Professional Documents
Culture Documents
Slick Line BOP
Slick Line BOP
Slick Line BOP
No :
1007_T
Rev :
The BDK Wireline Valve is available as either Hydraulic models with Single or Dual Ram options
or Single Ram Manual models. Provision is made on all Hydraulic models to manually close the
rams. Hydraulic models are recommended when frequent use is anticipated or where safety
concerns dictate remote operation.
Features on BDK Wireline Valves :
Rugged forged mono-block style bodies rated for 10,000 psi working pressure, H2S Service
External vent holes provided with check valves to prevent ingress of foreign matter.
Rugged, flush mounting Equalising Valve with Positive Communication Tube seal
arrangement allowing equalisation of pressure above and below the rams.
Quick Union connections with integral bolt on Flanged connections for ease of
interchangeability.
Guide Rods are supplied as standard which facilitate Ram Seal inspections and inversion
of Rams on the Dual Ram Models eliminating manual lifting.
Manual activation on Hydraulic models via a Non-Rising Stem carried in bronze bushes
and thrust bearings. The unit is held in place by a Quick Union style connection, providing
for quick and efficient assembly. Provision is made for lubricating the drive shaft and
careful attention to detail has eliminated rotating shafts passing through critical seals.
Inner and Outer Ram Seals are interchangeable with most leading manufacturers.
All BDK Wireline Valves comply with API 6A PSL3, SI 1996/913 and NACE MR-01-75 for Sour
(H2S) Service and are supplied complete with Certified Lifting Cap.
Page 1 of 4
This document is the property and copyright of B D Kendle Engineering Limited and may not be copied or reproduced in anyway without
permission.
B D Kendle Engineering Limited reserve the right to change information without notification
No :
Rev :
1007_T
2
3.062"
4.125"
5.125"
6.375"
Height
31.75"
34.25"
40"
48.9"
Width
50"
59.7"
63.4"
73"
Thickness
9.31"
11.75"
12.75"
14"
Page 2 of 4
This document is the property and copyright of B D Kendle Engineering Limited and may not be copied or reproduced in anyway without
permission.
B D Kendle Engineering Limited reserve the right to change information without notification
No :
1007_T
Rev :
3.062"
4.125"
5.125"
6.375"
Height
40"
45.5"
53.7"
63.4"
Width
50"
59.7"
63.4"
73"
Thickness
10.62"
13"
13.5"
14.75"
Page 3 of 4
This document is the property and copyright of B D Kendle Engineering Limited and may not be copied or reproduced in anyway without
permission.
B D Kendle Engineering Limited reserve the right to change information without notification
No :
1007_T
Rev :
3.062"
4.125"
5.000"
6.375"
Height
31.75"
34.25"
40"
48.9"
Width
36"
45.6"
47"
55"
Thickness
10.62"
13"
13.5"
14.75"
Page 4 of 4
This document is the property and copyright of B D Kendle Engineering Limited and may not be copied or reproduced in anyway without
permission.
B D Kendle Engineering Limited reserve the right to change information without notification
B D Kendle Engineering Ltd, Gapton Hall Road, Gapton Hall Industrial Estate, G Yarmouth, Norfolk NR31 ONL, UK
Tel : +44 (0) 1493 441155 Fax : +44 (0) 1493 657403 Email : Sales@bdkendle.co.uk Web : www.bdkendle.co.uk