Professional Documents
Culture Documents
SPEC Cable Trays
SPEC Cable Trays
TRAYS
Page 1 of 5
INDEX
1.0
INTRODUCTION...............................................................................................................3
2.0
3.0
SITE CONDITIONS...........................................................................................................3
4.0
TECHNICAL REQUIREMENTS.......................................................................................4
5.0
QUALITY ASSURANCE....................................................................................................4
6.0
7.0
PACKING.............................................................................................................................5
1.0
INTRODUCTION
This specification covers the technical requirements for the design, supply,
manufacture, testing, packing & delivery of the electrical cables trays to site
for establishment of xxxxxxxxx project.
2.0
1)
NEMA FGI-198X
ASTM E-84
2)
Supply of all other items, not specified here but, necessary for safe,
satisfactory and Supply of any other items required to make the system
completes as per this technical specification to the clients satisfaction
3.0
SITE CONDITIONS
The equipment and materials to be supplied and installed by the vendor shall
be suitable for continuous and trouble free operation at 50C.
Ambient Temp. (Max/Min)
43.90 C/6.70 C.
:
310mm.
88%.
1000 mbara.
Wind Velocity
Location
xxxxxxxxxx
4.0
TECHNICAL REQUIREMENTS
4.1
GENERAL REQUIREMENTS
All materials used in the manufacture of cable Trays shall comply with the
latest relevant applicable standards and shall be of such quality, type and
design to satisfy the following.
a.
b.
All cable trays and its associated accessories shall be made of the fiber
glass and shall be corrosion resistant and fire retardant (Class 1, Fire
rating) in accordance with the latest ASTM E-84.
c.
d.
e.
f.
5.0
QUALITY ASSURANCE
All materials supplied by Vendor shall be new and comply with the
specifications. When material are not specified on the specifications, Vendor
shall provide such material as are fit for the purposes for which they are to be
used and that have been proven to be resistant to those elements, pressures
and chemicals with which they are expected, in accordance with the
specifications, to come into contact.
The quality of the materials supplied by Vendor in accordance with the terms
set forth in this article may be verified at any time by Purchaser.
The Quality Plan shall be submitted by the vendor for review by the Client
and the Purchase shall be in accordance with the Test and Inspection
Procedure.
6.0
7.0
General Examination
Loading test
PACKING
The cable trays with accessories for installation shall be packed in suitable
crates to prevent damage during transportation.