raw edge, moulded cogged BS/DIN/ISO, RMA/MPTA
Advantages
Super X-POWER M=S wedge belts are ideally used in the following conditions
The special tension cord and the optimum cog shape enable higher dynamic and load transmission capabilities, improved bending
stress and a higher temperature resistance.
Because of the possibilities of greater power transmission, smaller pulley diameters and higher motor speeds it is often possible to
reduce drive space and weight and thus permit
signicant drive cost reductions
Construction/Characteristics
Optibelt Super X-POWER M=S consist of:
Applications
Machinery:
compressors
fans
road making equipment
pumps
wood working machines
2 Tension cord
low stretch
Polyester
3 CR/cushion compound
4 Beltbase/
CR-compound with
transverse bres
5 Moulded cogs
Standard Range
optibelt Super X-POWER M=S
45
Drive Calculation
40
XPB
Super X-POWER M=S
35
Standardisation/Dimensions
The cross sections and dimensions of Optibelt Super X-POWER
M=S V-belts correspond to BS 3790:1981, DIN 7753 Part 1,
DIN 2215, ISO 4184 and RMA/MPTA.
The basis for the length measurement is the datum length (Ld) to BS/
DIN/ISO.
30
25
XPB
SUPER TX M=S
20
Table 5
Section
15
10
1000
2000
3000
4000
5000
Speed n [min-1]
Belt
top
width
bo
Datum
width
Belt
height
bd
XPZ
9.7
XPA
12.7
11
XPB
16.3
14
XPC
22
9
15
3VX/9NX
5VX/15NX
8.5
Distance
Belt
down to weight
datum line
hd (kg/m)
2
0.065
10
2.8
0.105
13
3.5
0.183
19
18
4.8
0.340
0.065
13
0.183
Pulleys
Belt tension and static shaft loading are calculated as for wrapped
belts. The shaft loading is usually no greater than that for the same
drive using wrapped belts. It is often possible, due to a reduction
in the number of belts used, that the shaft loading could be lower.
The individual Super X-POWER M=S belt requires a higher tension
than the wrapped belt in order to utilise its greater power transmission capability.
Table 6
Test Results
XPZ
500
336.3
336.53
336.3
239.88
239.88
227.5
0.33
1
Life [h]
12
XPA
71
SPA
90
XPB
112
SPB
140
XPC
180
SPC
224
5VX/15NX
600
Spantension [N]
Optibelt Super X-POWER
M=S
SPZ
3VX/9NX
324
225
400
300
200
24
550
56
56
112
3V/9N
5V/15N
63
63
140
Standard Range
optibelt KB Kraftbands
Construction
The Optibelt KB Kraftbands are made up of individual V-belts rigidly connected by a joining band. This compact drive element with
single belt characteristics is also known as a joined V-belt. According to application kraftbands are tted with two, three, four or ve
ribs. It is also possible to provide the joining band with special
patterns.
Raw edge, moulded cogged Optibelt KBX Kraftbands with the belt
sections 3VX/9JX, 5VX/15JX, XPZ, XPA, AX/HAX, BX/HBX are
available upon request in lengths from 1250 to 3550 mm.
Optibelt KB
PKR 0
Optibelt KBX
PKR 3
Applications
Optibelt KB Kraftbands are predominantly employed for solving
problems associated with:
pulsating loads
large centre distances in combination with small pulley diameters (long span lengths)
vertical shafts
reversing drives
V-at drives
clutching drives
conveyor systems (materials handling technology))
Standard Range
optibelt KB Kraftbands
Kraftband sets must be used for drives with more than 5 ribs. The
following combinations should be used.
Important:
Table 7
No. of ribs
Kraftband combination
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
2
3
4
5
3/3
3/4
4/4
5/4
5/5
4/3/4
4/4/4
4/5/4
5/4/5
5/5/5
4/4/4/4
4/4/5/4
5/4/4/5
5/4/5/5
5/5/5/5
4/4/5/4/4
5/4/4/4/5
5/4/5/4/5
5/5/4/5/5
5/5/5/5/5
5/4/4/4/4/5
5/5/4/4/4/5
5/5/4/4/5/5
5/5/5/4/5/5
5/5/5/5/5/5
5/4/4/5/4/4/5
5/5/4/4/4/5/5
5/5/5/4/4/5/5
5/5/5/4/5/5/5
5/5/5/5/5/5/5
5/5/4/4/4/4/5/5
5/5/5/4/4/4/5/5
5/5/5/4/4/5/5/5
5/5/5/5/4/5/5/5
5/5/5/5/5/5/5/5
Optibelt KB Kraftband
Optibelt KB Kraftbands are employed for extreme shock loads,
large centre distances in combination with comparatively small
pulley diameters and vertical drives. They are used for coupling
drives and for conveying works. With the same power transmission,
the kraftband offers better running properties and/or safety.
Optibelt Kraftbands with sections SPZ, SPA and SPC can be applied
in standard V-grooved pulleys according to BS 3790, DIN 2211
and ISO 4183.
Drive Calculation
Drives using Optibelt KB Kraftbands in mechanical engineering are
to be tted as shown in the calculation examples on pages 78 to
80 of this manual using the power ratings of the relevant belt sections. In ISO 5290, the nominal top width of the pulley groove is
specied as the base value. The position of the datum diameter is
given as an approximate value. For the geometric and power
calculation, the outside diameter is used. Small computational
differences in rotational frequency and speed ratio have no practical effect.
For kraftbands with classical V-belts, as a rule, the calculation uses
the datum diameter as well. The power ratings correspond to the
sections of the classical V-belts.
For conversion factors for Optibelt KB Kraftbands, see page 144.
Drives on agricultural machinery employ special design
calculations and methods. We, therefore, request that
you send us your technical details.
14
Ordering Example
The drive of a mill is equipped with Optibelt KB Kraftbands, size
5V 1600/15J 4064 mm La. It was calculated with 18 ribs. In total,
4 kraftbands are required 2 belts each with 4 ribs and 2 belts
each with 5 ribs (see Table 7).
The order wording would then read:
1 set comprising 2 Optibelt KB Kraftbands 4-5V 1600/15J
4064 mm La and 2 Optibelt KB Kraftbands 5-5V 1600/15J
4064 mm La.
4 or 5
5V/15J
1600
4064
=
=
=
=
number of ribs
section
outside length in inches: 10
outside length in mm
Standard Range
optibelt SUPER VX and SUPER DVX Variable Speed Belts
Raw Edge Moulded Cogged DIN 7719/ISO 1604
Sections
Belt widths of up to100 mm
Belt thicknesses of 525 mm
Dimensions
The features of the SUPER DVX variable speed belt can be summarised as follows:
Sections
Lengths up to 5000 mm
Standardised dimensions to BS/DIN/ISO and USA Standard
RMA/MPTA
Applications
industrial machinery
variable speed drives
printing machinery
gearboxes
agricultural machinery
textile machinery
machine tools
automotive technology
special drives
compactors
multi-colour offset drives
variable diameter pulley sets
thresher drum drives
winding machinery
lathes
snowmobile drives
Belt widths of
2085 mm
Belt thicknesses of 1030 mm
Dimensions
Lengths ranging from 600 to 3500 mm
Sections and dimensions comparable to BS/DIN/ISO
Standard Range
optibelt DK Double Section V-Belts
Construction
A cross section of the Optibelt DK double section V-belt reveals a
hexagon made up of two congruent trapeziums. The neutral axis
containing the tension cord is exactly half way up the belt section.
Optibelt DK double section V-belts comprise:
Base rubber
Tension cord
Base rubber
Rubber impregnated
cover fabric
Properties/Applications
The polyester tension cord positioned at the centre of the section
imparts extreme exibility and low stretch properties to the Optibelt
DK double section V-belt. The belt is therefore particularly suited
for exing in different directions in the same plane. Optibelt DK
double section V-belts are used where several pulleys are arranged
in one plane and the direction of rotation of one or more of the
driven pulleys must be changed without crossing the belts. Because
of the positioning of the tension cord in the neutral axis and the
special shape of the double section V-belt, the tension cord is not
subjected to any force other than tension unlike standard V-belts
bent around an outside idler. The Optibelt DK double section V-belt
comes into its own on typical serpentine arrangements. Special
constructions are also possible. In the main, double section V-belts
are used on agricultural machinery. They are, however, also nding
increasing use in industrial machinery applications.
There are also equivalent sections HAA, HBB, HCC and HDD, in
accordance with the USA Standard ASAE S 211. ..., thereby
ensuring an international interchange facility.
The effective/nominal length of the Optibelt DK double section
V-belt is measured on the effective/outside diameter of the measuring pulley. This length equates roughly to length of the belt at its
widest part, the middle length.
Conversion factors are as follows:
Section AA/HAA effective length = middle length 4 mm
Section BB/HBB effective length = middle length 8 mm
Section CC/HCC effective length = middle length + 3 mm
Section DD/HDD effective length = middle length!
Experience has shown that, in practical use/ordering, these conversion factors can be ignored.
Grooved Pulleys
No special pulleys are required for Optibelt DK double section
V-belts. Pulleys conforming to ISO 4183, BS 3790, DIN 2211,
DIN 2217 and ASAE S 211. ... are suitable.
Section AA/HAA in grooved pulleys for A/13-SPA
Section BB/HBB in grooved pulleys for B/17-SPB
Section CC/HCC in grooved pulleys for C/22-SPC
Section DD/HDD in grooved pulleys for D/32
Special Sections
For special applications, we also supply double section V-belts
widths 22 x 22 and 25 x 22. These are not standardised.
Drive Calculation
Drive calculations for Optibelt DK double section V-belts differ from
those given in this manual for two pulley drives. Multi pulley calculations are so complicated that they cannot be shown here.
Effective lengths, rotational speeds, transmission ratios and belt
speeds are determined by the effective/outside pulley diameters.
Our engineers will be pleased to assist in the design of drives using
Optibelt DK double section V-belts.
Standardisation
The cross dimensions of the Optibelt DK double section V-belts
correspond to DIN 7722 and ISO 5289.
Table 8
DIN/ISO section
Section
Abbreviated
designation
HAA
HBB
HCC
HDD
AA
BB
CC
DD
22 x 22 25 x 22
Belt width
13
17
22
32
22
25
Belt hight
10
13
17
25
22
22
80
125
224
355
280
280
0.250
0.440
0.935
0.511
0.625
Recommended minimum
pulley datum diameter
Belt weight (kg/m)
Max. belt speed (m/s)
16
da min
0.150
vmax
30
Standard Properties
Oil Resistant
Oil resistance prevents damaging through
mineral oils and mineral fats, insofar as
those substances are not continuously and
in great quantities in contact with the Vbelts. Animal and vegetable fats as well as water-soluble cooling
and cutting oils result in a reduction of the service life. For higher
concentrations, we recommend the use of our Super X-POWER
special constructions 05 and SUPER TX V-belts respectively.
Heat Resistant
Standard V-belts allow ambient temperatures of up to approximately + 70 C. Higher temperatures lead to a premature ageing and hardening of the V-belts. Therefore,
we recommend in such cases the use of our special construction
RED POWER II, Super X-POWER or SUPER TX.
For details see page 18.
S=C PLUS
Dust Protection
Dust reduces the service life of V-belts enormously. Wear resistant fabric covers make
Optibelt V-belts resistant to dust. This is demonstrated by its continual application in
cement factories, mills, in the stone processing industries, and in
the mining industry.
17
Special Constructions
Anti-Static
Optibelt V-belts do have anti-static properties. In the case of V-belts
with inadequate anti-static properties, the electrostatic charge can
be so high that there is a risk of ignition due to sparking. The use
of anti-static belts requires a check of the required properties in
accordance with ISO 1813. We present proof of the anti-static
properties of the belts in the form of our nal inspection certicate
according to EN 10204 3.1.B.
We charge an extra fee for this additional service. We strongly
recommend that anti-static belts be ordered separately.
Extra Heat Resistant V-Belts,
Special Construction XHR
The service life of standard Optibelt V-belts can be greatly reduced
due to the effects of temperature.
In case of ambient temperatures that vary constantly between
approx. + 70 C up to approx. + 90 C, we recommend that RED
POWER II, Super X-POWER or SUPER TX belts be used. Special
rubber compounds largely prevent premature ageing and brittleness. In borderline cases, trials are recommended, as individual
drive parameters such as belt speed and pulley diameter also have
an inuence on the belt life.
The diagram below illustrates the high degree to which the ambient
temperature inuences the service life of V-belts. It shows the improvements in service life heat resistant belts offer within the hightemperature range in comparison to the standard design. However,
you cannot expect the same service life as under normal conditions.
Service life
heat resistant
belts
standard construction
18
Standard Range
optibelt SK Wedge Belts
to BS 3790/DIN 7753 Part 1/ISO 4184
SPZ
SPA
SPB
SPC
Section SPZ
Section SPA
Section SPB
Section SPC
Datum length
ISO (mm) Ld
487
512
562
587
612
1037
1047
1060
1077
1087
1637
1662
1687
1700
1737
732
757
782
800
807
1382
1400
1407
1432
1457
2120
2132
2182
2207
2232
3350
3382
3550
3750
4000
1250
1320
1400
1450
1500
2000
2120
2240
2360
2500
630
637
662
670
687
1112
1120
1137
1162
1180
1762
1787
1800
1812
1837
832
850
857
882
900
1482
1500
1507
1532
1557
2240
2282
2300
2307
2332
3750
3800
4000
4050
4250
4250
4500
1600
1700
1750
1800
1850
2650
2800
3000
3150
3350
710
722
737
750
762
1187
1202
1212
1237
1250
1862
1887
1900
1937
1987
907
932
950
957
982
1582
1600
1607
1632
1657
2360
2382
2432
2482
2500
4300
4500
4560
4750
4820
1900
2000
2020
2060
2120
3550
3750
4000
4250
4500
772
787
800
812
825
1262
1287
1312
1320
1337
2000
2037
2120
2137
2150
1000
1007
1032
1060
1082
1682
1700
1707
1732
1757
2532
2582
2607
2632
2650
5000
5070
5300
5600
6000
2150
2180
2240
2280
2360
4750
5000
5300
5600
6000
837
850
862
875
887
1347
1362
1387
1400
1412
2187
2240
2287
2360
2500
1107
1120
1132
1157
1180
1782
1800
1807
1832
1857
2682
2732
2782
2800
2832
6300
6700
7100
7500
8000
2400
2500
2650
2680
2800
900
912
925
937
950
1437
1462
1487
1500
1512
2540
2650
2690
2800
2840
1207
1232
1250
1257
1272
1882
1900
1907
1932
1957
2847
2882
2932
2982
3000
6300
6700
7100
7500
8000
2840
2850
2900
3000
3150
962
987
1000
1012
1024
1537
1562
1587
1600
1612
3000
3150
3350
3550
1282
1307
1320
1332
1357
1982
2000
2032
2057
2082
3032
3082
3150
3182
3282
8500
9000
9500
10000
10600
3250
3350
3450
3550
3650
11200
12500
Datum length Ld
19
Standard Range
optibelt SK Wedge Belts
to USA Standard RMA/MPTA
3V/9N
5V/15N
8V/25N
Section 3V/9N
Section 5V/15N
Section 8V/25N
Designation
20
Designation
(outside length mm)
La
Designation
Designation
(outside length mm)
La
Designation
Designation
(outside length mm)
La
3V
3V
3V
3V
3V
250
265
280
300
315
9N
9N
9N
9N
9N
635
673
711
762
800
5V
5V
5V
5V
5V
530
560
600
630
670
15N 1346
15N 1422
15N 1524
15N 1600
15N 1702
8V 1000
8V 1120
8V 1180
8V 1250
8V 1320
25N
25N
25N
25N
25N
2540
2845
2997
3175
3353
3V
3V
3V
3V
3V
335
355
375
400
425
9N 851
9N 902
9N 952
9N 1016
9N 1079
5V
5V
5V
5V
5V
710
750
800
850
900
15N 1803
15N 1905
15N 2032
15N 2159
15N 2286
8V 1400
8V 1500
8V 1600
8V 1700
8V 1800
25N
25N
25N
25N
25N
3556
3810
4064
4318
4572
3V
3V
3V
3V
3V
450
475
500
530
560
9N 1143
9N 1206
9N 1270
9N 1346
9N 1422
5V 950
5V 1000
5V 1060
5V 1120
5V 1180
15N 2413
15N 2540
15N 2692
15N 2845
15N 2997
8V 1900
8V 2000
8V 2120
8V 2240
8V 2360
25N
25N
25N
25N
25N
4826
5080
5385
5690
5994
3V
3V
3V
3V
3V
600
630
670
710
750
9N 1524
9N 1600
9N 1702
9N 1803
9N 1905
5V 1250
5V 1320
5V 1400
5V 1500
5V 1600
15N 3175
15N 3353
15N 3556
15N 3810
15N 4064
8V 2500
8V 2650
8V 2800
8V 3000
8V 3150
25N
25N
25N
25N
25N
6350
6731
7112
7620
8001
3V 800
3V 850
3V 900
3V 950
3V 1000
9N 2032
9N 2159
9N 2286
9N 2413
9N 2540
5V 1700
5V 1800
5V 1900
5V 2000
5V 2120
15N 4318
15N 4572
15N 4826
15N 5080
15N 5385
8V 3350
8V 3550
8V 3750
8V 4000
8V 4250
25N 8509
25N 9017
25N 9525
25N 10160
25N 10795
3V 1060
3V 1120
3V 1180
3V 1250
3V 1320
9N 2692
9N 2845
9N 2997
9N 3175
9N 3353
5V 2240
5V 2360
5V 2500
5V 2650
5V 2800
15N 5690
15N 5994
15N 6350
15N 6731
15N 7112
8V 4500
8V 4750
8V 5000
25N 11430
25N 12065
25N 12700
3V 1400
9N 3556
5V 3000
5V 3150
5V 3350
5V 3550
15N 7620
15N 8001
15N 8509
15N 9017
Standard Range
optibelt RED POWER II High Performance Wedge Belts
USA Standard RMA/MPTA
3V/9N
5V/15N
8V/25N
Section 3V/9N
Section 5V/15N
Section 8V/25N
Designation
Designation
(outside length mm)
La
Designation
Designation
(outside length mm)
La
Designation
Designation
(outside length mm)
La
3V
3V
3V
3V
3V
475
500
530
560
600
9N 1206
9N 1270
9N 1346
9N 1422
9N 1524
5V
5V
5V
5V
5V
530
560
600
630
670
15N 1346
15N 1422
15N 1524
15N 1600
15N 1702
8V 1000
8V 1120
8V 1180
8V 1250
8V 1320
25N
25N
25N
25N
25N
2540
2845
2997
3175
3353
3V
3V
3V
3V
3V
630
670
710
750
800
9N 1600
9N 1702
9N 1803
9N 1905
9N 2032
5V
5V
5V
5V
5V
710
750
800
850
900
15N 1803
15N 1905
15N 2032
15N 2159
15N 2286
8V 1400
8V 1500
8V 1600
8V 1700
8V 1800
25N
25N
25N
25N
25N
3556
3810
4064
4318
4572
3V 850
3V 900
3V 950
3V 1000
3V 1060
9N 2159
9N 2286
9N 2413
9N 2540
9N 2692
5V 950
5V 1000
5V 1060
5V 1120
5V 1180
15N 2413
15N 2540
15N 2692
15N 2845
15N 2997
8V 1900
8V 2000
8V 2120
8V 2240
8V 2360
25N
25N
25N
25N
25N
4826
5080
5385
5690
5994
3V 1120
3V 1180
3V 1250
3V 1320
3V 1400
9N 2845
9N 2997
9N 3175
9N 3353
9N 3556
5V 1250
5V 1320
5V 1400
5V 1500
5V 1600
15N 3175
15N 3353
15N 3556
15N 3810
15N 4064
8V 2500
8V 2650
8V 2800
8V 3000
8V 3150
25N
25N
25N
25N
25N
6350
6731
7112
7620
8001
5V 1700
5V 1800
5V 1900
5V 2000
5V 2120
15N 4318
15N 4572
15N 4826
15N 5080
15N 5385
8V 3350
8V 3550
8V 3750
8V 4000
8V 4250
25N 8509
25N 9017
25N 9525
25N 10160
25N 10795
5V 2240
5V 2360
5V 2500
5V 2650
5V 2800
15N 5690
15N 5994
15N 6350
15N 6731
15N 7112
8V 4500
8V 4750
25N 11430
25N 12065
5V 3000
5V 3150
15N 7620
15N 8001
21
Standard Range
optibelt RED POWER II High Performance Wedge Belts
BS 3790/DIN 7753 Part 1/ISO 4184
SPZ
SPA
SPB
SPC
Section SPZ
Section SPA
Section SPB
Datum length
ISO (mm)
Ld
Section SPC
Datum length
ISO (mm)
Ld
1202
1212
1237
1250
1262
1587
1600
1612
1637
1662
2137
2187
2240
2287
2360
1207
1232
1250
1257
1282
1700
1707
1732
1757
1782
2282
2300
2307
2332
2360
3082
3150
3182
3282
3350
1250
1320
1400
1500
1600
2000
2120
2240
2360
2500
1287
1312
1320
1337
1362
1687
1700
1737
1762
1787
2500
2650
2800
3000
3150
1307
1320
1332
1357
1382
1800
1807
1832
1857
1882
2382
2432
2482
2500
2532
3382
3550
3750
4000
1700
1800
1900
2000
2120
2650
2800
3000
3150
3350
1387
1400
1412
1437
1462
1800
1837
1862
1887
1900
3350
3550
1400
1407
1432
1457
1482
1900
1907
1932
1957
1982
2582
2607
2632
2650
2682
2240
2360
2500
2650
2800
3550
3750
4000
4250
4500
1487
1500
1512
1537
1562
1937
1987
2000
2037
2120
1500
1507
1532
1557
1582
2000
2032
2057
2082
2120
2732
2782
2800
2832
2847
3000
3150
3350
3550
3750
4750
5000
5300
5600
6000
1600
1607
1632
1657
1682
2132
2182
2207
2232
2240
2882
2932
2982
3000
3032
4000
4250
4500
4750
5000
6300
6700
7100
7500
8000
5300
5600
6000
6300
6700
8500
9000
9500
10000
7100
7500
8000
Maximum
production length:
8 000 mm Ld
Datum length Ld
22
Maximum
production length:
10 000 mm Ld
Standard Range
optibelt VB Classical V-Belts
to BS3790/DIN 2215/ISO 4184
Section 5*
Y/6
Section Y/6*
Section 8
Inside
length
Li (mm)
Datum length
ISO
Ld (mm)
Inside
length
Li (mm)
200
239
270
290
310
190
229
260
280
300
295
315
350
415
440
280
300
335
400
425
335
375
420
445
470
315
355
400
425
450
Z 11
Z 121/2
Z 14
Z 15
Z 16
312
337
397
422
447
325
332
345
385
435
315
322
335
375
425
465
515
555
615
865
450
500
540
600
850
495
510
550
580
595
475
490
530
560
575
Z 17
Z 18
Z 19
Z 193/4
Z 20
485
510
540
564
610
475
500
530
554
600
620
650
690
720
730
600
630
670
700
710
770
795
820
845
870
750
775
800
825
850
Other sizes
on request
Weight:
0.018 kg/m
Weight:
0.026 kg/m
Datum length Ld
Datum length
ISO
Ld (mm)
Inside
length
Li (mm)
Section Z/10
Datum length
ISO
Ld (mm)
Other sizes
on request
Z/10
Belt
no.
Datum length
ISO
Ld (mm)
Belt
no.
Datum length
ISO
Ld (mm)
Inside
length
Li (mm)
Belt
no.
Datum length
ISO
Ld (mm)
Inside
length
Li (mm)
290
315
375
400
425
Z 381/2
Z 39
Z 40
Z 401/2
Z 41
997
1022
1038
1052
1063
975
1000
1016
1030
1041
Z 68
Z 69
Z 70
Z 71
Z 73
1747
1772
1797
1822
1872
1725
1750
1775
1800
1850
472
497
502
522
537
450
475
480
500
515
Z 411/2
Z 42
Z 43
Z 431/4
Z 44
1072
1082
1102
1122
1142
1050
1060
1080
1100
1120
Z 75
Z 78
Z 79
Z 831/2
Z 88
1922
1997
2022
2142
2262
1900
1975
2000
2120
2240
Z 201/2
Z 21
Z 211/4
Z 22
Z 23
547
552
562
582
597
525
530
540
560
575
Z 45
Z 46
Z 461/2
Z 47
Z 48
1172
1187
1202
1216
1237
1150
1165
1180
1194
1215
Z 93
Z 98
2382
2522
2360
2500
Z 24
Z 25
Z 26
Z 27
Z 271/2
622
652
672
692
722
600
630
650
670
700
Z 481/2
Z 49
Z 50
Z 51
Z 52
1247
1272
1292
1317
1342
1225
1250
1270
1295
1320
895
920
970
1020
1040
875
900
950
1000
1020
Z 28
Z 281/2
Z 29
Z 291/2
Z 30
732
747
752
772
787
710
725
730
750
765
Z 53
Z 54
Z 55
Z 56
Z 57
1368
1393
1422
1444
1472
1346
1371
1400
1422
1450
1070
1095
1140
1220
1270
1050
1075
1120
1200
1250
Z 31
Z 311/2
Z 32
Z 33
Z 331/2
797
822
842
847
872
775
800
820
825
850
Z 58
Z 59
Z 60
Z 61
Z 62
1497
1522
1546
1572
1597
1475
1500
1524
1550
1575
Z 34
Z 35
Z 36
Z 37
Z 38
887
897
922
947
972
865
875
900
925
950
Z 63
Z 64
Z 65
Z 66
Z 67
1622
1648
1673
1697
1722
1600
1626
1651
1675
1700
Weight:
0.042 kg/m
Inside
length
Li (mm)
23
Standard Range
optibelt VB Classical V-Belts
to BS 3790/DIN 2215/ ISO 4184
A/13
Section A/13
Belt no.
Belt no.
Belt no.
Belt no.
A 16
A 18
A 19
A 20
A 21
437
487
510
538
565
407
457
480
508
535
A 41
A 411/2
A 42
A 421/2
A 43
1071
1080
1090
1105
1130
1041
1050
1060
1075
1100
A
A
A
A
A
69
70
71
72
73
1780
1805
1830
1855
1884
1750
1775
1800
1825
1854
A 105
A 107
A 108
A 110
A 112
2697
2755
2773
2830
2875
2667
2725
2743
2800
2845
A 22
A 23
A 231/2
A 24
A 25
590
605
630
640
660
560
575
600
610
630
A 431/2
A 44
A 45
A 451/2
A 46
1135
1150
1173
1180
1198
1105
1120
1143
1150
1168
A
A
A
A
A
74
75
76
77
78
1910
1930
1960
1986
2010
1880
1900
1930
1956
1980
A 114
A 116
A 118
A 120
A 124
2926
2976
3030
3078
3180
2896
2946
3000
3048
3150
A 26
A 261/2
A 27
A 271/2
A 28
680
700
716
730
740
650
670
686
700
710
A 461/2
A 47
A 471/2
A 48
A 481/2
1210
1230
1245
1250
1255
1180
1200
1215
1220
1225
A
A
A
A
A
79
80
81
82
83
2030
2062
2090
2113
2130
2000
2032
2060
2083
2100
A 128
A 132
A 136
A 140
A 144
3280
3380
3484
3580
3688
3250
3350
3454
3550
3658
A 29
A 291/2
A 30
A 31
A 311/2
760
780
797
805
830
730
750
767
775
800
A 49
A 50
A 51
A 52
A 53
1280
1300
1330
1350
1380
1250
1270
1300
1320
1350
A
A
A
A
A
831/2
84
841/2
85
86
2150
2164
2180
2190
2230
2120
2134
2150
2160
2200
A 148
A 158
A 167
A 187
A 197
3780
4030
4280
4780
5030
3750
4000
4250
4750
5000
A 32
A 321/2
A 33
A 34
A 341/2
843
855
871
880
905
813
825
841
850
875
A 54
A 55
A 56
A 57
A 58
1405
1430
1452
1480
1505
1375
1400
1422
1450
1475
A
A
A
A
A
87
88
89
90
91
2240
2270
2291
2316
2341
2210
2240
2261
2286
2311
A 35
A 351/2
A 36
A 37
A 371/2
919
930
944
955
980
889
900
914
925
950
A 59
A 60
A 61
A 62
A 63
1530
1555
1580
1605
1630
1500
1525
1550
1575
1600
A
A
A
A
A
92
93
94
95
96
2367
2390
2418
2443
2468
2337
2360
2388
2413
2438
A 38
A 381/2
A 39
A 40
A 401/2
995
1005
1030
1046
1060
965
975
1000
1016
1030
A 64
A 65
A 66
A 67
A 68
1655
1680
1706
1730
1755
1625
1650
1676
1700
1725
A 97
A 98
A 100
A 102
A 104
2494
2530
2570
2621
2680
2464
2500
2540
2591
2650
24
Standard Range
optibelt VB Classical V-Belts
to BS 3790/DIN 2215/ ISO 4184
B/17
Section B/17
Belt no.
B 23
B 24
B 25
B 26
B 261/2
B 27
B 28
B 29
B 30
B 31
B 32
B 321/2
B 33
B 34
B 341/2
B 35
B 36
B 37
B 371/2
B 38
B 381/2
B 39
B 40
B 401/2
B 41
B 411/2
B 42
B 421/2
B 43
B 431/4
B 44
B 45
B 451/2
B 46
B 461/2
B 47
B 48
B 481/2
B 49
B 50
610
655
670
690
710
726
750
765
790
815
840
865
876
890
915
929
940
965
990
1005
1015
1040
1056
1070
1080
1090
1100
1115
1130
1140
1160
1190
1203
1215
1220
1240
1255
1265
1290
1315
Belt no.
B 51
B 52
B 521/2
B 53
B 531/2
B 54
B 55
B 56
B 57
B 58
B 59
B 60
B 61
B 62
B 63
B 64
B 65
B 66
B 67
B 68
B 69
B 691/2
B 70
B 71
B 72
B 73
B 74
B 75
B 76
B 77
B 78
B 79
B 80
B 81
B 82
B 83
B 831/2
B 84
B 85
B 86
570
615
630
650
670
686
710
725
750
775
800
825
836
850
875
889
900
925
950
965
975
1000
1016
1030
1040
1050
1060
1075
1090
1100
1120
1150
1163
1175
1180
1200
1215
1225
1250
1275
1340
1360
1375
1390
1400
1412
1440
1462
1490
1513
1540
1565
1590
1615
1640
1665
1690
1716
1740
1765
1790
1801
1815
1840
1869
1890
1920
1940
1970
1990
2021
2040
2072
2100
2123
2140
2160
2174
2200
2240
1300
1320
1335
1350
1360
1372
1400
1422
1450
1473
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
1761
1775
1800
1829
1850
1880
1900
1930
1950
1981
2000
2032
2060
2083
2100
2120
2134
2160
2200
Belt no.
B 87
B 88
B 89
B 90
B 91
B 92
B 93
B 94
B 941/2
B 95
B 96
B 961/2
B 97
B 98
B 99
B 100
B 101
B 102
B 103
B 104
B 105
B 106
B 107
B 108
B 110
B 112
B 114
B 115
B 116
B 118
B 120
B 122
B 124
B 126
B 128
B 130
B 132
B 134
B 136
B 138
2250
2280
2301
2326
2340
2377
2400
2428
2440
2453
2478
2490
2505
2540
2555
2580
2605
2640
2656
2690
2707
2740
2758
2790
2840
2885
2940
2961
2990
3040
3088
3139
3190
3240
3290
3342
3390
3444
3490
3545
2210
2240
2261
2286
2300
2337
2360
2388
2400
2413
2438
2450
2465
2500
2515
2540
2565
2600
2616
2650
2667
2700
2718
2750
2800
2845
2900
2921
2950
3000
3048
3099
3150
3200
3250
3302
3350
3404
3450
3505
Belt no.
B 140
B 142
B 144
B 146
B 148
B 150
B 151
B 152
B 154
B 155
B 156
B 158
B 160
B 162
B 165
B 167
B 173
B 175
B 177
B 180
B 187
B 195
B 197
B 208
B 210
B 220
B 236
B 240
B 248
B 264
B 276
B 280
3590
3640
3698
3740
3790
3850
3890
3901
3952
3990
4002
4040
4104
4155
4240
4290
4434
4490
4540
4612
4790
4993
5040
5340
5374
5640
6040
6136
6340
6740
7040
7140
3550
3600
3658
3700
3750
3810
3850
3861
3912
3950
3962
4000
4064
4115
4200
4250
4394
4450
4500
4572
4750
4953
5000
5300
5334
5600
6000
6096
6300
6700
7000
7100
25
Standard Range
optibelt VB Classical V-Belts
to BS 3790/DIN 2215/ ISO 4184
20
C/22
25
Section 20
Section C/22
Section 25
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
Belt
no.
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
Belt
no.
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
950
1050
1170
1230
1300
1370
1450
1550
1650
1750
1850
1950
2050
2170
2290
2410
2550
2700
2850
3050
3200
3400
3600
3800
4050
4550
5050
6050
900
1000
1120
1180
1250
1320
1400
1500
1600
1700
1800
1900
2000
2120
2240
2360
2500
2650
2800
3000
3150
3350
3550
3750
4000
4500
5000
6000
C 43
C 47
C 48
C 49
C 51
C 52
C 53
C 54
C 55
C 56
C 57
C 58
C 59
C 60
C 61
C 62
C 63
C 65
C 66
C 67
C 68
C 69
C 70
C 71
C 72
C 73
C 74
C 75
C 76
C 77
C 78
C 79
C 80
C 81
C 82
C 83
C 831/2
C 84
C 85
C 86
C 87
C 88
C 89
C 90
C 92
C 93
C 94
C 95
C 96
C 961/2
C 97
C 98
C 99
C 100
C 101
1148
1258
1273
1308
1353
1378
1408
1433
1458
1483
1508
1533
1558
1582
1608
1632
1658
1708
1734
1758
1785
1808
1836
1858
1887
1912
1938
1958
1988
2014
2039
2058
2090
2118
2141
2166
2178
2192
2217
2242
2268
2298
2319
2344
2395
2418
2446
2471
2496
2508
2522
2558
2583
2598
2618
1090
1200
1215
1250
1295
1320
1350
1375
1450
1425
1450
1475
1500
1524
1550
1574
1600
1650
1676
1700
1727
1750
1778
1800
1829
1854
1880
1900
1930
1956
1981
2000
2032
2060
2083
2108
2120
2134
2159
2184
2210
2240
2261
2286
2337
2360
2388
2413
2438
2450
2464
2500
2525
2540
2560
C 102
C 104
C 105
C 106
C 108
C 110
C 112
C 114
C 115
C 116
C 117
C 118
C 120
C 122
C 124
C 126
C 128
C 130
C 132
C 134
C 136
C 138
C 140
C 142
C 144
C 146
C 148
C 150
C 158
C 162
C 166
C 167
C 168
C 170
C 173
C 175
C 177
C 180
C 187
C 190
C 195
C 197
C 208
C 210
C 220
C 225
C 236
C 240
C 248
C 264
C 270
C 280
C 295
C 300
C 315
2649
2700
2725
2750
2808
2858
2903
2954
2979
3008
3023
3058
3106
3157
3208
3258
3308
3360
3408
3462
3508
3563
3608
3665
3716
3758
3808
3868
4058
4158
4274
4308
4325
4376
4452
4503
4558
4630
4808
4884
5011
5058
5358
5392
5658
5773
6058
6154
6358
6758
6916
7158
7558
7678
8058
2591
2642
2667
2692
2750
2800
2845
2896
2921
2950
2965
3000
3048
3099
3150
3200
3250
3302
3350
3404
3450
3505
3550
3607
3658
3700
3750
3810
4000
4100
4216
4250
4267
4318
4394
4445
4500
4572
4750
4826
4953
5000
5300
5334
5600
5715
6000
6096
6300
6700
6858
7100
7500
7620
8000
1460
1560
1660
1760
1860
1960
2060
2180
2300
2420
2560
2710
2760
2860
3060
3210
3410
3610
3810
4060
4310
4560
4810
5060
5360
5660
6060
6360
6760
7160
7560
8060
8560
9060
1400
1500
1600
1700
1800
1900
2000
2120
2240
2360
2500
2650
2700
2800
3000
3150
3350
3550
3750
4000
4250
4500
4750
5000
5300
5600
6000
6300
6700
7100
7500
8000
8500
9000
Datum length Ld
26
Standard Range
optibelt VB Classical V-Belts
to BS 3790/DIN 2215/ISO 4184
D/32
E/40
Section D/32
Section E/40
Belt no.
Inside length
Li
Belt no.
Inside length
Li
D 79
D 98
D 104
D 110
D 118
D 120
D 124
D 128
D 132
D 135
D 136
D 140
D 144
D 148
D 154
D 158
D 162
D 167
D 173
D 177
D 180
D 187
D 195
D 197
D 208
D 210
D 220
D 225
D 236
D 240
D 248
D 264
D 270
D 280
D 295
D 300
D 315
D 330
D 335
D 354
D 374
D 394
D 441
2075
2575
2725
2875
3075
3123
3225
3326
3425
3500
3529
3625
3733
3825
4000
4075
4190
4325
4469
4575
4647
4825
5028
5075
5375
5409
5675
5790
6075
6171
6375
6775
6933
7175
7575
7695
8075
8457
8575
9075
9575
10075
11275
2000
2500
2650
2800
3000
3048
3150
3251
3350
3425
3454
3550
3658
3750
3925
4000
4115
4250
4394
4500
4572
4750
4953
5000
5300
5334
5600
5715
6000
6096
6300
6700
6858
7100
7500
7620
8000
8382
8500
9000
9500
10000
11200
E 118
E 158
E 197
E 220
E 236
E 248
E 280
E 295
E 315
E 354
E 394
E 441
E 492
3080
4080
5080
5680
6080
6380
7180
7580
8080
9080
10080
11280
12580
3000
4000
5000
5600
6000
6300
7100
7500
8000
9000
10000
11200
12500
27
Standard Range
optibelt Super X-POWER M=S Wedge Belts
Raw Edge, Moulded Cogged
BS 3790/DIN 7753 Part 1 /ISO 4184 und RMA/MPTA
XPZ
XPA
XPB
XPC
Section XPZ
3VX/9NX
Section 3VX/9NX
Designation
Designation
La
(outside length mm)
5VX/15NX
Section 5VX/15NX
Designation
Designation
La
(outside length mm)
587
612
630
637
662
1187
1202
1212
1237
1250
2690
2800
2840
3000
3150
732
757
782
800
807
1500
1507
1532
1557
1582
1250
1320
1400
1500
1600
2000
2120
2240
2360
2500
3VX
3VX
3VX
3VX
3VX
250
265
280
300
315
9NX
9NX
9NX
9NX
9NX
635
673
711
762
800
5VX
5VX
5VX
5VX
5VX
500
530
560
600
630
15NX 1270
15NX 1346
15NX 1422
15NX 1524
15NX 1600
670
687
710
730
737
1262
1287
1312
1320
1337
3350
3550
832
850
857
882
900
1600
1607
1632
1700
1757
1700
1800
1900
2000
2120
2650
2800
3000
3150
3350
3VX
3VX
3VX
3VX
3VX
335
355
375
400
425
9NX 851
9NX 902
9NX 952
9NX 1016
9NX 1079
5VX
5VX
5VX
5VX
5VX
670
710
750
800
850
15NX 1702
15NX 1803
15NX 1905
15NX 2032
15NX 2159
750
762
772
787
800
1362
1387
1400
1412
1437
907
932
950
957
982
1800
1882
1900
2000
2120
2240
2360
2500
2650
2800
3550
3VX
3VX
3VX
3VX
3VX
450
475
500
530
560
9NX 1143
9NX 1206
9NX 1270
9NX 1346
9NX 1422
5VX 900
5VX 950
5VX 1000
5VX 1060
5VX 1120
15NX 2286
15NX 2413
15NX 2540
15NX 2692
15NX 2845
812
825
837
850
862
1462
1487
1500
1512
1537
1000
1007
1030
1060
1082
2240
2360
2500
2650
2800
3000
3150
3350
3550
3VX
3VX
3VX
3VX
3VX
600
630
670
710
750
9NX 1524
9NX 1600
9NX 1702
9NX 1803
9NX 1905
5VX 1180
5VX 1250
5VX 1320
5VX 1400
15NX 2997
15NX 3175
15NX 3353
15NX 3556
875
887
900
912
925
1562
1587
1600
1612
1662
1107
1120
1132
1157
1180
3000
3150
3350
3550
3VX 800
3VX 850
3VX 900
3VX 950
3VX 1000
9NX 2032
9NX 2159
9NX 2286
9NX 2413
9NX 2540
937
950
962
987
1000
1700
1750
1762
1800
1850
1207
1232
1250
1257
1272
3VX 1060
3VX 1120
3VX 1180
3VX 1250
3VX 1320
9NX 2692
9NX 2845
9NX 2997
9NX 3175
9NX 3353
1012
1037
1060
1077
1087
1900
1950
2000
2120
2150
1282
1307
1320
1332
1357
3VX 1400
9NX 3556
1112
1120
1137
1162
1180
2240
2360
2500
2540
2650
1382
1400
1432
1457
1482
Weight:
0.065 kg/m
Datum length Ld
28
Weight:
0.096 kg/m
pitch length Lw/Lp
Weight:
0.183 kg/m
Weight:
0.340 kg/m
Weight:
0.065 kg/m
Weight:
0.183 kg/m
Standard Range
optibelt SUPER TX M=S V-Belts
Raw Edge, Moulded Cogged to BS 3790/DIN 2215/ISO 4184
ZX/X10
Section ZX/X10
Datum length
ISO
Ld (mm)
Belt no.
ZX 23
ZX 24
ZX 25
ZX 26
ZX 27
ZX 28
ZX 29
ZX 291/2
ZX 311/2
ZX 32
ZX 33
ZX 331/2
ZX 35
ZX 36
ZX 37
ZX 38
ZX 40
ZX 42
ZX 461/2
ZX 52
ZX 55
ZX 59
597
622
652
672
692
732
752
772
822
842
847
872
897
922
947
972
1038*
1082*
1202*
1342*
1422*
1522*
AX/X13
BX/X17
Section AX/X13
Belt no.
AX 23
AX 231/2
AX 24
AX 25
AX 261/2
AX 27
AX 28
AX 29
AX 30
AX 31
AX 32
AX 33
AX 34
AX 35
AX 351/2
AX 36
AX 37
AX 371/2
AX 38
AX 39
AX 40
AX 411/2
AX 42
AX 43
AX 44
AX 451/2
AX 46
AX 47
AX 48
AX 49
AX 50
AX 51
AX 52
AX 53
AX 54
AX 55
AX 56
AX 57
AX 58
AX 59
AX 62
AX 63
AX 67
AX 70
AX 71
AX 75
AX 79
AX 88
AX 93
AX 98
AX 104
AX 110
AX 118
AX 124
AX 132
Datum length
ISO
Ld (mm)
605
630
640
660
700
716
740
760
797
805
843
871
880
919
930
944
955
980
995
1030
1046
1080
1090
1130
1150
1180
1198
1230
1250
1280
1300
1330
1350
1380
1405
1430
1452
1480
1505
1530
1605
1630
1730
1805
1830
1930
2030
2270
2390
2530
2680*
2830*
3030*
3180*
3380*
CX/X22
Section BX/X17
Belt no.
BX 23
BX 25
BX 26
BX 28
BX 29
BX 30
BX 31
BX 32
BX 33
BX 34
BX 341/2
BX 35
BX 36
BX 37
BX 38
BX 39
BX 40
BX 41
BX 42
BX 43
BX 44
BX 45
BX 451/2
BX 46
BX 461/2
BX 47
BX 48
BX 49
BX 50
BX 51
BX 52
BX 53
BX 54
BX 55
BX 57
BX 58
BX 59
BX 61
BX 62
BX 63
BX 67
BX 69
BX 71
BX 73
BX 75
BX 79
BX 88
BX 93
BX 98
BX 103
BX 104
BX 110
BX 118
BX 124
BX 132
Weight: 0.165 kg/m
Datum length
ISO
Ld (mm)
610
670
690
750
765
790
815
840
876
890
915
929
940
965
1005
1040
1056
1080
1100
1130
1160
1190
1203
1215
1220
1240
1255
1290
1315
1340
1360
1390
1412
1440
1490
1513
1540
1590
1615
1640
1740
1790
1840
1890
1940
2040
2280
2400
2540
2656*
2690*
2840*
3040*
3190*
3390*
Section CX/X22
Belt no.
Datum length
ISO
Ld (mm)
CX 39
CX 43
CX 49
CX 52
CX 55
CX 59
CX 62
CX 67
CX 68
CX 71
CX 75
CX 79
CX 81
CX 85
CX 88
CX 90
CX 93
CX 96
CX 98
CX 110
CX 118
CX 124
CX 132
1058*
1148*
1308*
1378*
1458*
1558*
1632*
1758*
1785*
1858*
1958*
2058*
2118*
2217*
2298*
2344*
2418*
2496*
2558*
2858*
3058*
3208*
3408*
29
Standard Range
optibelt KB Kraftbands with Wedge Belts
to BS/DIN/ISO
Section
Section SPZ
SPZ
SPA
SPB
SPC
bo (mm)
9.7
12.7
16.5
22.0
h (mm)
10.5
12.5
15.6
22.6
Section SPA
Section SPB
Section SPC
Datum length
ISO
Ld (mm)
Datum length
ISO
Ld (mm)
Datum length
ISO
Ld (mm)
Datum length
ISO
Ld (mm)
1250
1400
1500
1600
1700
1250
1400
1500
1600
1700
2000
2120
2240
2360
2500
3000
3150
3350
3550
3750
1800
1900
2000
2120
2240
1800
1900
2000
2120
2240
2650
2800
3000
3150
3350
4000
4250
4500
4750
5000
2360
2500
2650
2800
3000
2360
2500
2650
2800
3000
3550
3750
4000
4250
4500
5300
5600
6000
6300
6700
3150
3350
3550
3150
3350
3550
3750
4000
4750
5000
5300
5600
6000
7100
7500
8000
8500
9000
4250
4500
6300
6700
7100
7500
8000
9500
10000
10600
11200
11800
12500
30
Datum length Ld
Standard Range
optibelt KB Kraftbands with Wedge Belts
to USA Standard RMA/MPTA
Section
Section 3V/9J
Designation
Designation
(outside length mm)
La
Section 5V/15J
Designation
3V/9J
5V/15J 8V/25J
bo (mm)
9.0
15.0
25.0
h (mm)
9.9
15.1
25.5
Section 8V/25J
Designation
(outside length mm)
La
Designation
Designation
(outside length mm)
La
3V
3V
3V
3V
3V
500
530
560
600
630
9J 1270
9J 1346
9J 1422
9J 1524
9J 1600
5V
5V
5V
5V
5V
560
600
630
670
710
15J 1422
15J 1524
15J 1600
15J 1702
15J 1803
8V 1000
8V 1060
8V 1120
8V 1180
8V 1250
25J
25J
25J
25J
25J
2540
2692
2845
2997
3175
3V
3V
3V
3V
3V
670
710
750
800
850
9J 1702
9J 1803
9J 1905
9J 2032
9J 2159
5V
5V
5V
5V
5V
750
800
850
900
950
15J 1905
15J 2032
15J 2159
15J 2286
15J 2413
8V 1320
8V 1400
8V 1500
8V 1600
8V 1700
25J
25J
25J
25J
25J
3353
3556
3810
4064
4318
3V 900
3V 950
3V 1000
3V 1060
3V 1120
9J 2286
9J 2413
9J 2540
9J 2692
9J 2845
5V 1000
5V 1060
5V 1120
5V 1180
5V 1250
15J 2540
15J 2692
15J 2845
15J 2997
15J 3175
8V 1800
8V 1900
8V 2000
8V 2120
8V 2240
25J
25J
25J
25J
25J
4572
4826
5080
5385
5690
3V 1180
3V 1250
3V 1320
3V 1400
9J 2997
9J 3175
9J 3353
9J 3556
5V 1320
5V 1400
5V 1500
5V 1600
5V 1700
15J 3353
15J 3556
15J 3810
15J 4064
15J 4318
8V 2360
8V 2500
8V 2650
8V 2800
8V 3000
25J
25J
25J
25J
25J
5994
6350
6731
7112
7620
5V 1800
5V 1900
5V 2000
5V 2120
5V 2240
15J 4572
15J 4826
15J 5080
15J 5385
15J 5690
8V 3150
8V 3350
8V 3550
8V 3750
8V 4000
25J 8001
25J 8509
25J 9017
25J 9525
25J 10160
5V 2360
5V 2500
5V 2650
5V 2800
5V 3000
15J 5994
15J 6350
15J 6731
15J 7112
15J 7620
8V 4250
8V 4500
8V 4750
25J 10795
25J 11430
25J 12065
5V 3150
5V 3350
5V 3550
15J 8001
15J 8509
15J 9017
31
Standard Range
optibelt KBX Kraftbands Raw Edge, Moulded Cogged
to USA Standard RMA/MPTA
Section
Section 3VX/9JX
5VX/15JX
bo (mm)
9.0
15.0
h (mm)
9.9
15.1
Section 5VX/15JX
Designation La
(outside length mm)
Designation
3VX/9JX
Designation
Designation La
(outside length mm)
3VX
3VX
3VX
3VX
3VX
500
530
560
600
630
9JX 1270
9JX 1346
9JX 1422
9JX 1524
9JX 1600
5VX
5VX
5VX
5VX
5VX
500
530
560
600
630
15JX 1270
15JX 1346
15JX 1422
15JX 1524
15JX 1600
3VX
3VX
3VX
3VX
3VX
670
710
750
800
850
9JX 1702
9JX 1803
9JX 1905
9JX 2032
9JX 2159
5VX
5VX
5VX
5VX
5VX
670
710
750
800
850
15JX 1702
15JX 1803
15JX 1905
15JX 2032
15JX 2159
3VX 900
3VX 950
3VX 1000
3VX 1060
3VX 1120
9JX 2286
9JX 2413
9JX 2540
9JX 2692
9JX 2845
5VX 900
5VX 950
5VX 1000
5VX 1060
5VX 1120
15JX 2286
15JX 2413
15JX 2540
15JX 2692
15JX 2845
3VX 1180
3VX 1250
3VX 1320
3VX 1400
9JX 2997
9JX 3175
9JX 3353
9JX 3556
5VX 1180
5VX 1250
5VX 1320
5VX 1400
15JX 2997
15JX 3175
15JX 3353
15JX 3556
Kraftbands with the sections XPZ, XPA, XPB, AX/HAX and BX/HBX can be supplied on request.
Weight: 0.117 kg/m per rib
Other sizes on request
32
Standard Range
optibelt KB Kraftbands with Classical V-Belts
to BS 3790/DIN/ISO, ASAE
Section
Section A/HA
(Section A)
Inside length
Belt
no.
Li (mm)
(Section HA)
Outside
length
La (mm)
B/HB
C/HC
D/HD
bo (mm)
13.0
17.0
22.0
32.0
h (mm)
9.9
13.0
16.2
22.4
Section B/HB
(Section B)
Inside length
Belt
no.
Li (mm)
(Section HB)
Outside
length
La (mm)
47
51
56
57
59
1200
1300
1422
1450
1500
1236
1336
1458
1486
1536
47
51
55
59
61
1200
1300
1400
1500
1550
1262
1362
1462
1562
1612
64
67
71
75
79
1625
1700
1800
1900
2000
1661
1736
1836
1936
2036
63
64
67
71
73
1600
1625
1700
1800
1850
1662
1687
1762
1862
1912
88
98
100
104
112
2240
2500
2540
2650
2845
2276
2536
2576
2686
2881
75
79
83
88
91
1900
2000
2100
2240
2300
120
128
144
158
167
3048
3250
3658
4000
4250
3084
3286
3694
4036
4286
941/2
98
102
106
112
187
4750
4786
A/HA
Section C/HC
(Section B)
Inside length
Belt
no.
Li (mm)
(Section HB)
Outside
length
La (mm)
158
167
177
4000
4250
4500
4062
4312
4562
187
197
208
220
4750
5000
5300
5600
4812
5062
5362
5662
(Section C)
Inside length
Belt
no.
Li (mm)
(Section HC)
Outside
length
La (mm)
Section D/HD
(Section D)
Inside length
Belt
no.
Li (mm)
(Section HD)
Outside
length
La (mm)
90
98
108
120
128
2286
2500
2750
3048
3250
2361
2575
2825
3123
3325
98
110
120
128
144
2500
2800
3048
3250
3658
2611
2911
3159
3361
3769
140
146
151
167
177
3550
3700
3850
4250
4500
3625
3775
3925
4325
4575
158
162
173
180
195
4000
4115
4394
4572
4953
4111
4226
4505
4683
5064
1962
2062
2162
2302
2362
187
197
208
220
236
4750
5000
5300
5600
6000
4825
5075
5375
5675
6075
210
225
240
255
270
5334
5715
6096
6477
6858
5445
5826
6207
6588
6969
2400
2500
2600
2700
2845
2462
2562
2662
2762
2907
248
6300
6375
285
300
315
330
345
7239
7620
8000
8382
8763
7350
7731
8111
8493
8874
118
120
128
132
140
3000
3048
3250
3350
3550
3062
3110
3312
3412
3612
360
390
420
450
480
9144
9906
10668
11430
12200
9255
10017
10779
11541
12311
146
148
3700
3750
3762
3812
540
600
660
700
13716
15240
16764
17780
13827
15351
16875
17891
33
Standard Range
optibelt RED POWER II Kraftbands
with High Performance Wedge Belts BS/DIN/ISO
34
Section
SPB
SPC
bo (mm)
16.5
22.0
h (mm)
15.6
22.6
Section SPB
Section SPC
Datum length
ISO
Ld (mm)
Datum length
ISO
Ld (mm)
2000
2120
2240
2360
2500
3000
3150
3350
3550
3750
2650
2800
3000
3150
3350
4000
4250
4500
4750
5000
3550
3750
4000
4250
4500
5300
5600
6000
6300
6700
4750
5000
5300
5600
6000
7100
7500
8000
8500
9000
6300
6700
7100
7500
8000
9500
10000
Weight:
0.261 kg/m per rib
Weight:
0.555 kg/m per rib
Datum length Ld
Standard Range
optibelt RED POWER II Kraftbands
with High Performance Wedge Belts USA Standard RMA/MPTA
Section
Section 3V/9J
Designation
Designation
(outside length mm)
La
Section 5V/15J
Designation
3V/9J
5V/15J 8V/25J
bo (mm)
9.0
15.0
25.0
h (mm)
9.9
15.1
25.5
Section 8V/25J
Designation
(outside length mm)
La
Designation
Designation
(outside length mm)
La
3V
3V
3V
3V
3V
500
530
560
600
630
9J 1270
9J 1346
9J 1422
9J 1524
9J 1600
5V
5V
5V
5V
5V
560
600
630
670
710
15J 1422
15J 1524
15J 1600
15J 1702
15J 1803
8V 1000
8V 1060
8V 1120
8V 1180
8V 1250
25J
25J
25J
25J
25J
2540
2692
2845
2997
3175
3V
3V
3V
3V
3V
670
710
750
800
850
9J 1702
9J 1803
9J 1905
9J 2032
9J 2159
5V
5V
5V
5V
5V
750
800
850
900
950
15J 1905
15J 2032
15J 2159
15J 2286
15J 2413
8V 1320
8V 1400
8V 1500
8V 1600
8V 1700
25J
25J
25J
25J
25J
3353
3556
3810
4064
4318
3V 900
3V 950
3V 1000
3V 1060
3V 1120
9J 2286
9J 2413
9J 2540
9J 2692
9J 2845
5V 1000
5V 1060
5V 1120
5V 1180
5V 1250
15J 2540
15J 2692
15J 2845
15J 2997
15J 3175
8V 1800
8V 1900
8V 2000
8V 2120
8V 2240
25J
25J
25J
25J
25J
4572
4826
5080
5385
5690
3V 1180
3V 1250
3V 1320
3V 1400
9J 2997
9J 3175
9J 3353
9J 3556
5V 1320
5V 1400
5V 1500
5V 1600
5V 1700
15J 3353
15J 3556
15J 3810
15J 4064
15J 4318
8V 2360
8V 2500
8V 2650
8V 2800
8V 3000
25J
25J
25J
25J
25J
5994
6350
6731
7112
7620
5V 1800
5V 1900
5V 2000
5V 2120
5V 2240
15J 4572
15J 4826
15J 5080
15J 5385
15J 5690
8V 3150
8V 3350
8V 3550
8V 3750
8V 4000
25J 8001
25J 8509
25J 9017
25J 9525
25J 10160
5V 2360
5V 2500
5V 2650
5V 2800
5V 3000
15J 5994
15J 6350
15J 6731
15J 7112
15J 7620
8V 4250
8V 4500
8V 4750
25J 10795
25J 11430
25J 12065
5V 3150
15J 8001
Weight:
0.122 kg/m per rib
Weight:
0.252 kg/m per rib
Weight:
0.693 kg/m per rib
35
Standard Range
optibelt SUPER VX Variable Speed Belts Raw Edge,
Moulded Cogged DIN 7719/ISO 1604
Section/
ISO
Inside length
designation
(Datum length) Ld
Li (mm)
13 x 5
468
500
17 x 5
426
476
536
570
606
776
W
W
W
W
W
W
21 x 6
530
600
610
675
770
870
970
1220
W 20 560
W 20 630
W 20 640
W 20 710
W 20 800
W 20 900
W 20 1000
W 20 1250
22 x 8
485
525
565
650
700
750
800
850
900
950
1000
1060
1185
16
16
16
16
16
16
450
500
560
600
630
800
Section/
ISO
Inside length
designation
(Datum length) Ld
Li (mm)
26 x 8
655
672
710
750
762
800
862
962
1082
28 x 8
600
650
700
750
800
850
900
950
1000
1060
1120
1180
1250
1320
1400
1450
1500
30 x 10
650
665
700
800
850
875
900
950
1000
1035
1050
1120
1200
1320
1340
1500
1600
W 25 690
W 25 710
W 25 750
W 25 790
W 25 800
W 25 840
W 25 900
W 25 1000
W 25 1120
Section/
ISO
Inside length
designation
(Datum length) Ld
Li (mm)
Section/
ISO
Inside length
designation
(Datum length) Ld
Li (mm)
Section/
ISO
Inside length
designation
(Datum length) Ld
Li (mm)
32 x 10
750
790
820
850
900
950
1000
1073
1120
1180
1200
1353
47 x 13
1000
1060
1120
1180
1250
1320
1400
1500
1600
1700
1800
70 x 18
1600
1700
1800
1900
2000
2240
2500
W 31,5 800
W 31,5 840
W 31,5 870
W 31,5 900
W 31,5 950
W 31,5 1000
W 31,5 1050
W 31,5 1120
W 31,5 1170
W 31,5 1230
W 31,5 1250
W 31,5 1400
37 x 10
660
800
850
900
950
1000
1020
1060
1120
1180
1250
1320
1400
1500
1600
1700
1800
41 x 13
925
1000
1040
1060
1120
1180
1190
1250
1340
1440
1600
1740
1940
W
W
W
W
W
W
W
W
W
W
50
50
50
50
50
50
50
50
50
50
1250
1320
1400
1480
1600
1680
1800
2000
2240
2320
55 x 16
1400
1500
1600
1700
1800
W 40 990
W 40 1060
W 40 1100
W 40 1120
W 40 1180
W 40 1240
W 40 1250
W 40 1310
W 40 1400
W 40 1500
W 40 1660
W 40 1800
W 40 2000
36
52 x 16
1180
1250
1325
1400
1525
1600
1725
1925
2165
2240
65 x 20
1706
1906
W 63 1800
W 63 2000
Tolerances
Length 1 % of the nominal belt length
Angle
1.5 of the nominal angle
Height 8 mm
= 0.8 mm
> 8 to 20 mm = 1.0 mm
> 20 mm
= 1.5 mm
Width 0.75 mm
Other sizes and double cogged variable speed belts can be supplied on request.
Standard Range
optibelt SUPER VX Variable Speed Belts Raw Edge,
Moulded Cogged According to USA Standard RMA/MPTA
RMA/MPTA designation
RMA/MPTA designation
RMA/MPTA designation
1922 V 751
1922 V 756
2530 V 934
2530 V 990
1926
1926
1926
1926
1926
2830
2830
2830
2830
2830
1422
1422
1422
1422
1422
V
V
V
V
V
235
240
270
290
300
1422
1422
1422
1422
1422
V
V
V
V
V
330
340
360
400
420
1422
1422
1422
1422
1422
V
V
V
V
V
440
460
470
480
540
2230
2230
2230
2230
2230
V
V
V
V
V
266
273
275
326
375
1422 V 600
1422 V 660
2322
2322
2322
2322
2322
V
V
V
V
V
329
347
364
396
421
2322
2322
2322
2322
2322
V
V
V
V
V
434
441
461
481
486
2322
2322
2322
2322
2322
V
V
V
V
V
521
541
601
661
681
1430 V 215
1922
1922
1922
1922
1922
V
V
V
V
V
277
282
298
321
332
1922
1922
1922
1922
1922
V
V
V
V
V
338
363
381
386
403
1922
1922
1922
1922
1922
V
V
V
V
V
426
443
454
460
484
1922
1922
1922
1922
1922
V
V
V
V
V
526
544
604
630
646
1922
1922
1922
1922
1922
V
V
V
V
V
666
686
706
721
726
V
V
V
V
V
250
275
290
407
415
1926 V 427
2322 V 701
2322 V 801
2426 V 353
2426 V 363
2530
2530
2530
2530
2530
V
V
V
V
V
500
530
560
600
630
2530
2530
2530
2530
2530
V
V
V
V
V
670
710
750
790
800
V
V
V
V
V
337
363
366
367
393
2830 V 396
2830 V 422
2926
2926
2926
2926
2926
2926
V
V
V
V
V
V
471
486
521
546
574
586
2926
2926
2926
2926
2926
V
V
V
V
V
606
616
636
646
666
2926
2926
2926
2926
2926
V
V
V
V
V
686
726
750
776
786
3226
3226
3226
3226
3226
V
V
V
V
V
392
400
433
450
505
3226
3226
3226
3226
3226
V
V
V
V
V
545
585
603
650
663
3226 V 723
3226 V 783
3226 V 843
3230
3230
3230
3230
3230
V
V
V
V
V
419
528
560
585
600
Standard products minimum order quantity on request. Other sizes and double cogged variable speed belts on request.
RMA/MPTA designation
3230
3230
3230
3230
3230
V
V
V
V
V
630
670
710
723
750
3230 V 800
3230 V 850
3432
3432
3432
3432
3432
V
V
V
V
V
450
456
480
528
534
4036 V 541
4036 V 574
4430
4430
4430
4430
4430
V
V
V
V
V
530
548
555
560
570
4430
4430
4430
4430
4430
V
V
V
V
V
578
600
610
630
652
4430
4430
4430
4430
4430
V
V
V
V
V
660
670
690
700
710
4430
4430
4430
4430
4430
V
V
V
V
V
730
750
790
800
850
4436
4436
4436
4436
4436
V
V
V
V
V
525
551
561
576
646
4436 V 750
Identication
14 = top width 14/16
22 = pulley groove angle
V
= variable speed
235 = datum length in 1/10
37
Standard Range
optibelt DK Double Section V-Belts
to DIN/ISO, ASAE
AA/HAA
BB/HBB
CC/HCC
Section AA/HAA
DD/HDD
Section BB/HBB
22 x 22
Section CC/HCC
Reference length
(mm)
Belt no.
Reference length
(mm)
Belt no.
Reference length
(mm)
Belt no.
Reference length
(mm)
2000
2032
2370
2500
2650
77
78
91
96
102
1980
2180
2300
2370
2500
75
83
88
90
95
4040
4200
4470
4500
4750
156
162
173
174
184
2280
2500
2800
3200
3310
86
94
106
122
126
2667
2800
3300
3920
103
108
128
152
2540
2600
2650
2740
2800
97
99
101
105
107
5000
5639
6900
194
221
270
3765
4000
4216
4300
4500
144
153
162
165
173
2850
2920
3000
3030
3150
109
112
115
116
121
5000
5300
5340
5750
193
204
206
224
3250
3280
3325
3390
3450
125
126
128
131
133
3500
3550
3730
3750
4010
135
137
144
145
155
AA/HAA 1350
BB/HBB 1350
CC/HCC 1600
DD/HDD 3000
22 x 22 3000
25 x 22 1600
to
to
to
to
to
to
28 000
28 000
28 000
10 000
10 000
28 000
38
mm
mm
mm
mm
mm
mm
Belt no.
25 x 22
Section DD/HDD
Reference length
(mm)
Belt no.
upon request
Section 22 x 22
5180
5220
5850
6270
Section 25 x 22
upon request
Standard Range
optibelt KS V-Grooved Pulleys optibelt TB Taper Bushes
optibelt RE Variable Speed Pulleys
39
Standard Range
optibelt KS V-Grooved Pulleys, Types
Type 1
Type 2
Type 7
Type 3
Type 8
Type 4
Type 9
Type 5
Type 10
Type 6
Type 11
Balancing
V-grooved pulleys are statically balanced in accordance with the
guidelines in VDI 2060, as standard:
Quality level G 16; for dia. dd 400 mm at n = 1500 r.p.m.; for
dia. dd > 400 mm at v = 30 m/s.
The pulleys are balanced without keys on smooth balancing
spindles. Machines whose runners are balanced with a keyway in
the end of the shaft should be ordered as follows: Balanced with
pilot bore and empty keyway on smooth balancing spindles without
key.
Standard Range
optibelt Pulleys Standards Design Criteria Types
Solid pulley
Plate pulley
V-belt pulleys with grooves for wedge belts to BS 3790 and DIN
7753 Part 1 are also suitable for classical V-belts with the same
datum width bd to BS 3790 and DIN 2215. These are known as
dual duty pulleys.
Belt
Top width
Datum width
Belt height/
groove depth
Example
Section
Spoked pulley
Grooved pulleys
SPZ
Z/10
SPZ Z/10
bo 9.7
bo 10
b1 9.7
bd = 8.5
h8
h6
bd = 8.5
tmin = 11
Standard Range
optibelt V-Grooved Pulleys DIN 2211 Page 1 for Wedge Belts and DIN 2217 Page 1
for Classical V-Belts or BS 3790 for Wedge and Classical Belts
x =
Rz 25
y =
Rz 100
Break sharp
corners
y
Table 9
ISO
designation
Y*
Z*
A*
B*
C*
BS 3790/DIN 2215
designation
10
13
17
20
22
25
32
40
BS 3790/DIN 7753
Part 1and ISO
designation
SPZ*
SPA*
SPB*
SPC*
bd
4.2
5.3
6.7
8.5
11.0
14.0
17.0
19.0
21.0
27.0
32.0
b1
5.0
6.3
8.0
9.7
12.7
16.3
20.0
22.0
25.0
32.0
40.0
1.3
1.6
2.0
2.0
2.8
3.5
5.1
4.8
6.3
8.1
12.0
V-belt
section
Wedge
belt
section
6 0.3 8 0.3 10 0.3 12 0.3 15 0.3 19 0.4 23 0.4 25,5 0.5 29 0.5 37 0.6 44,5 0.7
5 0.5 6 0.5
Endless belts
Open-ended V-belting DIN 2216
dd min
V-belts
Wedge belts
7 0.6 8 0.6 10 0.6 12,5 0.8 15 0.8 17 1.0 19 1.0 24 2.0 29 2.0
18 + 0.6
22 + 0.6 28 + 0.6 33 + 0.6
0 24 + 0.6
0
0
0
6 + 0.6 7 + 0.6 9 + 0.6 11 + 0.6 14 + 0.6 18 + 0.6
0 26 + 0.6 33 + 0.6 38 + 0.6
0
0
0
0
0
0 21 + 0.6
0
0
0
0
20
28
40
50
71
112
160
180
250
355
500
63
90
140
224
32 1 32 1 32 1
dd 50 dd 63 dd 75
42
34 1 34 1 34 1 34 1 34 1 34 1
dd 80 dd 118 dd 190 dd 250 dd 315 dd 355
36 1 36 1 36 1
dd > 50 dd > 63 dd > 75
1
2
3
4
5
6
7
8
9
10
11
12
36 30 36 30
dd 500 dd 630
38 1 38 1 38 1 38 1 38 30 38 30 38 30 38 30
dd > 80 dd > 118 dd > 190 dd > 250 dd > 315 dd > 355 dd > 500 dd > 630
10.0
16.0
22.0
28.0
34.0
40.0
12.0
20.0
28.0
36.0
44.0
52.0
60.0
14.0
24.0
34.0
44.0
54.0
64.0
74.0
84.0
16.0
28.0
40.0
52.0
64.0
76.0
88.0
100.0
112.0
(Figures in mm)
20.0
35.0
50.0
65.0
80.0
95.0
110.0
125.0
140.0
155.0
25.0
44.0
63.0
82.0
101.0
120.0
139.0
158.0
177.0
196.0
215.0
30.0
53.0
76.0
99.0
122.0
145.0
168.0
191.0
214.0
237.0
260.0
283.0
34.0
59.5
85.0
110.5
136.0
161.5
187.0
212.5
238.0
263.5
289.0
314.5
38.0
67.0
96.0
125.0
154.0
183.0
212.0
241.0
270.0
299.0
328.0
357.0
48.0
85.0
122.0
159.0
196.0
233.0
270.0
307.0
344.0
381.0
418.0
455.0
58.0
102.5
147.0
191.5
236.0
280.5
325.0
369.5
414.0
458.5
503.0
547.5
These V-pulleys also accept Optibelt SUPER TX M=S V-belts and Super X-POWER M=S wedge belts.
Standard Range
optibelt V-Grooved Pulleys DIN 2211 Page 1 for Wedge Belts
and DIN 2217 Page 1 for Classical V-Belts or BS 3790
for Wedge and Classical Belts
Table 10
V-belt
section
Wedge
belt section
ISO
designation
BS 3790/DIN 2215
designation
10
13
17
20
22
25
32
40
BS 3790/DIN 7753
Part 1 and ISO 4184
designation
SPZ
SPA
SPB
SPC
20.0
22.0
25.0
28.0
31.5
35.5
40.0
28.0
31.5
35.5
40.0
40
45.0
50.0
56.0
63.0
45.0
50.0
56.0
63.0
45
50
56
63
71.0
71.0
71
80.0
80.0
80
90.0
90
100.0
100
112.0
112
125.0
125
140
160
180
200
Datum diameter dd
0.3
40
45
50
56
63
67
71
75
80
85
90
95
100
106
112
118
125
132
140
150
160
112
118
125
132
140
150
160
170
180
190
200
212
224
250
170
180
190
200
212
224
225
236
250
170
180
190
200
212
224
225
236
250
265
280
300
315
280
300
315
355
355
355
400
400
280
300
315
335
355
375
400
425
450
450
450
450
500
560
630
500
560
630
500
560
630
710
710
800
900
1000
710
800
900
1000
0.4
90
95
100
106
112
118
125
132
140
150
160
160
180
200
224
250
280
315
min.
max.
Run out
and
side
wobble
tolerance
20.0
22.0
25.0
28.0
31.5
35.5
40.0
20.4
22.4
25.4
28.4
32.0
36.1
40.6
45.0
50.0
56.0
63.0
67.0
45.7
50.8
56.9
64.0
68.0
71.0
75.0
80.0
85.0
90.0
95.0
100.0
106.0
72.1
76.1
81.3
86.3
91.4
96.4
101.6
107.6
140
150
160
112.0
118.0
125.0
132.0
140.0
150.0
160.0
113.8
119.9
127.0
134.1
142.2
152.4
162.6
0.3
180
190
200
212
224
225
236
250
265
170.0
180.0
190.0
200.0
212.0
224.0
225.0
236.0
250.0
265.0
172.7
182.9
193.0
203.2
215.4
227.6
228.6
239.8
254.0
269.0
0.4
280.0
300.0
315.0
335.0
355.0
375.0
400.0
425.0
284.5
304.8
320.0
340.0
360.7
380.7
406.4
431.4
0.5
457.2
482.2
508.0
569.0
640.1
0.6
63
67
71
75
80
85
90
95
100
106
Datum
diameter
dd
280
300
315
335
355
375
400
425
250
280
315
0.2
355
355
400
400
450
450
500
560
630
450
475
500
560
630
500
560
630
500
560
630
500
560
630
450.0
475.0
500.0
560.0
630.0
710
800
900
1000
710
800
900
1000
710
800
900
1000
710
800
900
1000
710
800
900
1000
710.0
800.0
900.0
1000.0
721.4
812.8
914.4
1016.0
0.8
1120
1250
1400
1600
1120
1250
1400
1600
1120
1250
1400
1600
1120
1250
1400
1600
1120
1250
1400
1600
1120.0
1250.0
1400.0
1600.0
1137.9
1270.0
1422.4
1625.6
1.0
1800
2000
1800
2000
1800
2000
1800
2000
1800
2000
1800.0
2000.0
1828.8
2032.0
1.2
400
0.6
For further details see standard DIN 2211 Page 1 and DIN 2217 Page 1 or BS 3790. These V-grooved pulleys also accept Optibelt SUPER TX M=S V-belts and Super X-POWER
For Optibelt Super X-POWER M=S wedge belts
wedge belts. Figures in bold type are the preferred datum diameters. For classical V-belts only
43
Standard Range
optibelt V-Grooved Pulleys USA Standard RMA/MPTA for Wedge Belts
x =
Rz 25
y =
Rz 100
Break sharp
corners
y
Table 11
Belt section USA Standard RMA/MPTA
3V/9N
5V/15N
8V/25N
b1
8.89 0.13
15.24 0.13
25.4 0.13
10.30 0.40
17.50 0.40
28.6 0.40
9.00
+ 2.00
1.00
13.00
+ 3.00
1.00
19.0
+ 6.00
2.00
tmin
8.6
15.0
25.1
da min
63
140
315
36 25
da 63 to 90
38 25
da > 90 to 150
38 25
da 140 to 255
38 25
315 to 405
40 25
da > 150 to 305
40 25
da > 255 to 405
40 25
da >405 to 570
42 25
da > 305
42 25
da > 405
42 25
da > 570
18.0
26.0
38.0
28.3
43.5
66.6
38.6
61.0
95.2
48.9
78.5
123.8
59.2
96.0
152.4
69.5
113.5
181.0
79.8
131.0
209.6
90.1
148.5
238.2
100.4
166.0
266.8
10
110.7
183.5
295.4
11
121.0
201.0
324.0
12
131.3
218.5
(Values in mm)
352.6
For drives with several grooves the total of all deviations from the nominal value e for all groove distances of a pulley +/ 0.8 mm must not be exceeded. For further
details see USA Standard RMA/MPTA.
Note:
The permissible variations of the V-grooved pulley according to USA Standard RMA/MPTA deviate only slightly from the values contained in ISO 5290 Grooved pulleys
for joined narrow belts (kraftbands). Therefore Optibelt KB Kraftbands can be used for V-grooved pulleys manufactured according to both standards.
These V-grooved pulleys are also used for Optibelt Super X-POWER M=S wedge belts.
44
Standard Range
optibelt V-Pulleys for Kraftbands
x =
Rz 25
y =
Rz 100
Break sharp
corners
y
Table 12: V-pulleys for kraftbands with wedge belts according to ISO 5290
da
30
67 to 90
> 90 to 150
> 150 to 300
> 300
36
38
40
42
5V/15J
180 to 250
> 250 to 400
> 400
8V/25J
315 to 400
> 400 to 560
> 560
Section
3V/9J
b1
h1max
h2max
tmin
Tol e1)
Tol e2)
fmin
da min
8.9
0.20
0.30
8.9
10.3
0.25
0.5
67
38
40
42
15.2
0.25
0.40
15.2
17.5
0.25
0.5
13
180
38
40
42
25.4
0.30
0.50
25.4
28.6
0.40
0.8
19
315
2. the belts are still seated deep enough in the pulley grooves to
ensure full transmission of power.
h2
b1
da
The International Standard ISO 5290 species pulley groove dimensions for belt sections 3V/9J, 5V/15J, 8V/25J. The groove top
width b1 is used as the basic reference dimension for standardisation of the grooves and the joined V-belts. The pulley groove and
the joined V-belts are considered in the Standard ISO 5290 as a
single unit.
h1
b1 = effective width
da = effective outside diameter
The groove faces must be straight at least to the level of da 2 h2.
Table 13: V-pulleys for kraftbands with section SPZ, SPA, SPB and SPC according to BS 3790/DIN 2211/ISO 4183
dd
30
SPZ
71 to 80
> 80
SPA
b1
tmin
Tol e1)
Tol e2)
34
38
9.7
2.0
11
12.0
0.3
0.6
8.0
71
100 to 118
> 118
34
38
12.7
2.8
14
15.0
0.3
0.6
10.0
100
SPB
160 to 190
> 190
34
38
16.3
3.5
18
19.0
0.4
0.8
12.5
160
SPC
250 to 315
> 315
34
38
22.0
4.8
24
25.5
0.40
0.8
17.0
250
Section
fmin
dd min
45
Standard Range
optibelt V-Pulleys for Kraftbands
Table 14: V-pulleys for kraftbands with classical V-belts ISO 5291/ASAE S211.5
b1
h1max
h2max
tmin
Tol e1)
Tol e2)
fmin
da min
13.0
0.20
0.35
1.5
12.0
15.88
0.3
0.6
9.0
80
34
38
16.5
0.25
0.40
2.0
14.0
19.05
0.4
0.8
11.5
130
210 to 325
> 325
34
38
22.4
0.30
0.45
3.0
19.0
25.40
0.5
1.0
16.0
210
370 to 490
> 490
36
38
32.8
0.30
0.55
4.5
26.0
36.53
0.6
1.2
23.0
370
Section
da
30
AJ/HA
80 to 125
> 125
34
38
BJ/HB
130 to 195
> 195
CJ/HC
DJ/HD
3V/9J
5V/15J 8V/25J
Number
of grooves
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
46
SPZ
SPA
SPB
SPC
43.50
61.00
78.50
96.00
113.50
131.00
148.50
166.00
183.50
201.00
218.50
236.00
253.50
271.00
288.50
306.00
323.50
341.00
358.50
376.00
393.50
411.00
428.50
446.00
463.50
481.00
498.50
516.00
533.50
551.00
568.50
586.00
603.50
621.00
638.50
656.00
673.50
691.00
708.50
66.60
95.20
123.80
152.40
181.00
209.60
238.20
266.80
295.40
324.00
352.60
381.20
409.80
438.40
467.00
495.60
524.20
552.80
581.40
610.00
638.60
667.20
695.80
724.40
753.00
781.60
810.20
838.80
867.40
896.00
924.60
953.20
981.80
1010.40
1039.00
1067.60
1096.20
1124.80
1153.40
28.00
40.00
52.00
64.00
76.00
88.00
100.00
112.00
124.00
136.00
148.00
160.00
172.00
184.00
196.00
208.00
220.00
232.00
244.00
256.00
268.00
280.00
292.00
304.00
316.00
328.00
340.00
352.00
364.00
376.00
388.00
400.00
412.00
424.00
436.00
448.00
460.00
472.00
484.00
35.00
50.00
65.00
80.00
95.00
110.00
125.00
140.00
155.00
170.00
185.00
200.00
215.00
230.00
245.00
260.00
275.00
290.00
305.00
320.00
335.00
350.00
365.00
380.00
395.00
410.00
425.00
440.00
455.00
470.00
485.00
500.00
515.00
530.00
545.00
560.00
575.00
590.00
605.00
44.00
63.00
82.00
101.00
120.00
139.00
158.00
177.00
196.00
215.00
234.00
253.00
272.00
291.00
310.00
329.00
348.00
367.00
386.00
405.00
424.00
443.00
462.00
481.00
500.00
519.00
538.00
557.00
576.00
595.00
614.00
633.00
652.00
671.00
690.00
709.00
728.00
747.00
766.00
59.50
85.00
110.50
136.00
161.50
187.00
212.50
238.00
263.50
289.00
314.50
340.00
365.50
391.00
416.50
442.00
467.50
493.00
518.50
544.00
569.50
595.00
620.50
646.00
671.50
697.00
722.50
748.00
773.50
799.00
824.50
850.00
875.50
901.00
926.50
952.00
977.50
1003.00
1028.50
AJ/HA
BJ/HB
CJ/HC
DJ/HD
57.40
82.80
108.20
133.60
159.00
184.40
209.80
235.20
260.60
286.00
311.40
336.80
362.20
387.60
413.00
438.40
463.80
489.20
514.60
540.00
565.40
590.80
616.20
641.60
667.00
692.40
717.80
743.20
768.60
794.00
819.40
844.80
870.20
895.60
921.00
946.40
971.80
997.20
1022.60
82.53
119.06
155.59
192.12
228.65
265.18
301.71
338.24
374.77
401.30
447.83
484.36
520.89
557.42
593.95
630.48
667.01
703.54
740.07
776.60
813.13
849.66
886.19
922.72
959.25
995.78
1032.31
1068.84
1105.37
1141.90
1178.43
1214.96
1251.49
1288.02
1324.55
1361.08
1397.61
1434.14
1470.67
b2 = (z 1) e + 2 f
33.88
49.76
65.64
81.52
97.40
113.28
129.16
145.04
160.92
176.80
192.68
208.56
224.44
240.32
256.20
272.08
287.96
303.84
319.72
335.60
351.48
367.36
383.24
399.12
415.00
430.88
446.76
462.64
478.52
494.40
510.28
526.16
542.04
557.92
573.80
589.68
605.56
621.44
637.32
42.05
61.10
80.15
99.20
118.25
137.30
156.35
175.40
194.45
213.50
232.55
251.60
270.65
289.70
308.75
327.80
346.85
365.90
384.95
404.00
423.05
442.10
461.15
480.20
499.25
518.30
537.35
556.40
575.45
594.50
613.55
632.60
651.65
670.70
689.75
708.80
727.85
746.90
765.95
Standard Range
optibelt Deep Grooved Pulleys
x =
Rz 25
y =
Rz 100
Break sharp
corners
y
Table 16
Section
SPZ
SPA
SPB
SPC
Z/10
A/13
B/17
C/22
8.5
11.0
14.0
19.0
= 34
11.0
15.0
18.9
26.3
= 38
11.3
15.4
19.5
27.3
4.0
6.5
8.0
12.0
14 0.3
18 0.3
23.0 0.4
31 0.5
8 0.6
10 0.6
12.5 0.8
17 1.0
13
18
22.5
31.5
34 1
dd 63 to 80
34 1
dd 90 to 118
34 1
dd 140 to 190
34 30
dd 224 to 315
38 1
dd > 80
38 1
dd >118
38 1
dd > 190
38 30
dd > 315
34 1
dd 50 to 80
34 1
dd 71 to 118
34 1
dd 112 to 190
34 30
dd 180 to 315
38 1
dd > 80
38 1
dd >118
38 1
dd > 190
38 30
dd > 315
16
20
25
34
tmin
29
37
47
64
42
54
69
94
55
71
91
124
68
88
113
154
81
105
135
184
94
122
157
214
107
139
179
244
120
156
201
274
10
133
173
223
304
11
146
190
245
334
12
159
207
267
364
47
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes
Grooves to BS 3790/DIN 2211
Section SPZ/Z/10
Datum
diameter
dd
(mm)
No.
of
grooves
Weight
without
bush
( kg)
Taper
bush
50
1
2
11
11
0.30
0.40
1008
1008
56
1
2
11
11
0.40
0.50
1008
1108
60
1
2
8
11
0.20
0.60
1008
1108
63
1
2
3
8
6
6
0.20
0.30
0.40
1108
1108
1108
67
1
2
3
8
6
6
0.30
0.40
0.50
1108
1108
1108
71
1
2
3
8
6
6
0.30
0.40
0.60
1108
1108
1108
75
1
2
3
8
6
6
0.40
0.40
0.50
1108
1210
1210
80
1
2
3
4
8
6
6
6
0.50
0.60
0.70
0.80
1210
1210
1210
1210
85
1
2
3
4
5
8
6
6
6
6
0.60
0.50
0.60
0.90
1.00
1210
1610
1610
1610
1610
90
1
2
3
4
5
8
6
6
6
6
0.70
0.70
0.80
1.00
1.20
1210
1610
1610
1610
1610
1
2
3
4
5
8
6
6
6
6
0.70
0.80
0.90
1.10
1.30
1210
1610
1610
1610
1610
1
2
3
4
5
6*
8
6
6
6
6
6
0.80
0.90
1.10
1.10
1.30
1.40
1210
1610
1610
1610
2012
2012
95
100
Type
for Section 10
for
Section ZX/X10
Datum
diameter
dd
(mm)
No.
of
grooves
8
6
6
6
6
6
0.90
1.10
1.30
1.30
1.50
1.60
1610
1610
1610
1610
2012
2012
112
1
2
3
4
5
6*
8
6
6
6
6
6
1.00
1.30
1.30
1.50
1.80
1.90
1610
1610
2012
2012
2012
2012
118
1
2
3
4
5
6*
8
6
6
6
6
6
0.90
1.30
1.60
1.80
1.80
2.00
1610
1610
2012
2012
2012
2517
125
1
2
3
4
5
6*
8
6
2
2
6
6
1.00
1.40
1.80
2.20
2.30
2.50
1610
1610
2012
2012
2012
2517
132
1
2
3
4
5
6*
8
6
2
2
6
6
1.10
1.50
2.30
2.50
2.70
2.90
1610
1610
2012
2012
2517
2517
140
1
2
3
4
5
6*
8*
8
2
2
2
2
2
4
1.20
1.70
2.60
2.90
3.20
3.50
4.00
1610
1610
2012
2012
2517
2517
2517
150
1
2
3
4
5
6*
8*
8
8
2
2
2
2
4
1.20
2.00
3.10
3.70
4.00
4.40
5.10
1610
2012
2012
2517
2517
2517
2517
16
28
40
52
64
76
100
Taper bush
1008
1108
1210
1610
2012
2517
3020
10-25
10-28
11-32
14-42
14-50
16-60
25-75
48
Taper
bush
1
2
3
4
5
6*
Weight
without
bush
( kg)
106
No. of grooves z
Type
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 66
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes
Grooves to BS 3790/DIN 2211
Section SPZ/Z/10
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
160
1
2
3
4
5
6*
8*
8
8
2
2
2
2
4
1.30
2.50
3.60
4.40
4.80
5.20
5.60
1610
2012
2012
2517
2517
2517
2517
280
1
2
3
4
5
6*
8*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
2.90
4.00
5.30
6.40
7.10
7.80
10.80
2012
2012
2517
2517
2517
2517
3020
170
1
2
3
4
5
6*
8
8
9
2
2
2
1.50
2.50
4.20
5.30
5.90
6.50
1610
2012
2012
2517
2517
2517
315
1
2
3
4
5
6*
x
x
x
x
x
x
7
7
7
10
10
10
3.10
4.20
6.10
7.60
8.60
9.30
2012
2012
2517
2517
2517
2517
180
1
2
3
4
5
6*
8*
O
O
O
O
8
8
9
9
9
9
4
1.60
2.50
4.80
6.10
6.30
6.80
7.10
1610
2012
2012
2517
2517
2517
3020
355
1
2
3
4
5
6*
8*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
3.50
5.10
7.30
8.90
10.00
10.70
16.00
2012
2012
2517
2517
2517
2517
3030
190
1
2
3
4
5
6*
O
O
O
O
8
8
9
9
9
9
1.80
2.60
4.90
5.30
6.30
6.90
1610
2012
2012
2517
2517
2517
400
200
1
2
3
4
5
6*
8*
O
O
O
O
8
8
9
9
9
9
4
2.30
2.80
3.50
4.70
5.50
6.10
9.30
2012
2012
2012
2517
2517
2517
3020
1
2
3
4
5
6*
8*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
6.00
6.30
8.00
10.10
11.70
14.50
18.20
2012
2517
2517
2517
3020
3020
3030
450
224
1
2
3
4
5
6*
8*
O
O
O
O
O
O
5
5
9
9
9
9
4
2.50
3.20
3.90
5.20
6.00
6.60
11.80
2012
2012
2012
2517
2517
2517
3020
1
2
3
4
5
6*
8*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
6.10
8.20
9.80
11.80
13.90
16.90
24.00
2517
2517
2517
3020
3020
3030
3535
500
2
3
4
5
6*
x
x
x
x
x
7
7
10
10
10
9.10
11.40
14.30
17.60
19.90
2517
2517
3020
3020
3020
250
1
2
3
4
5
6
8*
x
x
x
x
x
x
x
7
7
10
10
10
10
10
2.80
3.50
4.30
5.70
7.00
7.00
10.50
2012
2012
2012
2517
2517
2517
3020
630
3
4
5
6*
x
x
x
x
7
10
10
7
15.90
20.00
22.70
33.60
2517
3020
3020
3535
No. of grooves z
Face width b2 (mm)
16
28
40
52
64
76
100
Taper bush
1610
2012
2517
3020
3030
3535
14-42
14-50
16-60
25-75
35-75
35-90
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 66
49
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes
Grooves to BS 3790/DIN 2211
Section SPA/A/13
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
63
1
2
11
11
0,60
0,80
1108
1108
67
1
2
8
6
0,30
0,50
1108
1108
71
1
2
3
8
6
6
0,30
0,50
0,70
1108
1108
1108
75
1
2
3
8
6
6
0,40
0,60
0,80
1108
1108
1108
80
1
2
3
8
6
6
0,50
0,60
0,90
1210
1210
1210
85
1
2
3
8
6
6
0,60
0,70
1,00
1210
1210
1210
90
1
2
3
4
8
6
6
6
0,70
0,70
1,00
1,20
1210
1610
1610
1615
95
1
2
3
4
8
6
6
6
0,80
0,90
1,10
1,40
1210
1610
1610
1615
100
1
2
3
4
5
8
6
2
2
6
0,80
0,90
1,20
1,70
1,90
1610
1610
1610
1610
1610
106
1
2
3
4
5
8
6
2
6
6
0,90
1,10
1,40
2,00
2,00
1610
1610
1610
2012
2012
112
1
2
3
4
5
8
6
6
6
6
1,00
1,20
1,30
1,90
2,10
1610
1610
2012
2012
2012
for Section 13
for
No. of grooves z
Face width b2 (mm)
Section AX/X13
Datum
diameter
dd
(mm)
No.
of
grooves
Weight
without
bush
( kg)
Taper
bush
118
1
2
3
4
5
8
6
2
2
2
1,20
1,40
1,80
2,00
2,40
1610
1610
2012
2012
2012
125
1
2
3
4
5
8
2
2
2
2
1,40
1,70
2,00
2,50
2,70
1610
1610
2012
2012
2012
132
1
2
3
4
5
8
2
2
2
2
1,60
1,80
2,30
2,60
2,90
1610
2012
2012
2517
2517
140
1
2
3
4
5
8
2
2
2
2
1,80
2,00
2,80
3,10
3,40
1610
2012
2517
2517
2517
150
1
2
3
4
5
8
2
2
2
2
1,40
2,40
3,50
3,80
4,20
1610
2012
2517
2517
2517
160
1
2
3
4
5
5
2
2
2
2
1,90
2,90
3,90
4,40
5,10
1610
2012
2517
2517
2517
170
1
2
3
4
5
5
2
2
2
2
2,00
3,10
4,60
5,50
5,90
1610
2012
2517
2517
3020
180
1
2
3
4
5
O
O
5
9
2
2
2
2,10
3,40
5,10
5,90
6,20
1610
2012
2517
2517
3020
190
1
2
3
4
5
O
O
5
9
2
2
2
2,30
3,80
5,40
6,80
7,40
1610
2012
2517
2517
3020
20
35
50
65
80
Taper bush
1108
1210
1610
1615
2012
2517
3020
10-28
11-32
14-42
14-42
14-50
16-60
25-75
50
Type
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 66
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes
Grooves to BS 3790/DIN 2211
Section SPA/A/13
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
Datum
diameter
dd
(mm)
No.
of
grooves
Weight
without
bush
( kg)
Type
Taper
bush
200
1
2
3
4
5
O
O
O
5
5
9
2
4
2.60
4.10
4.90
7.40
8.40
2012
2517
2517
3020
3020
450
1
2
3
4
5
x
x
x
x
x
7
7
7
10
7
7.00
10.30
14.10
15.50
24.30
2012
2517
3020
3020
3535
212
1
2
3
4
5
O
O
O
5
5
9
2
2
2.70
4.30
5.20
7.30
8.20
2012
2517
2517
3020
3020
500
1
2
3
4
5
x
x
x
x
x
7
7
7
10
7
8.00
11.60
16.00
18.20
27.30
2517
2517
3020
3020
3535
224
1
2
3
4
5
x
O
O
7
5
9
2
2
2.70
4.40
5.50
7.40
8.30
2012
2517
2517
3020
3020
560
1
2
3
4
5
x
x
x
x
x
7
7
7
7
7
11.60
15.50
17.80
26.70
30.40
2517
3020
3020
3535
3535
236
1
2
3
4
5
x
O
O
7
5
9
2
2
2.80
4.60
5.70
7.80
8.70
2012
2517
2517
3020
3020
630
1
2
3
4
5
x
x
x
x
x
7
7
7
7
7
10.10
16.00
22.00
30.80
33.70
2517
3020
3020
3535
3535
250
1
2
3
4
5
x
x
O
O
O
7
7
9
9
9
2.90
4.80
5.90
8.00
9.00
2012
2517
2517
3020
3020
280
1
2
3
4
5
x
x
O
O
O
7
7
9
9
5
3.30
5.40
6.70
8.80
15.50
2012
2517
2517
3020
3535
315
1
2
3
4
5
x
x
O
O
O
7
7
5
9
5
3.60
6.00
8.30
9.70
17.00
2012
2517
3020
3020
3535
355
1
2
3
4
5
x
x
x
x
x
7
7
7
10
7
4.20
6.70
9.20
11.00
18.60
2012
2517
3020
3020
3535
400
1
2
3
4
5
x
x
x
x
x
7
7
7
10
7
4.90
8.10
11.00
12.80
21.00
2012
2517
3020
3020
3535
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
20
35
50
65
80
Taper bush
2012
2517
3020
3535
14-50
16-60
25-75
35-90
No. of grooves z
51
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes
Grooves to BS 3790/DIN 2211
Section SPB/B/17
Datum
diameter
dd
(mm)
Type
Weight
without
bush
( kg)
Taper
bush
Datum
diameter
dd
(mm)
100
1
2
3
1
6
6
0.90
1.20
1.70
1610
1610
1610
112
1
2
3
1
6
6
1.10
1.50
2.00
1610
1610
1610
118
1
2
3
1
6
6
1.30
1.70
2.30
1610
1610
1610
125
1
2
3
4
5
1
2
2
4
6
1.50
1.90
2.40
3.00
3.50
1610
2012
2012
2012
2012
132
1
2
3
4
5
1
2
2
4
4
1.80
2.20
2.80
3.40
3.70
1610
2012
2012
2012
2012
140
1
2
3
4
5
6
1
2
2
2
2
4
2.30
2.70
3.30
3.70
4.50
4.60
1610
2012
2012
2517
2517
2517
150
1
2
3
4
5
6
1
2
2
2
4
4
2.70
3.10
3.90
4.40
5.20
5.60
1610
2012
2517
2517
2517
2517
1
2
3
4
5
6
1
2
2
4
4
4
2.50
2.90
4.20
4.90
6.00
5.40
1610
2012
2517
2517
2517
3020
1
2
3
4
5
6
8
1
2
2
4
4
4
4
2.90
3.30
4.90
5.70
6.10
6.50
8.00
1610
2012
2517
2517
3020
3020
3020
160
170
No.
of
grooves
for Section 17
for
Section BX/X17
No.
of
grooves
Taper
bush
1
2
3
4
5
6
8
1
8
2
4
4
4
4
4.10
4.50
5.50
6.90
7.10
7.70
9.50
1610
2517
2517
2517
3020
3020
3020
190
1
2
3
4
5
6
8
8
8
2
4
4
4
4
4.60
5.00
6.30
7.60
8.10
9.20
11.20
2012
2517
2517
2517
3020
3020
3030
200
1
2
3
4
5
6
8
8
8
2
2
2
4
4
5.00
5.40
6.50
8.80
9.10
10.30
13.50
2012
2517
2517
3020
3020
3020
3535
212
1
2
3
4
5
6
8
8
8
2
2
2
4
4
4.20
4.90
6.00
9.80
11.00
14.30
16.60
2012
2517
2517
3020
3020
3535
3535
224
1
2
3
4
5
6
8
10
8
8
2
2
2
4
4
4
4.70
5.30
6.30
11.30
12.70
17.00
19.30
21.80
2012
2517
2517
3020
3020
3535
3535
3535
236
1
2
3
4
5
6
8
10
x
x
8
8
10
10
6
4
4
4
5.00
5.50
7.00
14.50
16.90
20.00
22.30
25.30
2012
2517
2517
3020
3535
3535
3535
3535
10
25
44
63
82
101
120
158
196
Taper bush
1610
2012
2517
3020
3030
3535
14-42
14-50
16-60
25-75
35-75
35-90
52
Weight
without
bush
( kg)
180
No. of grooves z
Type
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 66
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes
Grooves to BS 3790/DIN 2211
Section SPB/B/17
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
Datum
diameter
dd
(mm)
No.
of
grooves
250
1
2
3
4
5
6
8
10
8
7
2
2
2
4
4
4
5.40
5.50
7.70
19.60
21.70
23.30
27.50
29.30
2012
2517
3020
3020
3535
3535
3535
3535
265
2
3
4
6
8
O
O
O
O
7
9
9
9
9
6.20
8.00
9.50
16.70
24.00
2517
3020
3020
3525
3525
280
1
2
3
4
5
6
8
10
x
x
x
O
O
O
O
O
7
7
10
9
9
9
9
9
6.10
6.80
8.60
10.10
17.80
19.60
26.70
30.50
2012
2517
3020
3020
3535
3535
3535
3535
2
3
4
5
6
8
x
x
O
O
O
O
7
10
9
9
9
9
7.30
9.20
14.30
18.20
21.90
26.20
2517
3020
3020
3535
3535
3535
1
2
3
4
5
6
8
10
x
x
x
O
O
O
O
O
7
7
10
5
9
9
9
9
7.20
7.80
9.60
17.10
18.80
23.00
26.00
31.50
2012
2517
3020
3535
3535
3535
3535
3535
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
10
7
10
10
10
10
7.80
10.50
18.30
19.50
22.00
28.20
36.00
2517
3020
3535
3535
3535
3535
4040
10
25
44
63
82
101
120
158
196
Taper bush
2012
2517
3020
3030
3535
14-50
16-60
25-75
35-75
35-90
300
315
335
No. of grooves z
Face width b2 (mm)
Type
Weight
without
bush
( kg)
Taper
bush
355
2
3
4
5
6
8
10*
x
x
x
x
O
x
x
7
10
7
10
9
10
10
8.70
10.80
18.60
20.80
22.80
27.00
38.00
3020
3020
3535
3535
3535
3535
4040
375
2
3
4
6
8
x
x
x
x
x
7
10
10
10
10
9.50
11.50
16.50
25.00
28.00
3020
3020
3525
3535
4040
400
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
10.00
18.30
20.50
23.40
25.10
36.50
41.00
3020
3535
3535
3535
3535
4040
4040
425
2
3
4
6
8
x
x
x
x
x
7
7
10
10
10
11.50
18.00
19.50
25.10
52.50
3020
3535
3535
4040
4545
450
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
12.10
21.90
24.50
27.30
35.50
40.90
53.50
3020
3535
3535
3535
4040
4040
4545
500
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
13.20
23.10
26.60
29.90
38.90
45.50
61.00
3020
3535
3535
3535
4040
4040
4545
560
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
7
7
7
10
10
10
16.50
25.90
29.00
35.30
43.10
49.00
55.70
3030
3535
3535
4040
4040
4545
4545
4040
4545
40-100 55-110
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 66
53
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes
Grooves to BS 3790/DIN 2211
Section SPB/B/17
Datum
diameter
dd
(mm)
No.
of
grooves
Weight
without
bush
( kg)
Type
Datum
diameter
dd
(mm)
Taper
bush
630
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
7
7
7
10
10
10
18.50
28.90
33.30
43.10
49.20
62.00
72.00
3020
3535
3535
4040
4040
4545
4545
710
3
4
5
6
8
10*
x
x
x
x
x
x
7
7
7
10
10
10
33.20
39.10
50.20
62.30
71.00
80.00
3535
3535
4040
4545
4545
4545
800
3
4
5
6
8
10*
x
x
x
x
x
x
7
7
7
10
10
10
36.70
48.80
56.10
71.40
90.90
102.00
3535
4040
4040
4545
4545
4545
900
3
4
5
6
8
10*
x
x
x
x
x
x
7
7
7
10
10
10
46.80
60.00
74.80
81.50
110.00
126.00
3535
4040
4545
4545
4545
5050
1000
3
4
5
6
8
10*
x
x
x
x
x
x
7
7
7
10
10
10
56.50
66.50
80.50
90.00
132.00
147.00
4040
4040
4545
4545
5050
5050
No.
of
grooves
10
44
63
82
101
120
158
196
Taper bush
3030
3535
4040
4545
5050
35-75
35-90
40-100
55-110
70-125
No. of grooves z
54
Type
Weight
without
bush
( kg)
Taper
bush
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 66
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes
Grooves to BS 3790/DIN 2211
Section SPC/C/22
Datum
diameter
dd
(mm)
Weight
without
bush
( kg)
Type
3
4
5
6
4
4
4
4
9.00
10.50
14.00
17.00
2517
3020
3535
3535
212
3
4
5
6
4
4
4
4
10.00
12.50
15.00
18.00
3020
3020
3535
3535
2
3
4
5
6
8
4
4
4
4
4
4
8.10
11.00
14.00
16.20
19.00
24.90
3020
3020
3535
3535
3535
3535
3
4
5
6
8
4
4
4
4
4
12.00
17.20
19.10
20.80
25.50
3020
3535
3535
3535
3535
2
3
4
5
6
8
10*
4
4
4
4
4
4
4
9.80
14.50
20.70
22.80
26.00
29.70
34.00
3
4
5
6
8
O
O
O
O
8
9
9
9
9
3
4
5
6
8
10*
O
O
O
O
O
3
4
5
6
8
10*
O
O
O
O
236
250
265
280
300
for Section 22
for
Datum
diameter
dd
(mm)
Taper
bush
200
224
No.
of
grooves
No.
of
grooves
3
4
5
6
8
10*
O
O
O
O
5
9
9
9
4
9
21.60
24.60
29.00
31.40
50.00
58.00
3535
3535
3535
3535
4040
4545
335
3
4
5
6
8
O
O
O
O
O
5
9
9
9
9
22.50
26.50
30.00
35.00
58.00
3535
3535
3535
3535
4040
355
3
4
5
6
8
10*
O
O
O
O
O
O
5
9
9
9
9
9
22.90
28.30
32.50
36.00
67.50
121.00
3535
3535
3535
3535
4040
4545
375
3020
3020
3535
3535
3535
3535
4040
3
4
5
6
8
O
O
O
O
O
5
9
9
9
9
23.80
30.00
33.00
45.50
68.00
3535
3535
3535
4040
4545
400
21.20
24.00
26.20
29.00
33.30
3535
3535
3535
3535
3535
3
4
5
6
8
10*
x
x
x
O
O
O
7
10
10
9
9
9
24.10
28.00
34.00
48.00
65.00
88.00
3535
3535
3535
4040
4545
5050
425
8
9
9
9
9
9
24.00
29.00
31.00
33.80
37.50
45.00
3535
3535
3535
3535
3535
4040
3
4
5
6
8
x
x
O
O
O
7
10
9
9
9
26.00
31.00
45.00
58.00
74.00
3535
3535
4040
4545
4545
450
5
9
9
9
4
9
21.00
25.00
28.50
29.00
46.50
53.50
3535
3535
3535
3535
4040
4545
3
4
5
6
8
10*
x
x
x
O
O
O
7
10
10
9
9
9
28.60
33.50
45.00
61.10
78.70
101.00
3535
3535
4040
4545
5050
5050
475
3
4
5
6
8
x
x
x
O
O
7
10
10
9
9
40.00
47.00
47.20
62.80
81.50
3535
3535
4040
4545
5050
Section CX/X22
10
85
110,5
136
161,5
212,5
263,5
Taper bush
2517
3020
3535
4040
4545
5050
16-60
25-75
35-90
40-100
55-110
70-125
Taper
bush
315
No. of grooves z
Weight
without
bush
( kg)
Type
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 66
55
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes
Grooves to BS 3790/DIN 2211
Section SPC/C/22
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
500
3
4
5
6
8
10*
x
x
x
x
O
O
7
10
10
10
9
9
30.90
39.00
48.70
60.20
87.40
127.00
3535
3535
4040
4545
5050
5050
560
3
4
5
6
8
10*
x
x
x
x
x
O
7
10
10
10
10
9
36.00
50.00
63.00
77.00
94.00
115.00
3535
4040
4545
5050
5050
5050
630
3
4
5
6
8
10*
x
x
x
x
x
O
7
7
10
10
10
9
48.50
61.00
77.00
86.00
105.50
130.00
4040
4545
5050
5050
5050
5050
710
3
4
5
6
8
10*
x
x
x
x
x
O
7
7
10
10
10
9
4040
4545
5050
5050
5050
5050
800
3
4
5
6
8
10*
x
x
x
x
x
O
7
7
10
10
10
9
4545
5050
5050
5050
5050
5050
1000
5
6
8
10*
x
x
x
O
10
10
10
9
5050
5050
5050
5050
1250
5
6
8
10*
x
x
x
O
10
10
10
9
5050
5050
5050
5050
No. of grooves z
Face width b2 (mm)
Datum
diameter
dd
(mm)
No.
of
grooves
10
85
110,5
136
161,5
212,5
263,5
Taper bush
3535
4040
4545
5050
35-90
40-100
55-110
70-125
56
Type
Weight
without
bush
( kg)
Taper
bush
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 66
Standard Range
optibelt KS V-Grooved Pulleys for Plain Boring
Grooves According to BS 3790/DIN 2211
Section SPZ/Z/10
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
Datum
diameter
dd
(mm)
0.23
0.30
0.40
16
16
16
24
35
35
O
O
O
0.30
0.40
0.50
20
20
20
1
2
3
O
O
O
0.32
0.45
0.65
63
1
2
3
O
O
O
71
1
2
3
75
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
0.81
1.30
1.62
30
38
40
24
35
40
O
O
O
0.92
1.40
1.69
28
38
38
24
38
40
1
2
3
x
O
O
1.05
1.50
1.85
28
38
38
24
38
40
160
1
2
3
x
x
x
1.22
1.60
2.40
32
38
42
30
38
40
24
35
40
170
1
2
3
x
x
x
1.66
1.85
3.00
40
40
42
30
38
40
24
24
28
24
35
40
180
1
2
3
x
x
x
2.10
3.05
3.50
32
38
42
30
38
40
0.35
0.65
1.10
25
30
38
24
35
35
190
1
2
3
x
x
x
2.25
2.35
4.00
35
35
35
30
38
40
O
O
O
0.30
0.70
1.10
25
30
38
24
35
35
200
1
2
3
x
x
x
2.40
2.85
4.45
32
38
42
38
38
40
1
2
3
O
O
O
0.38
0.75
1.15
25
30
38
24
35
38
212
1
2
3
x
x
x
2.60
3.40
5.00
35
35
38
30
38
40
95
1
2
3
O
O
O
0.40
0.83
1.20
28
28
38
24
35
38
225
1
2
3
x
x
x
2.80
4.00
5.30
32
38
42
38
38
40
100
1
2
3
O
O
O
0.48
0.90
1.25
28
30
38
24
35
38
250
1
2
3
x
x
x
3.30
4.80
6.00
32
38
42
38
38
40
106
1
2
3
O
O
O
0.50
0.96
1.32
30
28
38
24
35
38
280
1
2
3
x
x
x
3.85
5.20
7.00
35
42
48
34
38
40
112
1
2
3
O
O
O
0.54
1.00
1.40
28
30
38
24
35
38
315
1
2
3
x
x
x
4.35
6.80
8.25
35
42
48
34
38
40
118
1
2
3
O
O
O
0.60
1.10
1.47
28
38
38
24
35
38
355
1
2
3
x
x
x
4.60
8.00
10.00
35
42
48
34
40
45
125
1
2
3
O
O
O
0.70
1.20
1.55
28
30
38
24
35
40
Datum
diameter
dd
(mm)
No.
of
grooves
Type
No.
of
grooves
Type
45
1
2
3
O
O
O
132
1
2
3
O
O
O
50
1
2
3
24
35
40
140
1
2
3
56
20
25
25
24
35
40
150
0.34
0.60
0.85
25
25
25
24
35
40
O
O
O
0.34
0.62
1.00
25
25
30
1
2
3
O
O
O
0.35
0.64
1.05
80
1
2
3
O
O
O
85
1
2
3
90
No. of grooves z
Face width b2 (mm)
for
Weight
( kg)
Section ZX/X10
Weight
( kg)
16
28
40
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: ush one side
Material: EN-GJL 200 (GG 20) DIN 1691
57
Standard Range
optibelt KS V-Grooved Pulleys for Plain Boring
Grooves According to BS 3790/DIN 2211
Section SPA/A/13
0.88
1.65
2.20
3.24
3.85
28
28
32
32
35
34
49
42
53
60
O
O
O
O
O
1.09
1.75
2.38
3.37
3.95
28
38
38
42
42
34
49
42
53
60
1
2
3
4
5
O
O
O
O
O
1.10
1.80
2.42
3.42
4.10
32
38
42
42
48
34
49
42
53
65
125
34
49
42
60
82
1
2
3
4
5
O
O
O
O
O
1.38
1.90
2.55
3.49
4.40
32
38
42
42
48
34
49
42
53
65
132
28
32
38
38
38
34
49
42
60
55
1
2
3
4
5
O
O
O
O
O
1.45
2.20
2.58
3.58
4.75
32
38
42
42
48
34
49
42
53
65
140
0.64
1.20
1.40
1.98
2.20
24
28
28
28
32
34
49
42
53
55
1
2
3
4
5
O
O
O
O
O
1.52
2.33
2.63
3.65
4.95
32
38
42
42
48
34
49
42
53
65
150
O
O
O
O
O
0.88
1.47
1.62
2.22
2.51
28
32
38
42
42
34
49
42
53
67
1
2
3
4
5
x
x
O
O
O
1.60
2.59
2.95
4.04
5.15
38
38
42
42
48
36
49
42
53
65
160
1
2
3
4
5
O
O
O
O
O
0.76
1.57
1.89
2.47
2.75
28
28
28
32
35
34
49
42
53
67
1
2
3
4
5
x
x
x
O
O
1.75
2.40
2.80
3.62
5.45
38
38
42
48
48
36
49
42
60
70
170
1
2
3
4
5
O
O
O
O
O
0.84
1.36
1.98
2.72
3.10
28
32
38
42
42
34
49
52
53
60
1
2
3
4
5
x
x
x
x
x
2.00
2.90
3.20
4.20
5.80
35
35
35
35
38
36
49
42
60
70
Datum
diameter
dd
(mm)
0.34
0.48
0.55
18
18
18
34
49
47
106
O
O
O
0.42
0.62
0.74
20
20
20
34
49
47
1
2
3
4
5
O
O
O
O
O
112
1
2
3
4
5
O
O
O
O
O
0.52
0.77
0.85
1.23
1.48
25
25
25
25
25
34
49
47
60
70
1
2
3
4
5
118
1
2
3
4
5
O
O
O
O
O
0.50
0.89
0.96
1.47
1.83
25
28
32
32
32
34
49
42
60
70
75
1
2
3
4
5
O
O
O
O
O
0.53
1.02
1.08
1.76
1.92
24
24
24
24
28
80
1
2
3
4
5
O
O
O
O
O
0.56
1.04
1.19
1.89
2.00
1
2
3
4
5
O
O
O
O
O
90
1
2
3
4
5
95
Type
50
1
2
3
O
O
O
56
1
2
3
63
71
100
No. of grooves z
Face width b2 (mm)
58
Distance
through hub
l
(mm)
Distance
through hub
l
(mm)
No.
of
grooves
85
Finished
bore
dmax
(mm)
Finished
bore
dmax
(mm)
Datum
diameter
dd
(mm)
for
Weight
( kg)
section AX/X13
for
No.
of
grooves
Type
Weight
( kg)
dd + 4 mm
section XPA
20
35
50
65
80
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: ush one side
Material: GG 20 DIN 1691
Standard Range
optibelt KS V-Grooved Pulleys for Plain Boring
Grooves According to BS 3790/DIN 2211
Section SPA/A/13
Datum
diameter
dd
(mm)
No.
of
grooves
Weight
( kg)
Type
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
180
1
2
3
4
5
x
x
x
x
x
2.02
3.15
3.60
4.65
6.13
38
42
42
48
48
36
49
42
60
70
315
1
2
3
4
5
x
x
x
x
x
4.78
6.60
8.75
11.80
12.50
48
48
55
55
60
44
53
47
60
70
190
1
2
3
4
5
x
x
x
x
x
2.02
3.20
4.00
5.24
6.31
38
42
42
48
48
36
49
42
60
70
355
1
2
3
4
5
x
x
x
x
x
5.50
7.70
9.55
11.80
12.85
48
55
55
55
60
44
53
47
60
70
200
1
2
3
4
5
x
x
x
x
x
2.40
2.85
4.21
4.95
6.45
38
42
48
55
60
36
49
42
60
70
400
1
2
3
4
5
x
x
x
x
x
6.85
8.80
10.95
12.40
15.90
50
55
60
60
60
50
53
47
67
82
212
1
2
3
4
5
x
x
x
x
x
2.70
3.40
4.40
5.68
6.85
40
42
42
42
42
36
49
42
60
70
450
1
2
3
4
5
x
x
x
x
x
7.50
9.40
12.15
14.20
18.30
55
55
60
65
65
50
53
47
67
82
225
1
2
3
4
5
x
x
x
x
x
2.75
3.87
4.60
6.50
7.25
40
42
42
42
42
36
49
42
60
70
500
1
2
3
4
5
x
x
x
x
x
10.50
10.70
13.45
16.25
22.80
55
55
60
65
65
50
55
60
67
82
236
1
2
3
4
5
x
x
x
x
x
3.30
4.10
4.90
6.20
7.50
38
42
48
55
55
36
49
42
60
70
560
1
2
3
4
5
x
x
x
x
x
14.00
13.10
15.60
19.40
24.50
55
55
60
65
65
60
60
74
67
82
250
1
2
3
4
5
x
x
x
x
x
3.40
4.32
5.30
7.00
7.85
42
48
48
55
60
36
49
42
60
70
280
1
2
3
4
5
x
x
x
x
x
3.90
5.35
6.50
8.52
9.90
42
48
48
55
60
44
53
47
60
70
300
1
2
3
4
5
x
x
x
x
x
4.25
5.90
7.50
9.82
11.30
48
48
55
55
60
44
53
47
60
70
dd + 4 mm
No. of grooves z
Face width b2 (mm)
dd + 4 mm
20
35
50
67
82
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: ush one side
Material: GG 20 DIN 1691
59
Standard Range
optibelt KS V-Grooved Pulleys for Plain Boring
Grooves According to BS 3790/DIN 2211
Section SPB/B/17
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
0.61
1.00
1.00
20
20
22
41
60
62
O
O
O
0.76
1.20
1.20
20
20
22
41
60
62
1
2
3
O
O
O
0.79
1.31
1.60
22
22
22
41
60
55
75
1
2
3
O
O
O
0.82
1.42
1.85
25
25
25
41
60
62
80
1
2
3
4
5
O
O
O
O
O
1.03
1.65
2.05
2.40
2.73
28
28
28
28
28
41
60
55
70
80
85
1
2
3
4
5
O
O
O
O
O
1.10
1.70
2.15
2.70
3.00
30
30
30
30
30
41
60
55
70
75
90
1
2
3
4
5
O
O
O
O
O
1.17
1.80
2.30
3.05
3.30
32
38
38
38
38
41
60
55
70
75
95
1
2
3
4
5
O
O
O
O
O
1.25
2.00
2.50
2.90
3.60
35
38
38
38
38
41
60
67
70
75
1
2
3
4
5
6
O
O
O
O
O
O
1.32
2.11
2.85
3.81
4.45
5.20
32
38
38
38
38
38
41
60
55
70
75
124
1
2
3
4
5
6
O
O
O
O
O
O
1.45
2.00
3.00
4.30
5.10
6.00
28
28
30
30
32
32
41
60
55
70
75
124
Datum
diameter
dd
(mm)
No.
of
grooves
Type
56
1
2
3
O
O
O
63
1
2
3
71
100
106
No. of grooves z
Face width b2 (mm)
60
for
Weight
( kg)
section BX/X17
for
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
112
1
2
3
4
5
6
O
O
O
O
O
O
1.53
2.35
3.10
4.75
5.61
6.15
32
38
38
42
42
42
41
60
55
67
75
85
118
1
2
3
4
5
6
O
O
O
O
O
O
1.57
2.43
3.20
6.20
7.20
6.60
32
38
42
42
42
42
41
60
55
70
75
85
125
1
2
3
4
5
6
O
O
O
O
O
O
1.66
2.55
3.28
4.74
8.60
8.00
32
38
42
42
42
48
41
60
55
70
75
85
132
1
2
3
4
5
6
O
O
O
O
O
O
1.88
2.63
3.49
6.30
9.40
8.50
30
30
42
42
42
42
41
60
55
70
75
85
140
1
2
3
4
5
6
O
O
O
O
O
O
2.10
2.90
3.90
6.92
7.58
11.40
32
38
42
42
48
48
41
60
55
70
75
85
150
1
2
3
4
5
6
O
O
O
O
O
O
2.43
3.24
4.28
6.76
8.43
12.10
32
38
42
42
48
48
43
48
60
70
75
85
160
1
2
3
4
5
6
x
x
x
O
O
O
2.50
3.32
4.60
7.01
9.35
12.85
38
42
48
48
48
55
43
48
60
70
75
85
170
1
2
3
4
5
6
x
x
x
O
O
O
2.85
3.44
4.89
7.20
8.90
13.10
42
42
42
48
48
48
43
48
60
70
75
85
dd + 5,5 mm
section XPB
25
44
63
86
105
124
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: ush one side
Material: GG 20 DIN 1691
Standard Range
optibelt KS V-Grooved Pulleys for Plain Boring
Grooves According to BS 3790/DIN 2211
Section SPB/B/17
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
180
1
2
3
4
5
6
x
x
x
x
O
O
3.10
3.90
5.28
7.42
9.05
10.80
38
42
48
48
55
60
43
48
60
70
75
85
315
1
2
3
4
5
6
x
x
x
x
x
x
6.40
8.22
12.90
13.00
17.60
20.60
48
55
55
60
65
75
49
55
67
80
80
90
190
1
2
3
4
5
6
x
x
x
x
O
O
3.19
4.22
5.49
7.69
9.22
11.95
42
42
42
48
50
55
43
48
60
70
75
85
355
1
2
3
4
5
6
x
x
x
x
x
x
7.00
9.70
13.40
18.25
18.75
19.75
48
55
55
60
65
75
49
55
67
80
75
90
200
1
2
3
4
5
6
x
x
x
x
O
O
3.40
4.45
5.85
7.98
9.50
12.20
38
42
48
50
55
60
43
48
60
60
80
90
400
1
2
3
4
5
6
x
x
x
x
x
x
8.46
10.00
14.30
18.50
22.50
28.00
50
55
60
65
70
75
49
55
67
80
85
90
212
1
2
3
4
5
6
x
x
x
x
x
O
3.75
4.66
6.15
7.70
10.30
13.51
42
42
48
50
50
55
43
48
60
70
80
90
450
1
2
3
4
5
6
x
x
x
x
x
x
9.86
10.87
15.05
20.50
26.00
28.90
50
55
60
65
70
75
55
55
67
80
80
90
225
1
2
3
4
5
6
x
x
x
x
O
O
4.00
5.40
6.90
8.64
11.72
14.75
42
42
48
55
50
55
43
48
60
70
90
90
500
1
2
3
4
5
6
x
x
x
x
x
x
10.70
13.70
15.20
21.30
30.00
33.80
50
60
65
70
75
80
55
59
67
80
80
90
250
1
2
3
4
5
6
x
x
x
x
x
x
4.20
6.10
8.60
9.70
13.20
17.00
42
48
55
60
65
65
43
55
60
70
80
90
560
2
3
4
5
6
x
x
x
x
x
15.00
24.20
26.20
34.40
39.00
60
65
70
75
80
55
67
80
80
90
280
1
2
3
4
5
6
x
x
x
x
x
x
5.70
7.04
9.67
11.52
15.50
18.00
48
48
55
60
65
65
49
55
60
70
80
90
630
2
3
4
5
6
x
x
x
x
x
20.20
27.00
30.80
37.20
44.00
60
65
75
80
90
80
80
86
90
100
300
1
2
3
4
5
6
x
x
x
x
x
x
5.90
7.50
10.50
12.40
15.40
18.25
48
48
55
60
65
70
49
55
67
80
80
90
dd + 5,5 mm
No. of grooves z
Face width b2 (mm)
25
44
63
86
105
124
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: ush one side
Material: GG 20 DIN 1691
61
Standard Range
optibelt KS V-Grooved Pulleys for Plain Boring
Grooves According to BS 3790/DIN 2211
Section SPC/C/22
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
Datum
diameter
dd
(mm)
180
1
2
3
4
5
6
O
O
O
O
O
O
4.20
7.20
10.40
10.50
18.00
23.70
40
50
55
55
60
65
54
64
90
95
100
115
200
1
2
3
4
5
6
O
O
O
O
O
O
4.80
7.80
10.60
11.20
15.40
27.00
40
50
55
60
65
70
54
64
90
95
100
125
1
2
3
4
5
6
x
x
x
x
x
x
5.50
7.80
10.60
13.10
16.70
35.00
48
52
52
55
60
60
54
64
90
95
100
115
250
1
2
3
4
5
6
x
x
x
x
x
x
7.30
8.80
11.10
15.30
19.00
23.70
52
52
65
70
75
60
54
64
90
95
100
115
280
1
2
3
4
5
x
x
x
x
x
8.70
10.90
15.60
17.50
20.50
52
55
70
75
75
54
64
90
95
100
315
1
2
3
4
5
6
x
x
x
x
x
x
9.10
13.00
17.10
20.00
24.70
31.20
52
55
70
75
80
85
54
74
90
95
100
115
335
2
3
4
5
6
x
x
x
x
x
14.00
18.30
22.40
28.30
34.40
55
55
60
65
75
74
90
95
100
115
355
2
3
4
5
6
x
x
x
x
x
15.20
19.20
25.80
32.00
36.20
60
70
70
75
75
74
90
95
100
115
400
3
4
5
x
x
x
20.60
28.00
32.00
70
70
75
90
105
100
Datum
diameter
dd
(mm)
225
No. of grooves z
Face width b2 (mm)
62
for
section CX/X22
for
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
450
2
3
4
5
6
x
x
x
x
x
21.10
26.30
31.10
42.20
48.50
70
75
75
80
80
80
90
105
110
120
500
3
4
5
6
x
x
x
x
28.40
34.10
48.20
52.50
75
75
80
80
90
105
110
120
560
3
4
5
6
x
x
x
x
31.10
39.00
54.10
61.50
75
75
85
85
90
105
110
120
630
3
4
5
6
x
x
x
x
38.50
48.10
62.20
73.20
80
80
85
85
90
105
110
120
section XPC
38
64
90
116
142
168
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: ush one side
Material: GG 20 DIN 1691
Standard Range
optibelt RE Variable Speed Pulleys
D
(mm)
Finished
bore
dmax
(mm)
B
(mm)
R 083-1
83
40
26
R 093-1
93
45
R 108-1
108
R 121-1
Material: Al
Section
dd min
(mm)
dd max
(mm)
Variation
factor
Weight
( kg)
48
SPZ
Z/10
63
57
79
77
1.25
1.35
0.90
28
48
SPZ
SPA
Z/10
A/13
67
66
61
60
89
87
87
85
1.33
1.32
1.43
1.42
1.03
50
28
48
SPZ
SPA
Z/10
A/13
79
81
73
75
94
102
93
100
1.19
1.26
1.27
1.33
1.65
121
55
28
48
SPZ
SPA
Z/10
A/13
92
94
86
88
107
115
106
113
1.16
1.22
1.23
1.28
1.75
R 138-1
138
55
38
48
SPZ
SPA
SPB
Z/10
A/13
B/17
109
111
116
103
105
109
124
132
131
123
130
128
1.14
1.19
1.13
1.19
1.24
1.17
2.60
R 160-1
160
80
52
48
SPZ
SPA
SPB
Z/10
A/13
B/17
119
121
126
113
115
119
134
143
153
133
141
150
1.13
1.18
1.21
1.18
1.23
1.26
4.50
R 180-1
180
80
52
48
SPA
SPB
A/13
B/17
141
146
135
139
163
173
161
170
1.16
1.18
1.19
1.22
5.40
Designation
Al = Aluminium
63
Standard Range
optibelt RE Variable Speed Pulleys
D
(mm)
Finished
bore
dmax
(mm)
B
(mm)
R 083-2
83
40
26
R 093-2
93
45
R 108-2
108
R 121-2
Section
dd min
(mm)
dd max
(mm)
Variation
factor
Weight
( kg)
76
SPZ
Z/10
63
57
79
77
1.25
1.35
1.50
28
76
SPZ
SPA
Z/10
A/13
67
66
61
60
89
87
87
85
1.33
1.32
1.43
1.42
1.75
50
28
76
SPZ
SPA
Z/10
A/13
79
81
73
75
94
102
93
100
1.19
1.26
1.27
1.33
2.15
121
55
28
76
SPZ
SPA
Z/10
A/13
92
94
86
88
107
115
106
113
1.16
1.22
1.23
1.28
2.70
R 138-2
138
55
38
76
SPZ
SPA
SPB
Z/10
A/13
B/17
109
111
116
103
105
109
124
132
131
123
130
128
1.14
1.19
1.13
1.19
1.24
1.17
4.50
R 160-2
160
80
52
90
SPZ
SPA
SPB
Z/10
A/13
B/17
119
121
126
113
115
119
134
143
153
133
141
150
1.13
1.18
1.21
1.18
1.23
1.26
7.50
R 180-2
180
80
52
90
SPA
SPB
A/13
B/17
141
146
135
139
163
173
161
170
1.16
1.18
1.19
1.22
9.20
Designation
64
Material: Al
Al = Aluminium
Standard Range
optibelt RE Variable Speed Pulleys
D
(mm)
Finished
bore
dmax
(mm)
B
(mm)
TB-R 092-1
92
46
25
31
TB-R 108-1
108
50
28
TB-R 120-1
120
55
TB-R 138-1
138
TB-R 159-1
TB-R 180-1
Designation
Material: GG
Weight
without
bush
( kg)
Taperbush
1.48
1.60
0.85
1008
93
102
92
100
97
1.24
1.34
1.35
1.43
1.11
1.20
1108
87
88
80
82
98
105
114
104
112
108
1.20
1.29
1.30
1.36
1.10
1.50
1108
SPZ
SPA
Z/10
A/13
B/17
105
106
98
100
116
123
132
122
130
126
1.17
1.24
1.24
1.30
1.09
2.20
1215
39
SPZ
SPA
Z/10
A/13
B/17
126
128
122
128
125
144
154
152
152
148
1.14
1.20
1.24
1.18
1.18
3.50
1615
45
SPZ
SPA
SPB
Z/10
A/13
B/17
133
134
137
128
128
132
151
160
173
151
158
170
1.14
1.19
1.26
1.17
1.23
1.29
4.20
1615
dd min
(mm)
dd max
(mm)
SPZ
Z/10
60
55
89
88
35
SPZ
SPA
Z/10
A/13
B/17
75
76
68
70
87
28
35
SPZ
SPA
Z/10
A/13
B/17
65
32
38
159
75
42
180
75
42
Profil
Taper bush
1008
1108
1215
1615
10-25
10-28
11-32
14-42
Variation
faktor
GG = cast iron
Rights to technical modication reserved
Bore diameter d2 see page 66
65
Standard Range
optibelt TB Taper Bushes
Taper bushes with metrical bore, grooves according to DIN 6885 Part 1
Taper bush
1008 1108 1210 1215 1310 1610 1615 2012 2517 3020 3030 3525 3535 4040 4545 5050
Bore
diameter d2
(mm)
10
11
12
14
16
18
19
20
22
24
25
5.7
10
11
12
14
16
18
19
20
22
24
25
28
11
12
14
16
18
19
20
22
24
25
28
30
32
5.7
20
11
12
14
16
18
19
20
22
24
25
28
30
32
20
14
16
18
19
20
22
24
25
28
30
32
35
14
16
18
19
20
22
24
25
28
30
32
35
38
40
42
20
20
14
16
18
19
20
22
24
25
28
30
32
35
38
40
42
20
14
16
18
19
20
22
24
25
28
30
32
35
38
40
42
45
48
50
16
18
19
20
22
24
25
28
30
32
35
38
40
42
45
48
50
55
60
25
28
30
32
35
38
40
42
45
48
50
55
60
65
70
75
31
49
92
35
38
40
42
45
48
50
55
60
65
70
75
35
38
40
42
45
48
50
55
60
65
70
75
80
85
90
35
38
40
42
45
48
50
55
60
65
70
75
80
85
90
40
42
45
48
50
55
60
65
70
75
80
85
90
95
100
55
60
65
70
75
80
85
90
95
100
105
110
70
75
80
85
90
95
100
105
110
115
120
125
Material: GG 20
92
115
115
172
195
275
22.3 22.3 25.4 38.1 25.4 25.4 38.1 31.8 44.5 50.8 76.2 63.5 88.9 101.6 114.3 127.0
0.12 0.16 0.28 0.39 0.32 0.41 0.60 0.75 1.06 2.50 3.75 3.90 5.13 7.68 12.70 15.17
Groove width
b (mm)
Groove depth
Bore diameter
t2 (mm)
d2 (mm)
Groove width
b (mm)
Groove depth
d2 (mm)
24
25
8
8
2.0
1.3
28
42
8
12
2.0
2.2
t2 (mm)
Taper bushes with inch bore, keyways according to British Standard BS 46 Part 1
Taper bush
1008 1108 1210 1215 1310 1610 1615 2012 2517 3020 3030 3525 3535 4040 4545 5050
Bore
diameter d2
(inch)
3/8*
3/8*
1/2
5/8
3/4
1/2
1/2
3/4
3/4
5/8
7/8
1
7/8
5/8*
1/2*
7/8
3/4*
5/8
3/4
7/8
1
11/8
11/4
11/8
1
11/8* 11/4
1/2
5/8*
5/8
7/8*
7/8
1*
11/8
11/4
13/8
3/4
11/8
11/4
13/8
11/2
15/8
1/2
5/8
3/4
7/8*
5/8*
3/4
7/8
1
1
11/8
11/8 11/4
11/4 13/8
13/8 11/2
11/2 15/8
15/8* 13/4
17/8
2
3/4
7/8
1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/8
21/4
23/8
21/2
11/4
13/8
11/2
15/8
13/4*
17/8
2
21/8*
21/4
23/8
21/2
25/8
23/4
27/8
3
11/4
13/8
11/2
15/8
13/4*
17/8
2
21/8*
21/4
23/8
21/2
25/8*
23/4*
27/8
3
11/2
15/8
13/4
17/8
2
1
2 /8
21/4
23/8
21/2
25/8
23/4
27/8
3
31/8
31/4
33/8
31/2
11/2
15/8
13/4
17/8
2
1
2 /8
21/4
23/8
21/2
25/8
23/4
27/8
3
31/8
31/4
33/8
31/2
13/4*
17/8*
2*
21/8*
21/4*
23/8*
21/2*
25/8*
23/4*
27/8*
3*
31/8*
31/4*
33/8*
31/2*
33/4*
4*
21/4* 3*
23/8* 31/4*
21/2* 31/2*
23/4* 33/4*
27/8* 4*
3* 41/4*
31/4* 41/2*
33/8* 43/4*
31/2* 5*
33/4*
4*
41/4*
41/2*
Material: GG 20
Tightening torque (Nm)
5.7
5.7
20
20
20
20
20
31
49
92
92
115
115
172
195
275
22.3 22.3 25.4 38.1 25.4 25.4 38.1 31.8 44.5 50.8 76.2 63.5 88.9 101.6 114.3 127.0
0.12 0.16 0.28 0.39 0.32 0.41 0.60 0.75 1.06 2.50 3.75 3.90 5.13 7.68 12.70 15.17
66
Drive Calculation
Abbreviations Used in Formulae
(mm)
(mm)
bd
= datum width
(mm)
b1
= top width
(mm)
c1
c2
= service factor
c3
LdSt
Ldth
ng
(min-1)
nk
(min-1)
n1
(min-1)
n2
(min-1)
(kW*)
PB
= design power
(kW*)
PN
(kW*)
Sa
= belt speed
ddg
(mm)
ddk
(mm)
dd1
(mm)
Ud
dd2
(mm)
(mm)
Ea
(mm)
(N)
fB
= ex rate
(s-1)
= drive ratio
= number of belts
2
= angle of belt drive = 90
= span length
(mm)
LiSt
(mm)
Lith
(mm)
(mm)
c4
(mm)
(N)
(N)
(m/s)
(mm)
(mm)
()
()
* 1 kW = 1 kNm/s
The terms pitch diameter (dw), pitch length (Lw) and pitch circumference (Uw) used previously have been changed
to datum diameter (dd), datum length (Ld) and datum circumference (Ud) in order to bring them into line with
current standard terminology.
anom
67
Drive Calculation
Optibelt Nominal Power Rating PN Arc of Contact Correction Factor c1
68
The factor c1 corrects the power rating PN, when the arc of contact
is smaller than 180, as the PN value was calculated on the arc of
contact = 180 on the smaller pulley.
Table 17
ddg ddk
anom
c1
0
0.05
0.10
0.15
0.20
180
177
174
171
168
1.00
1.00
1.00
1.00
0.99
0.25
0.30
0.35
0.40
0.45
165
162
160
156
153
0.99
0.99
0.99
0.99
0.98
0.50
0.55
0.60
0.65
0.70
150
147
144
141
139
0.98
0.98
0.98
0.97
0.97
0.75
0.80
0.85
0.90
0.95
136
133
130
126
123
0.97
0.96
0.96
0.96
0.95
1.00
1.05
1.10
1.15
1.20
119
115
112
109
106
0.94
0.94
0.93
0.93
0.92
1.25
1.30
1.35
1.40
1.45
103
100
96
92
88
0.91
0.91
0.90
0.88
0.87
1.50
1.55
1.60
84
80
77
0.86
0.84
0.83
Drive Calculation
Service Factor c2
The service factor c2 takes account of the daily operating time and
of the type of driver and driven machine. It applies exclusively to
two-pulley drives. Other arrangements such as drives with tension
and guide idlers have not been taken into consideration. Pages
115-117 provide the relevant basic design guidelines for drives
with more than two pulleys.
Adverse operating conditions (e.g. aggressive dust, particularly
high ambient temperatures or the effects of various media) have
not been taken into account. As it is practically impossible to cover
every conceivable combination of driver/driven machine/operating conditions in a summary that complies with the relevant standards, the service factors are approximate values.
Table 18
Types of Prime Movers
Service factor c2
for daily operation time of (hours)
up to 10
over 10 below 16
over 16
Service factor c2
for daily operation time of (hours)
up to 10
over 10 below 16
over 16
Light drives
Centrifugal pumps and compressors, belt
conveyors (lightweight materials), fans
and pumps up to 7.5 kW
1.1
1.1
1.2
1.1
1.2
1.3
1.1
1.2
1.3
1.2
1.3
1.4
1.2
1.3
1.4
1.4
1.5
1.6
1.3
1.4
1.5
1.5
1.6
1.8
Medium drives
Plate cutters, presses, chain and belt
conveyors (heavy materials), screen vibrators, generators and exciters, bakery
machinery, machine tools (lathes and
grinders), laundry machinery, printing
machines, fans and pumps over 7.5 kW
Heavy-duty drives
Crushing plants, piston compressors,
heavy-duty conveyors, directional throw
conveyors, push conveyors (screw, plate
belts, bucket and shovel conveyors), lifts,
brick presses, textile machinery, paper
machinery, piston pumps, dredger
pumps, saw mills, hammer mills
Very heavy duty drives
Heavy-duty mills, stone crushers, calenders, mixers, winches, cranes, dredgers,
heavy duty wood working machinery
69
Drive Calculation
Length Factor c3 for optibelt Wedge Belts and Kraftbands
The length factor c3 takes into account the ex rate of the belt based
on the reference length for the particular belt section.
c3 > 1,0
c3 = 1,0
c3 < 1,0
Table 19
Section SPZ, XPZ
Datum length
(mm)
70
c3
Datum length
(mm)
c3
Datum length
(mm)
c3
630
670
710
750
800
0.83
0.84
0.85
0.86
0.87
800
850
900
950
1000
0.81
0.82
0.83
0.84
0.85
1250
1320
1400
1500
1600
0.83
0.84
0.85
0.86
0.87
850
900
950
1000
1060
0.88
0 89
0.90
0.91
0.92
1060
1120
1180
1250
1320
0.86
0.86
0.87
0.88
0.89
1700
1800
1900
2000
2120
0.88
0.89
0.90
0.91
0.92
1120
1180
1250
1320
1400
0.93
0.94
0.95
0.96
0.98
1400
1500
1600
1700
1800
0.90
0.91
0.92
0.93
0.94
2240
2360
2500
2650
2800
0.93
0.93
0.94
0.95
0.96
1500
1600
1700
1800
1900
0.99
1.00
1.01
1.02
1.03
1900
2000
2120
2240
2360
0.95
0.96
0.97
0.98
0.99
3000
3150
3350
3550
3750
0.97
0.98
0.99
1.00
1.01
2000
2120
2240
2360
2500
1.04
1.05
1.06
1.07
1.08
2500
2650
2800
3000
3150
1.00
1.01
1.02
1.03
1.04
4000
4250
4500
4700
5000
1.02
1.03
1.04
1.04
1.05
2650
2800
3000
3150
3350
1.09
1.10
1.11
1.12
1.13
3350
3550
3750
4000
4250
1.05
1.06
1.07
1.08
1.09
5300
5600
6000
6300
6700
1.06
1.07
1.08
1.09
1.10
3550
3750
4000
4250
4500
1.15
1.16
1.17
1.18
1.19
4500
4750
5000
5300
5600
1.10
1.11
1.12
1.13
1.14
7100
7500
8000
8500
9000
1.11
1.12
1.13
1.14
1.15
6000
1.15
9500
10000
1.16
1.17
c3
2000
2120
2240
2360
2500
2650
2800
3000
3150
3350
0.85
0.86
0.86
0.87
0.88
0.89
0.90
0.91
0.91
0.92
3550
3750
4000
4250
4500
0.93
0.94
0.95
0 96
0.97
4750
5000
5300
5600
6000
0.98
0.98
0.99
1.00
1.01
6300
6700
7100
7500
8000
1.02
1.03
1.04
1.04
1.05
8500
9000
9500
10000
10600
1.06
1.07
1.08
1.09
1.09
11200
11800
12500
13200
14000
1.10
1.11
1.12
1.13
1.14
15000
1.15
Drive Calculation
Length Factor c3 for optibelt Wedge Belts and Kraftbands
Table 20
Section 3V/9N, 3VX/9NX
3V/9J, 3VX/9JX
Belt
designation
Outside length
(mm)
c3
Section 8V/25N
8V/25J
Outside length
(mm)
c3
Belt
designation
Outside length
(mm)
c3
3V
3V
3V
3V
3V
265
280
300
315
335
673
711
762
800
851
0.84
0.85
0.86
0.87
0.88
5V
5V
5V
5V
5V
500
530
560
600
630
1270
1346
1422
1524
1600
0.84
0.85
0.85
0.87
0.87
8V 1000
8V 1060
8V 1120
8V 1180
8V 1250
2540
2692
2845
2997
3175
0.87
0.87
0 88
0.89
0.90
3V
3V
3V
3V
3V
355
375
400
425
450
902
952
1016
1079
1143
0.90
0.91
0.92
0.93
0.94
5V
5V
5V
5V
5V
670
710
750
800
850
1702
1803
1905
2032
2159
0.88
0.89
0.90
0.91
0.92
8V 1320
8V 1400
8V 1500
8V 1600
8V 1700
3353
3556
3810
4064
4318
0.91
0.92
0.93
0.93
0.94
3V
3V
3V
3V
3V
475
500
530
560
600
1206
1270
1346
1422
1524
0.95
0.96
0.97
0.98
0.99
5V 900
5V 950
5V 1000
5V 1060
5V 1120
2286
2413
2540
2692
2845
0.93
0.94
0.95
0.96
0.96
8V 1800
8V 1900
8V 2000
8V 2120
8V 2240
4572
4826
5080
5385
5690
0.95
0.96
0.97
0.98
0.98
3V
3V
3V
3V
3V
630
670
710
750
800
1600
1702
1803
1905
2032
1.00
1.01
1.02
1.03
1.04
5V 1180
5V 1250
5V 1320
5V 1400
5V 1500
2997
3175
3353
3556
3810
0.97
0.98
0.99
1.00
1.01
8V 2360
8V 2500
8V 2650
8V 2800
8V 3000
5994
6350
6731
7112
7620
0.99
1.00
1.01
1.02
1.03
3V 850
3V 900
3V 950
3V 1000
3V 1060
2159
2286
2413
2540
2692
1.05
1.07
1.07
1.08
1.09
5V 1600
5V 1700
5V 1800
5V 1900
5V 2000
4064
4318
4572
4826
5080
1.02
1.03
1.04
1.05
1.06
8V 3150
8V 3350
8V 3550
8V 3750
8V 4000
8001
8509
9017
9525
10160
1.03
1.04
1.05
1.06
1.07
3V 1120
3V 1180
3V 1250
3V 1320
3V 1400
2845
2997
3175
3353
3556
1.11
1.11
1.13
1.14
1.15
5V 2120
5V 2240
5V 2360
5V 2500
5V 2650
5385
5690
5994
6350
6731
1.07
1.07
1.08
1.09
1.10
8V 4250
8V 4500
8V 4750
8V 5000
8V 5300
10795
11430
12065
12700
13462
1.08
1.09
1.09
1.10
1.11
3V 1500
3V 1600
3V 1700
3V 1800
3V 1900
3810
4064
4318
4572
4826
1.16
1.17
1.18
1.19
1.20
5V 2800
5V 3000
5V 3150
5V 3350
5V 3550
7112
7620
8001
8509
9017
1.11
1.12
1.13
1.14
1.15
8V 5600
8V 6000
8V 6300
14224
15240
16002
1.12
1.13
1.13
3V 2000
5080
1.21
5V 3750
5V 4000
9525
10160
1.16
1.17
71
Drive Calculation
Length Factor c3 for optibelt Classical Belts and Kraftbands
Table 21
Section 5*
Datum
length
(mm)
c3
172
202
248
277
292
312
327
334
347
364
387
418
437
487
512
524
542
566
612
0.87
0.91
0.95
0.97
0.99
1.00
1.01
1.01
1.02
1.03
1.05
1.06
1.07
1.10
1.11
1.11
1.12
1.13
1.15
Section Y/6*
Datum
length
(mm)
c3
280
295
315
330
350
370
390
415
440
465
490
515
555
615
725
765
865
0.97
0.99
1.00
1.01
1.02
1.04
1.05
1.06
1 07
1.09
1.10
1.11
1.13
1.15
1.19
1.20
1.23
Section 8
Datum
length
(mm)
299*
334*
374*
419*
444*
469*
494*
549*
579*
594*
619*
649*
689*
729*
769*
819*
869
894
919
969
1019
1139
1269
1339
1419
1519
0.80
0.81
0.83
0.85
0.86
0.87
0.88
0.89
0.90
0.92
0.93
0.94
0.95
0.96
0.99
1.00
1.01
1.03
1.04
1.05
5058
5358
5658
6058
6358
6758
7158
7558
8058
9058
10058
1.06
1.07
1.09
1.10
1.11
1.13
1.14
1.15
1.17
1.19
1.22
c3
0.86
0.88
0.91
0.93
0.94
0.95
0.97
0.99
1.00
1.01
1.01
1.02
1.04
1.05
1.06
1.08
1.09
1.10
1.10
1.11
1.13
1.15
1.18
1.19
1.20
1.22
422*
447*
472*
497*
522*
552*
582*
622
652
692
732
822
847
887
922
947
997
1022
1082
1142
1172
1202
1272
1342
1422
1522
1622
c3
0.86
0.87
0.88
0.89
0.90
0.92
0.93
0.94
0.95
0.96
0.98
1.00
1.01
1.02
1.02
1.03
1.04
1.05
1.06
1.07
1.08
1.08
1.10
1.11
1.12
1.14
1.15
Datum
length
(mm)
c3
660
740
780
830
880
930
980
1030
1090
1150
1210
1280
1350
1430
1530
1630
1730
1830
1930
2030
2150
2270
2390
2530
2680
2830
3030
3180
3380
3780
4030
4530
5030
0.80
0.82
0.83
0.85
0.86
0.87
0.88
0.89
0.90
0.91
0.92
0.94
0.95
0.96
0.97
0.99
1.00
1.01
1.02
1.03
1.05
1.06
1.07
1.08
1.10
1.11
1.12
1.14
1.15
1.17
1.19
1.22
1.24
Section 25
1311
1461
1561
1661
1761
1861
1961
2061
2181
2301
2421
2561
2711
2861
3061
3211
3411
3611
3811
4061
0.75
0.77
0.78
0.79
0.80
0.81
0.82
0.83
0.85
0.86
0.87
0.88
0.89
0.90
0.92
0.93
0.94
0.95
0.96
0.98
4311
4561
4811
5061
5361
5661
6061
6361
6761
7161
7561
8061
9061
10061
11261
12561
Datum
length
(mm)
c3
Datum
length
(mm)
c3
900
990
1040
1100
1140
1220
1290
1360
1440
1540
1640
1740
1840
1940
2040
2160
2280
2400
2590
2690
2840
3040
3190
3390
3590
3790
4040
4290
4540
4790
5040
5340
5640
6040
6340
0.81
0.83
0.84
0.85
0.85
0.87
0.88
0.89
0.90
0.92
0.93
0.94
0.95
0.97
0.98
0.99
1.00
1.01
1.03
1.04
1.05
1.06
1.07
1.09
1.10
1.11
1.13
1.14
1.15
1.17
1.18
1.19
1.20
1.22
1.23
948
998
1048
1168
1228
1298
1368
1448
1548
1648
1848
2048
2168
2298
2408
2548
2698
2848
3048
3198
3398
3598
3798
4048
4298
4548
4798
5048
5348
5648
6048
6348
7148
8048
0.75
0.76
0.77
0.79
0.80
0.81
0.82
0.83
0.85
0.86
0.88
0.91
0.92
0.93
0.94
0.95
0.96
0.98
0.99
1.00
1.01
1.03
1.04
1.05
1.06
1.08
1.09
1.10
1.11
1.13
1.14
1.15
1.18
1.21
Section D/32
0.99
1.00
1.01
1.02
1.04
1.05
1.06
1.07
1.09
1.10
1.11
1.13
1.15
1.18
1.20
1.23
3225
3425
3625
3825
4075
4325
4575
4825
5075
5375
5675
6075
6375
6775
7175
7575
8075
8575
9075
9575
0.86
0.87
0.88
0.89
0.91
0.92
0.93
0.94
0.95
0.96
0.98
0.99
1.00
1.01
1.03
1.04
1.05
1.06
1.08
1.09
Section 20
10075
10675
11275
11875
12575
13275
14075
15075
16075
Section E/40
1.10
1.11
1.13
1.14
1.15
1.16
1.18
1.19
1.21
4830
5080
5380
5680
6080
6380
6780
7180
7580
8080
8580
9080
9580
10080
10680
11280
11880
12580
13280
14080
15080
16080
0.92
0.93
0.94
0.95
0.96
0.97
0.99
1.00
1.01
1.03
1.04
1.05
1.06
1.07
1.09
1.10
1.11
1.12
1.14
1.15
1.17
1.18
Drive Calculation
Guidelines for Selecting V-Belt and Kraftband Sections
vmax 55 m/s*,
vmax 30 m/s.
* Important note: where V > 42 m/s please consult our Applications Engineering Department
Drive Calculation
Guidelines for Selecting V-Belt and Kraftband Sections
m
m
10
0
to
dk
to
dk
dk
to
63
to
dk
40
25
m
to
dk
dk
to
25
18
dk
to
18
74
Drive Calculation
Guidelines for Selecting V-Belt and Kraftband Sections
d dk
to
00
mm
d dk
to
80
mm
d dk
to
0
18
mm
dk
to
50
mm
d dk
to
0
25
mm
d dk
to
0
40
mm
75
Drive Calculation
Minimum Allowance x/y for Adjusting Drive Centre Distance anom
Minimum
allowance x (mm)
for
tensioning
SPA, XPA
SPB, XPB
SPC, XPC
670
10
10
10
670 1 000
15
15
15
20
15
15
25
20
20
20
25
20
20
20
25
35
20
20
20
30
45
20
20
20
30
55
20
20
25
30
70
25
25
30
35
85
25
25
35
40
110
30
30
35
45
135
35
45
150
45
55
190
45
55
>
Outside length
(mm)
Minimum
allowance x (mm)
for
tensioning
5V/15N, 5VX/15NX
8V/25N
>
265
400
>
673 1 016
15
15
>
400
475
20
15
>
475
710
25
20
20
>
710
850
25
20
20
>
850 1 180
35
20
20
40
45
20
20
40
55
20
25
40
70
30
45
85
35
45
110
35
50
135
35
50
150
45
60
190
45
60
76
Drive Calculation
Minimum Allowance x/y for Adjusting Drive Centre Distance anom
Minimum
allowance x (mm)
for
tensioning
Y/6
20
C/22,
CX/X22
25
D/32
E/40
200
10
>
200
250
10
10
>
250
315
10
10
10
10
>
315
670
10
10
10
10
10
>
670 1 000
15
10
15
15
15
20
15
15
15
15
20
20
25
15
20
20
20
20
25
25
25
20
20
20
20
25
25
30
35
35
20
20
20
25
30
30
35
40
45
20
20
20
25
30
30
35
40
55
20
20
20
30
30
30
35
40
70
20
25
35
35
35
40
45
85
20
25
40
40
40
45
50
110
25
25
40
45
45
45
50
135
30
40
45
45
50
55
150
40
50
55
55
60
65
190
40
50
55
55
60
65
anom
77
Drive Calculation
Minimum Allowance x/y for Adjusting Drive Centre Distance anom
Outside length
(mm)
Minimum
allowance x (mm)
for
tensioning
8V/25J
SPC
475
710
1 206 1 803
25
35
40
>
710
850
25
35
40
>
850 1 180
35
35
40
80
45
35
40
80
80
55
40
45
85
85
70
45
50
85
85
85
50
55
95
95
110
50
55
95
95
135
60
95
95
150
70
105
105
190
85
120
120
Note: Datum lengths must be considered for kraftbands with sections SPZ, SPA, SPB and SPC.
For raw edge kraftbands, the same x/y values apply.
78
Minimum
allowance x (mm)
for
tensioning
B/HB
C/HC
D/HD
1 200 1 800
25
30
35
25
30
35
35
30
35
50
85
45
30
35
50
85
55
30
40
55
90
70
35
45
60
90
85
45
55
65
100
110
45
55
65
100
135
50
60
75
100
150
60
70
85
110
190
70
85
95
125
Drive Calculation
Formulae and Calculation Examples
Prime mover
Operating conditions
Driven machine
3-phase motor
P = 132 kW
n1 = 1485 rpm
Star delta start
Starting torque MA = 0.65 MN
Fan
P = 132 kW
n2 = 825 15 rpm
Start-up: under load
Type of loading: continuous
Note: The calculation takes into consideration the standard specied by ISO for datum diameter dd (supersedes pitch diameter dw) and
datum length Ld (supersedes pitch length Lw).
Formulae
Calculation example
Service factor
c2 from table 18 page 69
c2 = 1.3
Design Power
PB = P c2
SPB
Speed ratio
i=
n1
n2
dd2
dd1
i=
1485
825
= 1.8
dd2 = dd1 i
dd1 =
dd2
i
Drive Calculation
Formulae and Calculation Examples
Formulae
Calculation example
n2 vorh =
dd2
ivorh
dd1
n1
n2 vorh
ivorh
500
= 1.79
280
1485
=
= 830 min-1
1.79
=
required:
825 15 rpm
(requirement met)
a > 0.7
(ddg + ddk)
a<2
(ddg + ddk)
a = 1400 mm selected
(ddg ddk)2
4a
actual:
2202
4 1400
4033 mm
Ldth = 2 a sin
(ddg + ddk) +
180
(ddg ddk)
LdSt = 4000 mm
LdSt
anom 1400
4033 4000
2
1383.5 mm
(ddg + ddk)
2
+
4
(ddg ddk)2
8
x 45 mm / y 20 mm
v =
fb =
80
ddk nk
19100
2 1000 v
LdSt
(vmax 55 m/s)
v =
fb =
280 1485
19100
= 21.76 m/s
2 1000 21.76
4000
= 10.88 s-1
Drive Calculation
Formulae and Calculation Examples
Formulae
Calculation example
500 280
anom
approximate and c1 from table 17 page 68
1383.5
170
actual: cos
ddg ddk
c1 = 1.0
2 anom
= 0.16
linearly interpolated
Length factor
c3 from table 19 page 70
c3 = 1.02
PN for
ddk = 280 mm
i
= 1.79
nk = 1485 min-1
section SPB
from table 29, page 85
Number of belts
z=
P c2
z=
PN c1 c3
132 1.3
21.87 1.0 1.02
= 7.69
Suggested:
8 Optibelt SK wedge belts SPB 4000 Ld S=C plus
Section SPB:
Minimum static tension per belt
(multiply T by 1.3 at initial installation)
T
+ k v2
z
Sa 2 T sin
2
initial installation:
T = 593 N 1.3 = 771 N
Belt deection
Ea E L
100
E from diagram 8 page 124
L = anom sin
2
Ea
2.7 1378
100
E 2.7 mm
37 mm
81
Drive Calculation
optibelt CAP Example
Deviation/Hints
Type of driver unit
Type of driven unit
Calculation power
Drive power
Torque at driver pulley
Driver speed
Required driven speed
Datum diameter pulley 1
Datum diameter pulley 2
Datum length
Actual centres
Actual drive ratio
Adjustment required for belt tting
Adjustment required for belt tensioning
:
:
PB:
P:
M:
n1:
n2:
dd1:
dd2:
Ld:
a:
i:
y:
x:
Electric motor
Mill (hammer)
416.00 kW
260.00 kW
1399 Nm
1775 1/min
888 1/min
400.00 mm
800.00 mm
6300 mm
2198.40 mm
2.00
35.00 mm
70.00 mm
c2:
v:
fB:
PN:
c1:
c3:
:
b2:
l:
z1:
7.93
276.87 kg
Sast:
Samin:
Sadyn:
25519 N
19630 N
11752 N
1.61
37.17
11.80
51.84
0.99
1.02
169.60
212.50
2189.30
Tensioning recommendations
proposed c2 = 1.60
1. OPTIKRIK II + III
2. Load/deection tension gauge
3. Length additional value per 1000 mm belt length
4. Optibelt TT 3/TT mini Tension Tester
82
m/s
1/s
kW
-1 1/min
****** mm
0.0 %
mm
mm
proposed c2 = 1.60
Initial installation
new belts
Re-tension
existing belts
1602 N
1232 N
125 N
125 N
Deection:
41 mm
51 mm
6.3 mm
4.3 mm
Frequency:
14.9 1/s
12.6 1/s
Power Ratings
optibelt SK section SPZ, 3V/9N, 3V/9J
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 27
nk
(min-1)
63
71
80
85
90
95
100
112
125
132
140
150
160
180
200
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5800
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
8200
8400
0.50
0.63
0.87
1.38
0.10
0.18
0.25
0.32
0.38
0.44
0.50
0.55
0.61
0.66
0.71
0.76
0.80
0.85
0.89
0.93
0.98
1.02
1.06
1.10
1.13
1.17
1.20
1.24
1.27
1.31
1.34
1.37
1.40
1.43
1.45
1.48
1.51
1.53
1.56
1.58
1.60
1.62
1.64
1.66
1.68
1.70
1.72
1.73
1.75
1.76
1.77
1.78
1.80
1.81
1.81
1.82
1.83
1.83
1.84
1.84
1.84
1.84
1.84
1.83
1.81
1.79
1.77
1.74
1.70
1.66
1.62
1.57
1.51
1.45
0.68
0.87
1.23
2.03
0.13
0.24
0.33
0.43
0.51
0.60
0.68
0.76
0.84
0.91
0.98
1.06
1.12
1.19
1.26
1.32
1.39
1.45
1.51
1.57
1.63
1.69
1.74
1.80
1.85
1.90
1.96
2.01
2.05
2.10
2.15
2.19
2.24
2.28
2.32
2.36
2.40
2.44
2.48
2.51
2.55
2.58
2.61
2.64
2.67
2.70
2.73
2.75
2.78
2.80
2.82
2.84
2.86
2.87
2.89
2.90
2.93
2.94
2.96
2.96
2.96
2.95
2.94
2.91
2.89
2.85
2.81
2.76
2.70
2.63
0.88
1.14
1.62
2.74
0.16
0.30
0.43
0.55
0.66
0.78
0.88
0.99
1.09
1.19
1.29
1.39
1.48
1.58
1.67
1.76
1.85
1.93
2.02
2.10
2.18
2.26
2.34
2.42
2.49
2.57
2.64
2.71
2.78
2.85
2.91
2.98
3.04
3.10
3.16
3.22
3.28
3.33
3.39
3.44
3.49
3.54
3.58
3.63
3.67
3.71
3.75
3.79
3.83
3.86
3.89
3.93
3.95
3.98
4.01
4.03
4.07
4.10
4.12
4.13
4.14
4.14
4.12
4.10
4.07
4.02
3.97
3.91
3.83
3.75
1.00
1.29
1.84
3.13
0.18
0.34
0.48
0.62
0.75
0.87
1.00
1.12
1.24
1.35
1.46
1.57
1.68
1.79
1.89
2.00
2.10
2.20
2.29
2.39
2.48
2.58
2.67
2.75
2.84
2.93
3.01
3.09
3.17
3.25
3.33
3.40
3.48
3.55
3.62
3.68
3.75
3.81
3.88
3.94
4.00
4.05
4.11
4.16
4.21
4.26
4.30
4.35
4.39
4.43
4.47
4.50
4.53
4.56
4.59
4.62
4.66
4.70
4.72
4.74
4.74
4.74
4.72
4.69
4.65
4.60
4.53
4.46
4.37
4.27
1.11
1.44
2.06
3.52
0.20
0.37
0.53
0.68
0.83
0.97
1.11
1.24
1.38
1.51
1.63
1.76
1.88
2.00
2.12
2.23
2.35
2.46
2.57
2.68
2.78
2.89
2.99
3.09
3.19
3.28
3.38
3.47
3.56
3.65
3.74
3.82
3.91
3.99
4.06
4.14
4.22
4.29
4.36
4.43
4.49
4.55
4.62
4.67
4.73
4.78
4.84
4.88
4.93
4.97
5.02
5.05
5.09
5.12
5.16
5.18
5.23
5.27
5.29
5.30
5.30
5.29
5.27
5.23
5.18
5.11
5.03
4.94
4.83
4.70
1.22
1.59
2.27
3.90
0.22
0.41
0.58
0.75
0.91
1.07
1.22
1.37
1.52
1.66
1.80
1.94
2.07
2.21
2.34
2.47
2.59
2.72
2.84
2.96
3.08
3.20
3.31
3.42
3.53
3.64
3.74
3.85
3.95
4.05
4.14
4.24
4.33
4.42
4.50
4.59
4.67
4.75
4.83
4.90
4.97
5.04
5.11
5.18
5.24
5.30
5.35
5.40
5.45
5.50
5.55
5.59
5.63
5.66
5.69
5.72
5.77
5.80
5.82
5.83
5.82
5.80
5.76
5.71
5.64
5.56
5.46
5.34
5.21
5.05
1.33
1.74
2.49
4.27
0.24
0.44
0.63
0.81
0.99
1.16
1.33
1.50
1.66
1.81
1.97
2.12
2.27
2.42
2.56
2.70
2.84
2.98
3.11
3.24
3.37
3.50
3.63
3.75
3.87
3.99
4.10
4.22
4.33
4.43
4.54
4.64
4.74
4.84
4.94
5.03
5.12
5.20
5.29
5.37
5.45
5.52
5.59
5.66
5.73
5.79
5.85
5.91
5.96
6.01
6.05
6.10
6.14
6.17
6.20
6.23
6.28
6.31
6.32
6.32
6.30
6.26
6.21
6.14
6.05
5.94
5.82
5.67
5.50
5.32
1.60
2.08
3.00
5.15
0.28
0.52
0.75
0.97
1.19
1.39
1.60
1.79
1.99
2.18
2.37
2.55
2.73
2.91
3.08
3.26
3.42
3.59
3.75
3.91
4.07
4.22
4.38
4.52
4.67
4.81
4.95
5.08
5.22
5.34
5.47
5.59
5.71
5.83
5.94
6.04
6.15
6.25
6.35
6.44
6.53
6.61
6.69
6.77
6.84
6.91
6.97
7.03
7.08
7.13
7.18
7.22
7.26
7.29
7.31
7.33
7.36
7.36
7.35
7.31
7.25
7.16
7.05
6.92
6.76
6.58
6.37
6.13
1.88
2.46
3.54
6.07
0.33
0.61
0.88
1.14
1.39
1.64
1.88
2.12
2.35
2.57
2.79
3.01
3.23
3.44
3.64
3.85
4.05
4.24
4.43
4.62
4.81
4.99
5.17
5.34
5.51
5.67
5.83
5.99
6.14
6.29
6.43
6.57
6.71
6.84
6.96
7.08
7.20
7.31
7.41
7.51
7.61
7.70
7.78
7.86
7.93
8.00
8.06
8.11
8.16
8.20
8.24
8.27
8.29
8.31
8.32
8.32
8.30
8.26
8.19
8.08
7.94
7.78
7.58
7.34
2.03
2.66
3.83
6.55
0.35
0.66
0.95
1.23
1.51
1.77
2.03
2.29
2.54
2.78
3.02
3.26
3.49
3.72
3.94
4.16
4.38
4.59
4.80
5.00
5.20
5.39
5.58
5.77
5.95
6.12
6.30
6.46
6.63
6.78
6.93
7.08
7.22
7.36
7.49
7.61
7.73
7.85
7.95
8.06
8.15
8.24
8.32
8.40
8.47
8.53
8.59
8.63
8.68
8.71
8.74
8.76
8.77
8.77
8.77
8.75
8.71
8.62
8.51
8.35
2.20
2.89
4.16
7.08
0.38
0.71
1.03
1.34
1.63
1.92
2.20
2.48
2.75
3.02
3.28
3.54
3.79
4.04
4.28
4.52
4.75
4.98
5.20
5.42
5.64
5.84
6.05
6.25
6.44
6.63
6.81
6.99
7.16
7.33
7.49
7.64
7.79
7.93
8.07
8.20
8.32
8.43
8.54
8.64
8.73
8.82
8.90
8.97
9.03
9.09
9.13
9.17
9.20
9.22
9.24
9.24
9.23
9.22
9.20
9.16
9.07
8.93
8.76
8.54
2.42
3.17
4.56
7.72
0.42
0.78
1.13
1.47
1.79
2.11
2.42
2.72
3.02
3.31
3.60
3.88
4.16
4.43
4.69
4.95
5.21
5.46
5.70
5.94
6.17
6.40
6.62
6.84
7.04
7.25
7.44
7.63
7.81
7.99
8.16
8.32
8.47
8.61
8.75
8.88
9.00
9.12
9.22
9.32
9.41
9.48
9.55
9.61
9.66
9.70
9.73
9.76
9.77
9.77
9.75
9.73
9.70
9.66
9.60
9.53
9.37
2.63
3.45
4.96
8.34
0.45
0.85
1.23
1.59
1.95
2.29
2.63
2.96
3.29
3.61
3.92
4.22
4.52
4.82
5.11
5.39
5.66
5.93
6.19
6.45
6.70
6.94
7.18
7.41
7.63
7.84
8.05
8.25
8.44
8.62
8.79
8.95
9.11
9.26
9.39
9.52
9.64
9.75
9.85
9.93
10.01
10.08
10.13
10.17
10.21
10.23
10.24
10.23
10.22
10.19
10.15
10.09
10.03
9.95
3.05
4.00
5.75
9.50
0.52
0.98
1.42
1.85
2.26
2.66
3.05
3.44
3.81
4.18
4.54
4.90
5.24
5.58
5.91
6.23
6.55
6.85
7.15
7.44
7.72
7.99
8.25
8.50
8.74
8.97
9.19
9.40
9.60
9.79
9.96
10.12
10.28
10.41
10.54
10.65
10.75
10.83
10.90
10.96
11.00
11.03
11.04
11.03
11.01
10.97
10.92
10.85
10.76
10.65
3.47
4.54
6.51
10.55
0.59
1.12
1.62
2.10
2.57
3.02
3.47
3.91
4.33
4.75
5.16
5.56
5.95
6.32
6.69
7.05
7.40
7.74
8.07
8.38
8.68
8.98
9.26
9.52
9.77
10.01
10.24
10.45
10.64
10.82
10.99
11.14
11.27
11.39
11.48
11.56
11.62
11.67
11.69
11.70
11.68
11.64
11.59
11.51
11.41
SK
0.06
0.09
0.13
0.26
0.01
0.02
0.03
0.04
0.05
0.06
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.19
0.20
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.54
0.56
0.57
0.59
0.61
0.63
0.65
0.67
0.69
0.70
0.72
0.74
0.76
0.78
0.09
0.12
0.19
0.37
0.01
0.03
0.04
0.05
0.07
0.08
0.09
0.11
0.12
0.13
0.14
0.16
0.17
0.18
0.20
0.21
0.22
0.24
0.25
0.26
0.28
0.29
0.30
0.32
0.33
0.34
0.35
0.37
0.38
0.39
0.41
0.42
0.43
0.45
0.46
0.47
0.49
0.50
0.51
0.53
0.54
0.55
0.57
0.58
0.59
0.60
0.62
0.63
0.64
0.66
0.67
0.68
0.70
0.71
0.72
0.74
0.76
0.79
0.81
0.84
0.87
0.89
0.92
0.95
0.97
1.00
1.03
1.05
1.08
1.10
0.11
0.15
0.23
0.46
0.02
0.03
0.05
0.06
0.08
0.10
0.11
0.13
0.15
0.16
0.18
0.19
0.21
0.23
0.24
0.26
0.27
0.29
0.31
0.32
0.34
0.35
0.37
0.39
0.40
0.42
0.44
0.45
0.47
0.48
0.50
0.52
0.53
0.55
0.56
0.58
0.60
0.61
0.63
0.64
0.66
0.68
0.69
0.71
0.73
0.74
0.76
0.77
0.79
0.81
0.82
0.84
0.85
0.87
0.89
0.90
0.93
0.97
1.00
1.03
1.06
1.10
1.13
1.16
1.19
1.22
1.26
1.29
1.32
1.35
v (m/s)
Dynamically balanced (for details see DIN 2211)
Note: Pulley diameters shown are outside diameters for sections 3V/9N, 3V/9J.
Pulleys
83
Power Ratings
optibelt SK section SPA
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 28
nk
(min-1)
90
100
112
118
125
132
140
150
160
180
200
224
250
280
315
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
6100
6200
6300
6400
6500
6600
6700
6800
6900
7000
1.17
1.49
2.04
3.14
0.23
0.42
0.59
0.75
0.90
1.04
1.17
1.30
1.43
1.55
1.66
1.77
1.88
1.99
2.09
2.19
2.28
2.37
2.46
2.54
2.62
2.70
2.78
2.85
2.92
2.99
3.05
3.11
3.16
3.22
3.26
3.31
3.35
3.39
3.43
3.46
3.49
3.51
3.53
3.55
3.57
3.58
3.58
3.58
3.58
3.58
3.57
3.55
3.53
3.51
3.48
3.45
3.42
3.38
3.33
3.28
3.23
3.17
3.11
3.04
2.96
2.89
2.80
2.71
2.62
2.52
2.42
2.31
2.19
2.07
1.55
1.98
2.76
4.40
0.30
0.54
0.76
0.97
1.17
1.36
1.55
1.72
1.90
2.06
2.23
2.38
2.54
2.69
2.83
2.97
3.11
3.24
3.37
3.50
3.62
3.74
3.85
3.96
4.07
4.17
4.27
4.36
4.45
4.53
4.61
4.69
4.76
4.83
4.89
4.95
5.01
5.06
5.10
5.14
5.17
5.20
5.23
5.25
5.26
5.27
5.27
5.27
5.26
5.25
5.23
5.21
5.18
5.14
5.10
5.05
4.99
4.93
4.86
4.79
4.70
4.62
4.52
4.42
4.31
4.19
4.07
3.94
3.80
3.66
1.99
2.57
3.62
5.88
0.37
0.68
0.96
1.24
1.50
1.75
1.99
2.23
2.45
2.68
2.90
3.11
3.31
3.52
3.71
3.91
4.09
4.27
4.45
4.62
4.79
4.95
5.11
5.26
5.41
5.55
5.69
5.82
5.94
6.06
6.18
6.29
6.39
6.49
6.58
6.66
6.74
6.81
6.88
6.94
6.99
7.04
7.08
7.11
7.13
7.15
7.16
7.16
7.16
7.15
7.13
7.10
7.06
7.02
6.96
6.90
6.83
6.75
6.66
6.57
6.46
6.34
6.22
6.09
5.94
5.79
5.62
5.45
5.27
5.07
2.21
2.86
4.04
6.60
0.40
0.75
1.07
1.37
1.66
1.94
2.21
2.47
2.73
2.98
3.23
3.47
3.70
3.93
4.15
4.37
4.58
4.78
4.98
5.18
5.37
5.55
5.73
5.90
6.07
6.23
6.38
6.53
6.67
6.81
6.94
7.06
7.18
7.29
7.39
7.48
7.57
7.65
7.73
7.79
7.85
7.90
7.95
7.98
8.01
8.03
8.04
8.04
8.03
8.01
7.99
7.95
7.91
7.85
7.79
7.71
7.63
7.54
7.43
7.32
7.19
7.06
6.91
6.75
6.58
6.40
6.21
6.01
5.79
5.56
2.47
3.20
4.53
7.43
0.45
0.83
1.18
1.52
1.85
2.16
2.47
2.76
3.05
3.34
3.61
3.88
4.15
4.40
4.65
4.90
5.14
5.37
5.60
5.82
6.03
6.24
6.44
6.63
6.82
7.00
7.18
7.34
7.50
7.66
7.80
7.94
8.07
8.19
8.31
8.41
8.51
8.60
8.68
8.75
8.81
8.87
8.91
8.95
8.97
8.99
8.99
8.99
8.97
8.95
8.91
8.86
8.80
8.73
8.65
8.56
8.45
8.34
8.21
8.07
7.92
7.75
7.57
7.38
7.17
6.95
6.72
6.48
6.22
5.94
2.72
3.53
5.02
8.23
0.49
0.91
1.30
1.67
2.03
2.38
2.72
3.05
3.37
3.69
4.00
4.30
4.59
4.87
5.15
5.43
5.69
5.95
6.20
6.45
6.69
6.92
7.14
7.36
7.56
7.76
7.96
8.14
8.32
8.49
8.64
8.80
8.94
9.07
9.19
9.31
9.41
9.50
9.59
9.66
9.73
9.78
9.82
9.85
9.87
9.88
9.88
9.86
9.84
9.80
9.74
9.68
9.60
9.51
9.41
9.29
9.16
9.01
8.85
8.68
8.49
8.29
8.07
7.84
7.59
3.01
3.91
5.57
9.13
0.54
1.00
1.43
1.85
2.25
2.63
3.01
3.38
3.74
4.09
4.43
4.76
5.09
5.41
5.72
6.02
6.32
6.61
6.89
7.16
7.42
7.68
7.93
8.17
8.39
8.62
8.83
9.03
9.22
9.41
9.58
9.74
9.89
10.03
10.17
10.28
10.39
10.49
10.57
10.65
10.71
10.76
10.79
10.81
10.82
10.82
10.80
10.77
10.72
10.66
10.58
10.49
10.39
10.27
10.13
9.97
9.80
9.62
9.42
9.20
8.96
8.70
8.43
8.14
7.83
3.37
4.39
6.25
10.21
0.60
1.11
1.60
2.06
2.51
2.95
3.37
3.78
4.19
4.58
4.97
5.34
5.71
6.07
6.42
6.76
7.09
7.42
7.73
8.03
8.33
8.61
8.89
9.15
9.41
9.65
9.88
10.11
10.32
10.51
10.70
10.87
11.03
11.18
11.32
11.44
11.55
11.64
11.72
11.79
11.84
11.87
11.89
11.90
11.88
11.86
11.81
11.75
11.67
11.57
11.45
11.32
11.17
11.00
10.81
10.60
10.37
10.12
9.84
9.55
3.73
4.86
6.92
11.25
0.65
1.22
1.76
2.28
2.77
3.26
3.73
4.19
4.64
5.07
5.50
5.92
6.33
6.72
7.11
7.49
7.86
8.21
8.56
8.89
9.22
9.53
9.83
10.12
10.39
10.65
10.90
11.14
11.36
11.57
11.77
11.95
12.11
12.26
12.40
12.52
12.62
12.70
12.77
12.82
12.85
12.87
12.86
12.84
12.80
12.73
12.65
12.55
12.43
12.28
12.11
11.92
11.71
11.48
11.22
4.44
5.78
8.24
13.21
0.77
1.45
2.09
2.70
3.30
3.87
4.44
4.99
5.52
6.04
6.55
7.05
7.54
8.01
8.47
8.91
9.34
9.76
10.17
10.55
10.93
11.29
11.63
11.95
12.26
12.56
12.83
13.09
13.32
13.54
13.74
13.92
14.07
14.21
14.32
14.42
14.48
14.53
14.55
14.55
14.52
14.47
14.39
14.28
14.15
13.99
13.80
13.58
13.33
13.05
5.14
6.70
9.52
14.97
0.89
1.67
2.41
3.12
3.81
4.48
5.14
5.77
6.39
7.00
7.59
8.16
8.72
9.26
9.79
10.29
10.78
11.25
11.71
12.14
12.56
12.95
13.32
13.67
14.00
14.31
14.59
14.85
15.08
15.29
15.47
15.62
15.75
15.84
15.91
15.95
15.95
15.93
15.87
15.78
15.66
15.50
15.30
15.07
14.80
5.97
7.78
11.02
16.81
1.03
1.94
2.80
3.63
4.43
5.21
5.97
6.71
7.43
8.12
8.80
9.46
10.10
10.72
11.32
11.89
12.44
12.97
13.47
13.94
14.39
14.81
15.20
15.57
15.90
16.20
16.47
16.70
16.90
17.07
17.20
17.29
17.34
17.35
17.33
17.26
17.15
16.99
16.79
16.54
6.85
8.92
12.58
18.43
1.18
2.22
3.21
4.16
5.09
5.98
6.85
7.70
8.52
9.32
10.09
10.84
11.55
12.25
12.91
13.54
14.14
14.71
15.25
15.75
16.22
16.65
17.04
17.39
17.70
17.96
18.19
18.36
18.49
18.57
18.60
18.58
18.51
18.38
18.20
7.86
10.21
14.30
19.78
1.35
2.55
3.68
4.78
5.84
6.86
7.86
8.82
9.76
10.66
11.53
12.37
13.17
13.93
14.66
15.34
15.99
16.59
17.14
17.65
18.11
18.52
18.87
19.17
19.41
19.60
19.72
19.78
19.77
19.70
9.01
11.68
16.18
20.57
1.55
2.92
4.23
5.49
6.70
7.88
9.01
10.11
11.17
12.18
13.15
14.08
14.96
15.79
16.56
17.29
17.95
18.56
19.10
19.57
19.98
20.32
20.58
20.77
20.87
20.90
20.83
20.68
20.44
SK
0.15
0.20
0.31
0.61
0.02
0.04
0.06
0.09
0.11
0.13
0.15
0.17
0.19
0.22
0.24
0.26
0.28
0.30
0.32
0.34
0.37
0.39
0.41
0.43
0.45
0.47
0.50
0.52
0.54
0.56
0.58
0.60
0.62
0.65
0.67
0.69
0.71
0.73
0.75
0.77
0.80
0.82
0.84
0.86
0.88
0.90
0.93
0.95
0.97
0.99
1.01
1.03
1.05
1.08
1.10
1.12
1.14
1.16
1.18
1.21
1.23
1.25
1.27
1.29
1.31
1.33
1.36
1.38
1.40
1.42
1.44
1.46
1.49
1.51
0.21
0.29
0.44
0.87
0.03
0.06
0.09
0.12
0.15
0.18
0.21
0.24
0.27
0.31
0.34
0.37
0.40
0.43
0.46
0.49
0.52
0.55
0.58
0.61
0.64
0.67
0.70
0.73
0.76
0.79
0.82
0.86
0.89
0.92
0.95
0.98
1.01
1.04
1.07
1.10
1.13
1.16
1.19
1.22
1.25
1.28
1.31
1.34
1.37
1.41
1.44
1.47
1.50
1.53
1.56
1.59
1.62
1.65
1.68
1.71
1.74
1.77
1.80
1.83
1.86
1.89
1.92
1.96
1.99
2.02
2.05
2.08
2.11
2.14
v (m/s)
Dynamically balanced (for details see DIN 2211)
84
Pulleys
0.26
0.36
0.54
1.07
0.04
0.07
0.11
0.15
0.19
0.22
0.26
0.30
0.34
0.37
0.41
0.45
0.49
0.52
0.56
0.60
0.64
0.67
0.71
0.75
0.79
0.82
0.86
0.90
0.94
0.97
1.01
1.05
1.09
1.12
1.16
1.20
1.24
1.27
1.31
1.35
1.39
1.42
1.46
1.50
1.54
1.57
1.61
1.65
1.69
1.72
1.76
1.80
1.84
1.87
1.91
1.95
1.99
2.02
2.06
2.10
2.13
2.17
2.21
2.25
2.28
2.32
2.36
2.40
2.43
2.47
2.51
2.55
2.58
2.62
Power Ratings
optibelt SK section SPB, 5V/15N, 5V/15J
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 29
nk
(min-1)
140
150
160
180
190
200
212
224
236
250
280
315
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
3.46
4.42
6.09
9.07
0.66
1.21
1.71
2.17
2.62
3.05
3.46
3.85
4.23
4.60
4.95
5.29
5.62
5.94
6.24
6.54
6.82
7.08
7.34
7.58
7.81
8.02
8.22
8.41
8.58
8.74
8.88
9.01
9.12
9.22
9.30
9.36
9.41
9.44
9.45
9.45
9.42
9.38
9.31
9.23
9.13
9.01
8.86
8.70
8.51
8.30
8.07
7.82
7.54
7.24
6.92
6.57
6.19
5.79
5.37
4.04
5.19
7.20
10.83
0.76
1.39
1.97
2.52
3.05
3.55
4.04
4.51
4.96
5.40
5.83
6.24
6.63
7.01
7.38
7.73
8.07
8.40
8.71
9.00
9.28
9.54
9.79
10.02
10.23
10.42
10.60
10.76
10.90
11.02
11.12
11.21
11.27
11.31
11.33
11.33
11.30
11.25
11.18
11.09
10.97
10.82
10.65
10.46
10.24
9.99
9.72
9.41
9.08
8.72
8.33
7.91
7.46
6.98
6.47
4.62
5.95
8.29
12.53
0.85
1.57
2.24
2.87
3.48
4.06
4.62
5.17
5.69
6.20
6.69
7.17
7.63
8.08
8.51
8.92
9.31
9.69
10.05
10.39
10.72
11.03
11.31
11.58
11.83
12.06
12.26
12.45
12.61
12.75
12.86
12.96
13.02
13.07
13.08
13.08
13.04
12.98
12.89
12.77
12.62
12.44
12.23
11.99
11.72
11.42
11.08
10.72
10.31
9.87
9.40
8.89
8.34
7.76
7.14
5.77
7.46
10.44
15.71
1.04
1.94
2.77
3.56
4.32
5.06
5.77
6.46
7.13
7.78
8.41
9.01
9.60
10.16
10.71
11.23
11.73
12.21
12.67
13.10
13.51
13.89
14.24
14.57
14.88
15.15
15.39
15.61
15.79
15.95
16.07
16.16
16.21
16.23
16.22
16.17
16.08
15.95
15.78
15.58
15.33
15.04
14.71
14.33
13.92
13.45
12.94
12.38
11.78
11.13
6.34
8.20
11.49
17.18
1.14
2.12
3.03
3.91
4.75
5.56
6.34
7.10
7.84
8.56
9.25
9.92
10.57
11.19
11.79
12.36
12.91
13.44
13.93
14.41
14.85
15.26
15.64
16.00
16.32
16.61
16.86
17.08
17.27
17.42
17.53
17.60
17.63
17.63
17.58
17.49
17.36
17.18
16.95
16.68
16.36
16.00
15.58
15.11
14.60
6.91
8.94
12.53
18.57
1.23
2.30
3.29
4.25
5.16
6.05
6.91
7.74
8.55
9.33
10.09
10.82
11.52
12.20
12.85
13.48
14.07
14.64
15.18
15.68
16.15
16.59
17.00
17.37
17.70
18.00
18.26
18.48
18.66
18.79
18.88
18.93
18.93
18.89
18.80
18.66
18.47
18.22
17.93
17.58
17.17
16.71
16.19
15.62
14.98
7.59
9.82
13.76
20.13
1.35
2.51
3.61
4.66
5.66
6.64
7.59
8.50
9.39
10.25
11.08
11.88
12.65
13.40
14.11
14.79
15.44
16.05
16.63
17.17
17.67
18.14
18.57
18.95
19.29
19.59
19.84
20.05
20.20
20.31
20.37
20.38
20.33
20.22
20.06
19.84
19.57
19.23
18.83
18.36
8.26
10.69
14.96
21.57
1.46
2.73
3.92
5.06
6.16
7.23
8.26
9.26
10.22
11.16
12.06
12.93
13.77
14.57
15.34
16.07
16.77
17.42
18.04
18.61
19.14
19.62
20.06
20.45
20.79
21.08
21.31
21.50
21.62
21.69
21.70
21.64
21.53
21.35
21.10
20.78
20.40
19.94
19.41
18.81
8.92
11.56
16.15
22.87
1.57
2.94
4.23
5.47
6.66
7.81
8.92
10.00
11.05
12.06
13.03
13.97
14.87
15.73
16.55
17.33
18.07
18.76
19.40
20.00
20.55
21.04
21.48
21.87
22.20
22.47
22.67
22.82
22.90
22.91
22.85
22.72
22.52
22.25
21.90
9.70
12.56
17.50
24.21
1.70
3.19
4.59
5.94
7.23
8.48
9.70
10.87
12.00
13.10
14.15
15.16
16.13
17.06
17.93
18.76
19.54
20.27
20.94
21.56
22.11
22.61
23.05
23.41
23.72
23.95
24.11
24.19
24.20
24.13
23.98
23.74
23.42
23.01
22.51
11.33
14.66
20.30
26.40
1.98
3.72
5.36
6.93
8.45
9.92
11.33
12.70
14.02
15.28
16.50
17.65
18.76
19.80
20.78
21.69
22.54
23.31
24.02
24.64
25.19
25.65
26.03
26.31
26.50
26.60
26.60
26.49
26.28
25.96
13.21
17.04
23.36
27.68
2.30
4.33
6.24
8.08
9.85
11.56
13.21
14.79
16.30
17.75
19.13
20.44
21.67
22.82
23.88
24.86
25.74
26.52
27.20
27.77
28.24
28.58
28.81
28.91
28.88
28.71
28.41
27.96
27.36
355
375
400
2.84
5.36
7.74
10.03
12.22
14.32
16.33
18.25
20.07
21.79
23.40
24.89
26.26
27.51
28.62
29.58
30.39
31.04
31.53
31.84
31.96
31.90
31.63
31.16
3.07
5.79
8.36
10.82
13.18
15.44
17.59
19.64
21.57
23.39
25.07
26.62
28.02
29.27
30.35
31.26
31.99
32.53
32.86
32.99
32.89
32.57
SK
0.33
0.45
0.69
1.35
0.05
0.09
0.14
0.19
0.24
0.28
0.33
0.38
0.43
0.47
0.52
0.57
0.62
0.66
0.71
0.76
0.81
0.85
0.90
0.95
0.99
1.04
1.09
1.14
1.18
1.23
1.28
1.33
1.37
1.42
1.47
1.52
1.56
1.61
1.66
1.71
1.75
1.80
1.85
1.89
1.94
1.99
2.04
2.08
2.13
2.18
2.23
2.27
2.32
2.37
2.42
2.46
2.51
2.56
2.61
0.47
0.64
0.97
1.92
0.07
0.13
0.20
0.27
0.34
0.40
0.47
0.54
0.61
0.67
0.74
0.81
0.87
0.94
1.01
1.08
1.14
1.21
1.28
1.34
1.41
1.48
1.55
1.61
1.68
1.75
1.82
1.88
1.95
2.02
2.08
2.15
2.22
2.29
2.35
2.42
2.49
2.55
2.62
2.69
2.76
2.82
2.89
2.96
3.03
3.09
3.16
3.23
3.29
3.36
3.43
3.50
3.56
3.63
3.70
0.58
0.78
1.20
2.35
0.08
0.16
0.25
0.33
0.41
0.49
0.58
0.66
0.74
0.82
0.91
0.99
1.07
1.15
1.24
1.32
1.40
1.48
1.57
1.65
1.73
1.81
1.90
1.98
2.06
2.14
2.23
2.31
2.39
2.47
2.56
2.64
2.72
2.80
2.89
2.97
3.05
3.13
3.21
3.30
3.38
3.46
3.54
3.63
3.71
3.79
3.87
3.96
4.04
4.12
4.20
4.29
4.37
4.45
4.53
Pulleys
85
Power Ratings
optibelt SK section SPC
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 30
nk
(min-1)
224
250
280
300
315
335
355
375
400
450
500
560
630
710
700
950
1450
2850
50
100
200
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
3300
3350
3400
3450
3500
10.46
13.27
17.79
20.63
1.08
1.99
3.64
5.16
5.89
6.59
7.28
7.95
8.60
9.23
9.85
10.46
11.05
11.63
12.19
12.74
13.27
13.79
14.30
14.79
15.26
15.72
16.17
16.60
17.01
17.41
17.79
18.16
18.51
18.84
19.16
19.45
19.73
19.99
20.24
20.46
20.66
20.85
21.01
21.16
21.28
21.38
21.46
21.52
21.56
21.57
21.57
21.53
21.48
21.40
21.30
21.17
21.02
20.84
20.63
20.40
20.14
19.86
19.55
19.21
18.84
18.44
18.02
17.56
17.08
16.56
16.02
15.44
13.11
16.71
22.48
25.52
1.31
2.44
4.49
6.40
7.31
8.20
9.07
9.91
10.74
11.55
12.34
13.11
13.87
14.60
15.32
16.02
16.71
17.37
18.02
18.64
19.25
19.84
20.41
20.96
21.49
21.99
22.48
22.94
23.39
23.81
24.20
24.58
24.92
25.25
25.55
25.82
26.07
26.29
26.49
26.66
26.79
26.91
26.99
27.04
27.06
27.05
27.02
26.94
26.84
26.71
26.54
26.33
26.10
25.83
25.52
25.18
24.80
24.38
23.93
23.43
22.90
22.33
21.72
21.07
20.38
19.65
18.87
18.05
16.13
20.58
27.64
29.58
1.58
2.94
5.46
7.81
8.94
10.04
11.11
12.16
13.19
14.19
15.17
16.13
17.06
17.98
18.87
19.74
20.58
21.40
22.20
22.97
23.72
24.44
25.13
25.80
26.44
27.06
27.64
28.20
28.72
29.22
29.68
30.11
30.51
30.88
31.21
31.51
31.77
31.99
32.18
32.34
32.45
32.52
32.56
32.55
32.50
32.41
32.28
32.10
31.88
31.62
31.30
30.94
30.54
30.08
29.58
29.03
28.42
27.77
27.06
26.30
25.49
24.62
23.69
18.11
23.11
30.92
31.27
1.75
3.28
6.11
8.75
10.01
11.25
12.46
13.64
14.80
15.93
17.03
18.11
19.16
20.19
21.19
22.16
23.11
24.03
24.91
25.77
26.61
27.41
28.17
28.91
29.62
30.29
30.92
31.53
32.09
32.62
33.11
33.56
33.98
34.35
34.68
34.97
35.22
35.42
35.58
35.69
35.76
35.78
35.75
35.67
35.54
35.36
35.13
34.84
34.50
34.10
33.65
33.14
32.58
19.58
24.97
33.30
31.96
1.89
3.53
6.59
9.44
10.82
12.16
13.47
14.75
16.00
17.22
18.42
19.58
20.72
21.83
22.91
23.96
24.97
25.96
26.92
27.84
28.73
29.58
30.40
31.18
31.93
32.63
33.30
33.93
34.52
35.06
35.56
36.02
36.43
36.80
37.12
37.39
37.61
37.79
37.91
37.97
37.99
37.95
37.85
37.70
37.49
37.22
36.89
36.50
36.05
35.53
34.95
34.30
33.59
21.52
27.42
36.35
23.44
29.82
39.26
25.34
32.18
42.02
27.68
35.05
45.25
32.24
40.55
50.94
36.64
45.70
55.51
41.70
51.38
59.36
47.28
57.27
61.37
53.19
62.91
2.06
3.87
7.22
10.37
11.88
13.36
14.80
16.21
17.59
18.93
20.24
21.52
22.77
23.99
25.17
26.31
27.42
28.50
29.53
30.53
31.49
32.41
33.28
34.12
34.91
35.65
36.35
37.00
37.61
38.16
38.66
39.11
39.51
39.85
40.14
40.37
40.54
40.65
40.69
40.68
40.60
40.46
40.25
39.97
39.63
39.21
38.72
38.16
2.23
4.20
7.86
11.29
12.94
14.55
16.12
17.66
19.16
20.62
22.05
23.44
24.80
26.11
27.39
28.63
29.82
30.98
32.09
33.16
34.18
35.15
36.07
36.95
37.77
38.54
39.26
39.92
40.53
41.07
41.56
41.98
42.35
42.64
42.87
43.04
43.13
43.16
43.11
42.99
42.79
42.51
42.16
41.73
41.21
40.61
39.93
39.16
2.41
4.53
8.49
12.21
13.99
15.73
17.44
19.10
20.72
22.30
23.84
25.34
26.80
28.21
29.58
30.90
32.18
33.41
34.58
35.71
36.78
37.80
38.76
39.67
40.52
41.30
42.02
42.68
43.27
43.79
44.24
44.62
44.93
45.16
45.32
45.39
45.39
45.30
45.13
44.87
44.52
44.08
43.55
2.62
4.95
9.28
13.34
15.30
17.21
19.07
20.88
22.65
24.37
26.05
27.68
29.26
30.78
32.26
33.68
35.05
36.36
37.61
38.80
39.93
40.99
41.98
42.91
43.77
44.55
45.25
45.88
46.43
46.90
47.29
47.58
47.79
47.91
47.94
47.87
47.70
47.44
47.07
46.60
46.02
45.33
44.53
3.05
5.77
10.84
15.60
17.88
20.11
22.28
24.39
26.44
28.44
30.37
32.24
34.04
35.77
37.44
39.03
40.55
41.99
43.34
44.62
45.81
46.90
47.91
48.82
49.63
50.34
50.94
51.44
51.83
52.10
52.25
52.28
52.19
51.97
51.62
51.14
50.52
49.76
3.48
6.58
12.38
17.83
20.44
22.97
25.44
27.83
30.15
32.39
34.56
36.64
38.64
40.54
42.36
44.08
45.70
47.21
48.62
49.92
51.10
52.16
53.10
53.90
54.58
55.12
55.51
55.76
55.86
55.81
55.59
55.21
54.67
3.99
7.56
14.22
20.47
23.45
26.35
29.15
31.86
34.48
36.99
39.40
41.70
43.89
45.95
47.89
49.71
51.38
52.92
54.30
55.54
56.61
57.52
58.25
58.81
59.19
59.37
59.36
59.15
4.58
8.68
16.34
23.50
26.90
30.20
33.37
36.42
39.34
42.13
44.78
47.28
49.62
51.80
53.80
55.63
57.27
58.71
59.94
60.96
61.76
62.33
62.65
62.73
62.55
62.10
61.37
5.25
9.95
18.73
26.90
30.77
34.48
38.04
41.44
44.66
47.70
50.55
53.19
55.61
57.81
59.77
61.47
62.91
64.08
64.95
65.53
65.79
65.72
65.31
SK
0.90
1.22
1.86
3.67
0.06
0.13
0.26
0.39
0.45
0.51
0.58
0.64
0.71
0.77
0.84
0.90
0.96
1.03
1.09
1.16
1.22
1.29
1.35
1.41
1.48
1.54
1.61
1.67
1.74
1.80
1.86
1.93
1.99
2.06
2.12
2.19
2.25
2.31
2.38
2.44
2.51
2.57
2.64
2.70
2.77
2.83
2.89
2.96
3.02
3.09
3.15
3.22
3.28
3.34
3.41
3.47
3.54
3.60
3.67
3.73
3.79
3.86
3.92
3.99
4.05
4.12
4.18
4.24
4.31
4.37
4.44
4.50
1.28
1.73
2.65
5.20
0.09
0.18
0.37
0.55
0.64
0.73
0.82
0.91
1.00
1.10
1.19
1.28
1.37
1.46
1.55
1.64
1.73
1.83
1.92
2.01
2.10
2.19
2.28
2.37
2.46
2.56
2.65
2.74
2.83
2.92
3.01
3.10
3.19
3.29
3.38
3.47
3.56
3.65
3.74
3.83
3.92
4.02
4.11
4.20
4.29
4.38
4.47
4.56
4.66
4.75
4.84
4.93
5.02
5.11
5.20
5.29
5.39
5.48
5.57
5.66
5.75
5.84
5.93
6.02
6.12
6.21
6.30
6.39
v (m/s)
Dynamically balanced (for details see DIN 2211)
86
Pulleys
1.57
2.13
3.25
6.38
0.11
0.22
0.45
0.67
0.78
0.90
1.01
1.12
1.23
1.34
1.45
1.57
1.68
1.79
1.90
2.01
2.13
2.24
2.35
2.46
2.57
2.69
2.80
2.91
3.02
3.13
3.25
3.36
3.47
3.58
3.69
3.80
3.92
4.03
4.14
4.25
4.36
4.48
4.59
4.70
4.81
4.92
5.04
5.15
5.26
5.37
5.48
5.60
5.71
5.82
5.93
6.04
6.16
6.27
6.38
6.49
6.60
6.71
6.83
6.94
7.05
7.16
7.27
7.39
7.50
7.61
7.72
7.83
Power Ratings
optibelt SK section 8V/25N, 8V/25J
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 31
nk
(min-1)
335
355
375
425
450
475
500
530
560
600
630
710
800
700
950
1450
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
25.67
32.09
40.47
2.63
4.87
6.97
8.97
10.89
12.74
14.54
16.28
17.97
19.61
21.20
22.74
24.23
25.67
27.06
28.40
29.68
30.91
32.09
33.21
34.27
35.27
36.21
37.09
37.90
38.65
39.33
39.93
40.47
40.93
41.31
41.62
41.85
41.99
42.05
42.03
41.92
41.72
41.42
41.04
40.55
39.97
39.29
38.50
37.62
28.61
35.77
44.90
2.89
5.38
7.71
9.94
12.08
14.15
16.16
18.11
20.00
21.83
23.61
25.33
27.00
28.61
30.16
31.66
33.09
34.46
35.77
37.01
38.18
39.29
40.32
41.28
42.16
42.97
43.70
44.34
44.90
45.37
45.75
46.04
46.24
46.34
46.35
46.25
46.05
45.74
45.32
44.79
44.15
43.40
42.52
41.53
40.41
31.52
39.37
49.10
3.16
5.89
8.46
10.91
13.27
15.56
17.78
19.93
22.01
24.04
26.00
27.90
29.74
31.52
33.23
34.87
36.44
37.94
39.37
40.72
42.00
43.19
44.30
45.33
46.27
47.12
47.88
48.54
49.10
49.56
49.91
50.16
50.30
50.33
50.24
50.04
49.71
49.26
48.69
47.98
47.14
46.16
45.05
43.79
42.40
38.62
48.03
58.51
3.82
7.15
10.30
13.31
16.22
19.04
21.77
24.42
26.99
29.48
31.89
34.22
36.46
38.62
40.69
42.67
44.56
46.34
48.03
49.61
51.09
52.45
53.69
54.82
55.82
56.69
57.44
58.04
58.51
58.84
59.01
59.04
58.90
58.61
58.15
57.52
56.72
55.74
54.58
53.23
42.08
52.17
62.60
4.15
7.78
11.22
14.51
17.68
20.76
23.74
26.64
29.44
32.16
34.78
37.31
39.75
42.08
44.32
46.45
48.47
50.38
52.17
53.84
55.38
56.79
58.06
59.20
60.19
61.03
61.71
62.24
62.60
62.80
62.81
62.65
62.31
61.77
61.05
60.12
58.98
57.64
56.08
54.31
45.49
56.17
66.25
4.48
8.41
12.13
15.69
19.14
22.47
25.71
28.84
31.87
34.81
37.64
40.36
42.98
45.49
47.87
50.14
52.28
54.29
56.17
57.90
59.49
60.93
62.20
63.32
64.27
65.04
65.63
66.04
66.25
66.27
66.08
65.69
65.08
64.25
63.19
48.82
60.03
69.44
4.80
9.03
13.03
16.88
20.59
24.18
27.66
31.02
34.28
37.43
40.46
43.37
46.16
48.82
51.35
53.74
55.99
58.09
60.03
61.81
63.42
64.85
66.11
67.17
68.04
68.71
69.17
69.42
69.44
69.24
68.80
68.11
67.18
65.99
64.54
52.74
64.47
72.63
5.19
9.78
14.12
18.29
22.31
26.21
29.98
33.62
37.14
40.54
43.80
46.92
49.91
52.74
55.42
57.94
60.30
62.47
64.47
66.27
67.87
69.27
70.46
71.42
72.16
72.65
72.90
72.90
72.63
56.57
68.68
75.10
5.58
10.52
15.20
19.69
24.03
28.22
32.28
36.19
39.97
43.60
47.08
50.41
53.57
56.57
59.38
62.01
64.44
66.67
68.68
70.48
72.04
73.36
74.44
75.25
75.80
76.06
76.04
75.72
75.10
61.51
73.95
77.18
6.10
11.51
16.63
21.56
26.30
30.89
35.32
39.58
43.69
47.62
51.38
54.95
58.33
61.51
64.46
67.20
69.70
71.95
73.95
75.68
77.12
78.28
79.13
79.66
79.87
79.74
79.25
65.09
77.62
77.79
6.48
12.24
17.70
22.94
28.00
32.87
37.57
42.10
46.44
50.59
54.54
58.28
61.80
65.09
68.13
70.92
73.44
75.67
77.62
79.25
80.56
81.53
82.16
82.42
82.31
81.80
80.89
79.56
77.79
74.10
86.13
83.23
93.33
7.51
14.19
20.53
26.61
32.46
38.09
43.49
48.66
53.59
58.27
62.67
66.79
70.61
74.10
77.26
80.06
82.49
84.52
86.13
87.31
88.04
88.30
88.06
87.31
86.03
8.65
16.37
23.68
30.68
37.40
43.84
49.98
55.82
61.33
66.50
71.30
75.70
79.69
83.23
86.31
88.88
90.92
92.42
93.33
93.63
93.28
92.28
90.56
88.14
SK
1.83
2.48
6.60
0.13
0.26
0.39
0.52
0.65
0.78
0.91
1.05
1.18
1.31
1.44
1.57
1.70
1.83
1.96
2.09
2.22
2.35
2.48
2.61
2.74
2.88
3.01
3.14
3.27
3.40
3.53
3.66
3.79
3.92
4.05
4.18
4.31
4.44
4.57
4.70
4.84
4.97
5.10
5.23
5.36
5.49
5.62
5.75
5.88
2.60
3.52
3.18
4.32
0.19 0.23
0.37 0.45
0.56 0.68
0.74 0.91
0.93 1.14
1.11 1.36
1.30 1.59
1.48 1.82
1.67 2.05
1.86 2.27
2.04 2.50
2.23 2.73
2.41 2.96
2.60 3.18
2.78 3.41
2.97 3.64
3.15 3.87
3.34 4.09
3.52 4.32
3.71 4.55
3.90 4.78
4.08 5.00
4.27 5.23
4.45 5.46
4.64 5.69
4.82 5.91
5.01 6.14
5.19 6.37
5.38 6.60
5.57 6.82
5.75 7.05
5.94 7.28
6.12 7.51
6.31 7.73
6.49 7.96
6.68 8.19
6.86 8.42
7.05 8.64
7.23 8.87
7.42 9.10
7.61 9.33
7.79 9.55
7.98 9.78
8.16 10.01
8.35 10.23
Pulleys
87
Power Ratings
optibelt RED POWER II Section SPZ, 3V/9N, 3V/9J
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 32
nk
(min-1)
63
71
80
85
90
95
100
112
125
132
140
150
160
180
200
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5800
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
8200
8400
0.60
0.77
1.08
1.80
0.11
0.21
0.30
0.38
0.45
0.53
0.60
0.67
0.74
0.80
0.87
0.93
0.99
1.05
1.11
1.17
1.23
1.28
1.34
1.39
1.44
1.49
1.54
1.59
1.64
1.69
1.74
1.78
1.83
1.87
1.91
1.95
1.99
2.03
2.07
2.11
2.15
2.18
2.22
2.25
2.29
2.32
2.35
2.38
2.41
2.44
2.47
2.49
2.52
2.54
2.57
2.59
2.61
2.63
2.65
2.67
2.70
2.73
2.75
2.77
2.78
2.79
2.80
2.80
2.79
2.78
2.77
2.75
2.72
2.69
0.80
1.03
1.47
2.50
0.15
0.27
0.38
0.49
0.60
0.70
0.80
0.89
0.99
1.08
1.17
1.25
1.34
1.43
1.51
1.59
1.67
1.75
1.83
1.90
1.98
2.05
2.13
2.20
2.27
2.34
2.40
2.47
2.54
2.60
2.66
2.73
2.79
2.85
2.90
2.96
3.02
3.07
3.13
3.18
3.23
3.28
3.33
3.37
3.42
3.46
3.51
3.55
3.59
3.63
3.67
3.70
3.74
3.77
3.80
3.83
3.89
3.94
3.99
4.02
4.06
4.08
4.10
4.11
4.11
4.11
4.10
4.09
4.06
4.03
1.02
1.32
1.89
3.28
0.18
0.34
0.48
0.62
0.76
0.89
1.02
1.14
1.26
1.38
1.50
1.61
1.73
1.84
1.95
2.06
2.16
2.27
2.37
2.47
2.57
2.67
2.77
2.87
2.96
3.05
3.14
3.23
3.32
3.41
3.49
3.58
3.66
3.74
3.82
3.89
3.97
4.04
4.12
4.19
4.26
4.32
4.39
4.45
4.51
4.58
4.63
4.69
4.75
4.80
4.85
4.90
4.95
4.99
5.03
5.08
5.15
5.22
5.28
5.33
5.38
5.41
5.43
5.45
5.45
5.45
5.43
5.41
5.37
5.32
1.14
1.48
2.13
3.70
0.20
0.38
0.54
0.69
0.85
0.99
1.14
1.28
1.41
1.55
1.68
1.81
1.94
2.07
2.19
2.31
2.44
2.55
2.67
2.79
2.90
3.01
3.12
3.23
3.34
3.44
3.55
3.65
3.75
3.85
3.94
4.04
4.13
4.22
4.31
4.40
4.49
4.57
4.65
4.73
4.81
4.89
4.96
5.03
5.10
5.17
5.24
5.30
5.36
5.42
5.48
5.53
5.59
5.64
5.69
5.73
5.82
5.89
5.96
6.01
6.05
6.09
6.11
6.12
6.12
6.11
6.08
6.05
6.00
5.94
1.26
1.64
2.36
4.12
0.22
0.41
0.59
0.77
0.93
1.10
1.26
1.41
1.57
1.72
1.86
2.01
2.15
2.29
2.43
2.57
2.70
2.84
2.97
3.10
3.22
3.35
3.47
3.59
3.71
3.83
3.95
4.06
4.17
4.28
4.39
4.50
4.60
4.70
4.80
4.90
4.99
5.09
5.18
5.27
5.35
5.44
5.52
5.60
5.68
5.75
5.83
5.90
5.96
6.03
6.09
6.15
6.21
6.26
6.31
6.36
6.45
6.53
6.60
6.65
6.69
6.72
6.74
6.74
6.73
6.71
6.67
6.62
6.55
6.47
1.38
1.80
2.60
4.53
0.24
0.45
0.65
0.84
1.02
1.20
1.38
1.55
1.72
1.88
2.05
2.21
2.36
2.52
2.67
2.82
2.97
3.12
3.26
3.41
3.55
3.68
3.82
3.95
4.09
4.22
4.34
4.47
4.59
4.71
4.83
4.95
5.06
5.17
5.28
5.39
5.49
5.60
5.70
5.79
5.89
5.98
6.07
6.15
6.24
6.32
6.40
6.47
6.54
6.61
6.68
6.74
6.80
6.86
6.91
6.97
7.06
7.14
7.20
7.25
7.29
7.31
7.32
7.31
7.29
7.25
7.19
7.12
7.03
6.92
1.50
1.96
2.83
4.94
0.26
0.49
0.70
0.91
1.11
1.30
1.50
1.68
1.87
2.05
2.23
2.40
2.57
2.74
2.91
3.08
3.24
3.40
3.56
3.71
3.87
4.02
4.16
4.31
4.45
4.60
4.73
4.87
5.01
5.14
5.27
5.39
5.52
5.64
5.75
5.87
5.98
6.09
6.20
6.30
6.41
6.50
6.60
6.69
6.78
6.87
6.95
7.03
7.11
7.18
7.25
7.31
7.38
7.43
7.49
7.54
7.63
7.71
7.77
7.82
7.84
7.86
7.85
7.83
7.78
7.72
7.64
7.54
7.42
7.28
1.78
2.08
2.25
2.43
2.66
2.89
3.35
3.80
2.33
2.74
2.95
3.20
3.50
3.80
4.40
4.99
3.38
3.96
4.28
4.63
5.07
5.50
6.36
7.19
5.90
6.90
7.43
8.01
8.72
9.41 10.70 11.88
0.31
0.36
0.38
0.41
0.45
0.49
0.56
0.64
0.58
0.67
0.72
0.78
0.85
0.92
1.07
1.21
0.83
0.97
1.04
1.13
1.24
1.34
1.55
1.76
1.08
1.26
1.36
1.47
1.61
1.74
2.02
2.29
1.32
1.54
1.66
1.80
1.97
2.13
2.47
2.80
1.55
1.82
1.96
2.12
2.32
2.52
2.91
3.30
1.78
2.08
2.25
2.43
2.66
2.89
3.35
3.80
2.00
2.35
2.53
2.74
3.00
3.26
3.77
4.28
2.22
2.61
2.81
3.05
3.34
3.62
4.19
4.75
2.44
2.86
3.09
3.35
3.66
3.98
4.60
5.22
2.66
3.12
3.36
3.64
3.99
4.33
5.01
5.67
2.87
3.36
3.63
3.93
4.30
4.67
5.40
6.12
3.07
3.61
3.89
4.21
4.61
5.01
5.79
6.55
3.28
3.85
4.15
4.49
4.92
5.34
6.17
6.98
3.48
4.08
4.40
4.77
5.22
5.67
6.54
7.40
3.68
4.31
4.65
5.04
5.52
5.99
6.91
7.80
3.87
4.54
4.90
5.31
5.81
6.30
7.26
8.20
4.06
4.77
5.14
5.57
6.09
6.61
7.61
8.58
4.25
4.99
5.38
5.82
6.37
6.91
7.95
8.96
4.44
5.21
5.62
6.08
6.64
7.20
8.28
9.32
4.62
5.42
5.85
6.32
6.91
7.49
8.60
9.67
4.80
5.63
6.07
6.57
7.17
7.77
8.91 10.01
4.98
5.84
6.29
6.80
7.43
8.04
9.22 10.33
5.15
6.04
6.51
7.03
7.68
8.31
9.51 10.64
5.32
6.24
6.72
7.26
7.92
8.56
9.79 10.94
5.49
6.43
6.93
7.48
8.16
8.82 10.07 11.23
5.66
6.62
7.13
7.70
8.39
9.06 10.33 11.50
5.82
6.81
7.33
7.91
8.61
9.29 10.58 11.76
5.98
6.99
7.52
8.11
8.83
9.52 10.82 12.00
6.13
7.17
7.71
8.31
9.04
9.74 11.05 12.23
6.28
7.34
7.89
8.50
9.24
9.95 11.27 12.44
6.43
7.51
8.07
8.69
9.44 10.15 11.47 12.64
6.58
7.67
8.24
8.87
9.63 10.35 11.67 12.81
6.72
7.83
8.41
9.05
9.81 10.53 11.85 12.98
6.85
7.99
8.57
9.21
9.98 10.70 12.01 13.12
6.99
8.14
8.73
9.38 10.15 10.87 12.17 13.25
7.12
8.28
8.88
9.53 10.30 11.02 12.31 13.36
7.24
8.42
9.02
9.68 10.45 11.17 12.43 13.45
7.37
8.56
9.16
9.82 10.59 11.31 12.55 13.52
7.49
8.68
9.29
9.95 10.72 11.43 12.65 13.57
7.60
8.81
9.42 10.08 10.84 11.54 12.73 13.60
7.71
8.93
9.54 10.20 10.96 11.65 12.80 13.61
7.82
9.04
9.65 10.31 11.06 11.74 12.85 13.60
7.92
9.15
9.76 10.41 11.16 11.82 12.89 13.57
8.02
9.25
9.86 10.51 11.24 11.89 12.91 13.51
8.11
9.34
9.95 10.59 11.32 11.95 12.91 13.44
8.20
9.43 10.04 10.67 11.38 12.00 12.90 13.34
8.29
9.52 10.12 10.74 11.44 12.03 12.87 13.22
8.37
9.59 10.19 10.81 11.49 12.05 12.82 13.07
8.45
9.67 10.25 10.86 11.52 12.06 12.76 12.90
8.52
9.73 10.31 10.91 11.54 12.06 12.68 12.71
8.58
9.79 10.36 10.94 11.56 12.04 12.58 12.49
8.64
9.84 10.40 10.97 11.56 12.01 12.46
8.70
9.89 10.44 10.99 11.55 11.97 12.32
8.75
9.93 10.47 11.00 11.53 11.91 12.16
8.80
9.96 10.48 11.00 11.50 11.84 11.99
8.88 10.00 10.50 10.97 11.40 11.65 11.57
8.94 10.01 10.48 10.90 11.25 11.41
8.97 10.00 10.42 10.79 11.06 11.11
8.99
9.95 10.33 10.63 10.81 10.74
8.98
9.88 10.20 10.44 10.51
8.95
9.77 10.04 10.20 10.15
8.89
9.62
9.84
9.91
9.74
vmax 55 m/s
8.81
9.45
9.59
9.58
8.70
9.24
9.31
9.19
8.57
8.99
8.98
Where v > 42 m/s,
8.41
8.71
8.61
please consult our
8.22
8.38
Applications Engineering
8.01
8.03
7.77
7.63
Department
0.06
0.09
0.13
0.26
0.01
0.02
0.03
0.04
0.05
0.06
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.19
0.20
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.54
0.56
0.57
0.59
0.61
0.63
0.65
0.67
0.69
0.70
0.72
0.74
0.76
0.78
0.09
0.12
0.19
0.37
0.01
0.03
0.04
0.05
0.07
0.08
0.09
0.11
0.12
0.13
0.14
0.16
0.17
0.18
0.20
0.21
0.22
0.24
0.25
0.26
0.28
0.29
0.30
0.32
0.33
0.34
0.35
0.37
0.38
0.39
0.41
0.42
0.43
0.45
0.46
0.47
0.49
0.50
0.51
0.53
0.54
0.55
0.57
0.58
0.59
0.60
0.62
0.63
0.64
0.66
0.67
0.68
0.70
0.71
0.72
0.74
0.76
0.79
0.81
0.84
0.87
0.89
0.92
0.95
0.97
1.00
1.03
1.05
1.08
1.10
RED POWER II
0.11
0.15
0.23
0.46
0.02
0.03
0.05
0.06
0.08
0.10
0.11
0.13
0.15
0.16
0.18
0.19
0.21
0.23
0.24
0.26
0.27
0.29
0.31
0.32
0.34
0.35
0.37
0.39
0.40
0.42
0.44
0.45
0.47
0.48
0.50
0.52
0.53
0.55
0.56
0.58
0.60
0.61
0.63
0.64
0.66
0.68
0.69
0.71
0.73
0.74
0.76
0.77
0.79
0.81
0.82
0.84
0.85
0.87
0.89
0.90
0.93
0.97
1.00
1.03
1.06
1.10
1.13
1.16
1.19
1.22
1.26
1.29
1.32
1.35
v (m/s)
Dynamically balanced (for details see DIN 2211)
88
Pulleys
Note: Pulley diameters shown are outside diameters for sections 3V/9N, 3V/9J.
Power Ratings
optibelt RED POWER II Section SPA
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 33
nk
(min-1)
90
95
100
112
125
132
140
150
160
180
200
224
250
280
315
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
6100
6200
6300
6400
6500
6600
6700
6800
6900
7000
1.34
1.72
2.40
3.91
0.26
0.47
0.66
0.84
1.02
1.18
1.34
1.50
1.64
1.79
1.93
2.07
2.20
2.33
2.46
2.59
2.71
2.83
2.94
3.06
3.17
3.27
3.38
3.48
3.58
3.68
3.77
3.87
3.96
4.04
4.13
4.21
4.29
4.37
4.44
4.51
4.58
4.65
4.71
4.77
4.83
4.88
4.94
4.99
5.03
5.07
5.12
5.15
5.19
5.22
5.25
5.27
5.29
5.31
5.33
5.34
5.35
5.35
5.36
5.36
5.35
5.34
5.33
5.31
5.30
5.27
5.25
5.22
5.18
5.14
1.54
1.98
2.78
4.61
0.29
0.53
0.75
0.96
1.16
1.35
1.54
1.72
1.89
2.06
2.23
2.39
2.55
2.70
2.86
3.00
3.15
3.29
3.43
3.57
3.70
3.83
3.96
4.08
4.20
4.32
4.44
4.55
4.66
4.77
4.87
4.97
5.07
5.17
5.26
5.35
5.43
5.52
5.60
5.67
5.75
5.82
5.89
5.95
6.01
6.07
6.12
6.17
6.22
6.26
6.30
6.34
6.37
6.40
6.42
6.45
6.46
6.48
6.49
6.49
6.49
6.49
6.49
6.48
6.46
6.44
6.42
6.39
6.36
6.32
1.73
2.24
3.16
5.29
0.32
0.59
0.84
1.08
1.30
1.52
1.73
1.94
2.14
2.34
2.53
2.71
2.90
3.07
3.25
3.42
3.59
3.76
3.92
4.08
4.23
4.38
4.53
4.68
4.82
4.96
5.09
5.23
5.36
5.48
5.61
5.73
5.84
5.96
6.07
6.17
6.27
6.37
6.47
6.56
6.65
6.74
6.82
6.89
6.97
7.04
7.11
7.17
7.23
7.28
7.33
7.38
7.42
7.46
7.49
7.52
7.54
7.56
7.58
7.59
7.60
7.60
7.60
7.59
7.58
7.56
7.54
7.51
7.48
7.44
2.20
2.86
4.07
6.91
0.40
0.74
1.05
1.36
1.65
1.93
2.20
2.47
2.73
2.98
3.23
3.48
3.72
3.96
4.19
4.41
4.64
4.86
5.07
5.28
5.49
5.69
5.89
6.09
6.28
6.46
6.65
6.83
7.00
7.17
7.34
7.50
7.66
7.81
7.96
8.10
8.24
8.38
8.51
8.63
8.76
8.87
8.98
9.09
9.19
9.29
9.38
9.46
9.54
9.62
9.69
9.75
9.81
9.86
9.91
9.95
9.98
10.01
10.04
10.05
10.06
10.07
10.06
10.05
10.04
10.01
9.98
9.95
9.90
9.85
2.70
3.52
5.04
8.63
0.48
0.89
1.28
1.65
2.01
2.36
2.70
3.04
3.36
3.68
3.99
4.30
4.60
4.90
5.19
5.48
5.76
6.03
6.30
6.57
6.83
7.09
7.34
7.58
7.82
8.06
8.29
8.52
8.74
8.95
9.16
9.36
9.56
9.75
9.94
10.12
10.29
10.46
10.62
10.78
10.93
11.07
11.21
11.34
11.46
11.58
11.69
11.79
11.89
11.97
12.05
12.13
12.19
12.25
12.30
12.34
12.37
12.40
12.42
12.42
12.42
12.41
12.40
12.37
12.34
12.29
12.24
12.17
12.10
12.02
2.97
3.88
5.56
9.53
0.52
0.98
1.40
1.81
2.21
2.60
2.97
3.34
3.70
4.05
4.40
4.74
5.07
5.40
5.72
6.04
6.35
6.66
6.96
7.25
7.54
7.83
8.10
8.38
8.64
8.90
9.16
9.41
9.65
9.89
10.12
10.34
10.56
10.77
10.97
11.17
11.36
11.55
11.72
11.89
12.05
12.21
12.35
12.49
12.63
12.75
12.86
12.97
13.07
13.16
13.24
13.31
13.38
13.43
13.48
13.52
13.54
13.56
13.57
13.57
13.55
13.53
13.50
13.46
13.40
13.34
13.26
13.18
13.08
12.97
3.28
4.28
6.15
10.54
0.57
1.07
1.54
2.00
2.43
2.86
3.28
3.68
4.08
4.48
4.86
5.24
5.61
5.97
6.33
6.68
7.03
7.37
7.70
8.03
8.35
8.66
8.97
9.27
9.57
9.85
10.14
10.41
10.68
10.94
11.19
11.44
11.67
11.90
12.13
12.34
12.55
12.75
12.94
13.12
13.29
13.46
13.61
13.76
13.90
14.03
14.14
14.25
14.35
14.44
14.52
14.59
14.65
14.69
14.73
14.76
14.77
14.77
14.77
14.75
14.71
14.67
14.61
14.55
14.47
14.37
14.27
14.15
14.02
13.87
3.66
4.78
6.88
11.79
0.64
1.19
1.72
2.22
2.71
3.19
3.66
4.11
4.56
5.00
5.43
5.86
6.27
6.68
7.08
7.48
7.86
8.25
8.62
8.98
9.34
9.69
10.04
10.37
10.70
11.02
11.33
11.64
11.93
12.22
12.50
12.77
13.03
13.28
13.52
13.76
13.98
14.19
14.40
14.59
14.78
14.95
15.11
15.26
15.40
15.53
15.65
15.75
15.84
15.92
15.99
16.05
16.09
16.12
16.14
16.15
16.14
16.11
16.08
16.03
15.96
15.88
15.78
15.67
15.55
15.41
15.25
15.08
14.89
14.69
4.03
5.28
7.61
13.00
0.70
1.31
1.89
2.45
2.99
3.52
4.03
4.54
5.04
5.52
6.00
6.47
6.93
7.38
7.83
8.26
8.69
9.11
9.52
9.93
10.32
10.71
11.09
11.45
11.81
12.16
12.50
12.84
13.16
13.47
13.77
14.06
14.34
14.61
14.87
15.12
15.35
15.58
15.79
15.99
16.18
16.35
16.52
16.66
16.80
16.92
17.03
17.13
17.21
17.27
17.32
17.36
17.38
17.38
17.37
17.35
17.30
17.24
17.17
17.08
16.96
16.84
16.69
16.53
16.34
4.78
6.27
9.03
15.33
0.82
1.54
2.23
2.90
3.54
4.17
4.78
5.39
5.98
6.56
7.12
7.68
8.23
8.77
9.30
9.81
10.32
10.81
11.30
11.77
12.24
12.69
13.13
13.56
13.97
14.37
14.76
15.14
15.51
15.86
16.20
16.52
16.83
17.12
17.40
17.66
17.91
18.14
18.35
18.55
18.73
18.89
19.04
19.17
19.28
19.36
19.43
19.49
19.52
19.53
19.52
19.48
19.43
19.36
19.26
19.14
19.00
18.83
5.53
7.24
10.43
17.52
0.94
1.78
2.57
3.34
4.09
4.81
5.53
6.22
6.91
7.58
8.23
8.88
9.51
10.13
10.73
11.33
11.91
12.47
13.03
13.56
14.09
14.60
15.09
15.57
16.03
16.48
16.91
17.32
17.72
18.09
18.45
18.79
19.11
19.41
19.69
19.95
20.19
20.41
20.60
20.77
20.92
21.05
21.15
21.23
21.28
21.30
21.30
21.28
21.22
21.14
21.03
20.90
6.41
8.40
12.08
19.96
1.09
2.06
2.98
3.87
4.73
5.58
6.41
7.22
8.01
8.78
9.54
10.29
11.02
11.73
12.42
13.10
13.76
14.41
15.03
15.64
16.22
16.79
17.34
17.87
18.37
18.85
19.31
19.75
20.17
20.55
20.92
21.26
21.57
21.85
22.11
22.34
22.53
22.70
22.84
22.95
23.02
23.07
23.08
23.05
22.99
22.90
7.35
9.63
13.81
22.35
1.24
2.35
3.41
4.44
5.43
6.40
7.35
8.28
9.18
10.07
10.94
11.78
12.61
13.42
14.20
14.96
15.70
16.42
17.11
17.78
18.43
19.04
19.63
20.19
20.73
21.23
21.70
22.14
22.55
22.93
23.27
23.57
23.84
24.08
24.27
24.43
24.54
24.62
24.65
24.64
24.59
24.49
8.42
11.03
15.75
24.75
1.42
2.70
3.91
5.08
6.23
7.34
8.42
9.48
10.52
11.53
12.51
13.47
14.41
15.31
16.19
17.04
17.86
18.64
19.40
20.12
20.81
21.46
22.08
22.66
23.19
23.69
24.15
24.56
24.93
25.25
25.52
25.75
25.93
26.05
26.12
26.14
26.11
9.66
12.62
17.93
27.01
1.63
3.09
4.49
5.83
7.14
8.42
9.66
10.87
12.05
13.19
14.31
15.39
16.43
17.44
18.40
19.34
20.24
21.08
21.89
22.65
23.36
24.03
24.64
25.20
25.70
26.15
26.54
26.87
27.14
27.34
27.47
27.54
27.54
0.15
0.20
0.31
0.61
0.02
0.04
0.06
0.09
0.11
0.13
0.15
0.17
0.19
0.22
0.24
0.26
0.28
0.30
0.32
0.34
0.37
0.39
0.41
0.43
0.45
0.47
0.50
0.52
0.54
0.56
0.58
0.60
0.62
0.65
0.67
0.69
0.71
0.73
0.75
0.77
0.80
0.82
0.84
0.86
0.88
0.90
0.93
0.95
0.97
0.99
1.01
1.03
1.05
1.08
1.10
1.12
1.14
1.16
1.18
1.21
1.23
1.25
1.27
1.29
1.31
1.33
1.36
1.38
1.40
1.42
1.44
1.46
1.49
1.51
0.21
0.29
0.44
0.87
0.03
0.06
0.09
0.12
0.15
0.18
0.21
0.24
0.27
0.31
0.34
0.37
0.40
0.43
0.46
0.49
0.52
0.55
0.58
0.61
0.64
0.67
0.70
0.73
0.76
0.79
0.82
0.86
0.89
0.92
0.95
0.98
1.01
1.04
1.07
1.10
1.13
1.16
1.19
1.22
1.25
1.28
1.31
1.34
1.37
1.41
1.44
1.47
1.50
1.53
1.56
1.59
1.62
1.65
1.68
1.71
1.74
1.77
1.80
1.83
1.86
1.89
1.92
1.96
1.99
2.02
2.05
2.08
2.11
2.14
RED POWER II
vmax 55 m/s
Where v > 42 m/s,
please consult our
Applications Engineering
Department
0.26
0.36
0.54
1.07
0.04
0.07
0.11
0.15
0.19
0.22
0.26
0.30
0.34
0.37
0.41
0.45
0.49
0.52
0.56
0.60
0.64
0.67
0.71
0.75
0.79
0.82
0.86
0.90
0.94
0.97
1.01
1.05
1.09
1.12
1.16
1.20
1.24
1.27
1.31
1.35
1.39
1.42
1.46
1.50
1.54
1.57
1.61
1.65
1.69
1.72
1.76
1.80
1.84
1.87
1.91
1.95
1.99
2.02
2.06
2.10
2.13
2.17
2.21
2.25
2.28
2.32
2.36
2.40
2.43
2.47
2.51
2.55
2.58
2.62
v (m/s)
Dynamically balanced (for details see DIN 2211)
Pulleys
89
Power Ratings
optibelt RED POWER II Section SPB, 5V/15N, 5V/15J
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 34
nk
(min-1)
140
150
160
180
200
224
250
280
315
335
355
375
400
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
4.02
5.19
7.33
12.11
0.74
1.36
1.94
2.49
3.02
3.52
4.02
4.50
4.96
5.42
5.86
6.29
6.72
7.13
7.54
7.93
8.32
8.69
9.06
9.42
9.77
10.11
10.44
10.77
11.08
11.39
11.68
11.97
12.24
12.51
12.76
13.01
13.24
13.47
13.68
13.89
14.08
14.26
14.43
14.59
14.74
14.87
15.00
15.11
15.20
15.29
15.36
15.42
15.47
15.50
15.52
15.53
15.52
15.50
15.46
4.64
6.02
8.55
14.21
0.84
1.56
2.23
2.86
3.47
4.07
4.64
5.20
5.75
6.28
6.81
7.32
7.82
8.31
8.78
9.25
9.71
10.16
10.59
11.02
11.44
11.84
12.24
12.62
12.99
13.36
13.71
14.05
14.38
14.69
15.00
15.29
15.57
15.84
16.10
16.34
16.57
16.79
16.99
17.18
17.35
17.52
17.66
17.79
17.91
18.01
18.10
18.17
18.22
18.26
18.28
18.29
18.28
18.25
18.20
5.27
6.84
9.75
16.28
0.94
1.75
2.51
3.23
3.93
4.61
5.27
5.91
6.53
7.15
7.75
8.33
8.91
9.47
10.02
10.56
11.09
11.60
12.11
12.60
13.08
13.55
14.00
14.45
14.88
15.29
15.70
16.09
16.47
16.83
17.18
17.52
17.84
18.15
18.44
18.72
18.98
19.23
19.46
19.67
19.87
20.05
20.21
20.35
20.48
20.59
20.68
20.75
20.80
20.84
20.85
20.84
20.82
20.77
20.70
6.50
8.48
12.12
20.29
1.14
2.14
3.07
3.97
4.84
5.68
6.50
7.30
8.09
8.86
9.61
10.35
11.07
11.78
12.47
13.14
13.81
14.45
15.09
15.70
16.30
16.89
17.46
18.01
18.55
19.07
19.57
20.05
20.52
20.96
21.39
21.80
22.19
22.56
22.91
23.24
23.54
23.83
24.09
24.33
24.55
24.74
24.91
25.06
25.18
25.28
25.35
25.39
25.41
25.40
25.36
25.30
25.20
25.08
24.93
7.73
10.09
14.46
24.11
1.34
2.52
3.63
4.70
5.74
6.74
7.73
8.69
9.63
10.55
11.45
12.33
13.20
14.04
14.87
15.68
16.47
17.24
18.00
18.73
19.44
20.13
20.81
21.46
22.09
22.69
23.28
23.84
24.37
24.88
25.37
25.83
26.27
26.68
27.06
27.42
27.74
28.04
28.30
28.54
28.75
28.92
29.06
29.17
29.25
29.29
29.30
29.27
29.21
29.11
28.97
28.80
9.18
12.01
17.21
28.43
1.58
2.98
4.30
5.57
6.81
8.01
9.18
10.33
11.45
12.55
13.63
14.68
15.71
16.72
17.70
18.66
19.60
20.51
21.39
22.25
23.09
23.90
24.67
25.43
26.15
26.84
27.50
28.13
28.73
29.29
29.82
30.32
30.78
31.20
31.59
31.94
32.25
32.52
32.75
32.94
33.08
33.18
33.24
33.25
33.22
33.14
10.74
14.05
20.13
32.78
1.84
3.47
5.02
6.51
7.96
9.37
10.74
12.09
13.41
14.69
15.95
17.18
18.38
19.56
20.70
21.81
22.89
23.94
24.96
25.94
26.88
27.80
28.67
29.51
30.31
31.06
31.78
32.45
33.09
33.67
34.21
34.71
35.15
35.55
35.89
36.19
36.43
36.61
36.74
36.81
36.83
36.79
12.52
16.38
23.41
37.30
2.13
4.03
5.84
7.58
9.27
10.92
12.52
14.09
15.63
17.13
18.59
20.01
21.40
22.75
24.06
25.34
26.57
27.76
28.90
30.00
31.05
32.06
33.01
33.92
34.77
35.56
36.30
36.98
37.61
38.17
38.67
39.10
39.47
39.77
40.00
40.15
40.24
14.57
19.05
27.12
41.87
2.47
4.68
6.78
8.81
10.78
12.70
14.57
16.40
18.18
19.91
21.60
23.24
24.83
26.37
27.86
29.30
30.68
32.00
33.26
34.47
35.60
36.68
37.68
38.61
39.47
40.26
40.96
41.59
42.13
42.59
42.96
43.24
43.42
15.73
20.55
29.18
44.11
2.67
5.05
7.32
9.52
11.64
13.72
15.73
17.70
19.61
21.48
23.29
25.04
26.74
28.38
29.96
31.48
32.93
34.32
35.64
36.88
38.05
39.14
40.14
41.07
41.90
42.65
43.31
43.86
44.32
44.68
44.93
16.88
22.04
31.19
46.05
2.86
5.42
7.86
10.21
12.50
14.72
16.88
18.99
21.04
23.02
24.95
26.82
28.62
30.35
32.02
33.61
35.12
36.56
37.91
39.18
40.37
41.45
42.45
43.34
44.14
44.82
45.40
45.86
46.21
18.02
23.51
33.16
19.44
25.32
35.54
3.05
5.79
8.39
10.91
13.35
15.72
18.02
20.27
22.44
24.55
26.59
28.56
30.46
32.28
34.02
35.67
37.24
38.71
40.10
41.38
42.55
43.63
44.59
45.43
46.16
46.76
47.23
47.57
3.29
6.24
9.06
11.77
14.40
16.96
19.44
21.85
24.18
26.43
28.61
30.70
32.71
34.62
36.44
38.16
39.78
41.28
42.68
43.95
45.10
46.13
47.01
47.76
48.37
48.83
0.33
0.45
0.69
1.35
0.05
0.09
0.14
0.19
0.24
0.28
0.33
0.38
0.43
0.47
0.52
0.57
0.62
0.66
0.71
0.76
0.81
0.85
0.90
0.95
0.99
1.04
1.09
1.14
1.18
1.23
1.28
1.33
1.37
1.42
1.47
1.52
1.56
1.61
1.66
1.71
1.75
1.80
1.85
1.89
1.94
1.99
2.04
2.08
2.13
2.18
2.23
2.27
2.32
2.37
2.42
2.46
2.51
2.56
2.61
0.47
0.64
0.97
1.92
0.07
0.13
0.20
0.27
0.34
0.40
0.47
0.54
0.61
0.67
0.74
0.81
0.87
0.94
1.01
1.08
1.14
1.21
1.28
1.34
1.41
1.48
1.55
1.61
1.68
1.75
1.82
1.88
1.95
2.02
2.08
2.15
2.22
2.29
2.35
2.42
2.49
2.55
2.62
2.69
2.76
2.82
2.89
2.96
3.03
3.09
3.16
3.23
3.29
3.36
3.43
3.50
3.56
3.63
3.70
RED POWER II
0.58
0.78
1.20
2.35
0.08
0.16
0.25
0.33
0.41
0.49
0.58
0.66
0.74
0.82
0.91
0.99
1.07
1.15
1.24
1.32
1.40
1.48
1.57
1.65
1.73
1.81
1.90
1.98
2.06
2.14
2.23
2.31
2.39
2.47
2.56
2.64
2.72
2.80
2.89
2.97
3.05
3.13
3.21
3.30
3.38
3.46
3.54
3.63
3.71
3.79
3.87
3.96
4.04
4.12
4.20
4.29
4.37
4.45
4.53
vmax 55 m/s
Where v > 42 m/s,
please consult our
Applications Engineering
Department
v (m/s)
Dynamically balanced (for details see DIN 2211)
90
Pulleys
Note: Pulley diameters shown are outside diameters for sections 5V/15N, 5V/15J .
Power Ratings
optibelt RED POWER II Section SPC
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 35
nk
(min-1)
224
250
280
315
335
355
375
400
450
500
560
630
710
700
950
1450
2850
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
3300
3350
3400
3450
3500
11.09
14.23
19.73
29.03
1.12
2.07
2.96
3.80
4.61
5.40
6.17
6.92
7.65
8.36
9.06
9.75
10.43
11.09
11.74
12.38
13.01
13.63
14.23
14.83
15.41
15.99
16.56
17.11
17.65
18.19
18.71
19.22
19.73
20.22
20.70
21.17
21.63
22.08
22.51
22.94
23.35
23.76
24.15
24.53
24.90
25.25
25.60
25.93
26.25
26.55
26.84
27.12
27.39
27.64
27.88
28.11
28.32
28.52
28.70
28.87
29.03
29.17
29.29
29.40
29.50
29.58
29.64
29.69
29.72
29.73
29.73
29.71
29.68
29.63
13.84
17.84
24.86
36.59
1.35
2.52
3.62
4.67
5.68
6.67
7.63
8.57
9.49
10.39
11.28
12.15
13.00
13.84
14.67
15.48
16.28
17.07
17.84
18.60
19.35
20.08
20.81
21.51
22.21
22.89
23.56
24.22
24.86
25.49
26.10
26.71
27.29
27.86
28.42
28.97
29.50
30.01
30.51
30.99
31.46
31.91
32.34
32.76
33.16
33.55
33.92
34.27
34.60
34.91
35.21
35.49
35.75
35.99
36.21
36.41
36.59
36.75
36.90
37.02
37.12
37.20
37.25
37.29
37.31
37.30
37.27
37.21
37.14
37.04
16.98
21.94
30.63
44.44
1.63
3.04
4.38
5.66
6.90
8.11
9.30
10.45
11.59
12.71
13.80
14.88
15.94
16.98
18.00
19.01
20.01
20.98
21.94
22.88
23.81
24.72
25.62
26.49
27.36
28.20
29.03
29.84
30.63
31.40
32.16
32.90
33.62
34.32
35.00
35.66
36.30
36.92
37.52
38.11
38.66
39.20
39.72
40.21
40.68
41.13
41.56
41.96
42.33
42.69
43.01
43.32
43.59
43.85
44.07
44.27
44.44
44.59
44.70
44.79
44.85
44.88
44.88
44.85
44.79
44.70
44.58
44.43
44.25
44.03
20.59
26.64
37.14
52.30
1.94
3.64
5.26
6.81
8.32
9.79
11.23
12.64
14.02
15.38
16.72
18.03
19.32
20.59
21.84
23.07
24.28
25.47
26.64
27.79
28.91
30.02
31.10
32.17
33.21
34.22
35.22
36.19
37.14
38.07
38.97
39.84
40.70
41.52
42.32
43.09
43.84
44.56
45.25
45.91
46.55
47.15
47.72
48.27
48.78
49.26
49.71
50.12
50.51
50.85
51.17
51.45
51.69
51.90
52.07
52.20
52.30
52.36
52.38
52.36
52.30
52.20
52.05
51.87
51.64
51.38
22.64
29.28
40.75
56.11
2.12
3.98
5.75
7.46
9.12
10.74
12.32
13.87
15.40
16.89
18.37
19.81
21.24
22.64
24.01
25.36
26.69
28.00
29.28
30.54
31.78
32.99
34.17
35.34
36.47
37.58
38.67
39.72
40.75
41.75
42.73
43.67
44.59
45.47
46.33
47.15
47.94
48.70
49.43
50.12
50.78
51.40
51.99
52.54
53.05
53.53
53.97
54.37
54.73
55.05
55.33
55.57
55.76
55.92
56.03
56.09
56.11
56.08
56.01
55.89
55.73
55.51
24.66
31.90
44.28
59.39
2.30
4.32
6.25
8.11
9.92
11.68
13.41
15.10
16.77
18.40
20.01
21.58
23.14
24.66
26.16
27.63
29.08
30.50
31.90
33.26
34.60
35.92
37.20
38.45
39.68
40.88
42.04
43.18
44.28
45.35
46.39
47.39
48.36
49.30
50.20
51.06
51.89
52.67
53.42
54.13
54.80
55.43
56.01
56.56
57.06
57.52
57.93
58.29
58.61
58.88
59.11
59.28
59.41
59.48
59.50
59.47
59.39
59.26
59.07
26.67
34.48
47.72
29.16
37.66
51.90
34.06
43.88
59.81
38.86
49.88
67.09
44.48
56.80
74.92
50.84
64.44
82.69
57.82
72.55
89.59
2.47
4.66
6.75
8.76
10.71
12.63
14.50
16.33
18.13
19.90
21.64
23.34
25.02
26.67
28.29
29.88
31.44
32.98
34.48
35.95
37.39
38.80
40.18
41.52
42.83
44.11
45.35
46.55
47.72
48.85
49.95
51.00
52.02
52.99
53.93
54.82
55.66
56.47
57.23
57.94
58.60
59.22
59.79
60.31
60.78
61.20
61.56
61.87
62.13
62.33
62.48
62.57
62.60
62.57
62.48
62.33
2.69
5.09
7.36
9.56
11.71
13.80
15.84
17.85
19.82
21.76
23.66
25.53
27.36
29.16
30.93
32.66
34.36
36.03
37.66
39.26
40.82
42.34
43.83
45.27
46.68
48.05
49.37
50.66
51.90
53.09
54.25
55.35
56.41
57.42
58.38
59.29
60.14
60.95
61.70
62.40
63.04
63.62
64.14
64.61
65.01
65.36
65.63
65.85
66.00
66.08
66.10
66.05
3.13
5.93
8.59
11.16
13.67
16.12
18.52
20.87
23.17
25.44
27.66
29.83
31.97
34.06
36.11
38.12
40.09
42.00
43.88
45.70
47.48
49.21
50.89
52.51
54.08
55.60
57.06
58.47
59.81
61.09
62.31
63.47
64.56
65.59
66.54
67.43
68.25
68.99
69.65
70.24
70.75
71.19
71.54
71.80
71.98
72.08
3.57
6.76
9.80
12.75
15.62
18.42
21.16
23.85
26.48
29.06
31.59
34.07
36.49
38.86
41.18
43.44
45.65
47.80
49.88
51.91
53.88
55.77
57.61
59.37
61.06
62.69
64.23
65.70
67.09
68.40
69.62
70.77
71.82
72.78
73.65
74.43
75.11
75.69
76.17
76.54
76.81
76.98
4.09
7.75
11.25
14.64
17.94
21.15
24.30
27.38
30.40
33.34
36.23
39.05
41.80
44.48
47.09
49.63
52.10
54.49
56.80
59.03
61.17
63.22
65.19
67.06
68.84
70.52
72.09
73.56
74.92
76.17
77.31
78.33
79.22
80.00
80.64
81.16
81.54
4.69
8.90
12.93
16.82
20.61
24.31
27.92
31.44
34.89
38.25
41.53
44.72
47.82
50.84
53.76
56.58
59.30
61.92
64.44
66.83
69.12
71.28
73.32
75.23
77.01
78.64
80.14
81.49
82.69
83.74
84.62
85.34
85.90
5.37
10.20
14.82
19.29
23.63
27.86
31.98
36.00
39.92
43.72
47.42
51.01
54.48
57.82
61.04
64.13
67.08
69.89
72.55
75.0
77.40
79.57
81.57
83.40
85.03
86.48
87.72
88.76
89.59
0.90
1.22
1.86
3.67
0.06
0.13
0.26
0.39
0.45
0.51
0.58
0.64
0.71
0.77
0.84
0.90
0.96
1.03
1.09
1.16
1.22
1.29
1.35
1.41
1.48
1.54
1.61
1.67
1.74
1.80
1.86
1.93
1.99
2.06
2.12
2.19
2.25
2.31
2.38
2.44
2.51
2.57
2.64
2.70
2.77
2.83
2.89
2.96
3.02
3.09
3.15
3.22
3.28
3.34
3.41
3.47
3.54
3.60
3.67
3.73
3.79
3.86
3.92
3.99
4.05
4.12
4.18
4.24
4.31
4.37
4.44
4.50
1.28
1.73
2.65
5.20
0.09
0.18
0.37
0.55
0.64
0.73
0.82
0.91
1.00
1.10
1.19
1.28
1.37
1.46
1.55
1.64
1.73
1.83
1.92
2.01
2.10
2.19
2.28
2.37
2.46
2.56
2.65
2.74
2.83
2.92
3.01
3.10
3.19
3.29
3.38
3.47
3.56
3.65
3.74
3.83
3.92
4.02
4.11
4.20
4.29
4.38
4.47
4.56
4.66
4.75
4.84
4.93
5.02
5.11
5.20
5.29
5.39
5.48
5.57
5.66
5.75
5.84
5.93
6.02
6.12
6.21
6.30
6.39
RED POWER II
vmax 55 m/s
Where v > 42 m/s,
please consult our
Applications Engineering
Department
1.57
2.13
3.25
6.38
0.11
0.22
0.45
0.67
0.78
0.90
1.01
1.12
1.23
1.34
1.45
1.57
1.68
1.79
1.90
2.01
2.13
2.24
2.35
2.46
2.57
2.69
2.80
2.91
3.02
3.13
3.25
3.36
3.47
3.58
3.69
3.80
3.92
4.03
4.14
4.25
4.36
4.48
4.59
4.70
4.81
4.92
5.04
5.15
5.26
5.37
5.48
5.60
5.71
5.82
5.93
6.04
6.16
6.27
6.38
6.49
6.60
6.71
6.83
6.94
7.05
7.16
7.27
7.39
7.50
7.61
7.72
7.83
v (m/s)
Dynamically balanced (for details see DIN 2211)
Pulleys
91
Power Ratings
optibelt RED POWER II Section 8V/25N, 8V/25J
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 36
nk
(min-1)
335
355
375
425
450
475
500
530
560
600
630
700
950
1450
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
28.21
35.60
46.12
2.80
5.23
7.50
9.68
11.78
13.81
15.79
17.71
19.58
21.40
23.18
24.90
26.58
28.21
29.79
31.32
32.80
34.23
35.60
36.92
38.19
39.40
40.55
41.64
42.66
43.63
44.53
45.36
46.12
46.82
47.44
47.98
48.46
48.85
49.16
49.40
49.54
49.61
49.59
49.47
49.27
48.98
48.59
48.10
47.51
31.31
39.51
50.96
3.08
5.76
8.28
10.69
13.03
15.29
17.49
19.63
21.71
23.74
25.71
27.63
29.50
31.31
33.07
34.77
36.41
37.99
39.51
40.97
42.36
43.69
44.95
46.14
47.25
48.30
49.26
50.15
50.96
51.68
52.32
52.88
53.34
53.72
54.00
54.18
54.27
54.25
54.13
53.91
53.58
53.14
52.59
51.93
51.15
34.38
43.34
55.57
3.36
6.29
9.05
11.70
14.27
16.76
19.17
21.53
23.82
26.05
28.23
30.34
32.39
34.38
36.30
38.16
39.96
41.69
43.34
44.93
46.44
47.87
49.23
50.50
51.69
52.80
53.82
54.74
55.57
56.31
56.95
57.48
57.91
58.24
58.46
58.56
58.55
58.42
58.18
57.81
57.31
56.69
55.93
55.04
54.02
41.89
52.60
66.08
4.04
7.60
10.98
14.22
17.35
20.40
23.36
26.24
29.04
31.77
34.42
36.99
39.48
41.89
44.21
46.45
48.59
50.64
52.60
54.46
56.21
57.85
59.39
60.81
62.12
63.30
64.36
65.29
66.08
66.74
67.26
67.64
67.87
67.95
67.86
67.62
67.22
66.65
65.90
64.98
45.56
57.04
70.75
4.39
8.26
11.93
15.46
18.88
22.20
25.43
28.57
31.62
34.59
37.47
40.26
42.96
45.56
48.06
50.47
52.77
54.96
57.04
59.01
60.85
62.57
64.16
65.62
66.94
68.12
69.15
70.03
70.75
71.32
71.72
71.95
72.00
71.88
71.57
71.07
70.38
69.49
68.40
67.10
49.17
61.36
75.01
4.73
8.91
12.88
16.70
20.40
24.00
27.49
30.88
34.18
37.38
40.48
43.48
46.38
49.17
51.85
54.41
56.85
59.17
61.36
63.41
65.32
67.10
68.72
70.18
71.49
72.63
73.60
74.39
75.01
75.43
75.66
75.70
75.53
75.15
74.56
52.72
65.54
78.82
5.07
9.56
13.83
17.94
21.92
25.78
29.53
33.18
36.72
40.14
43.46
46.67
49.76
52.72
55.56
58.26
60.83
63.26
65.54
67.66
69.62
71.42
73.04
74.49
75.75
76.82
77.70
78.36
78.82
79.07
79.09
78.87
78.43
77.74
76.80
56.90
70.37
82.80
5.47
10.34
14.96
19.42
23.73
27.91
31.97
35.91
39.73
43.43
46.99
50.43
53.74
56.90
59.91
62.77
65.47
68.01
70.37
72.55
74.54
76.33
77.93
79.31
80.47
81.41
82.12
82.58
82.80
82.76
60.98
74.99
86.09
5.88
11.11
16.09
20.89
25.53
30.02
34.39
38.62
42.71
46.66
50.48
54.14
57.64
60.98
64.16
67.15
69.96
72.58
74.99
77.19
79.18
80.93
82.45
83.72
84.74
85.50
85.98
86.18
86.09
85.70
66.28
80.81
89.34
6.42
12.14
17.59
22.83
27.91
32.82
37.58
42.19
46.64
50.92
55.04
58.97
62.73
66.28
69.64
72.78
75.69
78.37
80.81
82.99
84.91
86.55
87.90
88.95
89.70
90.12
90.20
70.14
84.91
90.88
6.82
12.91
18.71
24.29
29.68
34.90
39.96
44.84
49.54
54.06
58.39
62.52
66.44
70.14
73.61
76.83
79.79
82.49
84.91
87.04
88.86
90.36
91.53
92.36
92.83
92.93
92.64
710
800
79.91 89.95
94.65 103.34
7.88
14.95
21.67
28.13
34.37
40.39
46.19
51.77
57.12
62.23
67.07
71.65
75.93
79.91
83.57
86.89
89.86
92.45
94.65
96.43
97.79
98.70
99.14
99.10
98.55
9.07
17.22
24.96
32.40
39.56
46.44
53.04
59.35
65.35
71.02
76.34
81.28
85.83
89.95
93.62
96.83
99.53
101.71
103.34
104.39
104.83
104.64
1.83
2.48
3.79
0.13
0.26
0.39
0.52
0.65
0.78
0.91
1.05
1.18
1.31
1.44
1.57
1.70
1.83
1.96
2.09
2.22
2.35
2.48
2.61
2.74
2.88
3.01
3.14
3.27
3.40
3.53
3.66
3.79
3.92
4.05
4.18
4.31
4.44
4.57
4.70
4.84
4.97
5.10
5.23
5.36
5.49
5.62
5.75
5.88
2.60 3.18
3.52 4.32
5.38 6.60
0.19 0.23
0.37 0.45
0.56 0.68
0.74 0.91
0.93 1.14
1.11 1.36
1.30 1.59
1.48 1.82
1.67 2.05
1.86 2.27
2.04 2.50
2.23 2.73
2.41 2.96
2.60 3.18
2.78 3.41
2.97 3.64
3.15 3.87
3.34 4.09
3.52 4.32
3.71 4.55
3.90 4.78
4.08 5.00
4.27 5.23
4.45 5.46
4.64 5.69
4.82 5.91
5.01 6.14
5.19 6.37
5.38 6.60
5.57 6.82
5.75 7.05
5.94 7.28
6.12 7.51
6.31 7.73
6.49 7.96
6.68 8.19
6.86 8.42
7.05 8.64
7.23 8.87
7.42 9.10
7.61 9.33
7.79 9.55
7.98 9.78
8.16 10.01
8.35 10.23
RED POWER II
vmax 55 m/s
Where v > 42 m/s,
please consult our
Applications Engineering
Department
v (m/s)
Dynamically balanced (for details see USA Standard RMA/MPTA)
92
Pulleys
Power Ratings
optibelt Super X-POWER M=S Section XPZ, 3VX
Nominal Power Rating PN (kW) for
v (m/s)
Pulleys
Table 37
nk
(min-1)
56
60
63
71
80
85
90
95
100
112
125
140
160
180
200
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5800
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
8200
8400
0.72
0.92
1.27
2.07
0.14
0.26
0.36
0.46
0.55
0.64
0.72
0.80
0.88
0.96
1.03
1.10
1.17
1.24
1.30
1.37
1.43
1.49
1.55
1.61
1.67
1.72
1.78
1.83
1.89
1.94
1.99
2.04
2.09
2.14
2.19
2.23
2.28
2.32
2.37
2.41
2.45
2.50
2.54
2.58
2.61
2.65
2.69
2.73
2.76
2.80
2.83
2.86
2.90
2.93
2.96
2.99
3.02
3.05
3.07
3.10
3.15
3.20
3.24
3.29
3.33
3.36
3.39
3.42
3.45
3.47
3.49
3.50
3.51
3.52
0.84
1.07
1.49
2.46
0.16
0.30
0.42
0.53
0.64
0.74
0.84
0.93
1.02
1.11
1.20
1.28
1.37
1.45
1.53
1.61
1.68
1.76
1.83
1.90
1.97
2.04
2.11
2.18
2.24
2.31
2.37
2.43
2.49
2.55
2.61
2.67
2.73
2.79
2.84
2.90
2.95
3.00
3.05
3.10
3.15
3.20
3.25
3.30
3.34
3.39
3.43
3.47
3.52
3.56
3.60
3.64
3.68
3.71
3.75
3.79
3.86
3.92
3.98
4.04
4.09
4.14
4.19
4.23
4.27
4.31
4.34
4.36
4.39
4.40
0.92
1.18
1.65
2.76
0.18
0.32
0.46
0.58
0.70
0.81
0.92
1.03
1.13
1.23
1.33
1.42
1.52
1.61
1.70
1.78
1.87
1.95
2.04
2.12
2.20
2.28
2.36
2.43
2.51
2.58
2.65
2.72
2.79
2.86
2.93
3.00
3.06
3.13
3.19
3.25
3.32
3.38
3.44
3.49
3.55
3.61
3.66
3.72
3.77
3.82
3.87
3.93
3.97
4.02
4.07
4.12
4.16
4.21
4.25
4.29
4.37
4.45
4.52
4.59
4.66
4.72
4.77
4.83
4.87
4.92
4.96
4.99
5.02
5.04
1.14
1.48
2.08
3.54
0.22
0.39
0.56
0.71
0.86
1.01
1.14
1.28
1.41
1.54
1.66
1.79
1.91
2.03
2.14
2.25
2.37
2.48
2.59
2.69
2.80
2.90
3.00
3.10
3.20
3.30
3.39
3.49
3.58
3.67
3.76
3.85
3.94
4.03
4.11
4.20
4.28
4.36
4.44
4.52
4.60
4.67
4.75
4.82
4.89
4.97
5.03
5.10
5.17
5.24
5.30
5.36
5.43
5.49
5.55
5.60
5.72
5.82
5.92
6.02
6.11
6.20
6.27
6.35
6.41
6.48
6.53
6.58
6.62
6.66
1.39
1.80
2.56
4.39
0.26
0.47
0.67
0.86
1.05
1.22
1.39
1.56
1.72
1.88
2.04
2.19
2.34
2.49
2.63
2.78
2.92
3.06
3.19
3.33
3.46
3.59
3.72
3.84
3.97
4.09
4.21
4.33
4.45
4.57
4.68
4.80
4.91
5.02
5.13
5.23
5.34
5.44
5.54
5.64
5.74
5.84
5.93
6.03
6.12
6.21
6.30
6.38
6.47
6.55
6.63
6.71
6.79
6.87
6.94
7.02
7.16
7.29
7.42
7.54
7.65
7.76
7.85
7.94
8.02
8.10
8.16
8.22
8.26
8.30
1.53
1.98
2.83
4.86
0.28
0.52
0.74
0.95
1.15
1.34
1.53
1.72
1.90
2.07
2.24
2.41
2.58
2.74
2.91
3.06
3.22
3.37
3.53
3.67
3.82
3.97
4.11
4.25
4.39
4.53
4.66
4.80
4.93
5.06
5.18
5.31
5.43
5.56
5.68
5.80
5.91
6.03
6.14
6.25
6.36
6.47
6.57
6.68
6.78
6.88
6.98
7.07
7.17
7.26
7.35
7.44
7.53
7.61
7.69
7.77
7.93
8.07
8.21
8.34
8.46
8.57
8.68
8.77
8.86
8.93
9.00
9.05
9.10
9.13
1.80
2.34
3.35
5.78
0.33
0.61
0.87
1.11
1.35
1.58
1.80
2.02
2.24
2.45
2.65
2.86
3.05
3.25
3.44
3.63
3.82
4.00
4.18
4.36
4.54
4.71
4.88
5.05
5.22
5.38
5.54
5.70
5.86
6.02
6.17
6.32
6.47
6.61
6.76
6.90
7.04
7.17
7.31
7.44
7.57
7.70
7.82
7.94
8.06
8.18
8.30
8.41
8.52
8.63
8.73
8.83
8.93
9.03
9.12
9.22
9.39
9.56
9.71
9.85
9.98
10.10
10.21
10.30
10.39
10.46
10.51
10.56
10.59
10.60
1.94
2.52
3.60
6.24
0.35
0.65
0.93
1.19
1.45
1.70
1.94
2.18
2.41
2.63
2.86
3.07
3.29
3.50
3.71
3.91
4.11
4.31
4.51
4.70
4.89
5.08
5.26
5.45
5.63
5.80
5.98
6.15
6.32
6.49
6.65
6.81
6.97
7.13
7.28
7.44
7.59
7.73
7.88
8.02
8.16
8.29
8.43
8.56
8.68
8.81
8.93
9.05
9.17
9.28
9.39
9.50
9.61
9.71
9.81
9.90
10.09
10.26
10.42
10.56
10.69
10.81
10.91
11.00
11.08
11.14
11.19
11.22
11.23
11.23
2.26
2.94
4.22
7.30
0.41
0.75
1.08
1.39
1.69
1.98
2.26
2.54
2.81
3.08
3.34
3.59
3.84
4.09
4.34
4.58
4.82
5.05
5.28
5.51
5.73
5.95
6.17
6.38
6.59
6.80
7.00
7.20
7.40
7.60
7.79
7.97
8.16
8.34
8.52
8.70
8.87
9.04
9.20
9.36
9.52
9.67
9.83
9.97
10.12
10.26
10.40
10.53
10.66
10.78
10.90
11.02
11.14
11.25
11.35
11.45
11.64
11.82
11.98
12.12
12.24
12.34
12.43
12.49
12.54
12.56
12.57
12.55
12.52
12.46
2.42
3.15
4.52
7.82
0.43
0.80
1.15
1.48
1.81
2.12
2.42
2.72
3.01
3.29
3.57
3.85
4.12
4.39
4.65
4.91
5.16
5.41
5.66
5.90
6.14
6.38
6.61
6.84
7.06
7.29
7.50
7.72
7.93
8.14
8.34
8.54
8.74
8.93
9.12
9.31
9.49
9.67
9.84
10.01
10.18
10.34
10.50
10.65
10.80
10.95
11.09
11.23
11.36
11.49
11.62
11.74
11.85
11.96
12.07
12.17
12.36
12.53
12.69
12.82
12.93
13.01
13.08
13.13
13.15
13.15
13.12
13.08
13.00
12.90
2.61
3.39
4.87
8.42
0.46
0.86
1.24
1.60
1.94
2.28
2.61
2.93
3.24
3.55
3.85
4.15
4.44
4.73
5.01
5.29
5.56
5.83
6.10
6.36
6.62
6.87
7.12
7.37
7.61
7.85
8.08
8.31
8.54
8.76
8.98
9.19
9.40
9.60
9.81
10.00
10.20
10.38
10.57
10.75
10.92
11.09
11.26
11.42
11.58
11.73
11.87
12.02
12.15
12.28
12.41
12.53
12.65
12.76
12.87
12.97
13.15
13.31
13.45
13.56
13.65
13.72
13.76
13.77
13.76
13.72
13.65
13.56
13.43
13.28
3.00
3.91
5.61
9.67
0.53
0.99
1.42
1.83
2.23
2.62
3.00
3.37
3.73
4.09
4.43
4.78
5.11
5.45
5.77
6.09
6.41
6.72
7.02
7.32
7.62
7.91
8.19
8.47
8.75
9.02
9.29
9.55
9.80
10.05
10.29
10.53
10.77
11.00
11.22
11.44
11.65
11.85
12.05
12.25
12.44
12.62
12.79
12.96
13.13
13.28
13.43
13.58
13.71
13.84
13.97
14.08
14.19
14.30
14.39
14.48
14.63
14.75
14.84
14.90
14.92
14.91
14.87
14.79
14.67
3.51
4.58
6.58
11.26
0.62
1.16
1.66
2.15
2.62
3.07
3.51
3.95
4.37
4.79
5.20
5.60
6.00
6.38
6.77
7.14
7.51
7.87
8.22
8.57
8.91
9.25
9.58
9.90
10.22
10.52
10.83
11.12
11.41
11.69
11.96
12.23
12.49
12.74
12.98
13.22
13.44
13.66
13.87
14.08
14.27
14.46
14.63
14.80
14.96
15.11
15.25
15.38
15.50
15.61
15.72
15.81
15.89
15.96
16.02
16.07
16.14
16.16
16.13
16.06
4.02
5.25
7.52
12.77
0.71
1.32
1.90
2.46
2.99
3.51
4.02
4.52
5.01
5.48
5.95
6.41
6.86
7.30
7.74
8.16
8.58
8.99
9.39
9.78
10.16
10.54
10.91
11.26
11.61
11.95
12.29
12.61
12.92
13.22
13.52
13.80
14.08
14.34
14.59
14.83
15.07
15.29
15.50
15.69
15.88
16.05
16.22
16.37
16.50
16.63
16.74
16.84
16.92
17.00
17.05
17.10
17.13
17.14
17.14
17.13
17.06
4.53
5.90
8.44
14.17
0.80
1.49
2.14
2.76
3.37
3.95
4.53
5.08
5.63
6.17
6.69
7.21
7.71
8.20
8.69
9.16
9.62
10.07
10.52
10.95
11.37
11.78
12.18
12.57
12.94
13.31
13.66
14.01
14.34
14.65
14.96
15.25
15.53
15.79
16.04
16.28
16.50
16.71
16.90
17.08
17.24
17.39
17.52
17.63
17.73
17.81
17.87
17.92
17.94
17.95
17.94
17.91
0.06
0.08
0.12
0.23
0.01
0.02
0.02
0.03
0.04
0.05
0.06
0.06
0.07
0.08
0.09
0.10
0.10
0.11
0.12
0.13
0.14
0.14
0.15
0.16
0.17
0.18
0.18
0.19
0.20
0.21
0.22
0.22
0.23
0.24
0.25
0.26
0.26
0.27
0.28
0.29
0.30
0.30
0.31
0.32
0.33
0.34
0.34
0.35
0.36
0.37
0.38
0.38
0.39
0.40
0.41
0.42
0.42
0.43
0.44
0.45
0.46
0.48
0.50
0.51
0.53
0.54
0.56
0.58
0.59
0.61
0.62
0.64
0.66
0.67
0.08
0.11
0.16
0.32
0.01
0.02
0.03
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.14
0.15
0.16
0.17
0.18
0.19
0.20
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.64
0.66
0.68
0.70
0.73
0.75
0.77
0.79
0.82
0.84
0.86
0.89
0.91
0.93
0.95
Statically balanced
SUPER X-POWER
M=S
vmax 55 m/s
0.10
0.13
0.20
0.40
0.01
0.03
0.04
0.06
0.07
0.08
0.10
0.11
0.13
0.14
0.15
0.17
0.18
0.19
0.21
0.22
0.24
0.25
0.26
0.28
0.29
0.31
0.32
0.33
0.35
0.36
0.38
0.39
0.40
0.42
0.43
0.45
0.46
0.47
0.49
0.50
0.52
0.53
0.54
0.56
0.57
0.58
0.60
0.61
0.63
0.64
0.65
0.67
0.68
0.70
0.71
0.72
0.74
0.75
0.77
0.78
0.81
0.84
0.86
0.89
0.92
0.95
0.97
1.00
1.03
1.06
1.09
1.11
1.14
1.17
v (m/s)
Dynamically balanced (for details see DIN 2211)
Note: Pulley diameters shown are outside diameters for sections 3VX.
Pulleys
93
Power Ratings
optibelt Super X-POWER M=S Section XPA
Nominal Power Rating PN (kW) for
v (m/s)
Pulleys
Table 38
nk
(min-1)
71
80
85
95
100
112
118
125
140
160
180
200
224
250
280
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
6100
6200
6300
6400
6500
6600
6700
6800
6900
7000
1.12
1.43
2.01
3.31
0.22
0.39
0.55
0.70
0.85
0.99
1.12
1.25
1.37
1.50
1.61
1.73
1.84
1.95
2.06
2.16
2.27
2.37
2.47
2.56
2.66
2.75
2.84
2.93
3.02
3.10
3.19
3.27
3.35
3.43
3.50
3.58
3.65
3.72
3.79
3.86
3.92
3.99
4.05
4.11
4.17
4.22
4.28
4.33
4.38
4.43
4.48
4.52
4.56
4.60
4.64
4.68
4.72
4.75
4.78
4.81
4.84
4.86
4.88
4.90
4.92
4.94
4.95
4.96
4.97
4.98
4.98
4.99
4.99
4.99
1.55
2.00
2.84
4.85
0.28
0.52
0.75
0.96
1.16
1.36
1.55
1.73
1.91
2.09
2.26
2.43
2.60
2.76
2.92
3.08
3.24
3.39
3.54
3.69
3.83
3.98
4.12
4.26
4.39
4.53
4.66
4.79
4.92
5.04
5.16
5.28
5.40
5.52
5.63
5.74
5.85
5.96
6.06
6.16
6.26
6.36
6.45
6.54
6.63
6.72
6.80
6.88
6.96
7.04
7.11
7.18
7.25
7.32
7.38
7.44
7.50
7.55
7.60
7.65
7.70
7.74
7.78
7.82
7.85
7.88
7.91
7.93
7.95
7.97
1.78
2.31
3.31
5.70
0.32
0.60
0.85
1.10
1.33
1.56
1.78
2.00
2.21
2.42
2.62
2.82
3.02
3.21
3.40
3.59
3.77
3.95
4.13
4.31
4.48
4.65
4.82
4.99
5.15
5.31
5.47
5.62
5.78
5.93
6.07
6.22
6.36
6.50
6.64
6.77
6.90
7.03
7.16
7.28
7.40
7.52
7.63
7.75
7.86
7.96
8.06
8.17
8.26
8.36
8.45
8.54
8.62
8.70
8.78
8.86
8.93
9.00
9.06
9.12
9.18
9.24
9.29
9.34
9.38
9.42
9.46
9.49
9.52
9.55
2.25
2.94
4.22
7.37
0.40
0.74
1.06
1.37
1.67
1.96
2.25
2.53
2.80
3.07
3.33
3.59
3.85
4.10
4.35
4.59
4.83
5.07
5.31
5.54
5.77
5.99
6.21
6.43
6.64
6.86
7.07
7.27
7.47
7.67
7.87
8.06
8.25
8.43
8.62
8.79
8.97
9.14
9.31
9.47
9.63
9.79
9.94
10.09
10.24
10.38
10.52
10.65
10.78
10.91
11.03
11.15
11.26
11.37
11.48
11.58
11.67
11.77
11.85
11.93
12.01
12.09
12.15
12.22
12.28
12.33
12.38
12.42
12.46
12.49
2.48
3.24
4.68
8.20
0.43
0.81
1.17
1.51
1.84
2.16
2.48
2.79
3.09
3.39
3.69
3.98
4.26
4.54
4.82
5.09
5.36
5.63
5.89
6.15
6.40
6.65
6.90
7.14
7.38
7.62
7.85
8.08
8.31
8.53
8.75
8.97
9.18
9.38
9.59
9.79
9.98
10.17
10.36
10.55
10.73
10.90
11.07
11.24
11.40
11.56
11.71
11.86
12.01
12.14
12.28
12.41
12.54
12.66
12.77
12.88
12.99
13.09
13.18
13.27
13.36
13.43
13.51
13.58
13.64
13.69
13.74
13.79
13.83
13.86
3.04
3.98
5.77
10.15
0.52
0.98
1.42
1.84
2.25
2.65
3.04
3.42
3.80
4.17
4.53
4.89
5.24
5.59
5.94
6.28
6.61
6.94
7.27
7.59
7.91
8.22
8.53
8.84
9.14
9.43
9.72
10.01
10.29
10.56
10.84
11.10
11.36
11.62
11.87
12.12
12.36
12.60
12.83
13.05
13.27
13.48
13.69
13.90
14.09
14.28
14.47
14.65
14.82
14.99
15.14
15.30
15.44
15.58
15.72
15.84
15.96
16.08
16.18
16.28
16.37
16.45
16.53
16.60
16.66
16.71
16.75
16.79
16.82
16.84
3.31
4.35
6.31
11.11
0.57
1.07
1.54
2.00
2.45
2.88
3.31
3.73
4.14
4.55
4.95
5.34
5.73
6.12
6.49
6.87
7.23
7.60
7.96
8.31
8.66
9.00
9.34
9.67
10.00
10.32
10.64
10.95
11.26
11.56
11.86
12.15
12.43
12.71
12.99
13.26
13.52
13.77
14.02
14.27
14.50
14.73
14.96
15.18
15.39
15.59
15.79
15.98
16.16
16.34
16.51
16.67
16.82
16.97
17.10
17.23
17.35
17.47
17.57
17.67
17.76
17.84
17.91
17.97
18.02
18.07
18.10
18.13
18.15
18.15
3.63
4.77
6.93
12.21
0.62
1.17
1.69
2.19
2.68
3.16
3.63
4.09
4.55
5.00
5.44
5.87
6.30
6.72
7.14
7.55
7.95
8.35
8.75
9.14
9.52
9.90
10.27
10.64
11.00
11.35
11.70
12.04
12.38
12.71
13.03
13.35
13.66
13.97
14.26
14.56
14.84
15.12
15.39
15.65
15.91
16.15
16.39
16.63
16.85
17.07
17.28
17.48
17.67
17.85
18.03
18.20
18.35
18.50
18.64
18.77
18.89
19.00
19.10
19.19
19.27
19.35
19.41
19.46
19.50
19.53
19.54
19.55
19.55
19.53
4.32
5.68
8.26
14.52
0.73
1.38
2.00
2.60
3.18
3.75
4.32
4.87
5.41
5.94
6.47
6.99
7.50
8.01
8.50
9.00
9.48
9.96
10.43
10.89
11.34
11.79
12.23
12.67
13.09
13.51
13.92
14.33
14.72
15.11
15.49
15.86
16.22
16.57
16.91
17.25
17.57
17.89
18.19
18.49
18.78
19.05
19.32
19.57
19.82
20.05
20.27
20.49
20.69
20.87
21.05
21.21
21.37
21.51
21.63
21.75
21.85
21.94
22.01
22.07
22.12
22.15
22.17
22.17
22.16
22.14
22.10
22.04
21.97
21.89
5.22
6.87
10.00
17.49
0.87
1.66
2.41
3.13
3.84
4.54
5.22
5.89
6.55
7.20
7.83
8.46
9.09
9.70
10.30
10.89
11.48
12.05
12.62
13.17
13.72
14.26
14.78
15.30
15.81
16.30
16.79
17.26
17.72
18.17
18.61
19.04
19.45
19.85
20.24
20.62
20.98
21.33
21.67
21.99
22.30
22.59
22.87
23.13
23.38
23.61
23.82
24.02
24.20
24.36
24.51
24.64
24.75
24.85
24.92
24.98
25.02
25.03
25.03
25.01
24.97
24.90
24.82
24.72
24.59
6.11
8.05
11.71
20.31
1.02
1.94
2.81
3.67
4.50
5.31
6.11
6.90
7.67
8.43
9.18
9.92
10.64
11.36
12.06
12.75
13.43
14.10
14.75
15.40
16.03
16.64
17.25
17.84
18.41
18.97
19.52
20.05
20.57
21.07
21.55
22.02
22.47
22.91
23.32
23.72
24.10
24.46
24.81
25.13
25.43
25.71
25.97
26.21
26.43
26.63
26.80
26.95
27.08
27.18
27.26
27.31
27.34
27.35
27.32
27.27
27.20
27.10
7.00
9.22
13.39
22.98
1.16
2.21
3.22
4.19
5.15
6.08
7.00
7.90
8.78
9.65
10.51
11.35
12.18
12.99
13.79
14.58
15.34
16.10
16.84
17.56
18.26
18.95
19.62
20.28
20.91
21.53
22.12
22.70
23.25
23.79
24.30
24.80
25.26
25.71
26.13
26.53
26.90
27.25
27.58
27.87
28.14
28.38
28.59
28.78
28.93
29.06
29.15
29.22
29.25
29.25
29.21
29.15
8.05
10.60
15.37
25.96
1.33
2.54
3.70
4.82
5.92
6.99
8.05
9.08
10.10
11.10
12.08
13.04
13.99
14.92
15.82
16.71
17.58
18.43
19.26
20.06
20.85
21.61
22.35
23.06
23.75
24.41
25.05
25.66
26.24
26.80
27.32
27.82
28.28
28.71
29.11
29.47
29.81
30.10
30.36
30.59
30.77
30.92
31.03
31.10
31.13
31.12
9.18
12.08
17.46
28.88
1.52
2.89
4.21
5.50
6.75
7.97
9.18
10.35
11.51
12.64
13.75
14.84
15.91
16.95
17.97
18.96
19.93
20.87
21.78
22.66
23.52
24.34
25.13
25.89
26.62
27.31
27.97
28.59
29.17
29.71
30.21
30.68
31.10
31.47
31.80
32.09
32.33
32.52
32.66
32.75
32.79
32.78
10.46
13.76
19.81
31.84
1.73
3.30
4.81
6.27
7.70
9.09
10.46
11.80
13.11
14.39
15.65
16.87
18.07
19.23
20.37
21.47
22.53
23.56
24.55
25.50
26.42
27.29
28.12
28.90
29.64
30.33
30.97
31.56
32.10
32.59
33.02
33.39
33.71
33.96
34.16
34.29
34.35
0.13
0.18
0.27
0.54
0.02
0.04
0.06
0.08
0.09
0.11
0.13
0.15
0.17
0.19
0.21
0.23
0.25
0.27
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.45
0.47
0.49
0.51
0.53
0.55
0.57
0.59
0.61
0.63
0.64
0.66
0.68
0.70
0.72
0.74
0.76
0.78
0.80
0.81
0.83
0.85
0.87
0.89
0.91
0.93
0.95
0.97
0.98
1.00
1.02
1.04
1.06
1.08
1.10
1.12
1.14
1.16
1.17
1.19
1.21
1.23
1.25
1.27
1.29
1.31
1.33
0.19
0.26
0.39
0.77
0.03
0.05
0.08
0.11
0.13
0.16
0.19
0.22
0.24
0.27
0.30
0.32
0.35
0.38
0.40
0.43
0.46
0.48
0.51
0.54
0.56
0.59
0.62
0.65
0.67
0.70
0.73
0.75
0.78
0.81
0.83
0.86
0.89
0.91
0.94
0.97
0.99
1.02
1.05
1.08
1.10
1.13
1.16
1.18
1.21
1.24
1.26
1.29
1.32
1.34
1.37
1.40
1.42
1.45
1.48
1.51
1.53
1.56
1.59
1.61
1.64
1.67
1.69
1.72
1.75
1.77
1.80
1.83
1.86
1.88
Statically balanced
SUPER X-POWER
M=S
vmax 55 m/s
Where v > 42 m/s,
please consult our
Applications Engineering
Department
v (m/s)
Dynamically balanced (for details see DIN 2211)
94
Pulleys
0.23
0.31
0.48
0.94
0.03
0.07
0.10
0.13
0.16
0.20
0.23
0.26
0.30
0.33
0.36
0.40
0.43
0.46
0.49
0.53
0.56
0.59
0.63
0.66
0.69
0.73
0.76
0.79
0.82
0.86
0.89
0.92
0.96
0.99
1.02
1.05
1.09
1.12
1.15
1.19
1.22
1.25
1.29
1.32
1.35
1.38
1.42
1.45
1.48
1.52
1.55
1.58
1.62
1.65
1.68
1.71
1.75
1.78
1.81
1.85
1.88
1.91
1.94
1.98
2.01
2.04
2.08
2.11
2.14
2.18
2.21
2.24
2.27
2.31
Power Ratings
optibelt Super X-POWER M=S Section XPB, 5VX
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 39
nk
(min-1)
112
118
125
140
150
160
180
200
224
250
280
315
400
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
3.32
4.38
6.41
11.36
0.55
1.04
1.52
1.98
2.43
2.88
3.32
3.75
4.17
4.59
5.01
5.42
5.82
6.22
6.61
7.00
7.38
7.76
8.13
8.49
8.85
9.21
9.56
9.90
10.23
10.56
10.89
11.21
11.52
11.82
12.12
12.41
12.69
12.96
13.23
13.49
13.74
13.99
14.22
14.45
14.67
14.88
15.08
15.27
15.45
15.62
15.79
15.94
16.08
16.22
16.34
16.45
16.56
16.65
16.73
16.80
16.85
16.90
16.93
16.96
3.76
4.97
7.29
12.96
0.61
1.17
1.71
2.24
2.75
3.26
3.76
4.25
4.73
5.21
5.69
6.15
6.61
7.07
7.52
7.96
8.40
8.83
9.25
9.67
10.08
10.49
10.89
11.28
11.67
12.04
12.42
12.78
13.13
13.48
13.82
14.15
14.48
14.79
15.10
15.40
15.68
15.96
16.23
16.49
16.74
16.98
17.21
17.43
17.64
17.83
18.02
18.19
18.36
18.51
18.65
18.77
18.89
18.99
19.08
19.15
19.22
19.27
19.30
19.32
4.27
5.66
8.31
14.80
0.69
1.33
1.94
2.54
3.12
3.70
4.27
4.83
5.39
5.93
6.47
7.01
7.54
8.06
8.57
9.08
9.58
10.07
10.56
11.04
11.51
11.98
12.43
12.88
13.32
13.76
14.18
14.59
15.00
15.40
15.79
16.17
16.53
16.89
17.24
17.58
17.91
18.22
18.53
18.82
19.10
19.37
19.63
19.88
20.11
20.33
20.54
20.73
20.91
21.08
21.23
21.37
21.49
21.60
21.69
21.77
21.83
21.88
21.91
21.92
5.36
7.12
10.49
18.67
0.86
1.65
2.42
3.17
3.92
4.64
5.36
6.07
6.78
7.47
8.15
8.83
9.50
10.16
10.81
11.45
12.09
12.71
13.33
13.94
14.53
15.12
15.69
16.26
16.82
17.36
17.89
18.41
18.92
19.42
19.90
20.37
20.83
21.27
21.70
22.11
22.51
22.90
23.26
23.62
23.96
24.28
24.58
24.87
25.14
25.39
25.62
25.84
26.03
26.21
26.37
26.50
26.62
26.72
26.79
26.84
26.88
26.89
26.87
26.84
6.09
8.09
11.92
21.18
0.97
1.87
2.74
3.60
4.44
5.27
6.09
6.90
7.70
8.49
9.27
10.04
10.80
11.55
12.29
13.02
13.74
14.45
15.15
15.84
16.52
17.18
17.83
18.47
19.10
19.71
20.31
20.90
21.47
22.02
22.56
23.08
23.59
24.08
24.56
25.01
25.45
25.87
26.27
26.65
27.01
27.36
27.68
27.98
28.26
28.52
28.75
28.96
29.15
29.32
29.46
29.58
29.67
29.74
29.78
29.80
29.79
29.75
29.68
29.59
6.81
9.06
13.35
23.64
1.08
2.09
3.06
4.02
4.97
5.90
6.81
7.72
8.62
9.50
10.38
11.24
12.09
12.93
13.76
14.58
15.39
16.18
16.96
17.73
18.48
19.22
19.94
20.65
21.35
22.02
22.68
23.33
23.96
24.56
25.15
25.72
26.28
26.81
27.32
27.81
28.28
28.72
29.15
29.55
29.92
30.28
30.60
30.91
31.18
31.44
31.66
31.86
32.02
32.16
32.28
32.36
32.41
32.43
32.42
32.38
32.30
32.20
32.06
31.88
8.26
10.98
16.18
28.40
1.30
2.52
3.70
4.87
6.01
7.14
8.26
9.36
10.44
11.52
12.58
13.62
14.66
15.67
16.67
17.66
18.63
19.58
20.52
21.43
22.33
23.21
24.07
24.90
25.72
26.51
27.28
28.03
28.75
29.45
30.12
30.77
31.39
31.98
32.54
33.07
33.57
34.04
34.48
34.89
35.26
35.60
35.90
36.17
36.40
36.60
36.75
36.87
36.95
36.99
36.99
36.94
36.86
36.73
36.55
36.33
36.07
35.76
9.69
12.89
18.96
32.90
1.52
2.95
4.34
5.71
7.05
8.38
9.69
10.98
12.26
13.52
14.76
15.98
17.19
18.38
19.54
20.69
21.81
22.91
23.99
25.05
26.08
27.08
28.06
29.00
29.92
30.81
31.67
32.50
33.29
34.05
34.78
35.47
36.12
36.73
37.31
37.85
38.34
38.79
39.20
39.57
39.88
40.16
40.38
40.56
40.69
40.77
40.79
40.76
40.68
40.55
40.36
40.11
11.40
15.16
22.25
37.94
1.78
3.46
5.10
6.71
8.29
9.86
11.40
12.92
14.42
15.89
17.35
18.78
20.19
21.57
22.92
24.25
25.54
26.81
28.05
29.25
30.42
31.55
32.65
33.70
34.72
35.70
36.63
37.52
38.36
39.16
39.91
40.60
41.25
41.85
42.39
42.87
43.30
43.66
43.97
44.22
44.40
44.52
44.57
44.56
44.47
44.32
13.24
17.59
25.73
42.92
2.07
4.02
5.92
7.79
9.63
11.45
13.24
15.00
16.73
18.44
20.12
21.76
23.38
24.96
26.50
28.01
29.47
30.90
32.28
33.62
34.92
36.16
37.35
38.49
39.58
40.61
41.58
42.49
43.34
44.12
44.84
45.49
46.06
46.57
47
47.35
47.62
47.81
47.92
47.95
47.88
47.73
15.34
20.36
29.65
47.97
2.39
4.65
6.86
9.03
11.17
13.27
15.34
17.37
19.37
21.34
23.26
25.14
26.98
28.77
30.52
32.21
33.85
35.43
36.96
38.42
39.82
41.15
42.41
43.60
44.71
45.74
46.70
47.57
48.35
49.04
49.64
50.14
50.54
50.85
51.04
51.13
51.11
17.77
23.54
34.07
52.80
2.77
5.40
7.96
10.48
12.95
15.38
17.77
20.11
22.41
24.66
26.85
28.99
31.07
33.09
35.03
36.91
38.72
40.44
42.08
43.64
45.10
46.47
47.75
48.92
49.98
50.93
51.77
52.49
53.09
53.56
53.89
54.09
54.16
23.56
31.02
44.02
3.69
7.19
10.60
13.94
17.22
20.42
23.56
26.61
29.57
32.45
35.22
37.88
40.43
42.86
45.15
47.31
49.32
51.17
52.85
54.37
55.70
56.84
57.79
58.53
59.05
59.35
0.29
0.39
0.59
1.17
0.04
0.08
0.12
0.16
0.20
0.25
0.29
0.33
0.37
0.41
0.45
0.49
0.53
0.57
0.61
0.65
0.70
0.74
0.78
0.82
0.86
0.90
0.94
0.98
1.02
1.06
1.10
1.15
1.19
1.23
1.27
1.31
1.35
1.39
1.43
1.47
1.51
1.55
1.60
1.64
1.68
1.72
1.76
1.80
1.84
1.88
1.92
1.96
2.00
2.05
2.09
2.13
2.17
2.21
2.25
2.29
2.33
2.37
2.41
2.45
0.41
0.55
0.84
1.65
0.06
0.12
0.17
0.23
0.29
0.35
0.41
0.46
0.52
0.58
0.64
0.70
0.75
0.81
0.87
0.93
0.99
1.05
1.10
1.16
1.22
1.28
1.34
1.39
1.45
1.51
1.57
1.63
1.68
1.74
1.80
1.86
1.92
1.97
2.03
2.09
2.15
2.21
2.26
2.32
2.38
2.44
2.50
2.56
2.61
2.67
2.73
2.79
2.85
2.90
2.96
3.02
3.08
3.14
3.19
3.25
3.31
3.37
3.43
3.48
SUPER X-POWER
M=S
0.50
0.68
1.03
2.03
0.07
0.14
0.21
0.28
0.36
0.43
0.50
0.57
0.64
0.71
0.78
0.85
0.93
1.00
1.07
1.14
1.21
1.28
1.35
1.42
1.50
1.57
1.64
1.71
1.78
1.85
1.92
1.99
2.06
2.14
2.21
2.28
2.35
2.42
2.49
2.56
2.63
2.71
2.78
2.85
2.92
2.99
3.06
3.13
3.20
3.28
3.35
3.42
3.49
3.56
3.63
3.70
3.77
3.84
3.92
3.99
4.06
4.13
4.20
4.27
vmax 55 m/s
Where v > 42 m/s,
please consult our
Applications Engineering
Department
v (m/s)
Dynamically balanced (for details see DIN 2211)
Note: Pulley diameters shown are outside diameters for sections 5VX.
Pulleys
95
Power Ratings
optibelt Super X-POWER M=S Section XPC
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 40
nk
(min-1)
180
200
224
250
280
315
400
450
500
560
630
710
700
950
1450
2850
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
3300
3350
3400
3450
3500
10.79
14.40
21.27
37.09
0.85
1.66
2.46
3.24
4.02
4.79
5.56
6.32
7.08
7.83
8.58
9.32
10.06
10.79
11.52
12.25
12.97
13.69
14.40
15.11
15.81
16.51
17.21
17.90
18.58
19.26
19.94
20.61
21.27
21.93
22.58
23.23
23.87
24.50
25.13
25.75
26.37
26.98
27.58
28.17
28.76
29.34
29.91
30.48
31.04
31.59
32.13
32.67
33.19
33.71
34.22
34.72
35.21
35.70
36.17
36.63
37.09
37.54
37.97
38.40
38.81
39.22
39.62
40.00
40.38
40.74
41.09
41.43
41.77
42.08
12.84
17.14
25.27
43.48
1.01
1.97
2.92
3.85
4.78
5.70
6.61
7.52
8.42
9.31
10.20
11.09
11.97
12.84
13.71
14.58
15.44
16.29
17.14
17.98
18.81
19.64
20.47
21.28
22.09
22.90
23.70
24.49
25.27
26.04
26.81
27.57
28.32
29.07
29.80
30.53
31.25
31.96
32.66
33.35
34.03
34.70
35.36
36.02
36.66
37.29
37.91
38.52
39.12
39.70
40.28
40.84
41.39
41.93
42.46
42.98
43.48
43.97
44.44
44.91
45.35
45.79
46.21
46.62
47.01
47.39
47.75
48.10
48.43
48.75
15.29
20.39
29.98
50.58
1.19
2.34
3.47
4.58
5.68
6.78
7.87
8.95
10.02
11.09
12.15
13.20
14.25
15.29
16.33
17.35
18.37
19.39
20.39
21.39
22.38
23.36
24.33
25.30
26.25
27.20
28.14
29.07
29.98
30.89
31.79
32.68
33.55
34.42
35.27
36.11
36.94
37.76
38.57
39.36
40.14
40.90
41.66
42.39
43.12
43.83
44.52
45.20
45.86
46.51
47.14
47.76
48.36
48.94
49.51
50.05
50.58
51.10
51.59
52.06
52.52
52.96
53.37
53.77
54.15
54.50
54.84
55.15
55.45
55.72
17.93
23.88
34.98
57.52
1.40
2.74
4.06
5.37
6.66
7.95
9.22
10.49
11.75
13.00
14.25
15.48
16.71
17.93
19.14
20.34
21.53
22.71
23.88
25.04
26.19
27.33
28.46
29.58
30.69
31.78
32.86
33.93
34.98
36.02
37.05
38.06
39.06
40.04
41.01
41.96
42.90
43.81
44.71
45.60
46.46
47.31
48.14
48.95
49.73
50.50
51.25
51.98
52.68
53.37
54.03
54.67
55.29
55.88
56.45
57.00
57.52
58.02
58.49
58.93
59.35
59.74
60.11
60.45
60.76
61.04
61.29
61.52
61.71
61.87
20.94
27.86
40.60
64.43
1.63
3.20
4.74
6.27
7.79
9.29
10.79
12.27
13.74
15.20
16.65
18.09
19.52
20.94
22.35
23.75
25.13
26.50
27.86
29.20
30.53
31.85
33.14
34.43
35.70
36.95
38.18
39.40
40.60
41.78
42.93
44.07
45.19
46.29
47.37
48.42
49.45
50.46
51.45
52.41
53.34
54.25
55.13
55.99
56.82
57.62
58.39
59.14
59.85
60.53
61.19
61.81
62.40
62.96
63.48
63.97
64.43
64.85
65.23
65.58
65.90
66.17
66.41
66.61
66.77
66.89
66.97
67.01
67.01
66.97
24.43
32.42
46.91
70.83
1.90
3.74
5.54
7.33
9.10
10.86
12.60
14.33
16.05
17.75
19.44
21.12
22.78
24.43
26.06
27.68
29.28
30.86
32.42
33.97
35.50
37.00
38.49
39.95
41.39
42.81
44.20
45.57
46.91
48.23
49.52
50.78
52.01
53.22
54.39
55.53
56.64
57.72
58.76
59.77
60.74
61.68
62.58
63.44
64.26
65.05
65.79
66.49
67.15
67.77
68.35
68.88
69.36
69.80
70.19
70.54
70.83
71.08
71.27
71.42
71.51
71.55
71.54
71.47
71.35
71.17
32.74
43.16
61.06
37.51
49.20
68.47
42.18
55.01
75.11
47.65
61.66
81.94
53.82
68.91
88.17
60.57
76.46
92.72
2.56
5.03
7.47
9.87
12.26
14.63
16.97
19.29
21.59
23.87
26.13
28.36
30.56
32.74
34.88
37.00
39.09
41.14
43.16
45.14
47.08
48.98
50.85
52.66
54.44
56.17
57.85
59.48
61.06
62.59
64.06
65.48
66.84
68.14
69.38
70.55
71.66
72.71
73.69
74.59
75.43
76.19
76.88
77.49
78.03
78.48
78.85
79.14
79.35
79.46
79.49
79.43
2.94
5.79
8.59
11.37
14.11
16.83
19.52
22.18
24.82
27.42
30.00
32.54
35.04
37.51
39.93
42.32
44.66
46.95
49.20
51.39
53.53
55.62
57.65
59.62
61.52
63.36
65.14
66.84
68.47
70.03
71.51
72.91
74.23
75.46
76.61
77.67
78.64
79.52
80.29
80.97
81.55
82.03
82.40
82.66
82.81
82.84
3.33
6.55
9.72
12.85
15.95
19.02
22.05
25.05
28.01
30.94
33.82
36.65
39.44
42.18
44.87
47.49
50.06
52.57
55.01
57.39
59.69
61.91
64.06
66.12
68.10
70.00
71.80
73.50
75.11
76.61
78.02
79.31
80.49
81.56
82.50
83.33
84.03
84.61
85.05
85.36
85.53
85.55
3.79
7.45
11.06
14.63
18.15
21.63
25.07
28.46
31.80
35.09
38.33
41.50
44.61
47.65
50.62
53.51
56.31
59.03
61.66
64.19
66.63
68.96
71.18
73.28
75.27
77.13
78.87
80.47
81.94
83.26
84.44
85.47
86.34
87.05
87.60
87.97
88.17
4.32
8.51
12.62
16.69
20.70
24.66
28.56
32.39
36.17
39.86
43.49
47.02
50.47
53.82
57.07
60.21
63.24
66.14
68.91
71.55
74.05
76.41
78.60
80.64
82.51
84.20
85.71
87.04
88.17
89.10
89.82
90.33
90.62
4.93
9.71
14.40
19.03
23.59
28.08
32.49
36.82
41.06
45.20
49.23
53.14
56.92
60.57
64.08
67.43
70.61
73.63
76.46
79.11
81.55
83.78
85.79
87.58
89.12
90.42
91.46
92.23
92.72
0.49
0.67
1.02
2.00
0.04
0.07
0.11
0.14
0.18
0.21
0.25
0.28
0.32
0.35
0.39
0.42
0.46
0.49
0.53
0.56
0.60
0.63
0.67
0.70
0.74
0.77
0.81
0.84
0.88
0.91
0.95
0.98
1.02
1.05
1.09
1.12
1.16
1.19
1.23
1.26
1.30
1.33
1.37
1.40
1.44
1.47
1.51
1.54
1.58
1.61
1.65
1.68
1.72
1.75
1.79
1.82
1.86
1.89
1.93
1.96
2.00
2.04
2.07
2.11
2.14
2.18
2.21
2.25
2.28
2.32
2.35
2.39
2.42
2.46
0.70
0.95
1.44
2.84
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
0.80
0.85
0.90
0.95
1.00
1.05
1.10
1.15
1.20
1.25
1.29
1.34
1.39
1.44
1.49
1.54
1.59
1.64
1.69
1.74
1.79
1.84
1.89
1.94
1.99
2.04
2.09
2.14
2.19
2.24
2.29
2.34
2.39
2.44
2.49
2.54
2.59
2.64
2.69
2.74
2.79
2.84
2.89
2.94
2.99
3.04
3.09
3.14
3.19
3.24
3.29
3.34
3.39
3.44
3.49
SUPER X-POWER
M=S
vmax 55 m/s
Where v > 42 m/s,
please consult our
Applications Engineering
Department
v (m/s)
Dynamically balanced (for details see DIN 2211)
96
Pulleys
0.85
1.16
1.77
3.48
0.06
0.12
0.18
0.24
0.31
0.37
0.43
0.49
0.55
0.61
0.67
0.73
0.79
0.85
0.92
0.98
1.04
1.10
1.16
1.22
1.28
1.34
1.40
1.47
1.53
1.59
1.65
1.71
1.77
1.83
1.89
1.95
2.02
2.08
2.14
2.20
2.26
2.32
2.38
2.44
2.50
2.56
2.63
2.69
2.75
2.81
2.87
2.93
2.99
3.05
3.11
3.18
3.24
3.30
3.36
3.42
3.48
3.54
3.60
3.66
3.72
3.79
3.85
3.91
3.97
4.03
4.09
4.15
4.21
4.27
Power Ratings
optibelt SUPER TX M=S Section ZX/X10
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 41
nk
(min-1)
40
45
50
56
63
71
80
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5800
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
8200
8400
0.22
0.27
0.36
0.54
0.05
0.09
0.12
0.15
0.17
0.20
0.22
0.24
0.26
0.28
0.30
0.32
0.34
0.36
0.37
0.39
0.40
0.42
0.43
0.44
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.60
0.61
0.62
0.62
0.63
0.64
0.64
0.65
0.65
0.66
0.66
0.67
0.67
0.68
0.68
0.68
0.69
0.69
0.69
0.69
0.70
0.70
0.70
0.71
0.71
0.71
0.71
0.71
0.71
0.70
0.70
0.70
0.69
0.68
0.68
0.27
0.34
0.45
0.69
0.06
0.10
0.14
0.18
0.21
0.24
0.27
0.30
0.32
0.35
0.37
0.40
0.42
0.44
0.46
0.48
0.50
0.52
0.54
0.56
0.57
0.59
0.61
0.62
0.64
0.65
0.67
0.68
0.70
0.71
0.72
0.74
0.75
0.76
0.77
0.78
0.79
0.80
0.81
0.82
0.83
0.84
0.85
0.86
0.87
0.87
0.88
0.89
0.90
0.90
0.91
0.92
0.92
0.93
0.93
0.94
0.95
0.96
0.96
0.97
0.98
0.98
0.98
0.98
0.99
0.99
0.99
0.98
0.98
0.98
0.32
0.40
0.54
0.84
0.07
0.12
0.16
0.21
0.25
0.28
0.32
0.35
0.38
0.41
0.44
0.47
0.50
0.52
0.55
0.58
0.60
0.62
0.65
0.67
0.69
0.71
0.73
0.75
0.77
0.79
0.81
0.83
0.84
0.86
0.88
0.89
0.91
0.93
0.94
0.95
0.97
0.98
1.00
1.01
1.02
1.03
1.05
1.06
1.07
1.08
1.09
1.10
1.11
1.12
1.13
1.14
1.15
1.15
1.16
1.17
1.18
1.20
1.21
1.22
1.23
1.24
1.24
1.25
1.25
1.25
1.26
1.26
1.25
1.25
0.37
0.47
0.64
1.01
0.08
0.14
0.19
0.24
0.29
0.33
0.37
0.41
0.45
0.49
0.52
0.56
0.59
0.62
0.65
0.69
0.71
0.74
0.77
0.80
0.83
0.85
0.88
0.90
0.93
0.95
0.97
0.99
1.02
1.04
1.06
1.08
1.10
1.12
1.14
1.16
1.17
1.19
1.21
1.23
1.24
1.26
1.27
1.29
1.30
1.32
1.33
1.34
1.36
1.37
1.38
1.39
1.40
1.41
1.42
1.43
1.45
1.47
1.49
1.50
1.51
1.52
1.53
1.54
1.55
1.55
1.55
1.56
1.56
1.55
0.44
0.55
0.75
1.20
0.09
0.16
0.22
0.28
0.34
0.39
0.44
0.48
0.53
0.57
0.62
0.66
0.70
0.74
0.77
0.81
0.85
0.88
0.91
0.95
0.98
1.01
1.04
1.07
1.10
1.13
1.16
1.18
1.21
1.24
1.26
1.29
1.31
1.34
1.36
1.38
1.40
1.43
1.45
1.47
1.49
1.51
1.53
1.54
1.56
1.58
1.60
1.61
1.63
1.64
1.66
1.67
1.69
1.70
1.71
1.72
1.75
1.77
1.79
1.81
1.82
1.83
1.84
1.85
1.86
1.86
1.87
1.87
1.87
1.86
0.51
0.64
0.88
1.41
0.10
0.19
0.26
0.33
0.39
0.45
0.51
0.56
0.62
0.67
0.72
0.77
0.81
0.86
0.90
0.95
0.99
1.03
1.07
1.11
1.15
1.19
1.22
1.26
1.29
1.33
1.36
1.39
1.43
1.46
1.49
1.52
1.55
1.57
1.60
1.63
1.66
1.68
1.71
1.73
1.75
1.78
1.80
1.82
1.84
1.86
1.88
1.90
1.92
1.94
1.96
1.97
1.99
2.00
2.02
2.03
2.06
2.08
2.10
2.12
2.14
2.15
2.16
2.17
2.17
2.18
2.18
2.17
2.17
2.16
0.59
0.74
1.02
1.64
0.12
0.21
0.30
0.38
0.45
0.52
0.59
0.65
0.71
0.77
0.83
0.89
0.94
1.00
1.05
1.10
1.15
1.20
1.24
1.29
1.34
1.38
1.42
1.46
1.50
1.54
1.58
1.62
1.66
1.70
1.73
1.77
1.80
1.83
1.86
1.89
1.93
1.95
1.98
2.01
2.04
2.07
2.09
2.12
2.14
2.16
2.18
2.21
2.23
2.25
2.27
2.28
2.30
2.32
2.33
2.35
2.38
2.40
2.42
2.44
2.45
2.46
2.47
2.47
2.47
2.47
2.46
2.45
2.43
2.41
90
100
112
0.67
0.76
0.85
0.85
0.96
1.09
1.18
1.32
1.50
1.88
2.12
2.39
0.14
0.15
0.17
0.24
0.27
0.31
0.34
0.38
0.43
0.43
0.48
0.54
0.51
0.58
0.65
0.60
0.67
0.76
0.67
0.76
0.85
0.75
0.84
0.95
0.82
0.92
1.04
0.89
1.00
1.13
0.95
1.07
1.21
1.02
1.15
1.30
1.08
1.22
1.38
1.14
1.29
1.46
1.20
1.36
1.53
1.26
1.42
1.61
1.32
1.49
1.68
1.38
1.55
1.75
1.43
1.61
1.82
1.48
1.67
1.89
1.53
1.73
1.95
1.59
1.78
2.01
1.63
1.84
2.08
1.68
1.89
2.14
1.73
1.95
2.19
1.78
2.00
2.25
1.82
2.05
2.31
1.86
2.09
2.36
1.91
2.14
2.41
1.95
2.19
2.46
1.99
2.23
2.51
2.03
2.28
2.56
2.07
2.32
2.60
2.10
2.36
2.65
2.14
2.40
2.69
2.17
2.44
2.73
2.21
2.47
2.77
2.24
2.51
2.81
2.27
2.54
2.84
2.30
2.58
2.88
2.33
2.61
2.91
2.36
2.64
2.94
2.39
2.67
2.97
2.42
2.70
3.00
2.44
2.72
3.02
2.47
2.75
3.05
2.49
2.77
3.07
2.52
2.80
3.09
2.54
2.82
3.11
2.56
2.84
3.13
2.58
2.86
3.14
2.60
2.87
3.16
2.61
2.89
3.17
2.63
2.91
3.18
2.65
2.92
3.19
2.66
2.93
3.20
2.69
2.95
3.21
2.71
2.97
3.21
2.72
2.97
3.20
2.74
2.98
3.18
2.74
2.97
3.16
2.75
2.96
3.13
2.74
2.95
3.09
2.74
2.93
3.04
2.73
2.90
2.99
2.71
Where
v
>
30
m/s,
2.69
2.66 please consult our
Applications Engineering
Department
0.02
0.02
0.04
0.07
0.00
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.14
0.14
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.20
0.20
0.21
0.21
SUPER TX M=S
0.03
0.04
0.05
0.11
0.00
0.01
0.01
0.01
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.20
0.20
0.20
0.21
0.21
0.22
0.23
0.24
0.24
0.25
0.26
0.27
0.27
0.28
0.29
0.30
0.30
0.31
0.04
0.05
0.08
0.16
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.05
0.05
0.06
0.06
0.07
0.07
0.08
0.09
0.09
0.10
0.10
0.11
0.11
0.12
0.13
0.13
0.14
0.14
0.15
0.15
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.20
0.21
0.21
0.22
0.22
0.23
0.23
0.24
0.25
0.25
0.26
0.26
0.27
0.27
0.28
0.29
0.29
0.30
0.30
0.31
0.31
0.32
0.33
0.34
0.35
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.45
0.46
0.47
0.48
v (m/s)
Dynamically balanced (for details see DIN 2211)
Pulleys
97
Power Ratings
optibelt SUPER TX M=S Section AX/X13
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 42
nk
(min-1)
63
71
80
90
95
100
106
112
118
125
132
140
150
160
180
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
0.67
0.82
1.05
1.39
0.16
0.27
0.37
0.46
0.54
0.61
0.67
0.74
0.79
0.85
0.90
0.94
0.99
1.03
1.07
1.10
1.14
1.17
1.20
1.23
1.25
1.28
1.30
1.32
1.34
1.35
1.37
1.38
1.39
1.40
1.41
1.42
1.43
1.43
1.43
1.44
1.44
1.43
1.43
1.43
1.42
1.42
1.41
1.40
1.39
1.37
1.36
1.34
1.33
1.31
1.29
1.27
1.25
1.22
1.20
1.17
1.14
1.11
1.08
1.05
0.86
1.06
1.39
1.96
0.19
0.34
0.46
0.57
0.68
0.77
0.86
0.94
1.02
1.10
1.17
1.23
1.30
1.36
1.42
1.47
1.52
1.57
1.62
1.66
1.71
1.75
1.78
1.82
1.85
1.89
1.92
1.94
1.97
2.00
2.02
2.04
2.06
2.07
2.09
2.10
2.11
2.12
2.13
2.14
2.14
2.14
2.15
2.14
2.14
2.14
2.13
2.12
2.11
2.10
2.09
2.07
2.05
2.04
2.01
1.99
1.97
1.94
1.91
1.88
1.07
1.33
1.76
2.58
0.23
0.41
0.56
0.70
0.83
0.95
1.07
1.17
1.28
1.37
1.47
1.56
1.64
1.72
1.80
1.87
1.95
2.01
2.08
2.14
2.20
2.26
2.32
2.37
2.42
2.47
2.51
2.55
2.60
2.63
2.67
2.70
2.74
2.76
2.79
2.82
2.84
2.86
2.88
2.89
2.91
2.92
2.93
2.93
2.94
2.94
2.94
2.94
2.93
2.92
2.91
2.90
2.89
2.87
2.85
2.83
2.80
2.78
2.75
2.72
1.29
1.61
2.16
3.23
0.28
0.49
0.67
0.84
1.00
1.15
1.29
1.42
1.55
1.67
1.79
1.90
2.01
2.11
2.21
2.31
2.40
2.49
2.58
2.66
2.74
2.81
2.89
2.96
3.02
3.09
3.15
3.21
3.26
3.31
3.36
3.41
3.45
3.49
3.53
3.57
3.60
3.63
3.65
3.68
3.70
3.72
3.73
3.74
3.75
3.76
3.76
3.76
3.76
3.75
3.74
3.73
3.71
3.69
3.67
3.64
3.61
3.58
3.55
3.51
1.40
1.76
2.36
3.55
0.30
0.52
0.73
0.91
1.08
1.25
1.40
1.55
1.69
1.82
1.95
2.07
2.19
2.31
2.42
2.52
2.63
2.73
2.82
2.91
3.00
3.08
3.16
3.24
3.32
3.39
3.46
3.52
3.58
3.64
3.70
3.75
3.80
3.84
3.88
3.92
3.96
3.99
4.02
4.05
4.07
4.09
4.11
4.12
4.13
4.14
4.14
4.14
4.13
4.13
4.11
4.10
4.08
4.06
4.03
4.00
3.97
3.93
3.89
3.85
1.51
1.90
2.56
3.86
0.32
0.56
0.78
0.98
1.17
1.34
1.51
1.67
1.82
1.97
2.11
2.24
2.37
2.50
2.62
2.74
2.85
2.96
3.06
3.16
3.26
3.35
3.44
3.52
3.60
3.68
3.76
3.83
3.90
3.96
4.02
4.08
4.13
4.18
4.23
4.27
4.31
4.34
4.38
4.40
4.43
4.45
4.47
4.48
4.49
4.49
4.50
4.49
4.49
4.48
4.46
4.45
4.42
4.40
4.37
4.33
4.29
4.25
4.20
4.15
1.64
2.06
2.79
4.23
0.34
0.61
0.84
1.06
1.27
1.46
1.64
1.81
1.98
2.14
2.30
2.44
2.59
2.72
2.86
2.99
3.11
3.23
3.34
3.45
3.56
3.66
3.76
3.85
3.94
4.03
4.11
4.19
4.26
4.33
4.40
4.46
4.52
4.57
4.62
4.67
4.71
4.75
4.78
4.81
4.84
4.86
4.88
4.89
4.90
4.90
4.90
4.89
4.88
4.87
4.85
4.82
4.79
4.76
4.72
4.68
4.63
4.58
4.52
4.45
1.77
2.23
3.02
4.58
0.37
0.65
0.91
1.14
1.36
1.57
1.77
1.96
2.14
2.31
2.48
2.64
2.80
2.95
3.09
3.23
3.37
3.50
3.62
3.74
3.86
3.97
4.07
4.18
4.27
4.37
4.45
4.54
4.62
4.69
4.77
4.83
4.89
4.95
5.00
5.05
5.10
5.14
5.17
5.20
5.22
5.24
5.26
5.27
5.27
5.27
5.27
5.26
5.24
5.22
5.19
5.16
5.12
5.08
5.03
1.90
2.39
3.25
4.92
0.39
0.70
0.97
1.22
1.46
1.68
1.90
2.10
2.30
2.48
2.66
2.84
3.01
3.17
3.32
3.47
3.62
3.76
3.89
4.02
4.15
4.27
4.38
4.49
4.59
4.69
4.79
4.88
4.96
5.04
5.12
5.19
5.25
5.31
5.37
5.42
5.46
5.50
5.53
5.56
5.59
5.60
5.61
5.62
5.62
5.61
5.60
5.59
5.56
5.53
5.50
5.46
5.41
5.35
5.29
2.04
2.58
3.51
5.31
0.42
0.75
1.04
1.32
1.57
1.81
2.04
2.26
2.48
2.68
2.88
3.06
3.25
3.42
3.59
3.75
3.91
4.06
4.21
4.35
4.48
4.61
4.73
4.85
4.96
5.07
5.17
5.26
5.35
5.44
5.52
5.59
5.66
5.72
5.77
5.82
5.87
5.90
5.93
5.96
5.98
5.99
6.00
6.00
5.99
5.97
5.95
5.92
5.89
5.85
2.19
2.76
3.76
5.68
0.45
0.80
1.11
1.41
1.68
1.94
2.19
2.43
2.65
2.87
3.08
3.29
3.48
3.67
3.85
4.03
4.19
4.36
4.51
4.66
4.80
4.94
5.07
5.20
5.32
5.43
5.53
5.63
5.73
5.82
5.90
5.97
6.04
6.10
6.15
6.20
6.24
6.28
6.30
6.32
6.34
6.34
6.34
6.33
6.31
6.29
6.25
6.21
6.16
6.11
2.35
2.97
4.05
6.09
0.48
0.86
1.20
1.51
1.81
2.09
2.35
2.61
2.86
3.09
3.32
3.54
3.75
3.95
4.14
4.33
4.51
4.69
4.85
5.01
5.17
5.31
5.45
5.58
5.71
5.83
5.94
6.04
6.14
6.23
6.31
6.38
6.45
6.51
6.56
6.61
6.64
6.67
6.69
6.70
6.70
6.70
6.68
6.66
6.63
2.56
3.23
4.40
6.57
0.52
0.93
1.30
1.64
1.96
2.27
2.56
2.84
3.10
3.36
3.61
3.84
4.07
4.29
4.50
4.71
4.90
5.09
5.27
5.44
5.60
5.76
5.91
6.05
6.18
6.30
6.42
6.52
6.62
6.71
6.79
6.86
6.93
6.98
7.03
7.06
7.09
7.11
7.11
7.11
7.10
7.07
7.04
7.00
6.94
2.76
3.49
4.74
7.03
0.56
1.00
1.40
1.77
2.11
2.44
2.76
3.06
3.35
3.62
3.89
4.15
4.39
4.63
4.86
5.07
5.28
5.48
5.67
5.86
6.03
6.19
6.35
6.49
6.63
6.75
6.87
6.98
7.07
7.16
7.24
7.30
7.36
7.41
7.44
7.47
7.48
7.48
7.47
7.45
3.15
3.98
5.41
7.84
0.63
1.14
1.59
2.02
2.41
2.79
3.15
3.50
3.82
4.14
4.44
4.73
5.01
5.28
5.53
5.78
6.01
6.23
6.44
6.64
6.83
7.00
7.16
7.31
7.45
7.58
7.69
7.79
7.88
7.95
8.01
8.06
8.09
8.11
8.11
0.08
0.11
0.17
0.33
0.01
0.02
0.03
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.13
0.14
0.15
0.16
0.17
0.18
0.20
0.21
0.22
0.23
0.24
0.25
0.26
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.44
0.45
0.46
0.47
0.48
0.49
0.51
0.52
0.53
0.54
0.55
0.56
0.57
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.67
0.68
0.69
SUPER TX M=S
0.12
0.16
0.24
0.47
0.02
0.03
0.05
0.07
0.08
0.10
0.12
0.13
0.15
0.17
0.18
0.20
0.22
0.23
0.25
0.26
0.28
0.30
0.31
0.33
0.35
0.36
0.38
0.40
0.41
0.43
0.45
0.46
0.48
0.50
0.51
0.53
0.55
0.56
0.58
0.60
0.61
0.63
0.65
0.66
0.68
0.70
0.71
0.73
0.74
0.76
0.78
0.79
0.81
0.83
0.84
0.86
0.88
0.89
0.91
0.93
0.94
0.96
0.98
0.99
98
Pulleys
0.18
0.24
0.37
0.73
0.03
0.05
0.08
0.10
0.13
0.15
0.18
0.21
0.23
0.26
0.28
0.31
0.33
0.36
0.38
0.41
0.44
0.46
0.49
0.51
0.54
0.56
0.59
0.62
0.64
0.67
0.69
0.72
0.74
0.77
0.80
0.82
0.85
0.87
0.90
0.92
0.95
0.98
1.00
1.03
1.05
1.08
1.10
1.13
1.15
1.18
1.21
1.23
1.26
1.28
1.31
1.33
1.36
1.39
1.41
1.44
1.46
1.49
1.51
1.54
Power Ratings
optibelt SUPER TX M=S Section BX/X17
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 43
nk
(min-1)
90
100
106
112
118
125
132
140
160
180
190
200
212
224
250
280
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
1.70
2.12
2.82
4.16
0.37
0.64
0.89
1.11
1.32
1.51
1.70
1.87
2.04
2.19
2.35
2.49
2.63
2.76
2.89
3.01
3.13
3.24
3.35
3.45
3.55
3.64
3.73
3.82
3.90
3.98
4.05
4.12
4.19
4.25
4.31
4.36
4.41
4.46
4.50
4.54
4.57
4.60
4.63
4.65
4.67
4.68
4.69
4.70
4.70
4.70
4.69
4.68
4.66
4.64
2.01
2.52
3.39
5.06
0.42
0.75
1.04
1.31
1.56
1.79
2.01
2.22
2.42
2.61
2.80
2.98
3.15
3.31
3.47
3.62
3.76
3.90
4.04
4.17
4.29
4.41
4.53
4.63
4.74
4.84
4.93
5.02
5.11
5.19
5.26
5.33
5.39
5.45
5.51
5.56
5.60
5.64
5.68
5.71
5.73
5.75
5.77
5.78
5.78
5.78
5.77
5.76
5.74
5.72
2.20
2.76
3.72
5.59
0.46
0.82
1.13
1.42
1.70
1.95
2.20
2.43
2.65
2.86
3.07
3.26
3.45
3.63
3.81
3.98
4.14
4.30
4.45
4.59
4.73
4.86
4.99
5.11
5.23
5.34
5.44
5.54
5.64
5.73
5.81
5.89
5.96
6.03
6.09
6.14
6.19
6.24
6.27
6.31
6.33
6.35
6.37
6.38
6.38
6.37
6.36
6.35
6.32
6.29
2.38
2.99
4.05
6.10
0.49
0.88
1.22
1.54
1.83
2.11
2.38
2.63
2.87
3.11
3.33
3.55
3.75
3.95
4.14
4.33
4.51
4.68
4.85
5.00
5.16
5.30
5.44
5.58
5.70
5.83
5.94
6.05
6.15
6.25
6.34
6.43
6.50
6.58
6.64
6.70
6.75
6.80
6.84
6.87
6.90
6.92
6.93
6.94
6.93
6.93
6.91
6.89
6.86
6.82
2.56
3.23
4.37
6.60
0.53
0.94
1.31
1.65
1.97
2.27
2.56
2.84
3.10
3.35
3.59
3.83
4.05
4.27
4.48
4.68
4.87
5.06
5.24
5.41
5.58
5.73
5.89
6.03
6.17
6.30
6.43
6.54
6.65
6.76
6.86
6.95
7.03
7.11
7.17
7.24
7.29
7.34
7.38
7.41
7.43
7.45
7.46
7.46
7.45
7.44
7.41
7.38
7.34
7.29
2.77
3.49
4.75
7.16
0.57
1.01
1.41
1.78
2.13
2.46
2.77
3.07
3.36
3.63
3.89
4.15
4.39
4.63
4.86
5.08
5.29
5.49
5.69
5.88
6.06
6.23
6.39
6.55
6.70
6.84
6.98
7.10
7.22
7.33
7.43
7.53
7.62
7.70
7.77
7.83
7.88
7.93
7.96
7.99
8.01
8.02
8.02
8.02
8.00
7.97
7.94
7.89
7.84
7.77
2.98
3.76
5.11
7.70
0.61
1.09
1.52
1.91
2.29
2.64
2.98
3.30
3.61
3.91
4.19
4.47
4.73
4.99
5.23
5.47
5.70
5.92
6.13
6.33
6.53
6.71
6.89
7.06
7.21
7.37
7.51
7.64
7.77
7.88
7.99
8.09
8.18
8.26
8.33
8.39
8.44
8.48
8.51
8.53
8.54
8.55
8.54
8.52
8.49
8.45
8.39
8.33
8.26
8.17
3.21
4.06
5.53
8.30
0.65
1.17
1.63
2.06
2.47
2.85
3.21
3.56
3.90
4.22
4.53
4.83
5.11
5.39
5.66
5.91
6.16
6.40
6.62
6.84
7.05
7.25
7.44
7.62
7.78
7.94
8.09
8.23
8.36
8.48
8.59
8.69
8.78
8.86
8.93
8.98
9.03
9.06
9.08
9.09
9.09
9.08
9.06
9.02
8.97
3.79
4.79
6.53
9.67
0.76
1.37
1.92
2.43
2.90
3.36
3.79
4.20
4.60
4.98
5.35
5.70
6.04
6.37
6.68
6.98
7.27
7.55
7.81
8.06
8.30
8.52
8.74
8.94
9.12
9.30
9.46
9.60
9.73
9.85
9.96
10.05
10.13
10.19
10.23
10.26
10.28
10.28
10.26
10.23
10.18
10.11
10.02
9.92
9.80
4.35
5.51
7.49
10.86
0.87
1.57
2.20
2.78
3.33
3.85
4.35
4.83
5.29
5.72
6.14
6.55
6.94
7.31
7.66
8.00
8.32
8.63
8.92
9.20
9.46
9.70
9.93
10.14
10.33
10.51
10.66
10.80
10.92
11.03
11.11
11.17
11.22
11.24
11.24
11.23
11.19
11.13
11.05
10.94
4.63
5.86
7.95
11.39
0.93
1.67
2.34
2.96
3.54
4.10
4.63
5.14
5.62
6.09
6.53
6.96
7.37
7.76
8.14
8.49
8.83
9.15
9.45
9.74
10.01
10.25
10.48
10.69
10.88
11.06
11.21
11.34
11.44
11.53
11.60
11.64
11.66
11.66
11.63
4.90
6.20
8.40
11.87
0.98
1.76
2.47
3.13
3.75
4.34
4.90
5.44
5.95
6.44
6.91
7.36
7.80
8.21
8.60
8.97
9.32
9.65
9.97
10.26
10.53
10.78
11.01
11.22
11.40
11.57
11.71
11.82
11.92
11.99
12.03
12.05
12.04
12.00
11.94
5.23
6.61
8.94
12.39
1.04
1.88
2.63
3.34
4.00
4.63
5.23
5.80
6.34
6.86
7.36
7.84
8.29
8.73
9.14
9.53
9.89
10.24
10.56
10.86
11.13
11.38
11.61
11.81
11.98
12.13
12.25
12.35
12.42
12.45
5.55
7.01
9.45
12.82
1.11
1.99
2.80
3.54
4.24
4.91
5.55
6.15
6.73
7.28
7.80
8.31
8.78
9.23
9.66
10.07
10.44
10.80
11.12
11.42
11.69
11.94
12.16
12.35
12.51
12.64
12.73
12.80
12.84
12.84
6.22
7.85
10.52
13.51
1.24
2.24
3.14
3.98
4.77
5.51
6.22
6.90
7.54
8.15
8.73
9.28
9.80
10.29
10.74
11.17
11.56
11.92
12.25
12.54
12.80
13.02
13.20
13.35
13.46
13.52
13.55
13.53
13.47
13.37
6.98
8.78
11.66
13.82
1.40
2.52
3.53
4.47
5.36
6.19
6.98
7.73
8.44
9.12
9.75
10.34
10.90
11.42
11.90
12.33
12.73
13.08
13.38
13.64
13.86
14.02
14.14
14.20
14.21
0.12
0.17
0.26
0.50
0.02
0.04
0.05
0.07
0.09
0.11
0.12
0.14
0.16
0.18
0.19
0.21
0.23
0.25
0.26
0.28
0.30
0.32
0.33
0.35
0.37
0.39
0.41
0.42
0.44
0.46
0.48
0.49
0.51
0.53
0.55
0.56
0.58
0.60
0.62
0.63
0.65
0.67
0.69
0.71
0.72
0.74
0.76
0.78
0.79
0.81
0.83
0.85
0.86
0.88
SUPER TX M=S
0.18
0.24
0.37
0.72
0.03
0.05
0.08
0.10
0.13
0.15
0.18
0.20
0.23
0.25
0.28
0.31
0.33
0.36
0.38
0.41
0.43
0.46
0.48
0.51
0.53
0.56
0.58
0.61
0.64
0.66
0.69
0.71
0.74
0.76
0.79
0.81
0.84
0.86
0.89
0.92
0.94
0.97
0.99
1.02
1.04
1.07
1.09
1.12
1.14
1.17
1.19
1.22
1.25
1.27
0.28
0.37
0.57
1.12
0.04
0.08
0.12
0.16
0.20
0.24
0.28
0.32
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.67
0.71
0.75
0.79
0.83
0.87
0.91
0.95
0.99
1.02
1.06
1.10
1.14
1.18
1.22
1.26
1.30
1.34
1.38
1.42
1.46
1.50
1.54
1.58
1.62
1.65
1.69
1.73
1.77
1.81
1.85
1.89
1.93
1.97
Pulleys
99
Power Ratings
optibelt SUPER TX M=S Section CX/X22
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 44
nk
(min-1)
140
150
160
180
200
224
250
280
315
700
950
1450
2850
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
3300
3350
3400
3450
3500
4.81
6.07
8.23
12.16
0.54
0.98
1.38
1.76
2.11
2.45
2.78
3.10
3.40
3.70
3.99
4.27
4.55
4.81
5.08
5.33
5.58
5.83
6.07
6.31
6.54
6.77
6.99
7.21
7.42
7.63
7.83
8.04
8.23
8.43
8.61
8.80
8.98
9.16
9.33
9.50
9.67
9.83
9.99
10.14
10.29
10.44
10.58
10.72
10.85
10.98
11.11
11.23
11.35
11.47
11.58
11.68
11.79
11.89
11.98
12.07
12.16
12.24
12.32
12.39
12.46
12.53
12.59
12.65
12.70
12.75
12.79
12.83
12.87
12.90
5.29
6.68
9.07
13.34
0.59
1.07
1.51
1.92
2.31
2.69
3.05
3.39
3.73
4.06
4.38
4.69
4.99
5.29
5.58
5.86
6.14
6.42
6.68
6.94
7.20
7.45
7.70
7.94
8.17
8.40
8.63
8.85
9.07
9.28
9.49
9.70
9.90
10.09
10.28
10.47
10.65
10.83
11.00
11.17
11.33
11.49
11.65
11.80
11.95
12.09
12.22
12.36
12.48
12.61
12.73
12.84
12.95
13.05
13.15
13.25
13.34
13.42
13.50
13.58
13.65
13.71
13.77
13.83
13.88
13.92
13.96
14.00
14.03
14.05
5.76
7.28
9.89
14.45
0.64
1.16
1.64
2.08
2.51
2.92
3.31
3.69
4.06
4.42
4.76
5.10
5.44
5.76
6.08
6.39
6.69
6.99
7.28
7.57
7.85
8.12
8.39
8.66
8.91
9.17
9.41
9.66
9.89
10.12
10.35
10.57
10.79
11.00
11.21
11.41
11.61
11.80
11.99
12.17
12.34
12.52
12.68
12.84
13.00
13.15
13.29
13.43
13.57
13.70
13.82
13.94
14.05
14.16
14.26
14.36
14.45
14.53
14.61
14.68
14.75
14.81
14.87
14.92
14.96
15.00
15.03
15.05
15.07
15.08
6.69
8.46
11.49
16.45
0.74
1.34
1.89
2.41
2.90
3.37
3.83
4.27
4.70
5.12
5.52
5.92
6.31
6.69
7.06
7.42
7.77
8.12
8.46
8.79
9.12
9.44
9.75
10.06
10.35
10.65
10.93
11.21
11.49
11.75
12.01
12.27
12.51
12.76
12.99
13.22
13.44
13.66
13.87
14.07
14.26
14.45
14.64
14.81
14.98
15.14
15.30
15.44
15.58
15.72
15.84
15.96
16.08
16.18
16.28
16.37
16.45
16.52
16.59
16.65
16.70
16.74
16.77
16.80
16.82
16.83
16.83
16.82
16.81
16.78
7.59
9.61
13.01
18.14
0.83
1.51
2.14
2.72
3.28
3.82
4.34
4.84
5.33
5.81
6.27
6.72
7.16
7.59
8.01
8.42
8.83
9.22
9.61
9.98
10.35
10.71
11.06
11.41
11.75
12.07
12.39
12.71
13.01
13.31
13.60
13.88
14.15
14.42
14.68
14.92
15.16
15.40
15.62
15.84
16.04
16.24
16.43
16.62
16.79
16.95
17.11
17.25
17.39
17.52
17.63
17.74
17.84
17.93
18.01
18.08
18.14
18.19
18.23
18.26
18.27
18.28
18.28
18.26
18.24
8.65
10.94
14.76
19.73
0.94
1.72
2.43
3.10
3.74
4.35
4.94
5.52
6.08
6.62
7.15
7.66
8.16
8.65
9.13
9.60
10.06
10.50
10.94
11.37
11.78
12.19
12.59
12.97
13.35
13.72
14.07
14.42
14.76
15.08
15.40
15.71
16.00
16.29
16.56
16.83
17.08
17.33
17.56
17.78
17.99
18.19
18.38
18.56
18.72
18.87
19.01
19.14
19.26
19.36
19.45
19.53
19.60
19.65
19.69
19.72
19.73
19.73
19.72
19.69
9.77
12.34
16.54
20.88
1.06
1.94
2.74
3.50
4.22
4.91
5.59
6.23
6.86
7.48
8.07
8.65
9.22
9.77
10.31
10.84
11.35
11.85
12.34
12.82
13.28
13.73
14.17
14.59
15.01
15.41
15.80
16.17
16.54
16.89
17.22
17.55
17.86
18.16
18.44
18.71
18.97
19.21
19.44
19.66
19.86
20.04
20.21
20.36
20.50
20.63
20.73
20.82
20.90
20.96
21.00
21.02
21.03
21.02
20.99
11.03
13.89
18.44
21.39
1.20
2.19
3.09
3.95
4.77
5.55
6.31
7.05
7.76
8.45
9.12
9.77
10.41
11.03
11.64
12.22
12.80
13.35
13.89
14.42
14.93
15.42
15.90
16.37
16.81
17.25
17.66
18.06
18.44
18.81
19.16
19.49
19.81
20.11
20.38
20.65
20.89
21.11
21.32
21.50
21.67
21.81
21.94
22.05
22.13
22.19
22.23
22.25
22.25
22.23
12.45
15.62
20.47
20.80
1.35
2.47
3.50
4.47
5.40
6.29
7.14
7.97
8.77
9.55
10.31
11.04
11.76
12.45
13.13
13.78
14.41
15.03
15.62
16.20
16.76
17.29
17.81
18.30
18.78
19.23
19.67
20.08
20.47
20.83
21.18
21.50
21.80
22.07
22.33
22.55
22.75
22.93
23.08
23.20
23.30
23.37
23.41
23.42
23.40
335
355
400
450
500
630
1.53
2.79
3.96
5.06
6.10
7.10
8.07
9.00
9.91
10.78
11.63
12.45
13.25
14.02
14.76
15.48
16.18
16.85
17.50
18.12
18.71
19.28
19.82
20.34
20.83
21.29
21.72
22.12
22.50
22.84
23.15
23.43
23.68
23.90
24.09
1.72
3.15
4.46
5.70
6.88
8.00
9.09
10.14
11.15
12.12
13.07
13.98
14.86
15.70
16.52
17.30
18.06
18.78
19.46
20.12
20.74
21.32
21.87
22.39
22.87
23.31
23.71
24.07
24.39
24.67
24.91
25.11
25.27
25.37
25.44
1.94
3.54
5.01
6.40
7.72
8.98
10.19
11.36
12.48
13.56
14.60
15.60
16.56
17.48
18.36
19.20
20.00
20.76
21.47
22.14
22.76
23.34
23.87
24.35
24.78
25.16
25.49
25.77
25.99
26.15
2.15
3.93
5.56
7.09
8.55
9.94
11.27
12.55
13.78
14.95
16.08
17.16
18.19
19.17
20.10
20.97
21.80
22.57
23.28
23.94
24.53
25.07
25.55
25.96
26.31
2.69
4.90
6.93
8.83
10.62
12.33
13.95
15.49
16.96
18.34
19.65
20.87
22.02
23.07
24.04
24.93
25.71
26.40
26.99
27.48
27.86
28.13
28.28
28.31
28.23
0.23
0.32
0.48
0.95
0.02
0.03
0.05
0.07
0.08
0.10
0.12
0.13
0.15
0.17
0.18
0.20
0.22
0.23
0.25
0.27
0.28
0.30
0.32
0.33
0.35
0.36
0.38
0.40
0.41
0.43
0.45
0.46
0.48
0.50
0.51
0.53
0.55
0.56
0.58
0.60
0.61
0.63
0.65
0.66
0.68
0.70
0.71
0.73
0.75
0.76
0.78
0.80
0.81
0.83
0.85
0.86
0.88
0.90
0.91
0.93
0.95
0.96
0.98
0.99
1.01
1.03
1.04
1.06
1.08
1.09
1.11
1.13
1.14
1.16
SUPER TX M=S
0.33
0.45
0.69
1.36
0.02
0.05
0.07
0.10
0.12
0.14
0.17
0.19
0.22
0.24
0.26
0.29
0.31
0.33
0.36
0.38
0.41
0.43
0.45
0.48
0.50
0.53
0.55
0.57
0.60
0.62
0.65
0.67
0.69
0.72
0.74
0.77
0.79
0.81
0.84
0.86
0.88
0.91
0.93
0.96
0.98
1.00
1.03
1.05
1.08
1.10
1.12
1.15
1.17
1.20
1.22
1.24
1.27
1.29
1.32
1.34
1.36
1.39
1.41
1.43
1.46
1.48
1.51
1.53
1.55
1.58
1.60
1.63
1.65
1.67
v (m/s)
Dynamically balanced (for details see DIN 2211)
100
Pulleys
0.52
0.70
1.07
2.11
0.04
0.07
0.11
0.15
0.19
0.22
0.26
0.30
0.33
0.37
0.41
0.44
0.48
0.52
0.56
0.59
0.63
0.67
0.70
0.74
0.78
0.82
0.85
0.89
0.93
0.96
1.00
1.04
1.07
1.11
1.15
1.19
1.22
1.26
1.30
1.33
1.37
1.41
1.45
1.48
1.52
1.56
1.59
1.63
1.67
1.70
1.74
1.78
1.82
1.85
1.89
1.93
1.96
2.00
2.04
2.08
2.11
2.15
2.19
2.22
2.26
2.30
2.33
2.37
2.41
2.45
2.48
2.52
2.56
2.59
Power Ratings
optibelt VB section 5 raw edge moulded cogged
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 45
nk
(min-1)
16
18
20
22.4
25
28
31.5
33.5
40
45
700
950
1450
2850
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
0.02
0.02
0.03
0.06
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.10
0.02
0.03
0.04
0.07
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.13
0.03
0.04
0.05
0.09
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.13
0.14
0.14
0.14
0.14
0.15
0.15
0.15
0.15
0.16
0.16
0.16
0.16
0.16
0.03
0.04
0.06
0.11
0.01
0.02
0.02
0.02
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.14
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
0.18
0.19
0.19
0.19
0.19
0.20
0.20
0.04
0.05
0.07
0.13
0.01
0.02
0.02
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.14
0.15
0.15
0.16
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.20
0.20
0.20
0.21
0.21
0.21
0.22
0.22
0.22
0.23
0.23
0.23
0.24
0.24
0.04
0.06
0.08
0.15
0.02
0.02
0.03
0.03
0.04
0.04
0.05
0.06
0.06
0.07
0.07
0.08
0.08
0.09
0.09
0.10
0.10
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.20
0.20
0.21
0.21
0.21
0.22
0.22
0.23
0.23
0.24
0.24
0.24
0.25
0.25
0.26
0.26
0.26
0.27
0.27
0.28
0.28
0.28
0.05
0.07
0.10
0.18
0.02
0.02
0.03
0.04
0.05
0.05
0.06
0.06
0.07
0.08
0.08
0.09
0.10
0.10
0.11
0.11
0.12
0.12
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.19
0.19
0.20
0.20
0.21
0.21
0.22
0.22
0.23
0.23
0.24
0.24
0.25
0.25
0.26
0.26
0.27
0.27
0.28
0.28
0.29
0.29
0.30
0.30
0.31
0.31
0.32
0.32
0.33
0.33
0.34
0.06
0.07
0.11
0.19
0.02
0.03
0.03
0.04
0.05
0.06
0.06
0.07
0.08
0.08
0.09
0.10
0.10
0.11
0.12
0.12
0.13
0.13
0.14
0.15
0.15
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.20
0.21
0.21
0.22
0.22
0.23
0.24
0.24
0.25
0.25
0.26
0.26
0.27
0.27
0.28
0.28
0.29
0.30
0.30
0.31
0.31
0.32
0.32
0.33
0.33
0.34
0.34
0.35
0.35
0.36
0.36
0.07
0.09
0.13
0.24
0.02
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.10
0.11
0.12
0.13
0.14
0.14
0.15
0.16
0.17
0.18
0.18
0.19
0.20
0.21
0.21
0.22
0.23
0.24
0.24
0.25
0.26
0.27
0.27
0.28
0.29
0.29
0.30
0.31
0.32
0.32
0.33
0.34
0.34
0.35
0.36
0.36
0.37
0.38
0.38
0.39
0.40
0.40
0.41
0.42
0.42
0.43
0.44
0.44
0.45
0.46
0.08
0.10
0.15
0.28
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.18
0.19
0.20
0.21
0.22
0.23
0.24
0.25
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.31
0.32
0.33
0.34
0.35
0.36
0.36
0.37
0.38
0.39
0.40
0.40
0.41
0.42
0.43
0.44
0.44
0.45
0.46
0.47
0.47
0.48
0.49
0.50
0.50
0.51
0.52
0.53
VB
0.001
0.002
0.002
0.005
0.000
0.001
0.001
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.002
0.002
0.002
0.003
0.003
0.003
0.003
0.003
0.003
0.004
0.004
0.004
0.004
0.004
0.004
0.005
0.005
0.005
0.005
0.005
0.005
0.006
0.006
0.006
0.006
0.006
0.006
0.007
0.007
0.007
0.007
0.007
0.007
0.008
0.008
0.008
0.008
0.008
0.008
0.009
0.009
0.009
0.009
0.009
0.009
0.010
0.010
0.010
0.010
0.002
0.002
0.004
0.007
0.000
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.002
0.003
0.003
0.003
0.003
0.004
0.004
0.004
0.004
0.005
0.005
0.005
0.005
0.006
0.006
0.006
0.006
0.007
0.007
0.007
0.007
0.007
0.008
0.008
0.008
0.008
0.009
0.009
0.009
0.009
0.010
0.010
0.010
0.010
0.011
0.011
0.011
0.011
0.012
0.012
0.012
0.012
0.013
0.013
0.013
0.013
0.014
0.014
0.014
0.014
0.015
0.003
0.004
0.005
0.011
0.001
0.001
0.001
0.002
0.002
0.003
0.003
0.003
0.004
0.004
0.004
0.005
0.005
0.006
0.006
0.006
0.007
0.007
0.007
0.008
0.008
0.009
0.009
0.009
0.010
0.010
0.010
0.011
0.011
0.012
0.012
0.012
0.013
0.013
0.013
0.014
0.014
0.015
0.015
0.015
0.016
0.016
0.016
0.017
0.017
0.018
0.018
0.018
0.019
0.019
0.019
0.020
0.020
0.021
0.021
0.021
0.022
0.022
0.022
v (m/s)
Statically balanced
Pulleys
101
Power Ratings
optibelt VB section Y/6 raw edge moulded cogged
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 46
nk
(min-1)
20
22.4
25
28
31.5
35.5
40
45
50
56
700
950
1450
2850
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
0.03
0.03
0.05
0.08
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.13
0.14
0.14
0.14
0.14
0.03
0.04
0.06
0.11
0.01
0.02
0.02
0.02
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.16
0.16
0.17
0.17
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.19
0.19
0.20
0.20
0.04
0.05
0.08
0.14
0.01
0.02
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.06
0.07
0.07
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.16
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.19
0.20
0.20
0.21
0.21
0.21
0.22
0.22
0.22
0.23
0.23
0.24
0.24
0.24
0.25
0.25
0.25
0.26
0.26
0.05
0.07
0.10
0.18
0.02
0.02
0.03
0.04
0.04
0.05
0.06
0.06
0.07
0.08
0.08
0.09
0.09
0.10
0.11
0.11
0.12
0.12
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.20
0.20
0.21
0.21
0.22
0.22
0.23
0.23
0.24
0.24
0.25
0.25
0.26
0.26
0.27
0.27
0.28
0.28
0.28
0.29
0.29
0.30
0.30
0.31
0.31
0.32
0.32
0.33
0.33
0.06
0.08
0.12
0.22
0.02
0.03
0.04
0.05
0.05
0.06
0.07
0.08
0.09
0.09
0.10
0.11
0.12
0.12
0.13
0.14
0.15
0.15
0.16
0.17
0.17
0.18
0.19
0.19
0.20
0.21
0.22
0.22
0.23
0.24
0.24
0.25
0.25
0.26
0.27
0.27
0.28
0.29
0.29
0.30
0.31
0.31
0.32
0.32
0.33
0.34
0.34
0.35
0.35
0.36
0.36
0.37
0.38
0.38
0.39
0.39
0.40
0.40
0.41
0.08
0.10
0.15
0.27
0.02
0.03
0.05
0.06
0.07
0.08
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.19
0.20
0.21
0.22
0.23
0.24
0.24
0.25
0.26
0.27
0.28
0.29
0.29
0.30
0.31
0.32
0.33
0.33
0.34
0.35
0.36
0.36
0.37
0.38
0.39
0.39
0.40
0.41
0.42
0.42
0.43
0.44
0.44
0.45
0.46
0.47
0.47
0.48
0.49
0.49
0.50
0.09
0.12
0.17
0.32
0.03
0.04
0.05
0.07
0.08
0.09
0.10
0.11
0.12
0.14
0.15
0.16
0.17
0.18
0.19
0.20
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.51
0.52
0.53
0.54
0.55
0.56
0.56
0.57
0.58
0.59
0.60
0.11
0.14
0.20
0.38
0.03
0.05
0.06
0.08
0.09
0.11
0.12
0.13
0.15
0.16
0.17
0.19
0.20
0.21
0.22
0.24
0.25
0.26
0.27
0.29
0.30
0.31
0.32
0.33
0.35
0.36
0.37
0.38
0.39
0.40
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.65
0.66
0.67
0.68
0.69
0.70
0.12
0.16
0.24
0.43
0.04
0.06
0.07
0.09
0.10
0.12
0.14
0.15
0.17
0.18
0.20
0.21
0.23
0.24
0.26
0.27
0.29
0.30
0.32
0.33
0.34
0.36
0.37
0.38
0.40
0.41
0.43
0.44
0.45
0.47
0.48
0.49
0.50
0.52
0.53
0.54
0.55
0.57
0.58
0.59
0.60
0.61
0.63
0.64
0.65
0.66
0.67
0.68
0.70
0.71
0.72
0.73
0.74
0.75
0.76
0.77
0.78
0.79
0.80
0.14
0.18
0.27
0.50
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.19
0.21
0.23
0.25
0.26
0.28
0.30
0.31
0.33
0.35
0.36
0.38
0.40
0.41
0.43
0.44
0.46
0.48
0.49
0.51
0.52
0.54
0.55
0.57
0.58
0.60
0.61
0.62
0.64
0.65
0.67
0.68
0.69
0.71
0.72
0.73
0.75
0.76
0.77
0.79
0.80
0.81
0.82
0.84
0.85
0.86
0.87
0.88
0.89
0.90
0.91
VB
0.003
0.005
0.007
0.014
0.001
0.001
0.002
0.002
0.003
0.003
0.004
0.004
0.005
0.005
0.006
0.006
0.007
0.007
0.008
0.008
0.009
0.009
0.010
0.010
0.011
0.011
0.012
0.012
0.013
0.013
0.014
0.014
0.015
0.015
0.016
0.016
0.017
0.017
0.018
0.018
0.019
0.019
0.020
0.020
0.021
0.021
0.022
0.022
0.023
0.023
0.024
0.024
0.025
0.025
0.026
0.026
0.027
0.027
0.028
0.028
0.029
0.029
0.030
0.005
0.007
0.010
0.020
0.001
0.002
0.003
0.004
0.004
0.005
0.006
0.006
0.007
0.008
0.009
0.009
0.010
0.011
0.011
0.012
0.013
0.014
0.014
0.015
0.016
0.016
0.017
0.018
0.019
0.019
0.020
0.021
0.021
0.022
0.023
0.024
0.024
0.025
0.026
0.026
0.027
0.028
0.029
0.029
0.030
0.031
0.031
0.032
0.033
0.034
0.034
0.035
0.036
0.037
0.037
0.038
0.039
0.039
0.040
0.041
0.042
0.042
0.043
v (m/s)
Statically balanced
102
Pulleys
0.008
0.011
0.016
0.032
0.002
0.003
0.004
0.006
0.007
0.008
0.009
0.010
0.011
0.012
0.013
0.014
0.016
0.017
0.018
0.019
0.020
0.021
0.022
0.023
0.024
0.026
0.027
0.028
0.029
0.030
0.031
0.032
0.033
0.034
0.036
0.037
0.038
0.039
0.040
0.041
0.042
0.043
0.044
0.045
0.047
0.048
0.049
0.050
0.051
0.052
0.053
0.054
0.055
0.057
0.058
0.059
0.060
0.061
0.062
0.063
0.064
0.065
0.067
Power Ratings
optibelt VB section 8
Nominal Power Rating PN (kW) for
v (m/s)
nk
(min-1)
35
40
45
50
56
63
71
80
90
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
0.12
0.15
0.19
0.28
0.03
0.05
0.06
0.08
0.09
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.20
0.20
0.21
0.22
0.22
0.23
0.24
0.24
0.25
0.25
0.26
0.27
0.27
0.27
0.28
0.28
0.29
0.29
0.30
0.30
0.30
0.31
0.31
0.31
0.31
0.32
0.32
0.32
0.32
0.33
0.33
0.33
0.33
0.33
0.33
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.33
0.33
0.33
0.32
0.32
0.15
0.19
0.25
0.38
0.03
0.06
0.08
0.10
0.12
0.13
0.15
0.17
0.18
0.19
0.21
0.22
0.23
0.24
0.26
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.34
0.35
0.36
0.37
0.38
0.38
0.39
0.40
0.40
0.41
0.42
0.42
0.43
0.43
0.44
0.44
0.45
0.45
0.46
0.46
0.47
0.47
0.48
0.48
0.48
0.49
0.49
0.49
0.50
0.50
0.50
0.51
0.51
0.51
0.51
0.51
0.52
0.52
0.52
0.52
0.53
0.53
0.53
0.53
0.53
0.53
0.52
0.18
0.23
0.31
0.48
0.04
0.07
0.09
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.25
0.27
0.29
0.30
0.32
0.33
0.34
0.36
0.37
0.38
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
0.55
0.56
0.57
0.58
0.58
0.59
0.60
0.60
0.61
0.62
0.62
0.63
0.63
0.64
0.64
0.65
0.65
0.66
0.66
0.67
0.67
0.68
0.68
0.68
0.69
0.69
0.70
0.70
0.71
0.71
0.71
0.72
0.72
0.72
0.21
0.27
0.37
0.57
0.04
0.08
0.11
0.14
0.16
0.19
0.21
0.24
0.26
0.28
0.30
0.32
0.34
0.36
0.37
0.39
0.41
0.42
0.44
0.46
0.47
0.49
0.50
0.51
0.53
0.54
0.56
0.57
0.58
0.59
0.60
0.62
0.63
0.64
0.65
0.66
0.67
0.68
0.69
0.70
0.71
0.72
0.73
0.73
0.74
0.75
0.76
0.77
0.77
0.78
0.79
0.79
0.80
0.81
0.81
0.82
0.83
0.83
0.84
0.84
0.85
0.86
0.87
0.87
0.88
0.88
0.89
0.89
0.89
0.89
0.25
0.32
0.43
0.69
0.05
0.09
0.13
0.16
0.19
0.22
0.25
0.28
0.30
0.33
0.35
0.38
0.40
0.42
0.44
0.46
0.48
0.50
0.52
0.54
0.56
0.58
0.60
0.61
0.63
0.65
0.66
0.68
0.69
0.71
0.72
0.74
0.75
0.77
0.78
0.79
0.81
0.82
0.83
0.84
0.85
0.86
0.88
0.89
0.90
0.91
0.92
0.93
0.94
0.94
0.95
0.96
0.97
0.98
0.99
0.99
1.00
1.01
1.01
1.02
1.03
1.04
1.05
1.06
1.07
1.07
1.08
1.08
1.09
1.09
0.29
0.37
0.51
0.81
0.06
0.11
0.15
0.19
0.22
0.26
0.29
0.32
0.35
0.38
0.41
0.44
0.47
0.49
0.52
0.55
0.57
0.59
0.62
0.64
0.66
0.68
0.70
0.73
0.75
0.77
0.79
0.80
0.82
0.84
0.86
0.88
0.89
0.91
0.93
0.94
0.96
0.97
0.99
1.00
1.02
1.03
1.04
1.06
1.07
1.08
1.09
1.10
1.11
1.13
1.14
1.15
1.16
1.17
1.17
1.18
1.19
1.20
1.21
1.22
1.23
1.24
1.25
1.26
1.27
1.28
1.28
1.29
1.29
1.29
0.34
0.43
0.59
0.95
0.07
0.12
0.17
0.22
0.26
0.30
0.34
0.38
0.41
0.45
0.48
0.51
0.55
0.58
0.61
0.64
0.67
0.69
0.72
0.75
0.77
0.80
0.83
0.85
0.87
0.90
0.92
0.94
0.96
0.99
1.01
1.03
1.05
1.07
1.09
1.10
1.12
1.14
1.16
1.17
1.19
1.21
1.22
1.24
1.25
1.27
1.28
1.29
1.31
1.32
1.33
1.34
1.35
1.36
1.38
1.38
1.39
1.40
1.41
1.42
1.43
1.45
1.46
1.47
1.48
1.48
1.48
1.49
1.49
1.48
0.39
0.50
0.69
1.11
0.08
0.14
0.20
0.25
0.30
0.35
0.39
0.43
0.48
0.52
0.56
0.59
0.63
0.67
0.70
0.74
0.77
0.80
0.84
0.87
0.90
0.93
0.96
0.98
1.01
1.04
1.07
1.09
1.12
1.14
1.17
1.19
1.21
1.24
1.26
1.28
1.30
1.32
1.34
1.36
1.38
1.40
1.41
1.43
1.45
1.46
1.48
1.49
1.51
1.52
1.53
1.55
1.56
1.57
1.58
1.59
1.60
1.61
1.62
1.63
1.64
1.65
1.66
1.67
1.67
1.67
1.67
1.67
1.66
1.65
0.45
0.57
0.79
1.27
0.09
0.16
0.23
0.28
0.34
0.40
0.45
0.50
0.55
0.59
0.64
0.68
0.72
0.77
0.81
0.85
0.88
0.92
0.96
0.99
1.03
1.06
1.10
1.13
1.16
1.19
1.22
1.25
1.28
1.31
1.34
1.36
1.39
1.41
1.44
1.46
1.49
1.51
1.53
1.55
1.57
1.59
1.61
1.63
1.65
1.66
1.68
1.69
1.71
1.72
1.74
1.75
1.76
1.77
1.78
1.79
1.80
1.81
1.82
1.82
1.83
1.84
1.84
1.84
1.84
1.84
1.83
1.81
1.80
1.78
VB
Where v > 30 m/s, please consult our
Applications Engineering Department
Statically balanced
Pulleys
Table 47
0.00
0.00
0.00
0.01
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.01
0.01
0.02
0.03
0.00
0.00
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.01
0.02
0.03
0.05
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.14
0.15
0.01
0.02
0.03
0.06
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.12
0.13
0.13
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.17
v (m/s)
Dynamically balanced
Pulleys
103
Power Ratings
optibelt VB section Z/10
Nominal Power Rating PN (kW) for
v (m/s)
nk
(min-1)
45
50
56
63
71
80
90
100
112
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5800
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
8200
8400
0.18
0.22
0.29
0.42
0.04
0.07
0.09
0.12
0.14
0.16
0.18
0.19
0.21
0.23
0.24
0.25
0.27
0.28
0.29
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.39
0.40
0.41
0.42
0.42
0.43
0.44
0.44
0.45
0.46
0.46
0.47
0.47
0.48
0.48
0.48
0.49
0.49
0.49
0.50
0.50
0.50
0.50
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.50
0.50
0.49
0.49
0.48
0.47
0.46
0.45
0.44
0.42
0.41
0.22
0.28
0.38
0.58
0.05
0.08
0.12
0.15
0.17
0.20
0.22
0.25
0.27
0.29
0.31
0.33
0.35
0.37
0.39
0.40
0.42
0.44
0.45
0.47
0.48
0.50
0.51
0.52
0.54
0.55
0.56
0.57
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.66
0.67
0.68
0.68
0.69
0.70
0.71
0.71
0.72
0.73
0.73
0.74
0.74
0.75
0.75
0.76
0.76
0.77
0.77
0.77
0.78
0.78
0.79
0.79
0.79
0.79
0.79
0.79
0.78
0.78
0.77
0.77
0.76
0.75
0.74
0.28
0.35
0.48
0.77
0.06
0.10
0.14
0.18
0.21
0.25
0.28
0.31
0.34
0.37
0.39
0.42
0.45
0.47
0.49
0.52
0.54
0.56
0.59
0.61
0.63
0.65
0.67
0.69
0.70
0.72
0.74
0.76
0.77
0.79
0.81
0.82
0.84
0.85
0.87
0.88
0.90
0.91
0.92
0.93
0.95
0.96
0.97
0.98
0.99
1.00
1.01
1.02
1.03
1.04
1.05
1.05
1.06
1.07
1.08
1.08
1.09
1.10
1.11
1.12
1.12
1.13
1.13
1.13
1.13
1.12
1.12
1.11
1.11
1.10
0.34
0.44
0.60
0.98
0.07
0.12
0.17
0.22
0.26
0.30
0.34
0.38
0.42
0.45
0.49
0.52
0.56
0.59
0.62
0.65
0.68
0.71
0.74
0.77
0.79
0.82
0.85
0.87
0.90
0.92
0.94
0.97
0.99
1.01
1.03
1.06
1.08
1.10
1.12
1.14
1.15
1.17
1.19
1.21
1.22
1.24
1.26
1.27
1.29
1.30
1.32
1.33
1.34
1.35
1.37
1.38
1.39
1.40
1.41
1.42
1.44
1.45
1.47
1.48
1.49
1.49
1.50
1.50
1.50
1.50
1.49
1.49
1.48
1.47
0.42
0.53
0.74
1.22
0.08
0.15
0.21
0.26
0.32
0.37
0.42
0.46
0.51
0.55
0.60
0.64
0.68
0.72
0.76
0.80
0.84
0.87
0.91
0.94
0.98
1.01
1.05
1.08
1.11
1.14
1.17
1.20
1.23
1.26
1.29
1.31
1.34
1.37
1.39
1.42
1.44
1.46
1.49
1.51
1.53
1.55
1.57
1.59
1.61
1.63
1.65
1.67
1.68
1.70
1.71
1.73
1.74
1.76
1.77
1.78
1.80
1.82
1.84
1.85
1.86
1.87
1.88
1.88
1.88
1.88
1.87
1.86
1.85
1.83
0.50
0.64
0.89
1.47
0.10
0.17
0.25
0.31
0.38
0.44
0.50
0.55
0.61
0.66
0.72
0.77
0.82
0.87
0.91
0.96
1.01
1.05
1.10
1.14
1.18
1.22
1.26
1.30
1.34
1.38
1.42
1.46
1.49
1.53
1.56
1.59
1.63
1.66
1.69
1.72
1.75
1.78
1.81
1.83
1.86
1.89
1.91
1.93
1.96
1.98
2.00
2.02
2.04
2.06
2.08
2.10
2.11
2.13
2.14
2.16
2.18
2.20
2.22
2.23
2.24
2.25
2.25
2.25
2.24
2.23
2.22
2.20
2.17
2.15
0.59
0.75
1.06
1.75
0.11
0.20
0.29
0.37
0.44
0.51
0.59
0.65
0.72
0.78
0.85
0.91
0.97
1.03
1.08
1.14
1.19
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.64
1.69
1.73
1.77
1.81
1.85
1.89
1.93
1.97
2.01
2.04
2.08
2.11
2.14
2.17
2.20
2.23
2.26
2.29
2.32
2.34
2.37
2.39
2.41
2.43
2.45
2.47
2.49
2.50
2.52
2.53
2.56
2.57
2.59
2.60
2.60
2.60
2.59
2.58
2.56
2.53
2.50
2.47
0.67
0.86
1.22
2.02
0.13
0.23
0.33
0.42
0.51
0.59
0.67
0.75
0.83
0.90
0.97
1.05
1.11
1.18
1.25
1.31
1.38
1.44
1.50
1.56
1.62
1.68
1.73
1.79
1.84
1.89
1.94
1.99
2.04
2.09
2.14
2.18
2.22
2.27
2.31
2.35
2.39
2.42
2.46
2.49
2.53
2.56
2.59
2.62
2.65
2.67
2.70
2.72
2.75
2.77
2.79
2.80
2.82
2.83
2.85
2.86
2.88
2.89
2.90
2.89
2.88
2.87
2.85
2.82
2.78
0.77
1.00
1.40
2.33
0.15
0.27
0.38
0.48
0.58
0.68
0.77
0.87
0.95
1.04
1.12
1.21
1.29
1.37
1.44
1.52
1.59
1.66
1.73
1.80
1.87
1.94
2.00
2.06
2.12
2.18
2.24
2.30
2.35
2.41
2.46
2.51
2.56
2.60
2.65
2.69
2.74
2.78
2.81
2.85
2.89
2.92
2.95
2.98
3.01
3.04
3.06
3.08
3.10
3.12
3.14
3.15
3.16
3.17
3.18
3.19
3.19
3.19
3.18
3.15
3.12
3.08
3.03
2.97
2.90
VB
Where v > 30 m/s, please consult our
Applications Engineering Department
Statically balanced
Pulleys
Table 48
0.00
0.00
0.01
0.01
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.02
0.02
0.03
0.07
0.00
0.00
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.20
0.20
0.03
0.04
0.06
0.11
0.00
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.05
0.05
0.05
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.12
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.20
0.20
0.20
0.21
0.21
0.22
0.22
0.23
0.24
0.25
0.25
0.26
0.27
0.28
0.28
0.29
0.30
0.31
0.32
0.32
v (m/s)
Dynamically balanced (for details see DIN 2211)
104
Pulleys
0.03
0.04
0.06
0.12
0.00
0.01
0.01
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.08
0.08
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.19
0.20
0.20
0.21
0.21
0.22
0.22
0.23
0.23
0.23
0.24
0.24
0.25
0.26
0.27
0.28
0.29
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.35
0.36
Power Ratings
optibelt VB section A/13
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 49
nk
(min-1)
71
80
90
95
100
106
112
118
125
132
140
150
160
180
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
0.52
0.63
0.81
1.04
0.12
0.21
0.29
0.35
0.41
0.47
0.52
0.57
0.61
0.65
0.69
0.73
0.76
0.79
0.82
0.85
0.88
0.90
0.92
0.94
0.96
0.97
0.99
1.00
1.01
1.02
1.03
1.04
1.04
1.04
1.04
1.04
1.04
1.04
1.03
1.02
1.01
1.00
0.99
0.98
0.96
0.94
0.92
0.90
0.88
0.85
0.83
0.80
0.77
0.73
0.70
0.66
0.62
0.58
0.54
0.50
0.45
0.40
0.35
0.30
0.74
0.92
1.22
1.75
0.16
0.28
0.39
0.48
0.57
0.66
0.74
0.81
0.88
0.95
1.01
1.08
1.14
1.19
1.24
1.30
1.34
1.39
1.44
1.48
1.52
1.55
1.59
1.62
1.66
1.68
1.71
1.74
1.76
1.78
1.80
1.81
1.83
1.84
1.85
1.86
1.86
1.87
1.87
1.87
1.86
1.86
1.85
1.84
1.82
1.81
1.79
1.77
1.75
1.72
1.69
1.66
1.63
1.59
1.55
1.51
1.47
1.42
1.37
1.32
0.97
1.23
1.67
2.51
0.20
0.36
0.50
0.63
0.75
0.86
0.97
1.08
1.18
1.27
1.37
1.46
1.54
1.63
1.71
1.78
1.86
1.93
2.00
2.06
2.12
2.18
2.24
2.30
2.35
2.40
2.45
2.49
2.53
2.57
2.61
2.64
2.67
2.70
2.72
2.74
2.76
2.78
2.79
2.80
2.81
2.81
2.81
2.81
2.80
2.79
2.78
2.76
2.74
2.72
2.69
2.66
2.63
2.59
2.55
2.51
2.46
2.41
2.35
2.29
1.09
1.38
1.89
2.88
0.22
0.39
0.55
0.70
0.84
0.97
1.09
1.21
1.32
1.44
1.54
1.64
1.74
1.84
1.93
2.02
2.11
2.19
2.27
2.35
2.42
2.49
2.56
2.63
2.69
2.75
2.80
2.86
2.91
2.95
3.00
3.04
3.08
3.11
3.14
3.17
3.19
3.21
3.23
3.24
3.25
3.26
3.26
3.26
3.26
3.25
3.24
3.22
3.20
3.18
3.15
3.12
3.08
3.04
3.00
2.95
2.90
2.84
2.78
2.71
1.21
1.53
2.11
3.25
0.24
0.43
0.61
0.77
0.92
1.07
1.21
1.34
1.47
1.59
1.71
1.83
1.94
2.05
2.16
2.26
2.36
2.45
2.54
2.63
2.72
2.80
2.88
2.95
3.02
3.09
3.16
3.22
3.28
3.33
3.38
3.43
3.47
3.51
3.55
3.58
3.61
3.64
3.66
3.67
3.69
3.70
3.70
3.70
3.70
3.69
3.68
3.66
3.64
3.61
3.58
3.55
3.51
3.46
3.41
3.36
3.30
3.23
3.16
3.09
1.35
1.71
2.37
3.67
0.26
0.48
0.67
0.85
1.02
1.19
1.35
1.50
1.64
1.78
1.92
2.05
2.18
2.30
2.42
2.54
2.65
2.76
2.87
2.97
3.06
3.16
3.25
3.33
3.42
3.50
3.57
3.64
3.71
3.77
3.83
3.88
3.93
3.98
4.02
4.06
4.09
4.12
4.15
4.17
4.18
4.19
4.20
4.20
4.19
4.18
4.17
4.15
4.12
4.09
4.06
4.01
3.97
3.91
3.86
3.79
3.72
3.64
3.56
3.47
1.48
1.89
2.62
4.09
0.29
0.52
0.74
0.94
1.13
1.31
1.48
1.65
1.82
1.97
2.13
2.27
2.42
2.55
2.69
2.82
2.95
3.07
3.19
3.30
3.41
3.51
3.61
3.71
3.80
3.89
3.98
4.05
4.13
4.20
4.27
4.33
4.38
4.43
4.48
4.52
4.56
4.59
4.62
4.64
4.65
4.66
4.66
4.66
4.66
4.64
4.62
4.60
4.57
4.53
4.48
4.43
4.38
4.31
4.24
1.62
2.07
2.88
4.50
0.31
0.57
0.80
1.02
1.23
1.43
1.62
1.81
1.99
2.16
2.33
2.49
2.65
2.80
2.95
3.10
3.23
3.37
3.50
3.62
3.75
3.86
3.97
4.08
4.18
4.28
4.37
4.46
4.54
4.62
4.69
4.75
4.82
4.87
4.92
4.96
5.00
5.03
5.06
5.08
5.09
5.10
5.10
5.10
5.08
5.07
5.04
5.01
4.97
4.92
4.86
4.80
4.73
4.66
4.57
1.78
2.28
3.17
4.96
0.34
0.62
0.88
1.12
1.35
1.57
1.78
1.99
2.18
2.38
2.56
2.74
2.92
3.09
3.25
3.41
3.57
3.72
3.86
4.00
4.13
4.26
4.38
4.50
4.61
4.72
4.82
4.92
5.01
5.09
5.17
5.24
5.30
5.36
5.41
5.45
5.49
5.52
5.55
5.57
5.58
5.58
5.57
5.56
5.54
5.51
5.47
5.43
5.38
5.31
1.94
2.49
3.46
5.41
0.37
0.67
0.95
1.21
1.46
1.71
1.94
2.16
2.38
2.59
2.79
2.99
3.19
3.37
3.55
3.73
3.90
4.06
4.22
4.37
4.51
4.65
4.79
4.91
5.03
5.15
5.26
5.36
5.45
5.54
5.62
5.70
5.76
5.82
5.87
5.92
5.95
5.98
6.00
6.01
6.02
6.01
6.00
5.98
5.94
5.90
5.85
5.79
5.72
5.64
2.12
2.72
3.79
5.90
0.40
0.73
1.03
1.32
1.60
1.86
2.12
2.36
2.60
2.83
3.06
3.28
3.49
3.69
3.89
4.08
4.26
4.44
4.62
4.78
4.94
5.09
5.23
5.37
5.50
5.62
5.74
5.85
5.95
6.04
6.12
6.20
6.27
6.32
6.37
6.41
6.44
6.47
6.48
6.48
6.47
6.46
6.43
6.39
6.34
2.34
3.01
4.19
6.48
0.44
0.80
1.14
1.46
1.76
2.06
2.34
2.61
2.88
3.13
3.38
3.62
3.86
4.08
4.30
4.51
4.72
4.91
5.10
5.28
5.46
5.62
5.78
5.93
6.06
6.20
6.32
6.43
6.53
6.63
6.71
6.79
6.85
6.90
6.95
6.98
7.00
7.01
7.01
6.99
6.97
6.93
6.88
6.82
6.74
2.56
3.29
4.59
7.03
0.48
0.87
1.24
1.59
1.93
2.25
2.56
2.86
3.15
3.43
3.70
3.97
4.22
4.47
4.71
4.94
5.16
5.37
5.58
5.77
5.96
6.13
6.30
6.46
6.60
6.74
6.86
6.98
7.08
7.18
7.26
7.33
7.38
7.43
7.46
7.48
7.48
7.47
7.45
7.42
7.37
2.99
3.85
5.36
8.03
0.55
1.02
1.45
1.86
2.25
2.63
2.99
3.34
3.69
4.01
4.33
4.64
4.94
5.22
5.50
5.76
6.02
6.26
6.49
6.71
6.91
7.10
7.28
7.45
7.60
7.74
7.87
7.98
8.07
8.15
8.21
8.26
8.29
8.30
8.30
VB
0.08
0.10
0.16
0.31
0.01
0.02
0.03
0.04
0.05
0.06
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.32
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.61
0.62
0.63
0.64
0.65
0.12
0.16
0.25
0.49
0.02
0.03
0.05
0.07
0.09
0.10
0.12
0.14
0.16
0.17
0.19
0.21
0.22
0.24
0.26
0.28
0.29
0.31
0.33
0.35
0.36
0.38
0.40
0.42
0.43
0.45
0.47
0.48
0.50
0.52
0.54
0.55
0.57
0.59
0.61
0.62
0.64
0.66
0.67
0.69
0.71
0.73
0.74
0.76
0.78
0.80
0.81
0.83
0.85
0.87
0.88
0.90
0.92
0.93
0.95
0.97
0.99
1.00
1.02
1.04
0.14
0.18
0.28
0.55
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.19
0.21
0.23
0.25
0.27
0.29
0.31
0.33
0.35
0.37
0.39
0.41
0.43
0.45
0.47
0.49
0.51
0.53
0.54
0.56
0.58
0.60
0.62
0.64
0.66
0.68
0.70
0.72
0.74
0.76
0.78
0.80
0.82
0.84
0.86
0.88
0.89
0.91
0.93
0.95
0.97
0.99
1.01
1.03
1.05
1.07
1.09
1.11
1.13
1.15
1.17
Pulleys
105
Power Ratings
optibelt VB section B/17
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 50
nk
(min-1)
112
125
132
140
150
160
170
180
190
200
212
224
236
250
280
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
1.49
1.83
2.37
2.99
0.33
0.58
0.79
0.99
1.17
1.33
1.49
1.63
1.77
1.89
2.01
2.12
2.23
2.33
2.42
2.50
2.58
2.65
2.72
2.77
2.82
2.87
2.91
2.94
2.96
2.98
2.99
2.99
2.98
2.97
2.95
2.92
2.89
2.85
2.80
2.74
2.67
2.59
2.51
2.42
2.31
2.20
2.08
1.95
1.82
1.67
1.51
1.34
1.16
0.97
1.96
2.45
3.25
4.37
0.41
0.73
1.01
1.27
1.52
1.74
1.96
2.16
2.35
2.54
2.71
2.88
3.03
3.18
3.32
3.45
3.57
3.69
3.79
3.89
3.98
4.06
4.14
4.20
4.25
4.30
4.34
4.36
4.38
4.39
4.39
4.37
4.35
4.32
4.27
4.22
4.15
4.08
3.99
3.89
3.78
3.65
3.52
3.37
3.21
3.03
2.85
2.65
2.43
2.20
2.21
2.77
3.72
5.08
0.46
0.81
1.13
1.43
1.70
1.96
2.21
2.44
2.67
2.88
3.08
3.28
3.46
3.63
3.80
3.95
4.10
4.24
4.36
4.48
4.59
4.69
4.78
4.86
4.93
4.98
5.03
5.07
5.10
5.11
5.12
5.11
5.09
5.06
5.01
4.96
4.89
4.80
4.71
4.60
4.48
4.34
4.19
4.02
3.84
3.65
3.44
3.21
2.97
2.71
2.50
3.15
4.24
5.87
0.51
0.91
1.27
1.60
1.92
2.21
2.50
2.77
3.02
3.27
3.50
3.73
3.94
4.14
4.33
4.52
4.69
4.85
5.00
5.14
5.27
5.39
5.49
5.59
5.67
5.74
5.80
5.85
5.88
5.90
5.91
5.90
5.88
5.85
5.80
5.74
5.66
5.57
5.46
5.34
5.19
5.04
4.86
4.67
4.46
2.85
3.61
4.89
6.80
0.57
1.02
1.43
1.82
2.18
2.52
2.85
3.16
3.46
3.75
4.02
4.28
4.53
4.77
5.00
5.21
5.41
5.60
5.78
5.94
6.09
6.23
6.36
6.47
6.57
6.65
6.72
6.77
6.81
6.84
6.84
6.83
6.81
6.77
6.71
6.63
6.53
6.42
6.29
6.13
5.96
5.77
5.56
5.32
5.07
3.20
4.06
5.52
7.67
0.63
1.14
1.60
2.03
2.44
2.83
3.20
3.56
3.90
4.22
4.53
4.83
5.12
5.39
5.65
5.89
6.12
6.34
6.54
6.72
6.90
7.05
7.19
7.32
7.43
7.52
7.59
7.65
7.69
7.71
7.71
7.69
7.65
7.59
7.52
7.41
7.29
7.15
6.98
6.79
3.55
4.51
6.14
8.49
0.69
1.25
1.77
2.25
2.70
3.13
3.55
3.95
4.33
4.69
5.04
5.37
5.69
6.00
6.28
6.56
6.81
7.05
7.27
7.48
7.67
7.84
7.99
8.13
8.24
8.34
8.41
8.47
8.50
8.51
8.50
8.47
8.41
8.33
8.22
8.09
7.93
7.75
7.54
7.31
3.89
4.96
6.75
9.24
0.75
1.37
1.93
2.46
2.96
3.44
3.89
4.33
4.75
5.16
5.54
5.91
6.26
6.59
6.91
7.21
7.49
7.75
7.99
8.21
8.42
8.60
8.76
8.90
9.02
9.11
9.18
9.23
9.25
9.25
9.22
9.16
9.08
8.96
8.82
4.24
5.40
7.35
9.93
0.81
1.48
2.09
2.67
3.22
3.74
4.24
4.72
5.17
5.61
6.03
6.44
6.82
7.18
7.52
7.85
8.15
8.43
8.69
8.92
9.14
9.33
9.49
9.63
9.75
9.83
9.90
9.93
9.93
9.91
9.85
9.77
9.65
9.50
9.31
4.58
5.83
7.94
10.56
0.87
1.59
2.25
2.88
3.47
4.03
4.58
5.09
5.59
6.07
6.52
6.95
7.37
7.76
8.12
8.47
8.79
9.09
9.36
9.61
9.83
10.02
10.19
10.32
10.43
10.51
10.55
10.57
10.55
10.49
10.41
10.28
10.12
9.92
9.68
4.98
6.35
8.63
11.22
0.94
1.73
2.45
3.13
3.77
4.39
4.98
5.55
6.09
6.60
7.10
7.57
8.01
8.43
8.83
9.20
9.54
9.85
10.14
10.39
10.62
10.81
10.97
11.10
11.19
11.25
11.27
11.25
11.19
11.09
5.38
6.86
9.31
11.78
1.01
1.86
2.64
3.37
4.07
4.74
5.38
5.99
6.57
7.13
7.66
8.17
8.64
9.09
9.51
9.90
10.26
10.58
10.88
11.14
11.36
11.55
11.70
11.81
11.88
11.90
11.89
11.83
11.73
11.58
5.78
7.36
9.96
12.24
1.08
1.99
2.83
3.62
4.37
5.09
5.78
6.43
7.06
7.65
8.22
8.76
9.26
9.74
10.18
10.58
10.95
11.29
11.58
11.84
12.06
12.23
12.36
12.45
12.49
12.48
12.42
12.31
12.15
11.93
6.23
7.94
10.70
12.62
1.17
2.15
3.05
3.91
4.72
5.49
6.23
6.94
7.61
8.25
8.86
9.43
9.97
10.47
10.93
11.35
11.73
12.07
12.36
12.61
12.81
12.96
13.06
13.11
13.10
7.19
9.14
12.20
12.90
1.34
2.47
3.52
4.51
5.45
6.34
7.19
8.00
8.77
9.50
10.18
10.82
11.41
11.95
12.44
12.88
13.26
13.59
13.85
14.06
14.19
14.26
14.26
14.19
14.04
VB
0.17
0.23
0.35
0.69
0.02
0.05
0.07
0.10
0.12
0.14
0.17
0.19
0.22
0.24
0.27
0.29
0.31
0.34
0.36
0.39
0.41
0.43
0.46
0.48
0.51
0.53
0.56
0.58
0.60
0.63
0.65
0.68
0.70
0.72
0.75
0.77
0.80
0.82
0.84
0.87
0.89
0.92
0.94
0.97
0.99
1.01
1.04
1.06
1.09
1.11
1.13
1.16
1.18
1.21
0.27
0.37
0.56
1.10
0.04
0.08
0.12
0.15
0.19
0.23
0.27
0.31
0.35
0.39
0.42
0.46
0.50
0.54
0.58
0.62
0.66
0.70
0.73
0.77
0.81
0.85
0.89
0.93
0.97
1.00
1.04
1.08
1.12
1.16
1.20
1.24
1.27
1.31
1.35
1.39
1.43
1.47
1.51
1.55
1.58
1.62
1.66
1.70
1.74
1.78
1.82
1.85
1.89
1.93
106
Pulleys
0.30
0.41
0.63
1.24
0.04
0.09
0.13
0.17
0.22
0.26
0.30
0.35
0.39
0.43
0.48
0.52
0.56
0.61
0.65
0.69
0.74
0.78
0.82
0.87
0.91
0.96
1.00
1.04
1.09
1.13
1.17
1.22
1.26
1.30
1.35
1.39
1.43
1.48
1.52
1.56
1.61
1.65
1.69
1.74
1.78
1.82
1.87
1.91
1.95
2.00
2.04
2.08
2.13
2.17
Power Ratings
optibelt VB section C/22
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 51
nk
(min-1)
180
200
700
950
1450
2850
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
4.51
5.60
7.23
7.54
0.53
0.95
1.34
1.69
2.03
2.35
2.66
2.95
3.23
3.51
3.77
4.03
4.27
4.51
4.74
4.97
5.18
5.39
5.60
5.79
5.98
6.16
6.33
6.50
6.66
6.81
6.96
7.09
7.23
7.35
7.46
7.57
7.67
7.77
7.85
7.93
8.00
8.06
8.12
8.16
8.20
8.23
8.25
8.26
8.26
8.25
8.24
8.21
8.18
8.13
8.08
8.01
7.94
7.86
7.76
7.66
7.54
7.42
7.28
7.14
6.98
6.81
6.63
6.44
6.24
5.66
7.08
9.24
9.81
0.64
1.16
1.63
2.07
2.49
2.90
3.28
3.66
4.02
4.37
4.71
5.04
5.36
5.66
5.97
6.26
6.54
6.81
7.08
7.33
7.58
7.82
8.05
8.27
8.48
8.69
8.88
9.07
9.24
9.41
9.57
9.71
9.85
9.98
10.10
10.20
10.30
10.39
10.46
10.53
10.58
10.63
10.66
10.68
10.69
10.68
10.67
10.64
10.60
10.55
10.48
10.40
10.31
10.20
10.08
9.95
9.81
9.64
9.47
9.28
9.08
8.86
8.62
8.37
8.11
212
224
236
250
265
280
300
315
335
355
375
400
450
6.35
7.02
7.69
8.47
9.28 10.09 11.16 11.94 12.98 14.00 15.00 16.22 18.58
7.95
8.81
9.67 10.64 11.67 12.69 14.01 14.98 16.24 17.47 18.66 20.10 22.79
10.42 11.56 12.67 13.93 15.24 16.49 18.08 19.20 20.62 21.93 23.13 24.46 26.56
0.70
1.28
1.80
2.30
2.77
3.22
3.66
4.08
4.48
4.88
5.26
5.63
6.00
6.35
6.69
7.02
7.34
7.65
7.95
8.24
8.52
8.80
9.06
9.31
9.55
9.78
10.00
10.22
10.42
10.60
10.78
10.95
11.11
11.25
11.38
11.50
11.61
11.71
11.79
11.87
11.92
11.97
12.00
12.02
12.03
12.02
12.00
11.96
11.91
11.84
11.76
11.66
11.55
11.42
11.28
11.12
10.94
10.75
10.54
10.31
0.76
1.39
1.97
2.52
3.04
3.54
4.03
4.49
4.95
5.39
5.81
6.23
6.63
7.02
7.40
7.77
8.13
8.48
8.81
9.14
9.45
9.76
10.05
10.33
10.60
10.86
11.10
11.34
11.56
11.77
11.97
12.15
12.32
12.48
12.62
12.75
12.87
12.97
13.06
13.14
13.20
13.24
13.27
13.28
13.28
13.26
13.23
13.17
13.10
13.02
12.91
12.79
12.65
12.49
12.32
12.12
11.91
11.67
11.42
11.15
0.83
1.51
2.15
2.75
3.32
3.87
4.40
4.91
5.41
5.89
6.36
6.82
7.26
7.69
8.11
8.52
8.91
9.29
9.67
10.02
10.37
10.70
11.02
11.33
11.63
11.91
12.18
12.43
12.67
12.90
13.11
13.31
13.49
13.66
13.82
13.95
14.07
14.18
14.27
14.34
14.40
14.43
14.45
14.45
14.44
14.40
14.35
14.27
14.18
14.07
13.94
13.78
13.61
13.41
13.19
0.90
1.65
2.35
3.00
3.63
4.24
4.82
5.39
5.94
6.47
6.99
7.50
7.99
8.47
8.93
9.38
9.81
10.24
10.64
11.04
11.42
11.79
12.14
12.47
12.80
13.10
13.40
13.67
13.93
14.18
14.41
14.62
14.81
14.99
15.14
15.28
15.41
15.51
15.59
15.65
15.70
15.72
15.72
15.71
15.67
15.60
15.52
15.41
15.28
15.13
0.98
1.80
2.56
3.28
3.97
4.64
5.28
5.90
6.51
7.09
7.67
8.22
8.76
9.28
9.79
10.29
10.76
11.23
11.67
12.11
12.52
12.92
13.30
13.67
14.02
14.35
14.66
14.96
15.24
15.50
15.73
15.95
16.15
16.33
16.49
16.63
16.74
16.83
16.90
16.95
16.97
16.97
16.95
16.90
16.83
16.73
16.60
16.45
16.26
16.06
1.06
1.95
2.77
3.55
4.31
5.03
5.73
6.41
7.07
7.71
8.33
8.94
9.52
10.09
10.65
11.18
11.70
12.20
12.69
13.15
13.60
14.03
14.44
14.83
15.21
15.56
15.89
16.20
16.49
16.76
17.00
17.23
17.42
17.60
17.75
17.88
17.98
18.06
18.10
18.13
18.12
18.09
18.03
17.94
17.82
1.16
2.14
3.05
3.92
4.75
5.55
6.33
7.08
7.81
8.52
9.21
9.88
10.53
11.16
11.77
12.36
12.93
13.48
14.01
14.52
15.01
15.47
15.91
16.34
16.73
17.11
17.46
17.78
18.08
18.35
18.60
18.81
19.00
19.17
19.30
19.40
19.47
19.51
19.52
19.50
19.44
19.35
19.23
19.07
18.87
1.24
2.28
3.26
4.19
5.08
5.94
6.77
7.58
8.36
9.12
9.86
10.58
11.27
11.94
12.60
13.23
13.83
14.42
14.98
15.52
16.03
16.52
16.98
17.42
17.83
18.22
18.58
18.91
19.20
19.47
19.71
19.92
20.10
20.24
20.35
20.43
20.47
20.47
20.44
20.37
1.34
2.48
3.54
4.55
5.52
6.45
7.36
8.24
9.09
9.92
10.72
11.50
12.25
12.98
13.68
14.36
15.01
15.64
16.24
16.81
17.36
17.87
18.36
18.82
19.24
19.64
20.00
20.33
20.62
20.88
21.10
21.28
21.43
21.54
21.61
21.64
21.62
21.57
21.47
21.32
1.44
2.67
3.81
4.91
5.95
6.97
7.94
8.89
9.81
10.70
11.57
12.41
13.21
14.00
14.75
15.47
16.17
16.83
17.47
18.07
18.64
19.18
19.68
20.15
20.58
20.98
21.33
21.65
21.93
22.16
22.36
22.51
22.61
22.67
22.69
22.65
22.57
22.44
22.25
22.02
1.54
2.86
4.09
5.26
6.39
7.47
8.52
9.54
10.53
11.48
12.41
13.30
14.16
15.00
15.80
16.56
17.30
18.00
18.66
19.29
19.88
20.43
20.94
21.42
21.85
22.23
22.58
22.87
23.13
23.33
23.48
23.59
23.64
23.64
23.58
1.67
3.09
4.43
5.70
6.92
8.10
9.24
10.34
11.41
12.44
13.44
14.40
15.33
16.22
17.07
17.89
18.67
19.40
20.10
20.75
21.36
21.92
22.43
22.90
23.32
23.69
24.00
24.26
24.46
24.61
24.70
24.72
24.69
24.59
24.42
1.92
3.56
5.10
6.57
7.98
9.34
10.66
11.92
13.14
14.32
15.46
16.55
17.59
18.58
19.53
20.42
21.27
22.05
22.79
23.46
24.07
24.62
25.11
25.53
25.88
26.17
26.37
26.51
26.56
26.54
26.43
26.24
25.96
VB
0.40
0.54
0.82
1.61
0.03
0.06
0.08
0.11
0.14
0.17
0.20
0.23
0.25
0.28
0.31
0.34
0.37
0.40
0.42
0.45
0.48
0.51
0.54
0.57
0.59
0.62
0.65
0.68
0.71
0.74
0.76
0.79
0.82
0.85
0.88
0.91
0.93
0.96
0.99
1.02
1.05
1.07
1.10
1.13
1.16
1.19
1.22
1.24
1.27
1.30
1.33
1.36
1.39
1.41
1.44
1.47
1.50
1.53
1.56
1.58
1.61
1.64
1.67
1.70
1.73
1.75
1.78
1.81
1.84
0.63
0.86
1.31
2.58
0.05
0.09
0.14
0.18
0.23
0.27
0.32
0.36
0.41
0.45
0.50
0.54
0.59
0.63
0.68
0.72
0.77
0.81
0.86
0.91
0.95
1.00
1.04
1.09
1.13
1.18
1.22
1.27
1.31
1.36
1.40
1.45
1.49
1.54
1.58
1.63
1.67
1.72
1.77
1.81
1.86
1.90
1.95
1.99
2.04
2.08
2.13
2.17
2.22
2.26
2.31
2.35
2.40
2.44
2.49
2.53
2.58
2.63
2.67
2.72
2.76
2.81
2.85
2.90
2.94
0.71
0.97
1.48
2.90
0.05
0.10
0.15
0.20
0.25
0.31
0.36
0.41
0.46
0.51
0.56
0.61
0.66
0.71
0.76
0.81
0.87
0.92
0.97
1.02
1.07
1.12
1.17
1.22
1.27
1.32
1.37
1.42
1.48
1.53
1.58
1.63
1.68
1.73
1.78
1.83
1.88
1.93
1.98
2.04
2.09
2.14
2.19
2.24
2.29
2.34
2.39
2.44
2.49
2.54
2.60
2.65
2.70
2.75
2.80
2.85
2.90
2.95
3.00
3.05
3.10
3.15
3.21
3.26
3.31
Pulleys
107
Power Ratings
optibelt VB section 20
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 52
nk
(min-1)
140
160
180
200
224
236
250
280
315
355
700
950
1450
2850
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
2.62
3.21
4.08
4.64
0.34
0.60
0.82
1.04
1.23
1.42
1.59
1.76
1.92
2.07
2.22
2.36
2.49
2.62
2.75
2.87
2.99
3.10
3.21
3.31
3.41
3.51
3.60
3.69
3.78
3.86
3.94
4.01
4.08
4.15
4.22
4.28
4.34
4.39
4.44
4.49
4.53
4.57
4.61
4.64
4.67
4.70
4.72
4.74
4.75
4.76
4.77
4.77
4.77
4.77
4.76
4.75
4.74
4.72
4.69
4.67
4.64
4.60
4.56
4.52
3.33
4.11
5.30
6.11
0.41
0.73
1.02
1.28
1.53
1.76
1.99
2.20
2.41
2.61
2.80
2.98
3.16
3.33
3.50
3.66
3.81
3.96
4.11
4.25
4.39
4.52
4.64
4.76
4.88
4.99
5.10
5.20
5.30
5.40
5.49
5.57
5.65
5.73
5.80
5.87
5.93
5.98
6.04
6.08
6.13
6.16
6.20
6.22
6.25
6.27
6.28
6.29
6.29
6.28
6.28
6.26
6.24
6.22
6.19
6.15
6.11
6.06
6.01
5.95
4.02
4.99
6.46
7.29
0.48
0.86
1.20
1.52
1.82
2.11
2.38
2.64
2.89
3.13
3.37
3.59
3.81
4.02
4.23
4.43
4.62
4.81
4.99
5.16
5.33
5.49
5.65
5.80
5.94
6.08
6.21
6.34
6.46
6.58
6.69
6.79
6.89
6.98
7.07
7.15
7.22
7.29
7.35
7.41
7.45
7.50
7.53
7.56
7.58
7.60
7.61
7.61
7.60
7.59
7.57
7.54
7.51
7.47
7.42
7.36
7.29
7.22
7.14
7.05
4.70
5.83
7.56
8.16
0.55
0.99
1.39
1.76
2.11
2.44
2.76
3.07
3.37
3.65
3.93
4.19
4.45
4.70
4.94
5.18
5.40
5.62
5.83
6.04
6.24
6.43
6.61
6.79
6.96
7.12
7.27
7.42
7.56
7.69
7.82
7.94
8.05
8.15
8.24
8.33
8.41
8.48
8.55
8.60
8.65
8.69
8.71
8.74
8.75
8.75
8.75
8.73
8.71
8.67
8.63
8.58
8.51
8.44
8.36
8.27
8.16
8.05
7.93
7.79
5.49
6.82
8.80
5.88
7.30
9.38
6.32
7.84
10.03
7.25
8.97
11.32
8.30
10.21
12.61
9.44
11.53
13.81
0.63
1.15
1.61
2.04
2.45
2.84
3.22
3.58
3.92
4.26
4.58
4.90
5.20
5.49
5.78
6.05
6.32
6.57
6.82
7.06
7.29
7.51
7.72
7.92
8.11
8.30
8.47
8.64
8.80
8.94
9.08
9.21
9.33
9.43
9.53
9.62
9.69
9.76
9.81
9.86
9.89
9.91
9.92
9.92
9.91
9.88
9.84
9.79
9.73
9.66
9.57
9.47
9.35
9.22
9.08
8.92
8.75
8.57
8.37
8.16
0.68
1.22
1.72
2.18
2.62
3.04
3.44
3.83
4.20
4.56
4.90
5.24
5.56
5.88
6.18
6.48
6.76
7.03
7.30
7.55
7.79
8.03
8.25
8.47
8.67
8.86
9.05
9.22
9.38
9.53
9.67
9.80
9.92
10.02
10.12
10.20
10.27
10.33
10.38
10.41
10.43
10.44
10.43
10.41
10.38
10.34
10.28
10.20
10.11
10.01
9.89
9.76
9.61
9.44
9.26
0.72
1.31
1.84
2.34
2.82
3.27
3.70
4.11
4.51
4.90
5.28
5.64
5.99
6.32
6.65
6.97
7.27
7.56
7.84
8.11
8.37
8.62
8.86
9.08
9.30
9.50
9.69
9.87
10.03
10.18
10.33
10.45
10.57
10.67
10.76
10.83
10.89
10.94
10.97
10.99
10.99
10.98
10.95
10.91
10.85
10.77
10.68
10.57
10.44
10.30
0.83
1.50
2.11
2.68
3.23
3.75
4.24
4.72
5.18
5.63
6.06
6.47
6.87
7.25
7.63
7.98
8.33
8.66
8.97
9.27
9.56
9.83
10.09
10.33
10.56
10.77
10.97
11.15
11.32
11.46
11.60
11.71
11.81
11.89
11.95
11.99
12.02
12.02
12.01
11.97
11.92
11.84
11.75
11.63
11.49
11.33
11.14
10.94
10.71
10.45
0.94
1.71
2.42
3.07
3.70
4.29
4.87
5.41
5.94
6.45
6.94
7.41
7.86
8.30
8.72
9.12
9.50
9.87
10.21
10.54
10.85
11.14
11.41
11.66
11.90
12.11
12.30
12.47
12.61
12.74
12.84
12.92
12.97
13.00
13.01
12.99
12.94
12.87
12.77
12.65
12.49
12.31
12.10
11.86
11.59
1.08
1.96
2.76
3.51
4.23
4.91
5.56
6.19
6.79
7.36
7.92
8.45
8.96
9.44
9.91
10.35
10.77
11.16
11.53
11.88
12.20
12.50
12.77
13.01
13.23
13.42
13.58
13.71
13.81
13.88
13.92
13.93
13.90
13.84
13.75
13.62
13.46
13.26
13.02
12.74
VB
0.18
0.24
0.37
0.73
0.01
0.03
0.04
0.05
0.06
0.08
0.09
0.10
0.12
0.13
0.14
0.15
0.17
0.18
0.19
0.21
0.22
0.23
0.24
0.26
0.27
0.28
0.29
0.31
0.32
0.33
0.35
0.36
0.37
0.38
0.40
0.41
0.42
0.44
0.45
0.46
0.47
0.49
0.50
0.51
0.53
0.54
0.55
0.56
0.58
0.59
0.60
0.62
0.63
0.64
0.65
0.67
0.68
0.69
0.71
0.72
0.73
0.74
0.76
0.77
0.29
0.39
0.59
1.17
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.21
0.23
0.25
0.27
0.29
0.31
0.33
0.35
0.37
0.39
0.41
0.43
0.45
0.47
0.49
0.51
0.53
0.55
0.57
0.59
0.62
0.64
0.66
0.68
0.70
0.72
0.74
0.76
0.78
0.80
0.82
0.84
0.86
0.88
0.90
0.92
0.94
0.96
0.98
1.01
1.03
1.05
1.07
1.09
1.11
1.13
1.15
1.17
1.19
1.21
1.23
108
Pulleys
0.32
0.44
0.67
1.31
0.02
0.05
0.07
0.09
0.12
0.14
0.16
0.18
0.21
0.23
0.25
0.28
0.30
0.32
0.35
0.37
0.39
0.42
0.44
0.46
0.48
0.51
0.53
0.55
0.58
0.60
0.62
0.65
0.67
0.69
0.71
0.74
0.76
0.78
0.81
0.83
0.85
0.88
0.90
0.92
0.95
0.97
0.99
1.01
1.04
1.06
1.08
1.11
1.13
1.15
1.18
1.20
1.22
1.25
1.27
1.29
1.31
1.34
1.36
1.38
Power Ratings
optibelt VB section 25
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 53
nk
(min-1)
224
236
250
280
315
355
400
450
500
560
700
950
1450
2850
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
5.68
6.86
8.15
6.47
7.86
9.43
7.38
9.00
10.88
9.28
11.38
13.78
11.45
14.03
16.81
13.84
16.90
19.77
16.43
19.91
22.40
19.16
22.94
21.74
25.63
24.62
28.37
0.71
1.26
1.76
2.22
2.65
3.06
3.44
3.81
4.16
4.49
4.81
5.12
5.41
5.68
5.95
6.20
6.43
6.65
6.86
7.06
7.24
7.40
7.55
7.69
7.81
7.92
8.02
8.09
8.15
8.20
8.23
8.24
8.24
8.22
8.18
8.12
8.04
7.95
7.84
7.70
7.55
7.38
7.19
6.97
6.74
6.48
6.21
5.91
5.58
5.24
0.78
1.40
1.96
2.48
2.97
3.43
3.88
4.30
4.70
5.09
5.45
5.81
6.15
6.47
6.78
7.07
7.35
7.61
7.86
8.09
8.30
8.50
8.69
8.85
9.00
9.14
9.25
9.35
9.43
9.50
9.54
9.57
9.57
9.56
9.52
9.47
9.39
9.29
9.17
9.03
8.87
8.68
8.47
8.23
7.97
7.69
7.38
7.04
6.68
6.29
0.87
1.56
2.20
2.79
3.34
3.87
4.38
4.86
5.33
5.77
6.20
6.61
7.00
7.38
7.73
8.08
8.40
8.71
9.00
9.27
9.52
9.76
9.98
10.18
10.36
10.52
10.66
10.78
10.88
10.96
11.01
11.05
11.06
11.04
11.01
10.95
10.87
10.76
10.62
10.46
10.27
10.06
9.82
9.55
9.25
8.92
8.56
8.17
7.75
7.30
1.05
1.91
2.69
3.43
4.13
4.80
5.44
6.06
6.65
7.22
7.77
8.29
8.80
9.28
9.75
10.19
10.61
11.00
11.38
11.73
12.06
12.36
12.64
12.90
13.13
13.33
13.51
13.66
13.78
13.87
13.93
13.97
13.97
13.94
13.88
13.79
13.66
13.50
13.30
13.07
12.80
12.49
12.15
11.76
11.34
1.26
2.31
3.27
4.18
5.04
5.87
6.67
7.43
8.17
8.88
9.56
10.22
10.85
11.45
12.02
12.57
13.09
13.57
14.03
14.46
14.86
15.22
15.56
15.86
16.12
16.35
16.54
16.69
16.81
16.89
16.92
16.92
16.87
16.78
16.64
16.46
16.23
15.95
15.63
15.25
1.50
2.76
3.92
5.02
6.07
7.08
8.05
8.98
9.87
10.74
11.56
12.36
13.12
13.84
14.53
15.18
15.79
16.37
16.90
17.40
17.85
18.26
18.62
18.93
19.20
19.42
19.59
19.71
19.77
19.78
19.73
19.63
19.46
19.24
18.95
1.76
3.26
4.64
5.96
7.21
8.41
9.57
10.68
11.75
12.77
13.75
14.69
15.58
16.43
17.22
17.97
18.67
19.31
19.91
20.44
20.92
21.33
21.69
21.98
22.20
22.36
22.45
22.46
22.40
22.26
2.06
3.81
5.44
6.98
8.46
9.87
11.23
12.53
13.78
14.97
16.11
17.18
18.20
19.16
20.05
20.88
21.64
22.33
22.94
23.48
23.93
24.31
24.60
24.80
24.90
24.92
24.83
24.65
24.36
23.96
2.35
4.35
6.22
7.99
9.69
11.30
12.86
14.34
15.75
17.10
18.37
19.57
20.70
21.74
22.70
23.57
24.35
25.04
25.63
26.12
26.50
26.77
26.92
26.96
26.87
2.69
5.00
7.15
9.19
11.14
12.99
14.76
16.45
18.05
19.56
20.97
22.29
23.51
24.62
25.61
26.49
27.25
27.88
28.37
28.72
28.93
28.99
28.88
28.62
28.18
VB
0.61
0.82
1.26
2.47
0.04
0.09
0.13
0.17
0.22
0.26
0.30
0.35
0.39
0.43
0.48
0.52
0.56
0.61
0.65
0.69
0.74
0.78
0.82
0.87
0.91
0.95
1.00
1.04
1.08
1.13
1.17
1.21
1.26
1.30
1.34
1.39
1.43
1.47
1.52
1.56
1.60
1.65
1.69
1.73
1.78
1.82
1.86
1.91
1.95
1.99
2.04
2.08
2.12
2.17
0.97
1.32
2.01
3.95
0.07
0.14
0.21
0.28
0.35
0.42
0.49
0.55
0.62
0.69
0.76
0.83
0.90
0.97
1.04
1.11
1.18
1.25
1.32
1.39
1.46
1.53
1.60
1.66
1.73
1.80
1.87
1.94
2.01
2.08
2.15
2.22
2.29
2.36
2.43
2.50
2.57
2.64
2.70
2.77
2.84
2.91
2.98
3.05
3.12
3.19
3.26
3.33
3.40
3.47
1.09
1.48
2.26
4.44
0.08
0.16
0.23
0.31
0.39
0.47
0.55
0.62
0.70
0.78
0.86
0.94
1.01
1.09
1.17
1.25
1.33
1.40
1.48
1.56
1.64
1.72
1.79
1.87
1.95
2.03
2.10
2.18
2.26
2.34
2.42
2.49
2.57
2.65
2.73
2.81
2.88
2.96
3.04
3.12
3.20
3.27
3.35
3.43
3.51
3.59
3.66
3.74
3.82
3.90
Pulleys
109
Power Ratings
optibelt VB section D/32
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 54
nk
(min-1)
315
355
375
400
425
450
500
560
630
670
710
750
800
900
700
950
1450
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
920
940
960
980
1000
1020
1040
1060
1080
1100
1120
1140
1160
1180
1200
1220
1240
1260
1280
1300
1320
1340
1360
1380
1400
15.30
18.50
21.43
0.80
1.46
2.08
2.66
3.22
3.76
4.28
4.79
5.29
5.77
6.24
6.70
7.16
7.60
8.04
8.47
8.89
9.30
9.71
10.11
10.50
10.88
11.26
11.63
12.00
12.36
12.71
13.06
13.40
13.73
14.06
14.38
14.69
15.00
15.30
15.59
15.88
16.16
16.44
16.71
16.97
17.22
17.47
17.71
17.95
18.18
18.40
18.61
18.82
19.02
19.21
19.39
19.57
19.74
19.90
20.06
20.20
20.34
20.47
20.60
20.71
20.82
20.92
21.01
21.09
21.16
21.23
21.29
21.34
21.37
19.17
23.20
26.56
0.96
1.77
2.53
3.25
3.94
4.61
5.26
5.89
6.51
7.11
7.71
8.29
8.86
9.42
9.97
10.51
11.04
11.56
12.07
12.58
13.08
13.56
14.04
14.52
14.98
15.44
15.88
16.32
16.75
17.18
17.59
18.00
18.40
18.79
19.17
19.54
19.90
20.26
20.61
20.95
21.28
21.60
21.91
22.21
22.51
22.79
23.07
23.33
23.59
23.83
24.07
24.30
24.51
24.72
24.92
25.10
25.28
25.44
25.59
25.74
25.87
25.99
26.10
26.20
26.28
26.36
26.42
26.47
26.51
26.54
21.05
25.45
28.81
1.04
1.93
2.75
3.54
4.29
5.03
5.74
6.43
7.11
7.78
8.43
9.07
9.70
10.31
10.92
11.51
12.10
12.68
13.24
13.80
14.35
14.89
15.41
15.93
16.45
16.95
17.44
17.92
18.40
18.86
19.32
19.77
20.20
20.63
21.05
21.46
21.86
22.25
22.63
23.00
23.36
23.71
24.05
24.38
24.70
25.00
25.30
25.59
25.86
26.13
26.38
26.62
26.85
27.07
27.27
27.47
27.65
27.82
27.98
28.12
28.25
28.37
28.48
28.57
28.65
28.72
28.77
28.81
28.83
28.84
23.36
28.15
31.31
1.14
2.12
3.03
3.90
4.74
5.55
6.34
7.11
7.87
8.61
9.33
10.04
10.74
11.43
12.10
12.77
13.42
14.06
14.69
15.31
15.92
16.52
17.11
17.69
18.25
18.81
19.36
19.90
20.42
20.94
21.45
21.94
22.43
22.90
23.36
23.81
24.25
24.68
25.10
25.50
25.90
26.28
26.65
27.00
27.35
27.68
28.00
28.31
28.60
28.88
29.15
29.40
29.64
29.87
30.08
30.28
30.46
30.63
30.78
30.92
31.04
31.15
31.24
31.32
31.38
31.43
31.45
31.47
31.46
31.44
25.62
30.75
33.45
1.24
2.31
3.31
4.26
5.18
6.07
6.94
7.78
8.61
9.43
10.22
11.01
11.78
12.53
13.27
14.00
14.72
15.43
16.12
16.80
17.47
18.13
18.78
19.42
20.04
20.65
21.25
21.84
22.42
22.98
23.53
24.07
24.60
25.11
25.62
26.11
26.58
27.04
27.49
27.93
28.35
28.76
29.16
29.54
29.90
30.25
30.59
30.91
31.21
31.50
31.78
32.04
32.28
32.50
32.71
32.91
33.08
33.24
33.38
33.50
33.61
33.69
33.76
33.81
33.84
33.86
33.85
33.82
33.78
33.71
27.82
33.23
35.22
1.34
2.50
3.58
4.61
5.61
6.58
7.53
8.45
9.36
10.24
11.11
11.97
12.80
13.63
14.44
15.23
16.01
16.78
17.54
18.28
19.01
19.73
20.43
21.12
21.80
22.46
23.11
23.75
24.37
24.98
25.58
26.16
26.73
27.28
27.82
28.34
28.85
29.34
29.82
30.28
30.73
31.16
31.57
31.97
32.35
32.71
33.06
33.39
33.70
33.99
34.26
34.52
34.76
34.97
35.17
35.35
35.51
35.65
35.77
35.86
35.94
35.99
36.03
36.04
36.03
36.00
35.94
35.86
35.76
35.64
32.05
37.80
36.82
42.59
41.91
47.12
44.59
47.08
49.38
51.98
56.17
1.54
2.87
4.13
5.32
6.48
7.61
8.71
9.78
10.83
11.86
12.87
13.86
14.84
15.79
16.73
17.66
18.56
19.46
20.33
21.19
22.03
22.86
23.67
24.46
25.24
26.00
26.74
27.47
28.18
28.87
29.54
30.20
30.83
31.45
32.05
32.63
33.19
33.73
34.25
34.75
35.23
35.68
36.12
36.53
36.92
37.29
37.64
37.96
38.26
38.53
38.78
39.01
39.21
39.38
39.53
39.66
39.75
39.82
39.86
39.87
39.86
39.82
39.74
39.64
39.51
1.78
3.32
4.77
6.17
7.51
8.82
10.10
11.35
12.57
13.77
14.95
16.10
17.24
18.35
19.44
20.51
21.56
22.59
23.60
24.59
25.56
26.51
27.44
28.34
29.23
30.09
30.93
31.75
32.55
33.32
34.07
34.79
35.49
36.17
36.82
37.44
38.04
38.61
39.15
39.66
40.15
40.61
41.04
41.44
41.81
42.14
42.45
42.72
42.97
43.18
43.35
43.49
43.60
43.67
43.71
43.71
43.67
43.60
43.49
43.34
2.05
3.84
5.52
7.14
8.70
10.23
11.71
13.16
14.58
15.97
17.34
18.68
19.99
21.27
22.53
23.77
24.97
26.16
27.31
28.44
29.55
30.62
31.67
32.69
33.69
34.65
35.58
36.49
37.36
38.20
39.01
39.79
40.53
41.24
41.91
42.55
43.16
43.72
44.25
44.74
45.19
45.60
45.97
46.30
46.59
46.84
47.04
47.19
47.31
47.37
47.39
47.36
47.29
47.16
46.99
2.21
4.13
5.95
7.69
9.38
11.02
12.62
14.19
15.72
17.22
18.69
20.12
21.53
22.91
24.27
25.59
26.88
28.15
29.38
30.59
31.76
32.90
34.01
35.09
36.13
37.14
38.12
39.06
39.96
40.83
41.66
42.45
43.20
43.92
44.59
45.22
45.80
46.35
46.84
47.30
47.70
48.06
48.38
48.64
48.85
49.01
49.12
49.18
49.18
49.13
2.36
4.42
6.37
8.24
10.05
11.81
13.52
15.20
16.84
18.45
20.02
21.56
23.06
24.54
25.98
27.39
28.76
30.10
31.41
32.68
33.92
35.12
36.29
37.41
38.50
39.55
40.56
41.53
42.46
43.34
44.18
44.98
45.72
46.43
47.08
47.68
48.24
48.74
49.19
49.59
49.94
50.22
50.46
50.63
50.74
2.51
4.71
6.79
8.78
10.71
12.59
14.42
16.21
17.96
19.67
21.34
22.98
24.58
26.14
27.67
29.16
30.61
32.02
33.40
34.74
36.03
37.29
38.50
39.67
40.80
41.88
42.91
43.90
44.84
45.73
46.56
47.35
48.08
48.76
49.38
49.95
50.45
50.90
51.29
51.61
51.87
52.07
52.20
52.26
52.25
2.71
5.07
7.31
9.46
11.54
13.56
15.53
17.46
19.34
21.18
22.97
24.73
26.44
28.11
29.74
31.33
32.87
34.37
35.83
37.24
38.60
39.91
41.18
42.39
43.55
44.66
45.71
46.71
47.64
48.52
49.34
50.10
50.79
51.42
51.98
52.47
52.89
53.24
53.52
53.73
3.08
5.79
8.34
10.80
13.18
15.49
17.73
19.93
22.06
24.15
26.18
28.16
30.09
31.96
33.78
35.55
37.26
38.90
40.49
42.02
43.48
44.88
46.21
47.47
48.66
49.78
50.82
51.78
52.67
53.47
54.19
54.82
55.36
55.81
56.17
56.44
56.61
56.67
56.64
56.50
VB
1.14
1.54
2.36
0.03
0.06
0.10
0.13
0.16
0.19
0.23
0.26
0.29
0.32
0.36
0.39
0.42
0.45
0.49
0.52
0.55
0.58
0.62
0.65
0.68
0.71
0.75
0.78
0.81
0.84
0.88
0.91
0.94
0.97
1.01
1.04
1.07
1.10
1.14
1.17
1.20
1.23
1.27
1.30
1.33
1.36
1.40
1.43
1.46
1.49
1.53
1.56
1.59
1.62
1.66
1.69
1.72
1.75
1.79
1.82
1.85
1.88
1.92
1.95
1.98
2.01
2.05
2.08
2.11
2.14
2.18
2.21
2.24
2.27
1.82
2.47
3.77
0.05
0.10
0.16
0.21
0.26
0.31
0.36
0.42
0.47
0.52
0.57
0.62
0.68
0.73
0.78
0.83
0.88
0.94
0.99
1.04
1.09
1.14
1.20
1.25
1.30
1.35
1.40
1.46
1.51
1.56
1.61
1.66
1.72
1.77
1.82
1.87
1.92
1.98
2.03
2.08
2.13
2.18
2.24
2.29
2.34
2.39
2.44
2.50
2.55
2.60
2.65
2.70
2.76
2.81
2.86
2.91
2.96
3.02
3.07
3.12
3.17
3.22
3.28
3.33
3.38
3.43
3.48
3.53
3.59
3.64
v (m/s)
Dynamically balanced (for details see DIN 2211)
110
Pulleys
2.05
2.78
4.24
0.06
0.12
0.18
0.23
0.29
0.35
0.41
0.47
0.53
0.58
0.64
0.70
0.76
0.82
0.88
0.94
0.99
1.05
1.11
1.17
1.23
1.29
1.34
1.40
1.46
1.52
1.58
1.64
1.69
1.75
1.81
1.87
1.93
1.99
2.05
2.10
2.16
2.22
2.28
2.34
2.40
2.45
2.51
2.57
2.63
2.69
2.75
2.81
2.86
2.92
2.98
3.04
3.10
3.16
3.21
3.27
3.33
3.39
3.45
3.51
3.56
3.62
3.68
3.74
3.80
3.86
3.92
3.97
4.03
4.09
Power Ratings
optibelt VB section E/40
Nominal Power Rating PN (kW) for
Statically balanced
v (m/s)
Pulleys
Table 55
nk
(min-1)
450
500
560
630
670
710
750
800
850
900
950
1000
700
950
1450
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
920
940
960
980
1000
1020
1040
1060
1080
1100
1120
1140
1160
1180
1200
1220
1240
1260
1280
1300
26.44
29.78
31.70
35.30
37.57
40.95
43.78
46.07
47.00
49.97
52.68
55.67
58.21
60.27
61.83
62.87
1.47
2.70
3.83
4.90
5.92
6.91
7.87
8.80
9.70
10.58
11.43
12.27
13.08
13.88
14.66
15.42
16.16
16.88
17.59
18.28
18.95
19.60
20.24
20.86
21.46
22.04
22.61
23.15
23.68
24.19
24.68
25.15
25.60
26.03
26.44
26.84
27.21
27.56
27.89
28.19
28.48
28.74
28.98
29.20
29.39
29.57
29.71
29.84
29.93
30.01
30.06
30.08
30.07
30.04
29.99
29.90
29.79
29.65
29.48
29.29
29.06
28.80
28.52
28.20
27.86
1.72
3.17
4.52
5.80
7.03
8.21
9.36
10.48
11.57
12.63
13.66
14.67
15.66
16.62
17.56
18.48
19.38
20.26
21.11
21.94
22.76
23.54
24.31
25.06
25.78
26.48
27.16
27.81
28.44
29.04
29.63
30.18
30.71
31.22
31.70
32.15
32.57
32.97
33.34
33.68
34.00
34.28
34.54
34.76
34.95
35.11
35.24
35.34
35.41
35.44
35.44
35.40
35.33
35.22
35.08
34.90
34.68
34.43
34.14
33.81
33.44
33.03
32.58
32.09
31.55
2.02
3.74
5.34
6.87
8.34
9.76
11.13
12.47
13.78
15.05
16.29
17.51
18.69
19.85
20.98
22.09
23.16
24.21
25.23
26.23
27.19
28.13
29.04
29.92
30.78
31.60
32.39
33.15
33.88
34.58
35.24
35.88
36.47
37.04
37.57
38.06
38.52
38.94
39.32
39.66
39.97
40.23
40.46
40.64
40.78
40.88
40.94
40.95
40.91
40.83
40.71
40.53
40.31
40.04
39.72
39.35
38.93
38.46
37.93
37.36
2.37
4.40
6.29
8.10
9.85
11.53
13.17
14.77
16.32
17.84
19.32
20.76
22.17
23.54
24.88
26.19
27.46
28.70
29.90
31.06
32.19
33.29
34.34
35.36
36.33
37.27
38.17
39.03
39.84
40.61
41.34
42.02
42.65
43.24
43.78
44.27
44.71
45.10
45.44
45.73
45.96
46.13
46.25
46.32
46.32
46.27
46.15
45.98
45.74
45.43
45.07
44.63
44.13
43.56
42.93
2.57
4.77
6.83
8.80
10.70
12.54
14.33
16.06
17.76
19.41
21.02
22.59
24.12
25.62
27.07
28.49
29.86
31.20
32.49
33.75
34.96
36.13
37.26
38.34
39.37
40.36
41.31
42.20
43.04
43.84
44.58
45.27
45.90
46.48
47.00
47.47
47.87
48.22
48.50
48.72
48.87
48.96
48.99
48.94
48.83
2.76
5.14
7.37
9.50
11.55
13.54
15.47
17.35
19.18
20.97
22.71
24.40
26.05
27.66
29.23
30.75
32.22
33.65
35.04
36.37
37.66
38.90
40.09
41.23
42.31
43.34
44.32
45.24
46.10
46.90
47.64
48.32
48.94
49.49
49.97
50.39
50.73
51.01
51.21
51.34
51.40
51.38
51.27
51.09
50.83
2.96
5.51
7.90
10.19
12.40
14.53
16.61
18.63
20.59
22.51
24.37
26.19
27.96
29.68
31.35
32.97
34.54
36.06
37.52
38.93
40.29
41.59
42.83
44.02
45.14
46.20
47.20
48.13
48.99
49.79
50.51
51.17
51.75
52.25
52.68
53.02
53.29
53.47
53.57
53.59
3.20
5.97
8.57
11.05
13.44
15.77
18.02
20.21
22.34
24.42
26.44
28.40
30.31
32.16
33.96
35.70
37.38
39.00
40.55
42.05
43.48
44.84
46.14
47.37
48.52
49.60
50.60
51.53
52.38
53.14
53.83
54.42
54.93
55.34
55.67
55.90
56.03
56.06
55.99
55.82
3.44
6.42
9.22
11.90
14.49
16.99
19.42
21.78
24.07
26.30
28.47
30.58
32.62
34.60
36.52
38.37
40.15
41.86
43.50
45.06
46.55
47.97
49.30
50.55
51.72
52.80
53.79
54.69
55.50
56.21
56.81
57.32
57.72
58.02
58.21
3.68
6.88
9.88
12.75
15.52
18.20
20.80
23.33
25.79
28.17
30.48
32.73
34.90
37.00
39.02
40.97
42.85
44.64
46.35
47.97
49.51
50.96
52.31
53.57
54.73
55.79
56.75
57.60
58.33
58.96
59.46
59.85
60.12
60.26
60.27
3.92
7.33
10.53
13.60
16.55
19.41
22.18
24.87
27.48
30.01
32.47
34.84
37.14
39.35
41.48
43.52
45.48
47.34
49.10
50.77
52.34
53.81
55.17
56.42
57.55
58.57
59.46
60.23
60.87
61.39
61.76
62.00
62.09
62.04
61.83
4.16
7.78
11.18
14.43
17.57
20.60
23.54
26.39
29.16
31.83
34.42
36.93
39.34
41.66
43.88
46.01
48.03
49.95
51.76
53.47
55.05
56.52
57.86
59.08
60.16
61.11
61.92
62.59
63.11
63.48
VB
1.92
2.60
3.97
0.05
0.11
0.16
0.22
0.27
0.33
0.38
0.44
0.49
0.55
0.60
0.66
0.71
0.77
0.82
0.88
0.93
0.99
1.04
1.09
1.15
1.20
1.26
1.31
1.37
1.42
1.48
1.53
1.59
1.64
1.70
1.75
1.81
1.86
1.92
1.97
2.03
2.08
2.14
2.19
2.24
2.30
2.35
2.41
2.46
2.52
2.57
2.63
2.68
2.74
2.79
2.85
2.90
2.96
3.01
3.07
3.12
3.18
3.23
3.28
3.34
3.39
3.45
3.50
3.56
3.07
4.16
6.35
0.09
0.18
0.26
0.35
0.44
0.53
0.61
0.70
0.79
0.88
0.96
1.05
1.14
1.23
1.31
1.40
1.49
1.58
1.66
1.75
1.84
1.93
2.02
2.10
2.19
2.28
2.37
2.45
2.54
2.63
2.72
2.80
2.89
2.98
3.07
3.15
3.24
3.33
3.42
3.50
3.59
3.68
3.77
3.86
3.94
4.03
4.12
4.21
4.29
4.38
4.47
4.56
4.64
4.73
4.82
4.91
4.99
5.08
5.17
5.26
5.34
5.43
5.52
5.61
5.70
3.45
4.68
7.14
0.10
0.20
0.30
0.39
0.49
0.59
0.69
0.79
0.89
0.98
1.08
1.18
1.28
1.38
1.48
1.58
1.67
1.77
1.87
1.97
2.07
2.17
2.27
2.36
2.46
2.56
2.66
2.76
2.86
2.95
3.05
3.15
3.25
3.35
3.45
3.55
3.64
3.74
3.84
3.94
4.04
4.14
4.24
4.33
4.43
4.53
4.63
4.73
4.83
4.92
5.02
5.12
5.22
5.32
5.42
5.52
5.61
5.71
5.81
5.91
6.01
6.11
6.21
6.30
6.40
Pulleys
111
Special Drives
V-Flat Drives
The V-at drive comprises one grooved pulley and one at pulley.
This type of power transmission can, under certain conditions, be
used for drives with intermittent loading or with a large moment of
inertia. As ywheels or at pulleys are often already present, the
=
=
=
=
=
=
da
dd
Fl
f
=
=
=
=
h
i
Lath
Ldth
pf
P
Sn
=
=
=
=
=
=
=
=
kf
dd
Da
a
112
pitch length Lw
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(cm2)
(mm)
(mm)
(mm)
(mm)
(N/cm2)
(kW)
(N)
()
Special Drives
V-Flat Drives
Table 56: Arc of contact factor c1 (for V-at belt drives only)
The calculation of a V-at drive uses the same method as the one
set out on pages 79 to 81. In order to ensure reliability and efciency, the V-at belt drive must full the following requirements:
kf =
Da dd
a
Classiscal
V-belt
Ratio
Drive
centre
distance
kf-factor
i=
Da + DZ
3
dd
azul Da
Kraftbands
i=
Da + DZ
3
da
azul Da
a=
Da dd
0.85
a=
Da da
0.85
kf =
Da dd
a
kf =
Da da
a
0
0.07
0.15
0.22
0.29
0.35
0.40
0.45
0.50
0.57
0.64
0.70
0.75
0.80
0.85
0.92
1.00
1.07
1.15
1.21
1.30
1.36
1.45
kf =
Da dd
a
c1
180
176
170
167
163
163
156
153
150
146
143
140
137
134
130
125
120
115
110
106
100
96
90
0.75
0.76
0.77
0.79
0.79
0.79
0.81
0.81
0.82
0.83
0.84
0.85
0.85
0.86
0.86
0.84
0.82
0.80
0.78
0.77
0.73
0.72
0.70
Z/10
A/13
B/17
C/22
D/32
E/40
DZ
mm
10
13
18
23
25
Kraftbands
Section 3V/ 5V/ 8V/ SPZ SPA SPB SPC A/ B/ C/ D/
9J 15J 25J
HA HB HC HD
DZ
mm
13
23
41 12
15
19
26
12
20 24
35
(Da + DZ dd)2
4a
(Da + DZ da)2
4a
113
Special Drives
V-Flat Drives
Da da
2
(h < hmax)
Solution:
b = b2 + f
b = 120 + 35 = 155 mm
da
Da
Given/calculated:
V-grooved pulley
Section
Drive centre distance a
SPB 5V/15J
C/22/HC, SPC
D/32/HD, 8V/25J
E/40
< 500
20
< 750
25
< 1000
30
< 1250
40
< 1750
45
500-750
25
750-1000
35
1000-1250
40
1250-1750
50
1750-2250
60
> 750
30
> 1000
40
> 1250
50
> 1750
65
> 2250
75
P 1000
v
Da bu z
36 000
Sn
Fl
Formula:
Calculating the static belt tension for
V-at belt drives T (N)
T=
114
Special Drives
Tension/Guide Idlers
Idler Conguration
Unless design requirements call for an outside idler, the inside idler
is usually more advantageous. Its diameter can be kept smaller than
that of the outside idler.
Depending upon the type of belt, inside idlers can either take
the form of a grooved or at pulley.
Table 58: Section dimensions
Belt type
Grooved
pulley
Flat
pulley
Kraftbands with
high-performance wedge belts
3V/9J; 5V/15J; 8V/25J; SPA; SPZ; SPB; SPC
idler conguration,
Kraftbands with
classical V-belts
A/HA; B/HB; C/HC; D/HD
115
Special Drives
Tension/Guide Idlers
Fig. 3
at pulley
ck
sla
e
sid
Fig. 1
slack side
as far as possible
On drives with long belt spans grooved pulleys are the preferred
choice for inside idlers because with at pulleys transverse vibrations and belt turnover can occur.
Minimum Diameter for Inside Idlers
Inside idler smallest loaded pulley in the drive system or
smallest permissible pulley diameter for the
section used.
tight side
Fig. 2
Exceptions:
Section
Minimum diameter
of the outside idler
(mm)
Z/10
56-63
90
A/13
71-90
125
SPZ, 3V/9N
63-90
125
90-112
150
SPA
Diameter of the
smallest loaded
pulley in the drive
(mm)
sid
ck
sla
tight side
116
The belt service life is signicantly reduced if the minimum recommended idler diameter is less than the size recommended. The
use of an Optibelt special construction can signicantly improve
service life.
Idler Design
Grooved pulleys which are used as idlers can normally have standard groove dimensions. On drives subject to severe vibration and
with long drive centre distances, it is recommended that deep
grooved pulleys be employed.
Flat pulleys should, where possible, be cylindrical and not crowned. Flanged pulleys are recommended as belt guides. The corners
formed by the contact surface and pulley ange should be sharp.
Round edges encourage the belt to run up on the anges causing
turn over.
Special Drives
Tension/Guide Idlers
The face width or the contact surface between the two anges is
calculated as follows:
b = b2 + m
b = face width / contact surface
b2 = face width of the grooved pulley
m = additional value
Section
(mm)
(mm)
(mm)
15
20
25
30
35
40
45
c4
0
1
2
3
1.00
0.91
0.86
0.81
The nominal power rating PN per belt is, as before, based on the
smallest loaded pulley.
Calculation of the arc of contact correction factor c1 must be based
on the smallest contact angle of the loaded pulley which occurs
when the belt is stretched to its maximum limit.
Table 60: Arc of contact correction factor c1
=
c1
75
80
85
90
95
0.82
0.84
0.86
0.88
0.90
175
180
185
190
195
1.00
1.00
1.00
1.00
1.01
100
105
110
115
120
0.91
0.92
0.93
0.94
0.95
200
205
210
215
220
1.01
1.01
1.01
1.01
1.01
125
130
135
140
145
0.96
0.96
0.97
0.97
0.98
225
230
240
250
1.01
1.01
1.02
1.02
150
155
160
165
170
0.98
0.99
0.99
0.99
1.00
(ddg ddk)2
4a
Number of Belts
c1
with standard
belt length
The following formula for determining the number of belts is obtained using the idler correction factor c4
xed drive
centre distance
z=
P c2
PN c1 c3 c4
117
Special Drives
Twist Drives
Drives in which the belt run is transposed are often simply termed
twist drives. These can be drives where the shafts are not parallel, whose pulleys and idlers are not all arranged on one plane, or
drives with two parallel but counter rotating shafts. Because of the
twisting of the belt, this type of drive requires a certain degree of
lateral bending exibility. The cross section of the V-belt is better
suited for this purpose than the at belt. In most applications twist
drives use only single V-belts, but drives using belt sets are possible.
The crossing of the belt spans and the non-aligned entry of the belt
into the pulley leads to a reduction of the belt service life.
The entry and exit angle between the belt and the pulley plane
should not be more than 5. The required inclination of the shafts
and the pulleys relative to each other and the belt entry and exit
angles should be conrmed by practical tests. In addition, certain
critical drives may have a considerably improved safety factor if
Optibelt special constructions are used.
The most important types of twist drives and the associated design
guidelines are illustrated in the following text.
118
Special Drives
Twist Drives
Plan view
Horizontal shaft
Vertical shaft
Elevation
Tight side
Horizontal shaft
1.
Table 61
Drive centre
distance a
(mm)
y1 (mm)
Classical
V-belts
y1 (mm)
Wedge
belts
>
>
>
>
1200
1500
2000
2500
3000
1500
2000
2500
3000
3500
5
8
12
17
25
5
8
10
15
>
>
>
>
>
3500
4000
4500
5000
5500
4000
4500
5000
5500
6000
35
45
55
65
80
25
30
40
45
55
100
65
> 6000
Vertical shaft
9. The drive centre distance must be adjustable so that the belt can
be tted without force, the necessary tension applied, and the
belt stretch and wear taken up during its service life.
119
Special Drives
Twist Drives
Design Guidelines
Eighth twist drives are seldom required. The shafts in this drive
system are at an angle of 45 relative to each other.
1.
L in
length m
m span
u
im
in
M
Design Guidelines
Table 62
Section
SPZ, 3V/9N
SPA
SPB, 5V/15N
SPC
8V/25N
A/13
B/17
C/22
D/32
E/40
120
2. As far as possible, the crossover point of the belt should be arranged in the centre of the belt spans. The rubbing of the belt
spans against each other is at a minimum at this point. In order
to avoid contact completely, it is recommended that a guide
pulley be placed in the slack side S2 near the crossover point.
3. Length calculation
(dg + dk)2
4a
Special Drives
Drive Belts with Aramid Tension Cord
cN = centiNewton
Polyester
Aramid
Applications
Tensile
strength
(cN/tex)
Total
extension at
fracture (%)
Tension
2%
(cN/tex)
81
190
14
4
15
73
Belt surface
Aramid tension cord
Bedding compound
Bedding compound
Base compound
Moulded cog
Fabric cover
The high grade, specially processed Aramid tension cord is embedded in a rubber compound. It is effectively supported by a ller
and base of polychloroprene and natural rubber compounds containing transversely arranged bres. The fabric cover is treated on
both sides with a rubber compound and completely envelops the
V-belt.
121
Special Drives
Drive Belts with Aramid Tension Cord
Diagram 6
Diagram 7
60
50
40
30
20
10
0
0
10 11 12
n
tio
uc
tr
co
ns
co
rd
80
id
70
100
80
120
60
ra
90
Running (minutes)
100
110
RED POWER II
120
130
40
l
Po
20
ye
r
te
co
rd
co
ns
tru
ct
io
13 14
25
50
75
0
10
50 500
1
12
5
17
00
20
Speed n (rpm)
Test arrangement
This diagram shows, in a direct comparison, the signicantly higher power rating
of the Optibelt V-belt with the Aramid cord construction.
Sections / Lengths
X
1600 N
Because of Aramids special properties, belts for multigrooved drives must be ordered in sets as the set tolerance is
matched to the Aramid tension cord.
d1/d2 = 180 mm
n1 = 1750 min-1
Brake load P
= 15 kW
In this graph, the belt extension under load (drive centre distance increase) is
plotted against time, for both materials. After only one hour, the increase with
polyester is already several times that of Aramid.
Section
Lengths
Range
V-Belts
SPZ
1000 Lw
3550 Lw
SPA
1000 Lw
4500 Lw
SPB
1250 Lw
8000 Lw
SPC
2000 Lw
12500 Lw
3V/ 9N
3V 400 / 9N 1016 La
3V 1400 / 9N
5V/15N
8V/25N
As per the
3556 La
Kraftbands
3V/ 9J
3V 500 / 9J 1270 La
3V 1400 / 9J
5V/15J
3556 La
8V/25J
Datum length Ld
122
Optibelt standard
range
Design Hints
Belt Tension for optibelt V-Belts
The correct level of belt tension has a direct and crucial bearing
on the trouble free transmission of power and the achievement of
acceptable belt service life. Belt tension which is either too high or
too low often results in premature failure. Belts which are over
tensioned sometimes cause damage to the bearings on the driver
or driven units.
Experience has shown that the more common tensioning methods,
e.g. the thumb pressure method do not ensure tension settings
that would enable drives to be operated at optimum efciency. It
is therefore recommended that the required static belt tension T
be calculated for each drive using the Optibelt formulae. This tension is the lowest possible required by a drive to transmit the
highest power level from the drive, taking account of the normal
amount of slip.
Once the belt has been tted and the initial tension applied, it
should be checked using an Optibelt tension gauge. The belt should
be monitored regularly during the rst few hours of operation.
Experience has shown that the rst retensioning should be undertaken after approximately 30 minutes to four hours running under
full load. This takes up the initial belt stretch and bedding in to
the pulley grooves.
Span
Ea
(mm)
(mm)
(N)
EL
100
L = anom sin
= slip
(%)
(rpm)
(rpm)
(rpm)
(rpm)
(mm)
(N)
(N)
Formula for calculating the slip:
S = (1
n1L/n2L
n1B/n2B
) 100
+ k v2
At the rated loading, the slip should not exceed 1 %. The belt
service life is considerably shortened due to excessive ank
wear and over heating when tension is too low and slip ensues
under load.
123
Design Hints
Belt Tension for optibelt V-Belts and Kraftbands
Diagram 8: Belt tension graphs for Optibelt SK wedge belts to BS 3790 and DIN 7753 Part 1
4.8
4.6
4.4
Belt deection per 100 mm span length E (mm)
4.2
4.0
3.8
Section
SPZ, 3V/9N
SPA
SPB, 5V/15N
SPC
k
0.07
0.12
0.19
0.37
f (N)
25
50
75
125
Section
Z/10
A/13
B/17
20
C/22
25
D/32
k
0.06
0.11
0.20
0.27
0.33
0.42
0.67
f (N)
15
25
50
75
100
125
150
3.6
3.4
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
Minimum static belt tension T (N)
Diagram 9: Belt tension graphs for Optibelt VB classical V-belts to BS 3790 and DIN 2215
4.8
4.6
4.4
4.2
4.0
3.8
3.6
3.4
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
124
Design Hints
Belt Tension for optibelt V-Belts and Kraftbands
Diagram 10: Belt tension graphs for Optibelt Super X-POWER M=S wedge belts raw edge, moulded cogged
4.8
4.6
4.4
Belt deection per 100 mm span length E (mm)
4.2
4.0
3.8
Section
XPZ, 3VX
XPA
XPB. 5VX
XPC
k
0.06
0.11
0.18
0.34
f (N)
25
50
75
125
Section
ZX/X10
AX/X13
BX/X17
CX/X22
k
0.06
0.10
0.17
0.28
f (N)
15
25
50
100
3.6
3.4
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
Minimum static belt tension T (N)
Diagram 11: Belt tension graphs for Optibelt SUPER TX M=S V-belts raw edge, moulded cogged
4.8
4.6
4.4
4.2
4.0
3.8
3.6
3.4
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
Minimum static belt tension T (N)
125
Design Hints
Belt Tension for optibelt V-Belts
and optibelt KB Kraftbands
+ k v2
Example:
PB = 1136 kW
c1 = 0.97
v = 25.91 m/s
Drive arrangement with one set comprising:
2 Optibelt KB Kraftbands 4-8V 3750/25J 9525 La
2 Optibelt KB Kraftbands 5-8V 3750/25J 9525 La
T
MR
1000
Where M is 4000 mm
A =
4000 5.4
1000
= 21.6 mm
Tighten the kraftband until the lines marked on the top surface are
M plus the length additional value apart. This will set the correct
tension.
Note: The tension set will be more accurate if the drive is rotated
2 or 3 times to settle the belts into the pulley grooves before
nally accepting the value M + A.
126
Design Hints
Belt Tension for optibelt V-Belts
and optibelt KB Kraftbands
3V/9J
5V/15J
8V/25J
SPZ
SPA
SPB
SPC
A/HA
B/HB
C/HC
Single belt
3V/9N
5V/15N 8V/25N
SPZ
SPA
SPB
SPC
A/13
B/17
C/22
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
50
75
100
125
150
0.8
1.2
1.6
2.1
2.6
0.8
1.2
1.6
2.1
2.6
0.8
1.0
1.3
1.6
1.9
0.8
1.0
1.3
1.6
1.9
0.8
175
200
225
250
275
3.0
3.5
4.0
4.5
4.9
3.0
3.5
4.0
4.5
4.9
2.2
2.5
2.8
3.0
3.3
2.2
2.5
2.8
3.0
3.3
0.9
1.1
1.2
1.4
1.5
300
350
400
450
500
5.3
6.4
7.6
8.7
10.0
5.3
6.4
7.6
8.7
10.0
3.6
4.2
4.7
5.3
5.8
3.6
4.2
4.7
5.3
5.8
1.6
1.8
2.0
2.2
2.5
1.6
1.8
2.1
2.3
2.5
2.7
3.0
3.2
3.5
4.2
2.7
2.9
3.1
3.4
3.8
4.8
5.3
4.2
4.7
5.1
5.5
1.3
1.7
2.0
2.4
2.7
1.3
1.7
2.0
2.4
2.7
550
600
650
700
800
3.1
3.4
3.8
4.1
4.8
3.1
3.4
3.8
4.1
4.8
2.0
2.2
2.4
2.8
900
1000
1100
1200
1300
5.5
6.2
6.9
7.6
8.3
2.9
3.3
5.5
6.2
6.9
7.6
8.3
3.3
3.7
4.1
4.5
5.0
1400
1500
1600
1700
1800
9.0
9.7
10.4
11.1
11.8
3.7
4.1
4.6
5.0
5.5
9.0
9.7
10.4
11.1
11.8
5.4
5.8
6.3
6.8
7.3
1900
2000
2100
2200
2300
6.0
6.5
7.0
7.5
8.0
2400
2500
2600
2700
2800
8.6
9.6
10.6
11.7
12.8
2900
3000
3100
3200
3300
13.5
14.2
14.9
15.6
16.3
7.8
8.3
8.8
9.3
9.8
k for kraftbands
0.12
0.25
0.69
0.12
0.16
0.25
0.55
0.16
0.27
0.45
0.07
0.19
0.57
0.07
0.12
0.19
0.37
0.11
0.20
0.33
127
Design Hints
Calculating the Axial Force/Shaft Loading under Dynamic Conditions
With drives having electric motors as the prime movers, care should
be taken to ensure that the dynamic loading can be safely accommodated by the motor shafts and bearings to which it is applied.
Experience has shown that drives on
electric motors,
internal combustion engines,
turbines,
and very heavy-duty drives such as stone crushers, calenders,
and heavily loaded mills,
In the case of two pulley drives, the driver and driven shafts and
the bearings are subjected to the same dynamic axial force, but in
opposite directions. When idlers are employed, the magnitude and
the direction of the axial force are almost always different on each
pulley. If the magnitude and direction of the dynamic axial force is
to be determined, a graphical solution, using a vector diagram for
the dynamic forces in the tight side S1 and the slack side S2, is
always recommended.
If only the magnitude of the dynamic axial force is to be determined,
this can be achieved using the formula for Sa dyn.
call for the dynamic bearing load to be determined, that is the shaft
and bearing loads on both the driver and the driven shafts.
PB = 171.6 kW
c1 = 1.00
v = 21.76 m/s
= 170
1020 PB
c1 v
S1
1020 171.6
1.0 21.76
8044 N
S2
158 N
A) Graphical solution
Sa dyn
Design Hints
Belt Tensioning for optibelt V-Belts
optibelt TT mini
Tension Tester
The optibelt TT mini
is used for tension checking of
drive belts by means of frequency measurement in Hertz (Hz).
Advantages of the optibelt
TT mini:
Readings in Hertz [Hz]
Wide measurement spectrum
from 10-600 Hz
Non-contact repeatable measurement
Very compact and
easy to handle
Automatic shut down
Works calibrated and CE approved
T = 4 k L2 f2
T
k
L
f
pressure surface
pocket clip
belt
pressure spring
Design Hints
Belt Tensioning for optibelt V-Belts
Section
Diameter of
small pulley
RED POWER II
Initial tting
Re-tting
new V-belts
existing V-belts
(mm)
Standard
(wrapped)
Initial
tting
Retension
Initial
tting
Retension
SPZ; 3V/9N;
XPZ; 3VX/9NX
71
> 71 90
> 90 125
> 125 *
250
300
400
200
250
300
200
250
350
150
200
250
250
300
400
200
250
300
SPA;
XPA
100
> 100 140
> 140 200
> 200 *
400
500
600
300
400
450
350
400
500
250
300
400
400
500
600
300
400
450
SPB; 5V/15N;
XPB; 5VX/15NX
160
> 160 224
> 224 355
> 355 *
700
850
1000
550
650
800
650
700
900
500
550
700
700
850
1000
550
650
800
SPC;
XPC
250
> 250 355
> 355 560
> 560 *
1400
1600
1900
1100
1200
1500
1000
1400
1800
800
1100
1400
1400
1600
1900
1100
1200
1500
Z/10;
ZX/X10
50
> 50 71
> 71 100
> 100 *
A/13;
AX/X13
80
> 80 100
> 100 132
> 132 *
B/17;
BX/X17
125
> 125 160
> 160 200
> 200 *
C/22;
CX/X22
200
> 200 250
> 250 355
> 355 *
130
range:
range:
range:
range:
70 150
150 600
500 1400
1300 3100
N
N
N
N
90
120
140
70
90
110
120
140
160
90
110
130
150
200
300
110
150
250
200
250
400
150
200
300
300
400
500
250
300
400
450
500
600
350
400
450
700
800
900
500
600
700
800
900
1000
600
700
800
speed v = 5 to 42 m/s
speed v = 5 to 30 m/s
Design Hints
Installation and Maintenance Aids
131
Design Hints
Installation and Maintenance Aids
Safety: Before starting any maintenance work, it is extremely important that any machine components
are in a safe position which cannot be changed during maintenance work. In addition, safety
recommendations of the manufacturer are to be strictly observed.
optibelt KS V-Grooved Pulley with Taper Bush
The V-grooved pulleys are to be checked
for damage and correct dimensions before installation.
Installation (see pictures on page 134)
1. All shiny surfaces like bore and tapered surface of
the taper bush as well as the tapered bore of the
pulley have to be cleaned and degreased. Insert
taper bush and hub and align all connecting bores.
Half tapped holes have to face half plain bores.
2. Stud screws (TB 1008-3030) and/or cap head
screws (TB 3525-5050) should be slightly greased
and screwed in. Do not yet tighten the screws.
3. Clean and degrease the shaft. Push pulley with
1008,
1210,
2012
2517
3020,
3525,
4040
4545
5050
Wrench
size
No. of
screws
3
5
6
6
8
10
12
14
14
2
2
2
2
2
3
3
3
3
1108
1215, 1310, 1610, 1615
3030
3535
Tightening
moment
(Nm)
5.7
20.0
31.0
49.0
92.0
115.0
172.0
195.0
275.0
132
Design Hints
Installation and Maintenance Aids
Initial Installation
Always install the V-belts without using force. Installations using screw drivers, crowbars
etc. cause internal and external damage to the belt. V-belts installed under force might
only run for several days. A proper installation of the belt saves you time and money.
Where there is insufcient adjustment for easy belt tting the belts should be tted to
the pulleys before the pulleys are tted to the shafts.
Belt Tensioning
Use belt tensioning values according to Optibelts recommendations. Set the belt tension with the motor and machine shafts parallel. Operate the belt for some revolutions
and check the belt tension again. By experience, belt tension should be checked again
after an operation time of about 0.5 to 4 hours and corrected, if necessary.
* For further hints on belt tensioning see page 129.
* Optikrik
Pulley
diameter
dd1, dd2
112
224
450
630
900
1100
1400
1600
mm
mm
mm
mm
mm
mm
mm
mm
Max. permissible
deviation
X1, X2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
mm
mm
mm
mm
mm
mm
mm
mm
Drive Checking
We recommend checking the drive regularly, e.g. after each 3 to 6 months. V-grooved
pulleys are to be checked for wear and consistency. Use the Optibelt section and
pulley groove templates as aids.
When changing V-grooved pulleys with taper bushes (see gures on page 132) the
following procedures should be observed.
1. Loosen all screws. Screw out one or two screws depending on the bush size, grease them and screw them
into the extraction bores.
2. Tighten the screw or screws equally until the bush releases from the hub and the pulley can be moved freely on the shaft.
3. Take off the pulley with the bush from the shaft.
Design Hints
Installation and Maintenance Aids
V-Grooved Pulleys with Taper Bushes
Assembly
Bush
TB 1008-3030
Bush
TB 3525-5050
Disassembly
Bush
TB 1008-3030
134
Bush
TB 3525-5050
Design Hints
Storage
Storage Area
The storage area should be dry and dust free.
V-belts must not be stored close to chemicals, solvents, fuels,
lubricants and acids etc.
Temperature
V-belts should be stored at temperatures between + 15 C and
+ 25 C. Lower temperatures usually have no detrimental effect
on the V-belts. Since, however, belts become very stiff at low
temperatures, they should be warmed to approximately + 20 C
before tting to avoid fracture and cracking.
Radiators and supply pipes should be screened. V-belts should
be stored at least 1 m away from heat sources.
Proper Storage
Because stress can promote both permanent deformation and
cracking, care must be taken to ensure that V-belts are stored
without stress i.e. without tension, compression or any other form
of pressure.
If V-belts have to be stored horizontally and stacked upon each
other, it is recommended that the stack height does not exceed
300 mm in order to avoid permanent deformation. If, in order
to save space, V-belts are hung, the diameter of the cylinder on
which the belts rest should be at least ten times the height of the
belt section.
optibelt S=C plus, optibelt Super X-POWER
M=S and optibelt SUPER TX M=S belts do not
need to be stored in sets as they can be formed into
sets without having to be measured.
Cleaning
Dirty V-belts can be cleaned using a 1:10 mixture of glycerine
and methylated spirits. Petrol, benzole, turpentine and the like
should not be used.
In addition, sharp objects, wire brushes, emery paper etc. must,
under all circumstances, be avoided as these can cause damage to the belt.
Light
V-belts should be protected against light, especially direct sunlight and strong articial light with a high ultra-violet content
(ozone formation) such as naked uorescent tubes. Illumination
using conventional light bulbs is advisable.
Ozone
In order to counteract the harmful effects of ozone, warehouses
should not contain any appliances that generate ozone, for
example uorescent lights, mercury vapour lamps or high voltage
electrical equipment. Combustion gases and vapours which
could lead to the formation of ozone by photo-chemical processes must be avoided or eliminated.
Moisture
Damp storage areas are unsuitable. Care must be taken to
ensure that condensation does not develop. The most favourable relative air humidity is below 65 %.
135
Design Hints
Physical Properties
yes
yes
30
+ 100
good
yes
30
+ 90
good
MARATHON 1,
MARATHON 2 M=S
automotive belts
30
+ 90
VB
classical V-belts
40
+ 70
KB
kraftbands
40
+ 70
DK
double section V-belts
Special
construction
yes
Standard
construction
limited
SK
high performance
wedge belts
40
+ 70
RED POWER II
high-performancewedge belts
Stretch
Smooth running
30
+ 90
Standard
construction
Anti-static properties
(after testing)
Oil
resistance
Standard
construction
Ambient temperature
maximum/minimum
(C)
Special
construction
XHR
medium/
good
low
very
low
yes
good
very
low
yes
yes
good
very
low
good
yes
M2
yes
good
very
low
30
+ 90
limited
yes
yes
medium/
good
low
very
low
35
+ 90
limited
yes
good
low
very
low
35
+ 85
good
yes
medium
low
SUPER VX
variable speed belts
30
+ 90
good
yes
very
good
very
low
RB
ribbed belts
30
+ 90
PJ
PK, PL
special
construction
very
good
low
136
30
+ 120
good
yes
Design Hints
Physical Properties
Special
construction
Maintenance
low
possible
no
up to limited good
1 : 10
low
55*
up to
97 %
good
low
possible
no
up to good
1 : 10
Standard
construction
Synchronous
good
Recommended
max. speed ratio
Use on variable
speed pulleys
up to
97 %
Efciency
42
Recommended
max. belt speed
m/s
Vibration tendency
Recommended applications
Behaviour under
shock loading
Use with
outside
idlers
maintenance
free
Super
X-POWER:
low
maintenance
depends
on section up to
55* 97 %
good
low
possible
no
up to
good
1 : 12 limited
42
up to
97 %
good
low
possible
no
up to
good maintenance
1 : 12 limited
free
30
up to
97 %
good
low
possible
no
up to
1 : 12 limited good
low
depends
up to
on section
97 %
42
very
good
very
low
not
possible
no
up to
limited very
1 : 15
good
low
up to
95 %
good
low
not
possible
no
up to very
1 : 5 good good
low
depends
up to
on section
95 %
42
good
low
good
no
limited
low
good
very
low
not
possible
no
up to good
1 : 35
low
30
depends up to
on section 96 %
60
up to
1 : 12
for 2
variable
speed
pulleys
137
Design Hints
Physical Properties
30
+ 100
30
+ 140
limited
yes
ZR
timing belts
30
+ 100
30
+ 140
limited
yes
very
good
none
ALPHA
timing belts made
from polyurethane
30
+ 80
good
no
good
none
RR
plastic round section
belting
10
+ 80
good
no
medium
high
KK
plastic V-belting
10
+ 80
good
no
medium
high
Optimat OE
open-ended
V-belting, punched
DIN 2216
20
+ 70
limited
no
medium
high
PKR
V-belts with patterned top surface
30
+ 70
limited
yes
medium
low
Optimax HF
high performance
at belts
20
+ 110
limited
no
very
good
low
138
very
good
gut
Stretch
Anti-static properties
(after testing)
OMEGA, OMEGA HP
+ OMEGA HL
timing belts
Smooth running
Standard
construction
Oil
resistance
Special
construction
XHR
Ambient temperature
maximum/minimum
(C)
Standard
construction
none
Design Hints
Recommended applications
Maintenance
Special
construction
Standard
construction
Recommended
max. speed ratio
Synchronous
Use with
outside
idlers
Use on variable
speed pulleys
Vibration tendency
Behaviour under
shock loading
Efciency
Recommended
max. belt speed
m/s
Physical Properties
depends up to
depends
not
on section 98 % sensitive
on
possible
speed
80
yes
depends
depends
not
on
on section up to sensitive
98 %
speed possible
80
yes
maintenance
up to
free
1 : 10 good good
depends
depends
not
on
on section up to sensitive
98 %
speed possible
80
yes
maintenance
up to
free
1 : 10 good good
20
up to
95 %
good
low
not
possible
no
frequent
up to good good
retensioning
1 : 10
Special machinery
20
up to
95 %
good
low
not
possible
no
frequent
up to
1 : 10 good good retensioning
20
up to
90 %
good
medium
limited
possible
no
up to limit1 : 10 ed
depends
on section up to
95 %
20
good
low
limited
possible
no
up to limit1 : 10 ed
up to
95 %
good
very
low
not
possible
no
up to very
1 : 12 good
70
frequent
retensioning
good
low
low
139
Design Hints
Problems Causes Remedies
Problems
Belt failure shortly after tting
(belt snaps)
Causes
Remedies
Drive jammed
Remove cause
Excessive heat
Excessive cold
Contamination by chemicals
Drive undersized
Correct tension
Unbalanced V-pulleys
Balance pulleys
Should other problems occur, please contact our engineers from the Applications Engineering Department. They will require comprehensive technical details in order to
provide you with concrete solutions.
140
Design Hints
Problems Causes Remedies
Problems
Belts turn over in pulley grooves
Causes
Poor drive alignment
Incorrect belt/pulley groove section
Excessive wear in pulley grooves
Excessive vibration
Belt tension too low
Foreign matter in the pulley grooves
Remedies
Realign pulleys
Match belt and pulley groove section
Renew pulleys
Use an inside idler on drive slack side;
use Optibelt KB Kraftbands
Re-tension drive
Remove foreign matter and install drive
guard
Replace pulleys
Realign pulleys
Realign pulleys
Drive overloaded
Replace pulleys
Should other problems occur, please contact our engineers from the Applications Engineering Department. They will require comprehensive technical details in order to
provide you with concrete solutions.
141
Design Hints
Length Measurement Conversion and Conditions Factors
Force Q (N)
142
Design Hints
Length Measurement Conversion and Conditions Factors
Datum
diameter
Outside
diameter
Datum
width
Groove
angle
Groove
depth
Force
Outside length
Inside length
dd
0.05
da
0.05
bd
10
tmin
Q (N)
La (mm)
Li (mm)
SPZ; XPZ
300
95.49
100
8.50
36
11
360
La Ld + 13
La Li + 51
Li Ld 38
Li La 51
SPA; XPA
450
143.24
149
11.00
36
14
560
La Ld + 18
La Li + 63
Li Ld 45
Li La 63
SPB; XPB
600
190.99
198
14.00
36
18
900
La Ld + 22
La Li + 82
Li Ld 60
Li La 82
SPC; XPC
1000
318.31
328
19.00
36
24
1500
La Ld + 30
La Li + 113
Li Ld 83
Li La 113
Section
Outside
diameter
3V/9N; 3VX/9NX
5V/15N; 5VX/15NX
Section
8V/25N
Groove
angle
Groove
depth
Force
Inside length
da
0.13
Upper
groove
width
b1
0.13
15
tmin
Q (N)
Li (mm)
300
95.50
8.90
38
9.00
445
Li La 42
600
191.00
15.24
38
15.00
1000
Li La 71
1000
318.30
25.40
38
25.50
2225
Li La 120
Section
Datum
circumference
Ud
= dd
Datum
diameter
Outside
diameter
Datum
width
Groove
angle
Groove
depth
Force
Outside length
Inside length
dd
0,05
da
0,05
bd
10
tmin
Q (N)
La (mm)
Ld (mm)
70
22.28
24.88
4.20
32
30
La Li + 19
La L d + 8
Ld Li + 11
Ld L a 8
Y/6
90
28.65
31.85
5.30
32
40
La Li + 25
La Ld + 10
Ld Li + 15
Ld La 10
140
44.56
48.56
6.70
32
80
La Li + 31
La Ld + 12
Ld Li + 19
Ld La 12
Z/10; ZX/X10
180
57.30
62.30
8.50
34
10
110
La Li + 38
La Ld + 16
Ld Li + 22
Ld La 16
A/13; AX/X13
300
95.50
102.10
11.00
34
12
200
La Li + 50
La Ld + 20
Ld Li + 30
Ld La 20
B/17; BX/X17
400
127.32
135.72
14.00
34
15
300
La Li + 69
La Ld + 29
Ld Li + 40
Ld La 29
20
520
165.52
175.12
17.00
34
18
750
La Li + 79
La Ld + 31
Ld Li + 48
Ld La 31
C/22; CX/X22
700
222.82
234.22
19.00
34
20
750
La Li + 88
La Ld + 30
Ld Li + 58
Ld La 30
25
800
254.65
267.25
21.00
34
22
750
La Li + 100
La Ld + 39
Ld Li + 61
Ld La 39
D/32
1000
318.31
334.52
27.00
36
28
1400
La Li + 126
La Ld + 51
Ld Li + 75
Ld La 51
E/40
1800
572.96
596.96
32.00
36
36
1800
La Li + 157
La Ld + 77
Ld Li + 80
Ld La 77
143
Design Hints
Length Measurement Conversion and Conditions Factors
Groove
depth
Mean
distance
Tolerance
Tol.
Force
per rib
Inside length
da
0.13
Upper
groove
width
b1
0.13
15
tmin
e1)
e2)
Q (N)
Li (mm)
300
95.50
8.90
38
9.00
10.30
0.25
0.5
445
Li La 42
5V/15J
600
191.00
15.20
38
15.00
17.50
0.25
0.5
1000
Li La 71
8V/25J
1000
318.30
25.40
38
25.50
28.60
0.40
0.8
2225
Li La 120
Outside
circumference
Ua
= da
Outside
diameter
3V/9J
Section
Datum
circumference
Ud
= dd
Datum
Outside
diameter diameter
Datum
width
Groove
angle
Groove
depth
Mean
Tolerance
distance
Tol.
Force
per rib
Datum length
dd
0.13
da
0.13
bd
15
tmin
e1)
e2)
Q (N)
Ld (mm)
SPZ
300
95.49
100.00
8.50
36
11.00
12.00
0.30
0.5
360
Ld La 13
SPA
450
143.24
149.00
11.00
36
14.00
15.00
0.30
0.5
560
Ld La 18
SPB
600
190.99
198.00
14.00
36
18.00
19.00
0.40
0.8
900
Ld La 22
SPC
1000
318.31
328.00
19.00
36
24.00
25.50
0.40
0.8
1500
Ld La 30
Groove
depth
Mean
distance
Tolerance
Tol.
Force
per rib
Inside length
da
0.13
Upper
groove
width
b1
0.13
15
tmin
e1)
e2)
Q (N)
Li (mm)
254
80.85
12.45
32
12.50
15.88
0.38
0.8
300
Li La 36
B/HB
381
121.28
16.00
32
14.50
19.05
0.38
0.8
450
Li La 62
C/HC
635
202.13
22.33
34
20.00
25.40
0.38
0.8
850
Li La 75
D/HD
889
282.96
31.98
34
28.00
36.53
0.38
0.8
1000
Li La 111
Outside
circumference
Ua
= da
Outside
diameter
A/HA
Section
Outside
diameter
da
Upper groove
width
b1
Groove
angle
20
Groove
depth
tmin
Q (N)
AA/HAA
300
95.49
12.60
34
300
BB/HBB
400
127.32
16.20
34
10
450
CC/HCC
600
190.99
22.30
34
14
850
DD/HDD
900
286.48
32.00
34
20
1400
22 x 22
600
190.99
22.30
34
14
750
25 x 22
942
300.00
25.00
34
22
1200
Section
144
Force
Design Hints
Length Tolerances
SPZ/XPZ
SPA/XPA
SPB/XPB
SPC/XPC
>
630
>
900
> 1 250
> 2 000
> 3 150
> 5 000
> 8 000
> 10 000
900
1 250
2 000
3 150
5 000*
8 000
10 000
12 500
DIN
DIN
2
2
2
4
6
8
DIN 7753
6
9
12
20
32
50
80
100
to
to
to
to
to
to
to
to
9
12
20
32
50
80
100
125
wrapped
raw edge
wrapped
raw edge
2
2
2
2
2
4
6
8
2
4
6
6
10*
2
2
2
4
6
10
16
2
4
6
6
10*
5
Y/6
8
Z/10; ZX/X10
A/13; AX/X13
B/17; BX/X17
20
C/22; CX/X22
25
D/32
E/40
250
> 250
315
> 315
400
> 400
500
> 500
630
> 630
800
> 800
900
> 900 1 250
> 1 250 1 600
> 1 600 2 000
> 2 000 2 500
> 2 500 3 150
> 3 150 4 000*
> 4 000 5 000
> 5 000 6 300
> 6 300 8 000
> 8 000 10 000
>10 000 12 500
>12 500 15 000
>15 000 20 000
wrapped
DIN 2215
wrapped
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
2
2
2
2
2
2
4
4
6
8
DIN
DIN
+
8/ 4
+
9/ 4
+ 10/ 5
+ 11/ 6
+ 13/ 6
+ 15/ 7
+ 17/ 8
+ 19/ 10
+ 23/ 11
+ 27/ 13
+ 31/ 16
+ 37/ 18
+ 44/ 22
+ 52/ 26
+ 63/ 32
+ 77/ 38
+ 93/ 46
+ 112/ 56
+ 140/ 70
+ 170/ 85
2
2
2
2
2
2
2
4
2
2
2
2
2
2
4
4
6
8
DIN
DIN
raw edge
2
2
2
4
4
4
6
8
8*
wrapped
raw edge
2
2
2
2
2
2
2
4
4
4
8
8
12
12
20
20
32
32
48
48
2
2
2
2
2
2
2
4
4
4
8
8
12*
Design Hints
Length Tolerances
Section
Length
designation
Outside length
(mm)
Optibelt
wrapped
3V/9N
3VX/9NX
5V/15N
5VX/15NX
8V/25N
265
530
560
600
800
1 000
1 120
1 500
2 000
2 500
3 150
4 000
4 250
4 750
500
800
1 000
1 060
1 400
1 900
2 360
3 000
3 750
4 500
5 000
673 1 270
1 346
1 422
1 524 2 032
2 032 2 540
2 540 2 692
2 845 3 556
3 810 4 826
5 080 5 994
6 350 7 620
8 001 9 525
10 160
10 795 11 430
12 065 12 700
RMA/MPTA
8
10
10
10
13
15
15
20
20
20
25
25
30
30
acc. RMA/MPTA
2
2
2
2
2
2
2
4
4
6
8
8
12
Optibelt
wrapped
raw edge
4
2
2
2
2
2
2
2
4
4
6
8
8
12
RMA/MPTA
4
4
6
6
6
6
10*
4
4
6
6
6
6
10
10
10
16
16
16
16
24
Section
AA/HAA
BB/HBB
CC/HCC
DD/HDD
22 x 22
25 x 22
+ 8/ 16
+ 9/ 18
+ 11/ 22
+ 13/ 26
+ 15/ 30
+ 18/ 36
+ 22/ 44
+ 26/ 52
+ 32/ 64
+ 39/ 78
4
4
5
6.3
8
10
12.5
16
20
25
Table 75: Kraftbands with high performance wedge belts and classical V-belts
Section
3V/9J; 3VX/9JX
5V/15J; 5VX/15JX
8V/25J
SPZ; SPA; SPB; SPC
A/HA
B/HB
C/HC
D/HD
146
Design Hints
Conversion Factors
Cross-section
bxh
Section
base
width
bu
Datum
width
bd
SPZ
9.7 x 8
4.2
8.5
SPA
12.7 x 10
5.8
11.0
SPB
16.3 x 13
7.3
14.0
SPC
22.0 x 18
9.6
19.0
Belt length
Nominal Outside length Datum length
length
Ld
La
Datum
length
Ld
La L d
La L i
La L d
La L i
La L d
La L i
La L d
La L i
+ 13
+ 51
+ 18
+ 63
+ 22
+ 82
+ 30
+ 113
Inside length
Li
Li Ld
Li La
Li L d
Li La
Li Ld
Li La
Li L d
Li La
38
51
45
63
60
82
83
113
Recommended
minimum pulley
diameter
(mm)
Datum
diameter
dd
Belt
weight
( kg/m)
63
0.074
90
0.123
140
0.195
224
0.377
63
0.074
140
0.195
335
0.575
9.0 x 8
4.2
5V/15N
15.0 x 13
7.3
8V/25N
25.0 x 23
9.6
Outside
length
La
Ld La
Li La 42
Ld La 11
Li La 71
Li La 120
Outside
diameter
da
The conversion factors Ld to La is used when a section according to DIN 7753 Part 1 is to be replaced by the corresponding section according to RMA/MPTA.
Optibelt Super X-POWER M=S wedge belts raw edge, moulded cogged BS 3790/DIN 7753 Part 1
XPZ
9.7 x 8
4.2
8.5
XPA
12.7 x 10
5.8
11.0
XPB
16.3 x 13
7.3
14.0
XPC
22.0 x 18
9.6
19.0
Datum
length
Ld
La Ld
La L i
La L d
La L i
La L d
La L i
La L d
La L i
+ 13
+ 51
+ 18
+ 63
+ 22
+ 82
+ 30
+ 113
Li Ld
Li La
Li L d
Li La
Li Ld
Li La
Li L d
L i La
38
51
45
63
60
82
83
113
Datum
diameter
dd
56
0.065
71
0.111
112
0.183
180
0.340
Optibelt Super X-POWER M=S wedge belts raw edge, moulded cogged USA Standard RMA/MTPA
3VX/9NX
9.0 x 8
4.2
Outside
length
La
Ld La
Li La 42
Outside
diameter
da
56
0.065
112
0.183
40
0.062
63
0.099
90
0.165
140
0.276
20
0.018
28
0.026
40
0.042
50
0.064
71
0.109
112
0.196
160
0.266
180
0.324
250
0.420
355
0.668
500
0.958
Ld La 11
Li La 71
5VX/15NX
15.0 x 13
7.3
The conversion factors Ld to La is used when a section to BS 3790 or DIN 7753 Part 1 is to be replaced by the corresponding section to RMA/MPTA.
10.0 x 6
5.9
8.5
AX/X13
13.0 x 8
7.5
11.0
BX/X17
17.0 x 11
9.4
14.0
CX/X22
22.0 x 14
12.3
19.0
Datum
length
Ld
La L i
La L d
La L i
La L d
La L i
La L d
La L i
La L d
+
+
+
+
+
+
+
+
38
16
50
20
69
29
88
30
La L i
La Ld
La L i
La Ld
La L i
La Ld
La L i
La Ld
La L i
La Ld
La L i
La Ld
La L i
La Ld
La L i
La Ld
La L i
La Ld
La L i
La Ld
La L i
La Ld
+ 19
+ 8
+ 25
+ 10
+ 31
+ 12
+ 38
+ 16
+ 50
+ 20
+ 69
+ 29
+ 79
+ 31
+ 88
+ 30
+ 100
+ 39
+ 126
+ 51
+ 157
+ 77
Li L d
Li La
Li L d
Li La
Li L d
Li La
Li L d
Li La
22
38
30
50
40
69
58
88
Datum
diameter
dd
5.0 x 3
2.8
4.2
Y/6
6.0 x 4
3.3
5.3
8.0 x 5
4.5
6.7
Z/10
10.0 x 6
5.9
8.5
A/13
13.0 x 8
7.5
11.0
B/17
17.0 x 11
9.4
14.0
20
20.0 x 12.5
11.4
17.0
C/22
22.0 x 14
12.3
19.0
25
25.0 x 16
14.0
21.0
D/32
32.0 x 20
18.2
27.0
E/40
40.0 x 25
22.8
32.0
Datum
length
Ld
Ld Li
Ld L a
Ld Li
Ld La
Ld Li
Ld La
Ld Li
Ld La
Ld Li
Ld La
Ld Li
Ld La
Ld Li
Ld La
Ld Li
Ld La
L d Li
Ld La
L d Li
Ld La
L d Li
Ld La
11
8
15
10
19
12
22
16
30
20
40
29
48
31
58
30
61
39
75
51
80
77
Datum
diameter
dd
147
Design Hints
Conversion Factors
Optibelt KB Kraftbands with high performance wedge belts to ISO 5290/USA Standard RMA/MTPA
Section
Height
h
Bottom
width
bu
of the
single belts
3V/9J
9.9
4.2
5V/15J
15.1
7.3
8V/25J
25.5
9.6
Belt length
Nominal
length
Outside length
La
Outside
length
La
Datum length
Ld
Inside length
Li
Li La 42
Li La 71
Li La 120
Recommended
minimum pulley
diameter
(mm)
Outside
diameter
da
Rib weight
( kg/m)
67
0.122
180
0.252
315
0.693
80
0.120
10.5
5.4
SPA
12.5
7.0
SPB
15.6
8.8
SPC
22.6
9.3
La Ld + 13
Datum
length
Ld
La Ld + 18
La Ld + 22
La Ld + 24
Datum
diameter
dd
112
0.166
160
0.261
250
0.555
9.9
7.5
13.0
9.4
16.2
12.3
22.4
18.2
Datum
length
Ld
La Li + 36
Ld Li + 30
La Li + 62
Ld Li + 40
80
0.163
125
La Li + 75
Ld Li + 58
0.266
200
0.447
La Li + 111
Ld Li + 75
355
0.798
80
0.163
125
0.266
200
0.447
355
0.798
Datum
diameter
dd
9.9
7.5
HB
13.0
9.4
HC
16.2
12.3
HD
22.4
18.2
Outside
length
La
Li La 36
Li La 62
Li La 75
Li La 111
Outside
diameter
da
AA/HAA
Cross-section
bxh
Section
bottom
width
bu
13 x 10
Datum
length
BB/HBB
17 x 13
CC/HCC
22 x 17
DD/HDD
32 x 25
Recommended
minimum pulley
diameter
(mm)
Belt length
Outside
diameter
da
Belt
weight
( kg/m)
80
0.150
125
0.250
224
0.440
355
0.935
280
0.511
280
0.625
22 x 22
25 x 22
25 x 22
Reference
length
Outside
diameter
da
Cross-section
bxh
Section
bottom
width
bu
9.5
10 x 8
4.9
8.5
12.5
13 x 10
5.8
11.0
Datum
width
bd
Belt length
Nominal Outside length Datum length
Ld
length
La
Outside
length
La
Inside length
Li
Ld La 13
Li La 51
Ld La 18
Li La 63
Recommended
minimum pulley
diameter
(mm)
Agreed between
vehicle and belt
manufacturers
Belt
weight
( kg/m)
0.070
0.118
Optibelt Marathon 1/Marathon 2 M=S automotive V-belts raw edge, moulded cogged, maintenance free
AVX 10
10 x 8
4.9
8.5
AVX 13
13 x 10
5.8
11.0
148
Outside
length
La
Ld La 13
Li La 51
Ld La 18
Li La 63
Agreed between
vehicle and belt
manufacturers
0.076
0.118
Applications
For transporting:
Construction/Quality
sheet glass
Temperature
resistance
(C)
SBR-NR/
light coloured
40 to + 70
CR/black
25 to + 100
Hardness
Oil
(Shore A) resistance Marking
55*
65**
65
no
no
Here are just a few examples from the wide range of applications
in which Optibelt conveyor belts are used successfully.
doors, cupboard components, veneer and plastic panels in the
woodworking industry
body parts and sharp-edged sheet metal panels in the automobile industry
cardboard and boxes in the packaging industry
roof tiles, concrete slabs and paviors in cement works
tiles
parcels
bowling alley balls
In addition to conveyor applications, these belts are also used for:
labelling and closing tins, bottles and jars in the preserves industry
lifting, topping and sorting beet, potatoes, lettuce, cauliower
and sprouts and many other vegetables
Because of their single belt characteristics and high permissible
surface loading, Optibelt KB Kraftbands are especially suitable in
conveyor systems and lifting platforms for:
transporting cargo container
loading and unloading aeroplanes and railway wagons
limited
yes
Properties
Special surfaced belts are used in place of expensive conventional
type conveyor belts. They run individually, or in sets arranged
adjacent to each other, transporting goods horizontally, or up or
down inclines. Vertical conveying is also possible if the belts are
arranged top surface to top surface gripping the articles between
them.
149
PKR 2
Height of surface
Groove
width
(mm)
Design/Colour
Pattern
Standard
(mm)
Maximum
(mm)
(mm)
PKR 0
SBR-NR/light
PKR 1
10
CR/black
PKR 2
PKR 3
3.7
Table 77
Section
3V/9J
5V/15J
8V/25J
SPB
Cross-sectional dimensions
of the base belt
(mm)
Kraftband height
without top surface
(mm)
9x 8
15 x 13
25 x 23
16.3 x 13
9.9
15.1
25.5
15.6
A/HA
13 x 8
9.9
B/HB
C/HC
17 x 11
22 x 14
13.0
16.2
150
Pitch
PKR 3
Hardness
(Shore A)
Oil
resistance
Marking
40 to + 70
55
no
no
25 to + 100
65
limited
yes
Length
designation
500 1 400
500 3 550
1 000 4 750
Temperature
resistance
(C)
Length
(mm)
1 400
1 400
2 540
2 400
1 400
2 850
1 400
2 286
3 556 La
9 017 La
12 065 La
6 000 Ld
5 000 Li
8 000 Li
7 100 Li
7 100 Li
Max.
production length
(mm)
PKR 0
PKR 1
PKR 2
PKR 3
4 250
10 000
15 000
6 000
8 000
on request
10 000
12 000
Pattern type
Range: see page 30, 31 and 33. Minimum order quantity on request.
PKR 0
PKR 1
PKR 2
Table 78
PKR 5
Table 79
Heigth of top surface
Pattern
PKR 0
Standard
(mm)
maximum
(mm)
Pitch
(mm)
Groove
width
(mm)
PKR 1
10
PKR 2
PKR 5
13
Temperature
resistance
(C)
Design/Colour
SBR-NR/light
CR/black
Hardness
(Shore A)
40 to + 70 55*/65**
25 to + 100
65
Oil
resistance
Marking
no
limited
no
yes
Table 80
Table 81
Top surfaces 3 or 5 mm
above the standard height
StandSection
ard
height
(mm)
Pattern type
Standard
inside length (mm)
PKR 0
PKR 1
PKR 2 PKR 5
for standard
range
(as listed
on pages
24 to 27)
for intermediate
length
(sizes not listed
in this technical
manual)
Standard
inside length
(mm)
Pattern type
PKR 0
PKR 2
Minimum
quantitiy
8.0
1 200 5 0001)
18 pcs
31 pcs
3 550 10 0001)
10
B/17 11.0
1 200 2 0001)
2 001 7 1001)
15 pcs
15 pcs
50 pcs
42 pcs
2 850 21 0001)
10
20
12.5
1 850 2 0002)
2 001 8 0002)
13 pcs
13 pcs
21 pcs
36 pcs
3 550 21 0001)
C/22 14.0
1 850 2 0002)
2 001 10 0002)
12 pcs
12 pcs
57 pcs
48 pcs
3 550 21 0001)
25
16.0
1 850 2 0002)
2 001 10 0002)
11 pcs
11 pcs
51 pcs
42 pcs
2 850 21 0001)
D/32 20.0
2 850 12 5002)
2 850 12 5002)
3)
9 pcs
8 pcs
22 pcs
8 pcs
2 850 21 0001)
on request
on request
4 000 21 0001)
A/13
E/40 25.0
When ordering, please state the overall height of the V-belt including top surface.
This is indicated by the section designation as follows.
151
PKR 0
PKR 1
PKR 2
Table 82
Section
PKR 0
CR/red brown
PKR 0
SBR-NR/light coloured
PKR 1
PKR 2
Z/10
A/13
B/17
C/22
25
D/32
S = Standard; P = Polyester
Table 83
Pattern types
PKR 0
PKR 1
A/13;
B/17;
C/22
Table 84
Top surface height
Pitch
Standard
(mm)
Max.
(mm)
(mm)
10
Temperature
resistance
(C)
Hardness
Oil
(Shore A) resistance Marking
PKR 0
CR/red brown
25 to + 100
50
limited
no
SBR-NR/light
coloured
40 to + 70
45
no
no
NR/red brown 40 to + 70
48
no
no
SBR-NR/light
coloured
40 to + 70
45
no
no
CR/red brown
25 to + 100
50
limited
no
CR/black
25 to + 100
68
limited
yes
PKR 1
25; D/32
10
PKR 2
152
Design/
Colour
Section
8
Z/10
A/13
B/17
C/22
Width x Height
(mm)
8x 5
10 x 6
13 x 8
17 x 11
22 x 14
Length of roll
(m)
Diameter
(mm)
Length of roll
(m)
Weight
( kg/m)
50
50
50
50
25
2
3
4
5
6
7
8
10
12
15
200
200
200
200
100
100
100
100
50
50
0.004
0.009
0.016
0.024
0.035
0.048
0.064
0.096
0.132
0.211
Optibelt RR round section belting and Optibelt KK plastic V-belting are especially suited as transporting elements in the food industry, in ceramic industry
plants, and for applications where oils and chemicals might be present.
They can also be used as drive elements for specic ranges of capacity. Optibelt
supplies different qualities that can be easily distinguished due to their different
colours.
mm
mm
mm
mm
optibelt KK Plastic V-Belting with Special Top Surface (base belt white, 92 Shore A)
Plastic V-Belting with Pointed Top Prole
Supergrip
Linatex
HV 2-Laminate
Section
Width x Height
(mm)
Length of roll
(m)
8
Z/10
A/13
B/17
C/22
8x 5
10 x 6
13 x 8
17 x 11
22 x 14
50
50
50
50
25
Form 1
Form
1
2
1
2
1
2
Form 2
Section
A/13
A/13
B/17
B/17
C/22
C/22
Length of roll
(m)
25
25
25
25
25
25
153
Annex
Table of Standards
109 Sheet 1
109 Sheet 2
111
111 Sheet 2
2211 Sheet 1
2211 Sheet 2
2211 Sheet 3
2215
22
63
99
100
155
254
255
ISO 1081
ISO 1604
ISO
ISO
ISO
ISO
1813
2230
2790
3410
ISO 4183
ISO 4184
ISO 5256
ISO 5287
ISO 5288
154
ISO 5289
ISO 5290
ISO 5291
ISO 5292
ISO
ISO
ISO
ISO
ISO
5294
5295
5296
8370-1
8370-2
ISO/DIS 8419
ISO/CD 9010
ISO/CD 9011
ISO 9563
ISO 9980
ISO 9981
ISO 9982
ISO 9982
ISO 11749
ISO 12046
ISO/CD 13050
ISO/CD 17396
United Kingdom
BS 3733
BS 3790
BS AU 150
USA
RMA/MPTA IP-20
RMA/MPTA IP-21
RMA/MPTA IP-22
RMA/MPTA IP-23
RMA/MPTA IP-24
RMA/MPTA IP-25
RMA/MPTA IP-26
RMA/MPTA IP-27
ASAE S 211. ...
SAE J636b
SAE J637
Notes
155
Notes
156
Data Sheet
for Calculation/Check of Drive
Optibelt GmbH
Company
Corveyer Allee 15
37671 Hxter/Germany
Tel. +49 (0 )5271/ 62 -1
Fax +49 (0 )52 71/ 9762 00
info@optibelt.com
www.optibelt.com
(stamp)
Fitted with:
For test
New drive
Existing drive
Number
Prime Mover
Type
______________________________
Type
___________________________
Start:
loaded
unloaded
Nature of load:
constant
pulsating
________________________________________
_________________________________
per hour
per day
per minute
per hour
Power:
Manufacturer
Driven Machine
Size
P normal ________________________________________kW
shock
Rating:
P normal __________________________________kW
P maximum ______________________________________kW
P maximum ________________________________kW
Speed n1 ______________________________________________r.p.m.
Speed
Position of shafts:
horizontal
n2 _____________________________________r.p.m.
vertical
angled
n2 min __________________________________r.p.m.
<) _____________________
n2 max __________________________________r.p.m.
dd1
________________ mm
da1
__________________mm
Centre distance
a _______________ mm
Tension/guide pulleys:
__________________
dd2
________________ mm
da2
__________________mm
___________
imax _________________
amin
________ mm
amax _____________ mm
inside
outside
dd __________________mm V-pulley
movable
xed
________________________________ C minimum
______
________________________________ C maximum
Exposure to oil
___________________________
water
(e.g. spray)
__________________________________
acid
dust
(type)
____________________
______________________________________
Special conditions: Where the drive is subjected to unusual conditions, e.g. inside or outside idler
pulleys, three or multi-pulley drives, as well as drives with reverse rotational
direction, sketches are required. Please use the back of this data sheet for sketches.
157
Drive description:
158
Data Sheet
for Calculating/Checking Conveyor Systems
Optibelt GmbH
Company
Corveyer Allee 15
37671 Hxter/Germany
Tel. +49 (0 )5271/ 62 -1
Fax +49 (0 )52 71/ 9762 00
info@optibelt.com
www.optibelt.com
(stamp)
For one off use
New drive
Existing drive
Fitted with:
Number
Section length
__________________________________________
___________________________
_________________________________
Start
under load
unloaded
_________
_______________________ hours
per hour
per day
Supporting pulleys
V-pulleys
Flat pulleys
Bearings
plain
ball
at
V-grooved
________________________________________
P normal ________________________________________kW
P maximum ______________________________________kW
Continuously variable
yes
no
Material to be conveyed
Type
__________________________________________
________________ mm
da1
__________________mm
round
sharp
rough
smooth
Conveyed
horizontally
vertically
inclined
da ______________________mm
<) ____________________
downwards
upwards
continuous
cycled
collected
________________ mm
da2
__________________mm
horizontal
angled
vertical
<) _____________________
mm __________ + mm
Tension/guide pulleys:
inside
Operating Conditions
Ambient temperature
____________________________ C minimum
____________________________C maximum
Exposure to oil
_______________________
water
(e.g. spray)
acid
dust
(type)
_____________________________
________________
_________________________________
yes
no
outside
dd ______________________ mm
da ______________________mm
159
Reproduction forbidden. Any infringements will be prosecuted under the copyright act law. Subject to correction.
The Optibelt offer is intended for specialised trade only. Optibelt recommends that its products be used exclusively according to the recommendations in Optibelt documentation. Due to safety recommendations, the application of Optibelt drive belts in planes or in systems similar to planes is not permissible. Optibelt does not assume any liability
if its products are used in applications for which they have not been designed or manufactured. For the rest, Optibelt refers to its General Terms and Conditions.
The valid terms and conditions are available at www.optibelt.com
160
optibelt VB
Klassische Keilriemen
Classical V-belts
optibelt SK
Schmalkeilriemen
Wedge belts
optibelt KB
Kraftbnder
Kraftbands
optibelt KB
RED POWER II
Hochleistungs-Kraftbnder
High performance kraftbands
optibelt KBX
Kraftbnder, ankenoffen
Kraftbands, raw edge
optibelt PKR
Endlose Keilriemen mit Auage
Endless V-belts with special
top surfaces
optibelt SUPER VX
Breitkeilriemen, ankenoffen,
formgezahnt
Variable speed belts,
raw edge, moulded cogged
optibelt DK
Doppelkeilriemen
Double section V-belts
optibelt ZR
Zahnachriemen
Timing belts
optimat OE
Endliche Keilriemen
DIN 2216, gelocht
Open-ended V-belting,
punched
optibelt RR
Kunststoffrundriemen
Plastic round section
belting
optibelt OMEGA
Zahnachriemen, wartungsfrei
Timing belts, service-free
optibelt RB
Rippenbnder
Ribbed belts
optibelt OMEGA HL
optibelt OMEGA HP
Hochleistungs-Zahnachriemen,
wartungsfrei
High performance timing belts,
maintenance free
optibelt KK
Kunststoffkeilriemen
Plastic V-belting
optibelt HTD D
Doppel-Zahnachriemen
Double section timing belts
optibelt ALPHA
optibelt ALPHA linear/ V
optibelt ALPHAex
Zahnachriemen aus Polyurethan
Polyurethane timing belts
www.optibelt.com
optibelt KS
Keilrillenscheiben
V-grooved pulleys
optibelt ZRS
Zahnriemenscheiben
Timing belt pulleys
optibelt RBS
Rippenbandscheiben
Ribbed belt pulleys