Professional Documents
Culture Documents
Durathane Matt - Comp A
Durathane Matt - Comp A
Durathane Matt - Comp A
Product Use *
2. Composition/information on ingredients
Chemical Name Of Compound Liable To
Label.
XYLENE
N-BUTYL ACETATE
CAS no.
1330-20-7
123-86-4
%
15-25
5-10
Classification
Xn
F
3. Hazards Identification
The preparation is classified as dangerous according to Directive 1999/45/EC and its amendments.
Flammable
Harmful by inhalation and in contact with skin.
Irritating to skin.
Harmful
Harmful to aquatic organisms. May cause long term adverse effects in the aquatic environment.
* Refer Product Technical Data Sheets for details.
4. First-Aid Measures
General
Inhalation
: Remove to fresh air. Keep person warm and at rest. If not breathing, if
breathing is irregular or if respiratory arrest occurs, provide artificial
respiration or oxygen by trained personnel. Give nothing by mouth. If
unconscious place in recovery position and seek medical advice.
Skin Contact
Eye Contact
VERSION : 1
: Check for and remove any contact lenses. Immediately flush eyes with
running water for at least 15 minutes, keeping eyelids open.
Page 1 of 4
Ingestion
5. Fire-Fighting Measures
Extinguishing Media
Recommendations
: Fire will produce dense black smoke. Exposure to decomposition products
may cause a health hazard. Appropriate breathing apparatus may be required. Cool closed containers
exposed to fire with water. Do not release runoff from fire to sewers or waterways.
: Exclude sources of ignition and ventilate the area. Avoid breathing vapour
or mist. Refer to protective measures listed in sections 7 & 8.
Spill
: Vapours are heavier than air and may spread along floors. Vapours may form explosive
mixtures with air. Prevent the creation of flammable or explosive concentrations of vapour in air and avoid vapour
concentration higher than the occupational exposure limits. In addition, the product should only be used in areas from
which all naked lights and other sources of ignition have been excluded. Electrical equipment should be protected to the
appropriate standard. To dissipate static electricity during transfer, earth drum and connect to receiving container with
bonding strap. Operators should wear anti-static footwear and clothing and floors should be of the conducting type.
Keep container tightly closed. Keep away from heat, sparks and flame. No sparking tools should be used. Avoid contact
with skin and eyes. Avoid the inhalation of dust, particulates and spray mist arising from the application of this
preparation. Avoid inhalation of dust from sanding. Eating, drinking and smoking should be prohibited in areas where
this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and
smoking. Put on appropriate personal protective equipment (see section 8) Never use pressure to empty : container is
not a pressure vessel. Always keep in containers of same material as the original one. Comply with the health and safety
at work laws. When operators, whether spraying or not, have to work inside the spray booth, ventilation which is
unlikely to be sufficient to control particulates and solvent vapours should wear a compressed air-fed respirator during
the spraying process and until such time as the particulates and solvent vapour concentration has fallen below the
exposure limits.
Storage
Keep away from : Oxidizing agents, strong alkalis, strong acids. No Smoking. Prevent unauthorized access. Containers,
which are opened, must be carefully resealed and kept upright to prevent leakage. Do not empty into drains.
VERSION : 1
Page 2 of 4
Hands
: For prolonged or repeated handling, use gloves : polyvinyl alcohol or nitrile. Barrier
creams may help to protect the exposed areas of the skin, they should however not be applied once
exposure has occurred.
Eyes
: Liquid
: Characteristic
: Various Colours
: 31C 2
: Not applicable
: 1.55 1.65 Kg/m3
: Insoluble in cold water
VERSION : 1
Page 3 of 4
Class
Packing Group
ADR/RID
CLASS
1263
PAINT
III
IMDG CLASS
1263
PAINT
III
IATA-DGR
CLASS
1263
PAINT
III
Label
Transport in accordance with ADR/RID, IMDG/IMO AND ICAO/IATA and National Regulations.
: Harmful.
Risk Phrases
: R10- Flammable
Safety Phrases
Harmful
:
:
:
:
01.06.2003
01.06.2003
24.04.1997
1
HISTORY
Date of printing
Date of Issue
Date of previous version
Version
Notice to Reader
The information of this SDS is based on the present state of our knowledge. The product is not to be used for other purposes than those
specified under section 1 without first Obtaining written handling instruction. It is always the responsibility of the user to take all
Necessary steps in order to fulfil the demand laid down in the local rules and regulations. The information in this SDS is meant as a
description of the safety requirements of our Product : It is not to be considered as a guarantee of the product properties.
Jotun is a World Wide company with factories, sales offices and stocks in more than 50 countries. For your
nearest local Jotun address please contact the nearest regional office or visit our website at www.jotun.com
This Safety Data Sheet Supersedes those previously issued.
VERSION : 1
Page 4 of 4