Professional Documents
Culture Documents
1-GBT 3190-2008-Wrought Aluminium and Aluminium Alloy - Chemical Composition
1-GBT 3190-2008-Wrought Aluminium and Aluminium Alloy - Chemical Composition
10
H60
Foreword
The revision of this standard adopts ISO209: 2007 "Wrought Aluminium and Aluminium
Alloy - Chemical Composition" (English edition), and this standard is redrafted on the base of
ISO209: 2007. For comparing the international standard and this standard, the list of
corresponding chapters and sections of them is detailed as Annex B (Informative).
The revision is done while adopting the international standard. the technical differences are
marked with perpendicular single line on the page margin of involved articles or items, and they
are as follows:
Cancel the designation and composition of aluminium and aluminium alloy that haven't
be produced in China ever;
Cancel the table of comparison between new and old designations in the ISO standard;
Add four-letter designation and composition special in China;
Add the requirements for special control of toxic and harmful elements;
Add the requirements on composition analysis and sampling.
This standard replaces GB/T3190-1996 "Wrought Aluminium and Aluminium Alloy Chemical Composition". Compared with GB/T3190-1996, the main revisions in this standard are
as:
Add designations and compositions of 130 aluminiums and aluminium alloys, and
divided the Table of chemical composition into two parts (two tables): Table 1 is applicable to
international designations, covering 159 designations; Table 2 is applicable to four-letter
designations, covering 114 designations;
Add the requirements for special control of toxic and harmful elements;
Add the denotation (method) of limit value;
Revise "Table of Comparison between New and Old Designations"
Annex A and Annex B of this standard are informative.
This standard is proposed by China Non-ferrous Metals Industry Federation.
This standard is under the jurisdiction of the National Standardization Technical Committee of
Non-ferrous Metal.
Main drafting organizations: Northeast Light Alloy Co., Ltd., China Non-ferrous Metals
Industry Standard Measurement Quality Institute
Participating organization: Guangdong Jianmei Aluminium Profile Factory Co., Ltd., Fujian
Nanping Aluminium Co., Ltd., Gujian Minfa Aluminium Industry Co., Ltd., Southwest Aluminum
(Group) Co, Ltd., Guangdong Xingfa Aluminium Industry Co., Ltd.
Chief Drafting Staffs: Wu Xinfeng, Lu Xinyu, Guo Rui, Liu Zhengchao, Ge Lixin, Wang
Jianguo, Wang Guojun, Zhang Wanjin, Wang Lijun, Cao Yongliang, Li Chengli, Zhou Yaohui
All previously replaced editions hereof are as:
GB/T 3190-1982, GB/T 319-1996.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute
provisions of this standard. For dated reference, subsequent amendments to (excluding correction
to), or revisions of, any of these publications do not apply. However, the parties whose enter into
agreement according to these specifications are encouraged to research whether the latest editions
of these labels are applied or not. For undated references, the latest edition of the normative
document is applicable to these specifications.
GB/T 7999 Optical emission spectrometric analysis method of aluminum and aluminum
alloys
GB/T 8170 Rules for rounding off of numerical values
GB/T 16474 Wrought aluminium and aluminium alloy Designation system
GB/T 20975 Chemical analysis methods of aluminium and aluminium alloys (all parts)
3 Requirements
3.1 Chemical composition
3.1.1 The chemical compositions of wrought aluminiums and aluminium alloys shall meet the
requirements of Table 1 and Table 2. The column "others" indicates the metallic element not listed
in the table. The content in the table, as single numerical value, is the minimal limit for aluminium;
it is maximal limit for other elements. the denotation of limit value is as:
Limit Value of the total ferrum and silicon with the designation 1XXX 0. or 1.XX;
Other Limit Values:
<0.001%
0.000X;
0.001%~<0.01%
0.00X;
0.01%~<0.10%
0.0X;
0.10%~0.55%
0.;
>0.55%
0.X, X.X, XX.X, etc.
3.1.2 (Cd+Hg+Pb+Cr6+)0.01%, (AS)0.01% shall be controlled for aluminium and
aluminium alloy materials Used in food service industry; (Pb)0.1%, (Hg)0.l%,
(Cd)0.01%, W(Cr6+)0.1% Shall be controlled for the aluminium and aluminium alloy
materials used in electric appliance and equipment industry.
3.2 Sampling
3.2.1 Manufacturing plant shall sample chemical components from molten mass for analysis by
molten time; for continuous casting, a sample shall be selected once at least per shift.
3.2.2 The using plant shall be sample chemical component from processed products for analysis.
For sampling, representative specimen shall be selected, and it shall be clean and free from scale,
coating, dirt oily soil or lubricating oil. corrosion, oxygenation or pollution shall be prevented
affecting the composition of the specimen.
3.2.3 Sample in duplicate shall be selected: one is used for analyzing, and the other is for future
reference. The storage period of sample for future reference shall not be less than 1 year 1.
3.3 Composition analysis
3.3.1 Conventional chemical analysis is done for the numerical value specified elements, except
"aluminium" and "others", listed in Table 1 or Table 2.
3.3.2 Manufacturing plant shall do monitoring and analyzing for Cd+Hg+Pb and As element in
aluminium and aluminium alloy materials used in food service industry, and Pb, Hg, Cd and Cr6+
element in aluminium and aluminium alloy materials used in electric appliance and equipment
industry, so as to ensure that above elements meet the requirements of the standard.
3.3.3 When the mass fractions of some "other" elements not listed in Table 1 and Table 2 are
suspected to exceed the limits of "single" or "total" values specified in this standard, the
manufacturer may do analyses for these elements.
3.3.4 When the content (mass fraction) of aluminium is larger than or equal to 99.00% and less
than 99.90%, it shall be determined by the calculation (method) that 100.00% is deducted by the
sum of the contents of elements which the content is less than 0.010%. The content value of the
elements shall be rounded to 0.0x% before summing.
3.3.5 When the content (mass fraction) of aluminium is larger than or equal to 99.00% and less
than or equal to 99.99%, it shall be determined by the calculation (method) that 100.00% is
deducted by the sum of the contents of elements which the content is less than 0.0010%. the
content value of the elements shall be rounded to 0.0XX% before summing. The sum after
summing shall be rounded to 0.0X%.
3.3.6 The chemical components shall be analyzed by the method specified in GB/T 7999 or GB/T
20975, or other reliable and accurate method. in the case of controversy, the method specified in
GB/T 20975 or other method agreed by the parties must be used for arbitration analysis.
3.3.7 If the first analytic results does not meet the requirements, second analyses may be allowed,
and the second analytic result may regarded as the criteria for ex-works acceptance.
4 Others
4.1 The digit number of element contents in chemical composition analysis report shall be of
correspondence to the one of the corresponding designation specified in Table 1 or Table 2.
4.2 The rounding of numerical values shall meet the requirements of GB/T 8170.
4.3 The relation table of comparison for new and old designations is detailed in Annex A.
1) The storage period of sample (common use) for future reference may be reduced properly, and it shall not be
less than half year.
Table 1
Chemical composition (mass fraction) /%
No.
Designation
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Zr
Others
Single
Total
Al
1035
0.35
0.6
0.10
0.05
0.05
0.10
0.05V
0.03
0.03
99.35
1040
0.30
0.50
0.10
0.05
0.05
0.10
0.05V
0.03
0.03
99.40
1045
0.30
0.45
0.10
0.05
0.05
0.05
0.05V
0.03
0.03
99.45
1050
0.25
0.40
0.05
0.05
0.05
0.05
0.05V
0.03
0.03
99.50
1050A
0.25
0.40
0.05
0.05
0.05
0.07
0.05
0.03
99.50
1060
0.25
0.35
0.05
0.03
0.03
0.05
0.05V
0.03
0.03
99.60
1065
0.25
0.30
0.05
0.03
0.03
0.05
0.05V
0.03
0.03
99.65
1070
0.20
0.25
0.04
0.03
0.03
0.04
0.05V
0.03
0.03
99.70
1070A
0.20
0.25
0.03
0.03
0.03
0.07
0.03
0.03
99.70
10
1080
0.15
0.15
0.03
0.02
0.02
0.03
0.03Ga,0.05V
0.03
0.02
99.80
11
1080A
0.15
0.15
0.03
0.02
0.02
12
1085
0.10
0.12
0.03
0.02
0.02
0.06
0.03Ga
0.02
0.02
99.80
0.03
0.03Ga,0.05V
0.02
0.01
99.85
0.05
0.15
99.00
13
1100
0.95Si+Fe
005~020
0,05
0.10
1200
1.00Si+Fe
0.05
0.05
0.10
0.05
0.05
0.15
99.00
15
1200A
1.00Si+Fe
0.10
0.30
0.30
0.10
0.10
0.05
0.15
99.00
0.05~0.35
0.01
0.20
0.01
0.05
0.03Ga,0.05B,0.02V+Ti
0.03
0.10
99.20
0.70Si+Fe
0.10
0.05
0.05
0.10
0.05V
0.03
0.03
99.30
0.65Si+Fe
0.05
0.05
0.05
0.10
0.05V
0.06
0.03
99.35
0.02
0.05
0.05
0.10
0.05V
0.03
0.03
99.35
0.05
0.05
0.05
0.05
0.05V
0.03
0.03
99.45
0.10
0.05
0.05
0.05
0.05V
0.03
0.03
99.45
16
17
1120
0.10
1230
18
1235
19
1435
20
1145
21
1345
0.15
0.40
0.30~0.50
0.55Si+Fe
0.30
0.40
Table 1 (continued)
Chemical composition (mass fraction) /%
No.
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Others
Zr
Single
22
23
1350
1450
0.10
0.40
0.25
0.05
0.40
0.05
0.01
0.05
0.01
99.75
0.03Ga, 0.05V
0.02
0.01
99.85
0.01
0.03
0.03Ga, 0.03V+Ti4
0.01
99.85
0.10
0.05
0.30~0.50
0.05
0.15
Remaining
0.05
0.15
Remaining
0.01
0.01
0.05
0.12
0.02
0.01
0.02
0.20
0.20
5.5~6.5
0.10
0.50
2004
0.01
0.03
0.02
30
99.70
99.85
0.083
1385
0.10
0.02
29
0.02
0.01
0.02
0.083
99.60
0.01
1285
0.02
0.02
28
0.03
0.03Ga, O.05V
0.02
0.15Si+Fe
99.50
0.03
005~0.10
1185
0.02
0.12
27
0.03
0.03Ga, 0.03V
0.01
0.08
0.10~0.20
0.03
0.02
1275
0.07
0.01
26
99.50
0.03Ga,0.02B,0.02V+Ti
0.02
0.10
0.10
0.04
0.25
1370
0.03
25
0.03
0.03
0.40Si+Fe
0.05V
0.01
1260
0.05
0.05
0.05
0.04
24
Al
Total
31
2011
0.40
0.7
50~60
0.30
32
2014
0.50~1.2
0.7
3.9~5.0
0.40~1.2
0.20~0.8
0.10
0.25
33
2014A
0.50~0.9
0.50
3.9~5.0
0.40~1.2
0.20~0.8
0.10
0.10
0.25
34
2214
0.50~1.2
0.30
3.9~5.0
0.40~1.2
0.20~0.8
0.10
35
2017
0.20~0.8
0.7
3.5~4.5
0.40~1.0
0.40~0.8
0.10
0.15
0.05
0.15
Remaining
0.15
0.20Zr+Ti
0.05
0.15
Remaining
0.25
0.15
0.05
0.15
Remaining
0.25
0.15
0.05
0.15
Remaining
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Others
Zr
Single
36
2017A
0.20~0.8
0.7
3.5~4.5
0.40~1.0
0.40~1.0
0.10
0.25
0.25Zr+Ti 0.05
Al
Total
0.15
Remaining
0.05
0.15
Remaining
0.05
0.15
Remaining
0.10
0.04~0.10
0.05
0.15
Remaining
0.8~1.4
0.15
0.20
0.25Zr+Ti 0.05
0.15
Remaining
0.10
0.05~0.15V
0.02~0.10
0.10~0.25
0.05
0.15
Remaining
0.10
0.05~015V
0.02~0.10
0.10~0.25
0.05
0.15
Remaining
0.25
0.15
0.05
0.15
Remaining
0.25
0.15
0.05
0.15
Remaining
0.05
0.15
Remaining
0.05
0.15
Remaining
37
2117
0.8
0.7
2.2~3.0
0.20
0.20~0.50
0.10
0.25
38
2218
0.9
1.0
3.5~4.5
0.20
12~1.8
0.10
1.7~2.3
0.25
39
2618
0.10~0.25
0.9~1.3
1.9~2.7
1,3~1.8
0.9~1.2
40
2618A
0.15~0.25
0.9~1.4
1.8~27
0.25
1.2~1.8
41
2219
0.20
0.30
58~6.8
0.20~0.40
0.02
2519
5.3~6.4
0.10~0.50 0.05~0.40
42
0.25
0.30
43
2024
0.50
0.50
3.8~4.9
0.30~0.9
1.2~1.8
0.10
44
2024A
0.15
0.20
3.7~4.5
0.15~0.8
1.2~1.5
0.10
45
2124
0.20
0.30
3.8~4.9
0.30~0.9
1.2~1.8
0.10
0.25
0.15
46
2324
0.10
0.12
3.8~4.4
0.30~0.9
1.2~1.8
0.10
0.25
0.15
Ti
Zr
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Others
Al
Single Total
0.05
0.15
0.10
0.05
0.15
Remaining
0.05
0.05V
0.03
0.03
0.10
Remaining
0.30
0.10
0.05
0.15
Remaining
1.0~1.5
0.10
0.05
0.15
Remaining
0.10
0.9~1.5
0.30
0.10
0.10Zr+Ti 0.05
0.15
Remaining
0.7
0,10
0.7~1.4
0.30
0.10
0.20
0.10
0.10Zr+Ti 0.05
0.15
Remaining
0.6
0.7
0.05
10~1.5
0.10
Remaining
0.7
0.25
1.0~1.5
0.8~1.3
0.25
0.15
0.30
0.05
3004
0.05
0.15
Remaining
55
3004A
0.40
0.7
0.25
0.8~1.5
0.8~1.5
0.10
0.25
0.03Pb
0.05
0.05
0.15
Remaining
56
3104
0.6
0.8
0.05~0.25
0.8~1.4
0.8~1.3
0.25
0.05Ga. 0.05V
0.10
0.05
0.15
Remaining
57
3204
0.30
0.7
0.10~0.25
0.8~1.5
0.8~1.5
0.25
0.05
0.15
Remaining
47
2524
0.06
0.12
4.0~4.5
48
3002
0.08
0.10
0.15
0.05~0.25 0.05~0.20
49
3102
0.40
0.7
0.10
0.05~0.40
50
3003
0.6
0.7
0.05~0.20
51
3103
0.50
0.7
52
3103A
0.50
53
3203
54
0.45~0.7
1.2~1.6
0.20
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Others
Zr
Al
Single Total
58
3005
0.6
0.7
0.30
1.0~1.5
0.20~0.6
0.10
59
3105
0.6
0.7
0.30
0.30~0.8
0.20~0.8
0.20
60
3105A
0.6
0.7
0.30
0.30~0.8
0.20~0.8
0.20
61
3006
0.50
0.7
0.10~0.30
0.50~0.8
0.30~0.6
0.20
62
3007
0.50
0.7
0.05~0.30
0.30~0.8
0.6
0.20
63
3107
0.6
0.7
0.05~0.15
0.40~0.9
64
3207
0.30
0.45
0.10
0.40~0.8
0.10
65
3207A
0.35
0.6
0.25
0.30~0.8
0.40
0.20
66
3307
0.6
0.8
0.30
0.50~0.9
0.30
0.20
67
4004
90~10.5
0.8
0.25
0.10
1.0~2.0
68
4032
11.0~13.5
1.0
0.50~1.3
0.8~1.3
0.10
0.25
0.10
0.05
0.15
Remaining
0.40
0.10
0.05
0.15
Remaining
0.25
0.10
0.05
0.15
Remaining
0.10
0.05
0.15
Remaining
0.AO
0.10
0.05
0.15
Remaining
0.20
0.10
0.05
0.15
Remaining
0.10
0.05
0.10
Remaining
0.2
0.05
0.15
Remaining
0.0
0.05
0.15
Remaining
0.20
0.05
0.15
Remaining
0.50~1.3
0.25
0.05
0.15
Remaining
0.15~0.40
0.10
69
Designtion
4043
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
4.5~6.0
0.8
0.30.
0.05
0.05
0.10
Ti
Zr
0.20
Others
Al
Single
Total
0.05
0.15
Remaining
0.15
0.05
0.15
Remaining
70
4043A
4.5~6.0
0.6
0.30
0.15
0.20
0.10
71
4343
6.8~8.2
0.8
0.25
0.10
0.20
0.05
0.15
Remaining
72
4045
9.0~11.0
0.8
0.30
0.05
0.05
0.10
0.20
0.05
0.15
Remaining
73
4047
11.0~13.0
0.8
0.30
0.15
0.10
0.20
0.05
0.15
Remaining
74
4047A
11.0~13.0
0.6
0.30
0.15
0.10
0.20
0.15
0.05
0.15
Remaining
75
5005
0.30
0.7
0.20
0.20
0.50~1.1
0.10
0.25
0.05
0.15
Remaining
76
5005A
0.30
0.45
0.05
0.15
0.7~1.1
0.10
0.20
0.05
0.15
Remaining
77
5205
0.15
0.7
0.03~0,10
0.10
0.6~1.0
0.10
0.05
0.05
0.15
Remaining
78
5006
0.40
0.8
0.10
0.40~0.8
0.8~1.3
0.10
0.25
0.10
0.05
0.15
Remaining
79
5010
0.40
0.7
0.25
0.10~0.30
0,20~0.6
0.15
0.30
0.10
0.05
0.15
Remaining
80
5019
0.40
0.50
0.10
0.10~0.6
4.5~5.6
0.20
0.20
0.10~0.6Mn+Cr
0.20
0.05
0.15
Remaining
81
5049
0.40
0.50
0.10
0.50~1.1
1.6~2.5
0.30
0.20
0.10
0.05
0.15
Remaining
82
5050
0.40
0.7
0.20
0.10
1.1~1.8
0.10
0.25
0.05
0.15
Remaining
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Zr
Others
Single Total
Al
83
5050A
0.40
0.7
0.20
0.30
1.1~1.8
0.10
0.25
0.05
0.15
Remaining
84
5150
0.08
0.10
0.10
0.03
1.3~1.7
0.10
0.06
0.03
0.10
Remaining
85
5250
0.08
0.10
0.10
0.04~0.15 1.3~1.8
0.05
0.03Ga,0.05V
0.03
0.10
Remaining
86
5051
0.40
0.7
0.25
1.7~2.2
0.10
0.25
0.10
0.05
0.15
Remaining
87
5251
0.40
0.50
0.15
0.10~0.50 1.7~2.4
0.15
0.15
0.15
0.05
0.15
Remaining
88
5052
0.25
0.40
0.10
0.]0
2.2~2.8
0.15~0.35
0.10
0.05
0.15
Remaining
89
5154
0.25
0.40
0.10
0.10
3.1~3.9
0.15~0.35
0.20
0.20
0.05
0.15
Remaining
90
5154A
0.50
0.50
0.10
0.50
3.1~3.9
91
5454
0.25
0,40
0.10
92
5554
0.25
0.40
0.10
93
5754
0.40
0.40
0.10
0.20
0.50~1.0 2.4~3.0
0.50~1.0 2.4~3.0
0.50
2.6~3.6
0.20
0.10~0.50MnH-Cr1
0.20
0.05
0.15
Remaining
0.05~0.20
0.25
0.20
0.05
0.15
Remaining
0.25
0.05~0.20
0.05
0.15
Remaining
0.20
0.10~0.6Mn+Cr
0.15
0.05
0.15
Remaining
0.25
0.05~0.20
0.30
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Others
Zr
Al
Single Total
0.05
0.15
Remaining
0.06~0.20
0.05
0.15
Remaining
0.20
0.05
0.15
Remaining
0.40~0.9
0.20
0.05~0.25
0.05
0.15
Remaining
0.25
0.10
0.05
0.15
Remaining
0.10
0.25
0.10
0.05
0.15
Remaining
0.40~1.0 4.0~4.9
0.05~0.25
0.25
0.15
0.05
0.15
Remaining
0.10
0.50~1.0 4.3~5.2
0.05~0.25
0.25
0.15
0.05
0.15
Remaining
0.25
0.20
0.7~1.0
0.25
0.40
0.15
0.20
0.05
0.15
Remaining
0.40
0.50
0.10
0.20~0.7 3.5~4.5
0.05~0.25
0.25
0.15
0.05
0.15
Remaining
0.30~07
0.50
0.10
0.03
0.10
0.06B
0.03
0.10
Remaining
94
5056
0.30
0.40
0.10
0.05~0.20 4.5~5.6
0.05~0.20
95
5356
0.25
0.40
0.10
0.05~0.20 4.5~5.5
0.05~0.20
0.10
96
5456
0.25
0.40
0.10
0.50~1.0 4.7~5.5
0.05~0.20
0.25
97
5059
0.45
0.50
0.25
0.6~1.2
5.0~6.0
0.25
98
5082
0.20
0.35
0.15
0.15
4.0~5.0
0.15
99
5182
0.20
0.35
0.15
0.20~0.50 4.0~5.0
100
5083
0.40
0.40
0.10
101
5183
0.40
0.40
102
5383
0.25
103
5086
104
6101
0.03
4.0~5.2
0.35~0.8
0..10
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Others
Zr
Al
Single Total
0.10
0.6~0.9
0.03
0.10
0.06B
0.40~0.7
0.10
0.10
105
6101A
0.30~0.7
0.40
0.05
0.40~0.9
106
6101B
0.30~0.6
0.10~0.30
0.05
0.05
0.35~0.6
107
6201
0.50~0.9
0.50
0.10
0.03
108
6005
0.6~0.9
0.35
0.10
0.10
0.03
0.10
Remaining
0.03
0.10
Remaining
0.03
0.10
Remaining
0.10
0.05
0.15
Remaining
0.20
0.12~0.50Mn+Cr
0.10
0.05
0.15
Remaining
0.10
0.10
0.05
0.15
Remaining
0.10
0.05
0.10
Remaining
0.10
0.25
0.10
0.05
0.15
Remaining
0.6~1.0
0.10
0.25
0.10
0.05
0.15
Remaining
0.10~0.45
0.50~1.0
0.10
0.15
0.10
0.05
0.15
Remaining
0.20
0.25~0.6
0.10
0.20
0.15
0.05
0.15
Remaining
109
6005A
0.50~0.9
0.35
0.30
0.50
0.40~0.7
0.30
110
6105
0.6~1.0
0.35
0.10
0.15
0.45~0.8
0.10
111
6106
0.30~0.6
0.35
0.25
0.05~0.2
0.40~0.8
0.20
112
6009
0.6~1.0
0.50
0.15~0.6
0.20~0.8
0.8
113
6010
0.8~1.2
0.50
0.15~0.6
0.20~0.8
114
6111
0.6~1.1
0.40
0.50~0.9
115
6016
1.0~1.5
0.50
0.20
116
Designtion
6043
Si
0.40~0.9
Fe
0.50
Cu
0.30~0.9
Mn
0.35
Mg
0.6~1.2
Cr
0.15
Ni
Zn
0.20
Ti
0.40~0.7Bi
Others
Zr
Single
Total
Al
0.15
0.05
0.15
Remaining
0.20
0.05
0.15
Remaining
0.05
0.15
Remaining
0.05
0.15
Remaining
0.05
0.15
Remaining
0.05
0.15
Remaining
0.05
0.15
Remaining
0.05
0.15
Remaining
0.20~0.40Sn
117
6351
0.7~13
0.50
0.10
118
6060
0.30~0.6
0.10~0.30
0.10
0.10
0.35~0.6
0.05
0.15
119
6061
0.40~0.8
0.7
0.15~0.40
0.15
0.8~1.2
0.04~0.35
0.25
0.15
0.25
0.15
0.25
0.15
0.10
0.10
0.15
0.10
0.05
0.05
0.15
Remaining
0.05
0.05
0.15
Remaining
120
6061A
0.40~0.8
0.7
0.15~0.40
0.40~0.8 0.40~0.8
0.15
0.8~1.2
0.20
0.04~0.35
121
6262
0.40~0.8
0.7
0.15~0.40
0.15
0.8~1.2
0.04~0.14
122
6063
0.20~0.6
0.35
0.10
0.10
0.45~0.9
0.10
123
6063A
0.30~0.6
0.15~0.35
0.10
0.15
0.6~0.9
0.05
124
6463
0.20~0.6
0.15
0.20
0.05
0.45~0.9
125
6463A
0.20~0.6
0.15
0.25
0.05
0.30~0.9
0.10
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Others
Zr
Al
Single Total
0.10
0.25
0.15
0.05
0.15
Remaining
0.6~1.0
0.10
0.20
0.10
0.05
0.15
Remaining
0.6~1.0
0.]5
0.30
0.10V
0.25
0.05
0.15
Remaining
0.10
0.40~1.0 0.6~1.2
0.25
0.20
0.10
0.05
0.15
Remaining
0.50
0.10
0.40~1.0
0.6~1.2
0.25
0.20
0.10
0.05
0.15
Remaining
0.35
0.40
1.6~2.6
0.20
2.6~3.4
0.18~0.35
6.8~8.0
0.20
0.05
0.15
Remaining
7003
0.30
0.35
0.20
0.30
0.50~1.0
0.20
5.0~6.5
0.20
0.05~0.25
0.05
0.15
Remaining
133
7004
0.25
0.35
0.05
0.20~0.7 10~2.0
0.05
3.8~4.6
0.05
0.10~0.20
0.05
0.15
Remaining
134
7005
0.35
0,40
0.10
0.20~0.7 1.0~1.8
0.06~0.20
4.0~5.0
0.01~0.06
0.08~0.20
0.05
0.15
Remaining
0.10~0.35
0.05
0.15
Remaining
126
6070
1.0~1.7
0.50
0.15~0.40
127
6181
0.8~1.2
0.45
0.10
0.15
128
6181A
0.7~1.1
0.15~0.50
0.25
0.40
129
6082
0.7 ~1.3
0.50
130
6082A
0.7~1.3
131
7001
132
135
7020
0.35
0.40
0.20
0.40~1.0 0.50~1.2
0.05~0.50 1.0~1.4
4.0~5.0
10
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Zr
Others
Single
Al
Total
136
7021
0.25
0.40
0.25
0.10
1.2~1.8
0.05
5.0~6.0
0.10
0.08-0.18
0.05
0.15
Remaining
137
7022
0.50
0.50
0.50~1.0
0.10~0.40
2.6~3.7
0.10~0.30
4.3~5.2
0.20Ti+Zr
0.05
0.15
Remaining
138
7039
0.30
0.40
0.10
0.10~0.40
2.3~3.3
0.15~0.25
3.5~4.5
0.10
0.05
0.15
Remaining
139
7049
0.25
0.35
1.2~1.9
0.20
2.0~2.9
0.10~0.22
7.2~8.2
0.10
0.05
0.15
Remaining
HO
7049A
0.40
0.50
1.2~1.9
0.50
2.1~3.1
0.05~0.25
7.2~8.4
0.25Zr+Ti
0.05
0.15
Remaining
141
7050
0.12
0.15
2.0~2.6
0.10
1.9~2.6
0.04
5.7~6.7
0.06
0.08~0.15
0.05
0.15
Remaining
142
7150
0.12
0.15
0.10
2.0~2.7
0.04
5.9~6.9
0.06
0.08~0.15
0.05
0.15
Remaining
1.9~2.5
143
7055
144
70722
145
7075
0.10
0.15
0.7Si+Fe
0.40
0.50
2.0~2.6
0.05
1.8~2.3
0.04
7.6~8.4
0.06
0.08~0.25
0.05
0.15
Remaining
0.10
0.10
0.10
0.8~1.3
0.05
0.15
Remaining
1.2~2.0
0.30
2.1~2.9
0.18~0.28
5.1~6.1
11'
0.20
0.05
0.15
Remaining
Ti
Zr
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Others
Al
Single Total
0.05
0.15
Remaining
0.06
0,05
0.15
Remaining
0.06
0.08~0.15
0.05
0.15
Remaining
0.05
0.05
0.15
Remaining
0.10
0.05
0.15
Remaining
0.10
0.03
146
7175
0.15
0.20
1.2~2.0
0.10
2.1~2.9
0.18~0.28
5.1~6.1
147
7475
0.10
0.12
1.2~1.9
0.06
1.9~2.6
0.18~0.25
5.2~6.2
148
7085
0.06
0.08
1.3~2.0
0.04
1.2~1.8
0.04
7.0~8.0
149
8001
0.17
0.45~0.7
0.15
0.9~1.3
150
8006
0.40
1.2~2.0
0.30
0.30~1.0
0.10
151
8011
0.50~0.9
0.10
0.20
0.05
0.05
152
8011A
0.40~0.8
0.50~1.0
0.10
0.10
0.10
0.10
153
8014
0.30
1.2~1.6
0.20
0.20~0.6
0.10
154
8021
0.15
1.2~1.7
0.05
155
8021B
0.40
1.1~1.7
0.05
0.03
0.6~1.0
0.01
0.10
0.10
0.08
0.05
0.15
Remaining
0.10
0.05
0.05
0.15
Remaining
0.10
0.05
0.15
Remaining
0.05
0.15
Remaining
0.05
0.05
0.03
0.10
Remaining
Ti
Zr
Si
156
8050
0.15~0.30
157
8150
0.30
Fe
1.1~1.2
0.9~1.3
Cu
Mn
Mg
Cr
Ni
Zn
Others
Single
Total
Al
0.05
0.45~0.55
0.05
0.05
0.10
0.05
0.15
Remaining
0.20~0.7
0.05
0.05
0.15
Remaining
158
8079
0.05~0.30
159
8090
0.20
0.7~1.3
0.30
(Si+Fe)0.14%.
(B)0.02%.
0.05
1.0~1.6
0.10
0.6~1.3
0.10
0.10
0.25
the maximal value of (Zr+Ti) of extrusion product and forging, negotiated and agreed by the parties may be 0.20%.
(Si+Fe)<0.40%.
CPb0.003%.
(Bi):0.40%~0.7%, (Pb):0.40%~0.7%.
10
(2r):0.08%~0.20, (Zr+Ti):0.08%~0,25%.
11
the maximal value of (Zr+Ti) of extrusion product and forging, negotiated and agreed by the parties may be 0.25%.
12
13
(Li): 2.2%~2.7%.
0.05
0.15
Remaining
0.10
0.04~0.16
0.05
0.15
Remaining
Table 2
Chemical composition (mass fraction) /%
No.
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Others
Zr
Single
1
1A99
0.003
0.003
0.005
0.001
1B99
0,0013
0.0015
0.0030
0.001
1C99
0.0010
0.0010
0.0015
0.001
1A97
0.015
0.015
0.005
1B97
0.015
0.030
0.005
1A95
0.030
0.030
0.010
1B95
0.030
0.040
0.010
1A93
0.040
0.040
0.010
1B93
0.040
0.050
0.010
10
1A90
0.060
0.060
11
1B90
0.060
12
1A85
13
Remarks
Total
0.002
0.002
99.99
LG5
0.001
0.001
99.993
0.001
0.001
99.995
0.001
0.002
0.005
99.97
LG4
0.001
0.005
0.005
99.97
0.003
0.008
99.95
0.003
0.008
0.005
0.005
99.95
0.005
0.010
0.007
99.93
LG3
0.005
0.007
99.93
0.010
0.008
0.015
0.01
99.90
LG2
0.060
0.010
0.008
0.010
0.01
99.90
0.08
0.10
0.01
0.01
0.01
0.01
99.85
LG1
1A80
0.15
0.15
0.03
0.02
0.02
0.03
0.03Ga, 0.05V
0.03
0.02
99.80
14
1A80A
0.15
0.15
0.03
0.02
0.02
0.06
0.03Ga
0.02
0.02
99.80
15
1A60
0.11
0.25
0.01
0.02V+Ti+Mn+Cr
0.03
99.60
16
1A50
0.30
0.30
0.01
0.05
0.05
0.03
0.45Fe+Si
0.03
99.50
LB2
17
1R50
0.11
0.25
0.01
0.03~0.30RE
0.02V+Ti+Mn+Cr
0.03
99.50
18
1R35
0.25
0.35
0.05
0.10~0.25RE, 0.05V
0.03
0.03
99.35
No.
Designtion
0.03
0.03
0.05
Al
0.010
Remarks
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Others
Zr
Single
19
130
0.10~0.20
0.15~0.30
0.05
0.01
0.01
0.01
0.02
0.02
20
130
0.05~0.15
0.20~0.30
0.03
0.12~0.18
0.03
0.03
0.02~0.05
21
201
0.50
0.50
2.2~3.0
0.20
0.20~0.50
0.10
22
202
0.30
0.30
2.6~3.2
0.45~0.7
2.0~2.4
0.10
0.001~0.01Be
0.10
99.30
L4-1
0.03
99.30
0.05
0.10
Remaining
LY1
0.05
0.10
Remaining
LY2
0.-.40
0.05
0.10
Remaining
LY4
0.001~0.005Be1
0.030.15
0.05
0.10
Remaining
LY6
0.10
0.0002~0.005Be
0.10
0.05
0.10
Remaining
0.15
0.05
0.10
Remaining
LY10
0.05
0.10
Remaining
LY11
0.05
0.10
Remaining
LY8
0.05
0.10
Remaining
LY12
0.10
0.15
0.15
204
0.30
0.30
3.2~3.7
0.50~0.8
2.1~2.6
24
206
0.50
0.50
3.8~4.3
0.50~1.0
1.7~2.3
25
206
0.20
0.30
3.8~4.3
0.40~0.9
1.7~2.3
26
210
0.25
0.20
3.9~4.5
0.30~0.50
0.15~0.30
0.10
27
2All
0.7
0,7
3.8~4.8
0.40~0.8
0.40~0.8
0.10
0.30
0.7Fe+Ni
0.15
28
0.50
0.50
3.8~4.5
0.40~0.8
040~0.8
0.10
0.15
29
2A12
0.50
0.50
3.8~4.9
0.30~0.9
1.2~1.8
0.10
0.30
0.50Fe+Ni
0.15
Designtion
0.03
23
No.
Al
Total
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Remarks
Ti
Others
Zr
Al
Single Total
30
2B12
0.50
0.50
3.8~4.5
0.300.7
1.1 ~1.6
31
2D12
0.20
0.30
3.8~4.9
0.30~0.9
1.2~1.8
32
2E12
0.06
0.12
U~1.8
33
2A13
0.7
0.6
0.30~0.50
34
2A14
0.6~1.2
0.7
3.9~4.8
0.40~1.0
0.40~0.8
35
2A16
0.30
0.30
6.0~7.0
0.40~0.8
0.05
36
2B16
0.25
0.30
5.8~6.8
0.20~0.40
0.05
4.0~4.6
0.40~0.7
4.0~5.0
0.10
0.15
0.05
0.10
Remaining
LY9
0.10
0.05
0.10
0.05
0.10
Remaining
0.15
0.0002~0.005Be
0.10
0.10
0.15
Remaining
0.6
0.05
0.10
Remaining
LY13
0.10
0.30
0.15
0.05
0.10
Remaining
LD10
0.10
0.15
0.10~0.20
0.20
0.05
0.10
Remaining
LY16
0.10~0.25 0.05
0.10
Remaining LY16-1
0.05~0.15V
0.08~0.20
37
2A17
0.30
0.30
6.0~7.0
0,40~0.8
0.25~0.45
0.10
38
2A20
0.20
0.30
5.8~6.8
0.02
0.10
0.05~0.15V
0.001~0.01B
0.10~0.20
0.07~0.16
39
2A21
0.20
0.20~0.6
30 ~4.0
0.05
0.8 ~1.2
1.8~2.3
0.20
0.05
40
2A23
0.05
0.06
1.8~2.8
0.20~0.6
0.6~1.2
0.15
0.30~0.9Li
0.15
0.05
0.10
Remaining
LY17
0.10~0.25 0.05
0.15
Remaining
LY20
0.05
0.15
Remaining
0.06~0.16 0.10
0.15
Remaining
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Others
Zr
Al
Remarks
Single Total
0.10
0.25
0.06
1.2~1.8
0.30~0.8
0.30~0.8
4.5~5.2
0.40~0.6
0.50~1.0
0.10~0.20
0.8~1.2
3.2~3.8
0.30~0.6
1,8~2.2
0.7~1.2
0.7
1.8~2.6
0.40~0.8
0.40~0.8
2B50
0.7~1.2
0.7
1.8~2.6
0.40~0.8
0.40~0.8
0.01~0.20
49
2A70
0.35
0.9~1.5
1.9~2.5
0.20
1.4~1.8
50
2B70
0.25
0.9~1.4
18~2,7
0.20
1.2~1.8
51
2D70
0.10~0.25
0.9~1.4
2.0~2.6
0.10
1.2~1.8
0.10
41
2A24
0.20
0.30
3.8~4,8
0.6~0.9
1.2~1.8
42
2A25
0.06
0.06
3.6~4.2
0.50~0.7
10~1.5
43
2B25
0.05
0.15
3.1~4.0
0.20~0.8
44
2A39
0.05
0.06
3.4~5.0
45
2A40
0.25
0.35
46
2A49
0.25
47
2A50
48
No.
Designtion
0.20Ti+Zr
0.15
0.10
0.0003~0.0008Be
0.03~0.07
0.30
0.30~0.6Ag
0.15
0.04~0.12
0.8~1.2
0.08~0.12
0.10
0.30
0.7Fe+Ni
0.15
0.10
0.30
0.7Fe+Ni
0.02~0.10
0.9~1.5
0.30
0.020.10
0.8~1.4
0.15
0.05Pb, 0.05Sn
0.10
0.9~1.4
0.10
0.05~0.10
Remaining
0.05
0.10
Remaining
0.08~0.25
0.05
0.10
Remaining
0.10~0.25
0.10
0.15
Remaining
0.10~0.25 0.05
0.15
Remaining
0.05
0.15
Remaining
0.05
0.10
Remaining
LD5
0.05
0.10
Remaining
LD6
0.05
0.10
Remaining
LD7
0.20Ti+Zr 0.05
0.15
Remaining
0.10
Remaining
0.05
Fe
Cu
Mn
Mg
Cr
Ni
Zn
0.15
0.08~0.12 0.05
Remarks
Ti
Zr
Others
Al
Single Total
52
2A80
0.50~1.2
1.0~1.6
1.9~2.5
0.20
1.4~1.8
0.9~1.5
0.30
0.15
0.05
0.10
Remaining
LD8
53
2A90
0.50~1.0
0.50~1.0
3.5~4.5
0.20
0.40~0.8
1.8~2.3
0.30
0.15
0.05
0.10
Remaining
LD9
54
2A97
0.15
0.15
2.0~3.2
0.20~0.6
0.25~0.50
0.17~1.0
008~0.20 0.05
0.15
Remaining
0.IO2
0.15
0.10Zn+Sn
0,50~1.3
0.25
0.05
1.2
1.0
0.20
0.20
1.2
0.30~0.7
6.0~7.0
0.10~0.20
0.25
0.15
2.0~2.8
0.6Si+Fe
0.15
Ti
Zr
3A21
0.6
0.7
0.20
1.0~1.6
0.05
56
4A01
4.5~6.0
0.6
0.20
57
4A11
11.5~13.5
1.0
0.50~1.3
0.20
0.8~1.3
0.10
58
4A13
6.8~8.2
0.50
0.15Cu+Zn
0.50
0.05
59
4A17
11.0~12.5
0.50
0.15Cu+Zn
0.50
60
4A91
1.0~4.0
0.7
0.7
61
5A01
0.10
62
5A02
0.40
0.40
0.10
0.001~0.10
0.8~2.3Li
55
0.40Si+Fe
0.001~0.10Be
Or
Cr0.15~0.40
0.05
0.10
Remaining
LF21
0.15
0.05
0.15
Remaining
LT1
0.15
0.05
0.15
Remaining
LD11
0.10Ca
0.15
0.05
0.15
Remaining
LT13
0.10Ca
0.15
0.05
0.15
Remaining
LT17
0.20
0.05
0.15
Remaining
0.10~0.20 0.05
0.15
Remaining
LF15
0.15
Remaining
LF2
0.05
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Others
Al
Remarks
Single Total
0.05
0.20
0.20
0.20
0.6Si+Fe
5.8~6.8
63
5B02
0.40
0.40
0.10
0.20~0.6
1.8~2.6
64
5A03
0.50~0.8
0.50
0.10
0.30~0.6
32~3.8
65
5A05
0.50
0.50
0.10
0.30~0.6
4.8~5.5
66
5B05
0.40
0.40
0.20
0.20~0,6
4.7~5.7
67
5A06
0.40
0.40
0.10
0.50~0.8
0.20
0.05
0.10
Remaining
0.05
0.10
Remaining
LF3
0.05
0.10
Remaining
LF5
0.15
0.05
0.10
Remaining
LF10
0.02~0.10
0.05
0.10
Remaining
LF6
0.05
0.10
Remaining
LF14
0.05
0.10
Remaining
LF12
0.10
0.15
0.0001~0.005Be
68
5B06
0.40
0.40
0.10
0.50~0.8
5.8~6.8
0.20
0.0001~0.005Be
69
5A12
0.30
0.30
0.05
0.40~0.8
8.3~9.6
0.10
0.20
0.005Be
0.10~0.30
0.-.15
0.0040.05Sb
70
71
72
73
No.
5A13
5A25
0.30
0.20
5A30
5A33
0.30
0.30
0.40Si+Fe
0.35
0.35
0.05
0.40~0.8
0.05~0.50 5.0~6.3
0.10
0.50~1.0
0.10
0.10
0.10
92~10.5
4.7~5.5
6.0~7.5
0.20
0.005Be
0.05~0.15
0.004~0.05Sb
0.0002~0.002Be
0.25
0.05~0.20Cr
Designtion
0.50~1.5
0.10
0.10~0.40Sc
0,0005~0.005Be
0.03~0.15
1
0.05~0.15
0.05
0.10
Remaining
LF13
0.06~0.20 0.10
0.15
Remaining
0.05
0.10
Remaining
LF16
0.10~0.30 0.05
0.10
Remaining
LF33
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Remarks
Ti
Others
Zr
Al
Single Total
74
5A41
0.40
0.40
0.10
0.30~0.6
6.0~7.0
0.20
0.02~0.10
0.05
0.10
Remaining
LT41
75
5A43
0.40
0.40
0.10
0.15~0.40 0.6~1.4
0.15
0.05
0.15
Remaining
LF43
76
5A56
0.15
0.20
0.10
0.30~0.40 5.5~6.5
0.10~0.20
0.10~0.18
0.05
0.15
Remaining
77
5A66
0.005
0.01
0.005
1.5~2.0
0.005
0.01
Remaining
LT66
78
5A70
0.15
0.25
0.05
0.30~0.7
5.5~6.3
0.05
0.15~0,40 5.5~6.5
0.05
0.05
79
80
81
82
83
5B70
5A71
5B71
5A90
6A01
0.10
0.20
0.20
0.15
0.40~0.9
0.20
0.30
0.30
0.20
0.35
0.05
0.05
0.10
0.05
0.35
0.30~0.7
5.8~6.8
0.10~0.20
0.30
5.8~6.8
0.30
4.5~6.0
0.50
0.40~0.8
0.50~1.0
0.15~0.30Se
0.0005~0.005Be
0.20~0.40Se
0.0005~0.005Be
0.20~0.35Se
0.0005~0.005Be
0.30
0.30
0.25
0.30~0.50Se
0.0005~0.005Be0.003B
0.005Na
0.02~0.05
0,05~0.15 0.05
0.15
Remaining
0.02~0.05
0.15
Remaining
0.05~0.15
0.08-0.15 0.05
0.15
Remaining
0.02~0.05
0.08~0.15 0.05
0.15
Remaining
0.10
0.08~0.15 0.05
0.15
Remaining
0.10
Remaining
6N01
1.9~2.3Li
0.50Mn+Cr
0.05
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Others
Zr
Single
84
6A02
0.50~1.2
0.50
0.20~0.6
Or
Cr0.15~0.35
0.450.9
0.20
0.15
0.15
0.01~0.04
0.10~0.20RE
0.10
0.20
0.02~0.10
0.25
0.15~0.35Sn
0.01~0.04
0.20~0.0
0.30~0.50Ag
0.04~0.12
0.9~1.3
0.45Si+Fe
85
6B02
0.7~1.1
0.40
0.10~0.40
0.10~0.30
0.40~0.8
86
6R05
0.40~0.9
0.30~0.50
0.15~0.25
0.10
0.20~0.6
0.10
87
6A10
0.7~1,1
0.50
0.30~0.8
0.30~0.9
0.7~1.1
0.05~0.25
88
6A51
0,50~0.7
0.50
0.15~0.35
0.45~0.6
89
6A60
0.7~1.1
0,30
0.6~0.8
0.50~0.7
0.7~1.0
90
7A01
0.30
0.30
0.01
91
7A03
0.20
0.20
1.8~2.4
0.10
1.2~1.6
0.05
92
7A04
0.50
0.50
1.4~2.0
0.20~0.6
1.8~2.8
0.10~0.25
93
7B04
0.10
0, 05~0.25
1.4~2.0
0,20~0.6
1.8~2.8
0,10~0.25
0.10
94
7C04
0.30
0.30
0.10~0.25
1.4~2.0
0.30~0.50
2.0~2.6
6.0~6,7
5.0~7.0
5.0~6.5
5.5~6.5
0.10
Remaining
LD2
0.05
0.10
Remaining
LD2-1
0.05
0.15
Remaining
0.04~0.20 0.05
0.15
Remaining
0.05
0.15
Remaining
0.10~0.20 0.05
0.15
Remaining
0.03
Remaining
LB1
0.05
0.10
Remaining
LC3
0.05
0.10
Remaining
LC4
0.05
0.10
Remaining
0.05
0.10
Remaining
Ti
Zr
0.05
Total
0.05
0.10
Remarks
0.02~0.08
Al
Designtion
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Others
Al
Remarks
Single Total
0.10
95
7D04
0.10
0.15
1.4~2.2
96
7A05
0.25
0.25
0.20
0.15~0.40 1.1~1 . 7
97
7B05
0.30
0.35
0.20
0.20~0.7
1.0~2.0
98
7A09
0.50
0.50
1.2~2.0
0.15
2.0~3.0
2.0~2.6
5.5~6.7
0.02~0.07Be
0.10
0.08~0.16 0.05
0.10
Remaining
0.05~0.15
4.4~5.0
0.02~0.06
0.10~0.25 0.05
0.15
Remaining
4.0~5.0
0.1 0 V
0.20
0.05
0.10
Remaining
7N01
0.16~0.30
5.1~6.1
0.10
0.05
0.10
Remaining
LC9
0.05
0.30
0.25
99
7A10
0.30
0.30
0.50~1.0
100
7A12
0.10
0.06~0.15
0.8~1.2
101
7A15
0.50
0.50
0.50~1.0
102
7A19
0.30
0.40
0.08~0.30
0.20~0.35 3.0~4.0
0.10
0.10~0.40 2.4~3.0
0.30~0.50 1.3~1.9
103
7A31
0.30
0.6
0.10~0.40
104
7A33
0.25
0.30
0.25~0.55
0.05
105
7B50
0.12
0.15
1.8~2.6
0.10
No.
1.6~2.2
0.10~0.20
3.2~4.2
0.10
6.3~7.2
0.0001~0.02Be
0.030.06
0.10~0.30
4.4~5.4
0.005~0.01Be
0.05
0.10~0.20
4.5~5.3
0.05~0.15
0.10
Remaining
LC10
0.10~0.18 0.05
0.10
Remaining
0.05
0.15
Remaining
LC15
0.08~0.20 0.05
0.15
Remaining
LC19
0.020.10
0.-0.25 0.05
0.15
Remaining
0.05
0.10
Remaining
0.08~0.16 0.10
0.15
Remaining
0.0001~0.004Be
3.6~4.5
0.0001~0.001Be
2.2~2.7
0.10~0.20
4.6~5.4
0.05
2.0~2.8
0.04
6.0~7.0
0.0002~0.002Be
0.10
0.05
0.10~0.20
0.20^0.40 2.5~3.3
Designtion
Remarks
Others
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Zr
Al
Single
Total
106
7A52
0.25
0.30
0.05~0.20
0.20~0.50
2.0~2.8
0.15~0.25
4.0~4.8
0.05~0.18
0.05~0.15
0.05
0.15
Remaining
LC52
107
7A55
0.10
0.10
1.8~2.5
0.05
1.8~2.8
0.04
7.5~8.5
0.01~0.05
0.08~0.20
0.10
0.15
Remaining
108
7A68
0.15
0.35
2.0~2.6
0.15~0.40
1.6~2.5
0.10~0.20
6.5~7.2
0.005Be
0.05~0.20
0.05-0.20
0.05
0.15
Remaining
109
7B68
0.05
0.05
2.0~2.6
0.05
1.8~2.8
0.04
7.8~9.0
0.01~0.05
0.08~0.25
0.10
0.15
Remaining
110
7D68
0.12
0.25
2.0~2.6
0.10
2.3~3.0
0.05
8.0~9.0
0.0002~0.002Be
0.03
0.10~0.20
0.05
0.10
Remaining
7A60
111
7A85
0.05
0.08
1.2~2.0
0.10
1.2~2.0
0.05
7.0~8.2
0.05
0.08~0.16
0.05
0.15
Remaining
112
7A88
0.50
0.75
1.0~2.0
0.20~0.6
1.5~2.8
0.05~0.20
0.20
4.5~6.0
0.10
0.10
0.20
Remaining
113
8A01
0.05~0.30
0.18~0.40
0.15~0.35
0.08~0.35
0.01~0.03
0,05
0.15
Remaining
114
8A06
0.55
0.50
0.10
0.10
0.10
0.10
1.0Si+Fe
0.05
0.15
Remaining
L6
The content of beryllium shall be added as required, and may not analyzed.
3A21 alloy of gage line, the zinc content is not larger than 0.03%.
Annex A (Informative)
Table of Comparison for Table 2 Involved Lettered Designations and Former
Designations
The comparison for Table 2 involved lettered and former designations is detailed as Table A.1
Table A.1: table of comparison for Table A.1 involved lettered and former designations
Table 2 invonled
Former
Former
Former
letterd designation
designation
designation
designation
designation
designation
1A99
LG5
2A21
214
5A66
LT66
1B99
2A23
5A70
1C99
2A24
5B70
1A97
LG4
2A25
225
5A71
1B97
2B25
1A95
2A39
5A90
1B95
2A40
6A01
6N01
1A93
LG3
2A49
149
6A02
LD2
1B93
2A50
LD5
6B02
LD2-1
1A90
LG2
2B50
LD6
6R05
1B90
2A70
LD7
6A10
1A85
LG1
2B70
LD7-1
6A51
651
1A80
2D70
6A60
2A80
LD8
7A01
LBl
LD9
7A03
LC3
7A04
LC4
1A80A
5B71
1A60
2A90
1A50
LB2
2A97
1R50
3A21
LF21
7B04
1R35
4A01
LT1
7C04
1A30
L4-1
4A11
LD11
7D04
1B30
4A13
LT13
7A05
705
2A01
LY1
4A17
LT17
7B05
7N01
2A02
LY2
4A91
491
7A09
LC9
2A04
LY4
5A01
2102, LF15
7A10
LCl0
2A06
LY6
5A02
LF2
7A12
2B06
5B02
7A15
LC15,157
2A10
LYl0
5A03
LF3
7A19
919.LC19
2A11
LY11
5A05
LF5
7A31
183-1
2B11
LY8
5B05
LFl0
7A33
LB733
2A12
LY12
5A06
LF6
7B50
2B12
LY9
5B06
LF14
7A52
LC52, 5210
2D12
512
LF12
755
212
513
LF13
768
213
LY13
525
768
214
LDl0
530
2103,LF16
7D68
760
216
LY16
533
LF33
785
216
LY16-1
541
LT41
788
217
LY17
543
LF43
801
220
LY20
556
806
L6
Annex B (Informative)
Comparison of Corresponding Chapters and Sections of this
Standard and ISO 209: 2007
The comparison of corresponding chapters and sections of this standard and ISO 209: 2007 is
detailed as Table B.1.
Table B.1: comparison of corresponding chapters and sections of this standard and ISO 209: 2007
Numbers of chapter or sections in this standard
Annex A