Professional Documents
Culture Documents
Damper Selection Guide
Damper Selection Guide
Product Information
Damper actuators
NM
i0027811
2. NM-4
B
C
LM
NM
SM
AM
GM
LF
AF(R)
4 Nm
8 Nm
15 Nm
18 Nm
30 Nm
4 Nm
15 Nm
0.8 m2
1.5 m2
3 m2
3.6 m2
6 m2
0.8 m2
3 m2
Torque
Type
i0098805
The complete range of damper actuators for general use in HVAC systems
For more information, please contact your Belimo Representative or order any brochures you need by fax.
SM...
AM...
GM...
LF...
AF...
AFR...
Electrical accessories
Country:
Tel.:
Fax:
E-Mail:
Date:
B
C
Contents
Selection table
NM
24
NM
23
0
Torque
8 Nm
Nominal voltage
AC 24 V
DC 24 V
AC 230 V
75...150 s
150 s
Running time
Control
Open/Close
Modulating
Single-wire
2-wire
DC 0...10 V
NM
24
-S
R
NM
24
-S
RS
Actuators with damper rotation for square form-fit spindles (8 mm) and conforming to US standards on request.
NM230
NM24-SRS
Note
Electrical accessories
Using BELIMO damper actuators
The actuators listed in this catalogue are intended for the operation of air dampers in
HVAC systems.
Torque requirements
When calculating the torque required to operate
dampers, it is essential to take into account all
the data supplied by the damper manufacturer
concerning cross sectional area, design, mounting and air flow conditions.
Mounting instructions
Damper actuators
10
Auxiliary switches
10
3
B
C
p0004803
Simple installation
The damper actuator is fitted with a universal spindle clamp for quick and easy
mounting directly on the damper spindle.
The actuator is supplied with an antirotation strap for fixing it in position.
Wiring diagram
~
+
2-wire control
AC 24 V
DC 24 V
Single-wire control
T
Electrical accessories
SN1, SN2 Auxiliary switches, page 9
AC 24 V
DC 24 V
AC 24 V 50/60 Hz, DC 24 V
AC/DC 19.2...28.8 V
3.5 VA
Power consumption
2W
Connecting cable
Direction of rotation
Torque
Angle of rotation
Running time
max. 35 dB (A)
Position indication
mechanical
Protection class
III
Degree of protection
139
26.5
105.6
6.9
Maintenance
maintenance free
Weight
800 g
8...20
Dimensions
NM24
Nominal voltage
d0003902
Technical data
NM24
58
5.2
NM24
81
36.5
22
w0345805
Important
Read the notes about the use and torque
requirements of the damper actuators on
page 3.
B
C
p0005803
Wiring diagram
AC 230 V
N L1
Electrical accessories
SN1, SN2 Auxiliary switches, page 9
Mounting instructions, page 10
NM230
AC 198 264 V
50/60 Hz
18 VA
Power consumption
2W
Connecting cable
Direction of rotation
Torque
Angle of rotation
Running time
max. 35 dB (A)
Position indication
mechanical
Protection class
II (all insulated)
Degree of protection
Dimensions
8...20
139
26.5
105.6
6.9
Maintenance
maintenance free
Weight
800 g
d0003902
AC 230 V
58
Nominal voltage
81
Technical data
5.2
NM230
36.5
22
w0346805
Important
Read the notes about the use and torque
requirements of the damper actuators on
page 3.
B
C
Y U NM24-SR
Technical data
Nominal voltage
Nominal voltage range
For wire sizing
Power consumption
Connecting cable
Control signal Y
Operating range
Measuring voltage U
Synchronisation tolerance
NM24-SR
AC 24 V 50/60 Hz, DC 24 V
AC 19.2...28.8 V, DC 21,628.8 V
3 VA
1.3 W running, 0.5 W at rest
1 m long, 4 0.75 mm2
DC 010 V @ input resistance = 100 k
DC 210 V (for 0100% angle of rotation)
DC 210 V @ 0.7 mA (for 0100% angle of rotation)
5%
Override control
Y open or 0 V
Y at AC 24 V
Direction of rotation
(at Y = 0 V)
Torque
Angle of rotation
= 0% angle of rotation
= 100% angle of rotation
Running time
max. 35 dB (A)
mechanical
III
139
Simple installation
The damper actuator is fitted with a universal spindle clamp for quick and easy
mounting directly on the damper spindle.
The actuator is supplied with an antirotation strap for fixing it in position.
26.5
105.6
6.9
U DC 210 V
d0003902
81
T
1
Y DC 0...10 V
5.2
w0347211
AC 24 V
!
DC 24 V
58
Wiring diagram
Automatic commissioning,
easy functional check
When the power supply is first switched
on, or when the override push button is
pressed, the actuator performs an automatic function test. It runs to each end
position and, in the process, adapts its
electrical working range of DC 210 V
and running time of 150 s to the effective
mechanical angle of rotation of the
damper. After performing this function,
the actuator moves to the position demanded by the positioning signal.
A functional check of damper operation
is simplicity itself: the gearing can be
disengaged by simply pressing a pushbutton on top of the case. While the
pushbutton remains depressed, the
damper can be operated by hand.
36.5
22
p0006803
B
C
Y U NM24-SRS
Technical data
Nominal voltage
Nominal voltage range
For wire sizing
Power consumption
Connecting cable
Control signal Y
Starting point Uo
Span U
Factory setting
Measuring voltage U
Synchronisation tolerance
Override control
Direction of rotation
(at Y = 0 V)
Torque
Angle of rotation
Running time
Sound power level
Position indication
Protection class
Degree of protection
Ambient temperature range
Non-operating temperature
Humidity test
EMC
Maintenance
Weight
NM24-SRS
AC 24 V 50/60 Hz
AC 19.2...28.8 V
3 VA
1.3 W running, 0.5 W at rest
1 m long, 4 0.75 mm2
DC 018 V @ input resistance = 100 k
adjustable DC 08 V
adjustable DC 210 V (for 0100% angle of rotation)
Uo = DC 0 V, U = DC 10 V
DC 210 V @ 0.7 mA (for 0100% angle of rotation)
5%
Y open or 0 V
= 0% angle of rotation
Y at AC 24 V
= 100% angle of rotation
selected with L/R switch
at switch position L resp. R
min. 8 Nm (at rated voltage)
max. 95 (adjustable by mechanical stops)
150 s, regardless of the mechanically limited angle
of rotation from 035 to 095
max. 35 dB (A)
mechanical
III
w0348805
U DC 2...10 V
Simple installation
The damper actuator is fitted with a universal spindle clamp for quick and easy
mounting directly on the damper spindle.
The actuator is supplied with an antirotation strap for fixing it in position.
Electrical accessories *(see Doc. 2. Z-)
SN1, SN2 Auxiliary switches, page 9
*SG24
Positioners
*ZAD24
Digital position indicator
Control and monitoring functions, page 8
Mounting instructions, page 10
Important
Read the notes about the use and torque
requirements of the damper actuators on
page 3.
Dimensions
8...20
139
26.5
105.6
6.9
d0003902
Y DC 0...10 V
(DC 8...18 V)
Control manufacturers: ABB, AEG, Blz, Centra, Controlli, C.S.I., Danfoss, DIGIControl, Elesta, GA, H.C.
System, Honeywell, Inel, IWK, Johnson, Kieback & Peter,
Landis & Staefa, Messner, Priva, RAM R+S, Samson,
Satchwell, Sauter, SE-Electronic, Siemens, TA, Trend.
81
5.2
AC 24 V !
Automatic commissioning,
easy functional check
When the power supply is first switched
on, or when the override push button is
pressed, the actuator performs an automatic function test. It runs to each end
position and, in the process, adapts its
electrically defined working range and
running time of 150 s to the effective
mechanical angle of rotation of the
damper. After performing this function,
the actuator moves to the position demanded by the positioning signal.
A functional check of damper operation
is simplicity itself: the gearing can be
disengaged by simply pressing a pushbutton on top of the case. While the
pushbutton remains depressed, the
damper can be operated by hand.
58
Wiring diagram
36.5
22
p0007803
B
C
SGA24, SGF24
SGE24
Connect via
safety isolating
transformer
!
T
Y Z
AC 24 V
Connect via
safety isolating
transformer
AC 24 V
w0349211
Minimum position
Y Z
3
SGA24, SGF24
SGE24
Positioner
Y[V]
10 V
Positioner
Y DC 0...10 V
(from controller)
NM24-SR(S)
4
0V
Y U
NM24-SR(S)
Position indication
AC 24 V
DC 24 V
~
+
Connect via
safety isolating
transformer
AC 24 V
Connect via
safety isolating
transformer
Y DC 0...10 V
1
Reversing
switch L
Y U
NM24-SR(S)
control mode
~
+
ZAD24
4
1
Reversing
switch R
Direction of
rotation
a
1
100%
Angle of rotation
Override control
0%
Y U
min.
Y U
NM24-SR(S)
Connect via
safety isolating
transformer
Y DC 0...10 V
Note 5% synchronisation
tolerance between actuators
to next actuator
Y U
NM24-SR(S)
Master
actuator
Y U
NM24-SR(S)
Slave
actuator
Function monitoring
T
1
~
+
AC 24 V
DC 24 V
Connect via
safety isolating
transformer
Y U
Procedure
NM24-SR(S)
AC 24 V
DC 24 V
B
C
p0008707
Wiring diagram
S1 S2 S3 S4 S5 S6
SN1
Technical data
SN2
SN1
SN2
Number of switches
1 SPDT
2 SPDT
Switching capacity
6 A (2.5 A) AC 250 V
Connecting cable
1 m, 3 0.75 mm2
Switching point
Protection class
II (all-insulated)
Degree of protection
IP 54
1 m, 6 0.75 mm2
125 g
175 g
m0008707
S1 S2 S3
w0009707
Note
Instructions for fitting and setting the
switches will be found on page 10.
B
C
m0009807
m
8
.3
in
m
m
3
8...20
6...7 Nm
1mm
3
10
m0010707
B
C
11
Air applications
Water applications
Belimo Headquarters
CH BELIMO Holding AG
Brunnenbachstrasse 1
8340 Hinwil, Switzerland
Tel. +41 (0)43 843 61 11
Telefax +41 (0)43 843 62 68
E-Mail: info@belimo.ch
Internet: www.belimo.ch
Belimo Subsidiaries
AT/ BELIMO Automation
HR/ Handelsgesellschaft m.b.H.
HU/ Geiselbergstrasse 2632
SK/ 1110 Wien, Austria
SL Tel. +43 (0)1 749 03 61-0
Telefax +43 (0)1 749 03 61-99
E-Mail: info@belimo.at
AU BELIMO Actuators Pty. Ltd.
Unit 10, 266 Osborne Avenue
Clayton South, VIC 3169
Australia
Tel. +61 (0)3 9551 0201
Telefax +61 (0)3 9551 0215
E-Mail:
belimo@belimoactuators.com
CA BELIMO Aircontrols (CAN), Inc.
5716 Coopers Ave., Units 14&15
Mississauga, Ontario L4Z 2E8
Canada
Tel. +1 (1)905 712 31 18
Telefax +1 (1)905 712 31 24
E-Mail: webmaster@belimo.com
CH BELIMO Automation AG
Sales Switzerland
Brunnenbachstrasse 1
8340 Hinwil, Switzerland
Tel. +41 (0)43 843 62 12
Telefax +41 (0)43 843 62 66
E-Mail: info@belimo.ch
Internet: www.belimo.ch
DE BELIMO Stellantriebe
Vertriebs GmbH
Welfenstr. 27, Postfach 72 02 30
70599 Stuttgart, Germany
Tel. +49 (0)711 1 67 83-0
Telefax +49 (0)711 1 67 83-73
E-Mail: info@belimo.de
Internet: http://www.belimo.de
ES BELIMO Ibrica
de Servomotores, S.A.
C/San Romualdo, 1214
28037 Madrid, Spain
Tel. +34 91 304 11 11
Telefax +34 91 327 25 39
E-Mail: info@belimo.es
FR
GB
HK
PL
SG
US
BELIMO Servomoteurs
Z.A. de Courtry
33, Rue de la Rgale
77181 Courtry, France
Tl. +33 (0)1 64 72 83 70
Tlfax +33 (0)1 64 72 94 09
E-Mail: mail@belimo.fr
BELIMO Automation UK Limited
The Lion Centre
Hampton Road West
Feltham, Middlesex, Great Britain
TW 13 6DS
Tel. +44 (0)20 8755 4411
Telefax +44 (0)20 8755 4042
E-Mail: belimo@belimo.co.uk
BELIMO Actuators Ltd.
Room 208, 2/F
New Commerce Centre
19 On Sum Street, Shatin, N.T.
Hong Kong
Tel. +852 26 87 17 16
Telefax +852 26 87 17 95
E-Mail: info@belimo.com.hk
BELIMO Silowniki S.A.
ul. Zagadkl 21
02-227 Warszawa, Poland
Tel. +48 (0)22 886 53 05
Telefax +48 (0)22 886 53 08
E-Mail: info@belimo.pl
BELIMO Actuators Pte Ltd
2, Jurong East Street 21
#04-31F IMM Building
Singapore 609601
Tel. +65 6564 9828
Telefax +65 6564 9038
E-Mail: info@belimo.com.sg
BELIMO Aircontrols (USA), Inc.
43 Old Ridgebury Road
P.O. Box 2928
Danbury, CT 06810 USA
Tel. +1 (1)203 791 99 15
Telefax +1 (1)203 792 29 67
E-Mail: webmaster@belimo.com
Internet: www.belimo.com
BG
CN
CN
CY
CZ
DK
EE
FI
GR
IE
PH
RO
RU
SE
SY
TR
TW
UA
ZA