Professional Documents
Culture Documents
For "Stamod Engineering": SFTP CAE Analysis Proposal
For "Stamod Engineering": SFTP CAE Analysis Proposal
Date : 20/03/2015
P.1
Burst Test
Objective:
Procedure
Inputs
To validate the Assembly for 30 Bar pressure and evaluate if assembly has cracks or permanat
deformations. For detailed loading see Appendix 1
Outputs
Executive report with contours and animation of deformations, strain, stress and predicting if
assembly has cracks or permanant deformations
P.2
Burst Test
Assumption:
Out of scope
CAD Modifictaions
CAE Optimisation
Duration
Material is assumed to be isentropic, i.e. material properties are same in all the directions
No material faiure is considered in analysis
Analysis is carried out at room temperature i.e. 23 deg C
7 working days
Cost
P.3
Dynamic Durablity
Objective:
Procedure
Inputs
To evaluate the life of assembly in number of cycles under the given loading in appendix 2.
Outputs
executive report with contours and animation of deformations, strain, stress and Life of assembly
P.4
Dynamic Durablity
Assumption:
Out of scope
CAD Modifictaions
CAE Optimisation
Duration
Material is assumed to be isentropic, i.e. material properties are same in all the directions
The Goodman theory is used to evaluate the fatigue life
The fatige correction factors to be taken from standard refernce if not avaliable
Analysis is carried out at room temperature i.e. 23 deg C
12working days
Cost
P.5
P.6
P.7