Professional Documents
Culture Documents
100FD SPC A 085113 A
100FD SPC A 085113 A
Specifications
SECTION 085113
Document No.
4561348-100FD-SPC-A-085113
PART 2 - PRODUCTS
2.1
MATERIALS, GENERAL
A.
B.
2.
C.
D.
Reinforcing Members:
Aluminum, nonmagnetic stainless steel,
nickel/chrome-plated steel complying with ASTM B 456 for Type SC 3
severe service conditions, or zinc-coated steel or iron complying with
ASTM B 633 for SC 3 severe service conditions; provide sufficient
strength to withstand design pressure indicated.
E.
F.
G.
H.
2.2
GLAZING
A.
B.
2.3
A.
2.4
A.
HARDWARE
General: Provide manufacturer's standard hardware fabricated from
aluminum, stainless steel, carbon steel complying with AAMA 907, or
other corrosion-resistant material compatible with aluminum; designed to
smoothly operate, tightly close, and securely lock aluminum windows
and sized to accommodate sash or ventilator weight and dimensions. Do
not use aluminum in frictional contact with other metals. Hardware shall
be as specified in AAMA/WDMA 101/I.S.2.
ACCESSORIES
Integral Ventilating System/Device: Where indicated, provide weatherstripped, adjustable, horizontal, fresh-air vent, with a free airflow slot for
C.
2.5
A.
FABRICATION
General: Fabricate aluminum windows, in sizes indicated, that comply
with AAMA/NWWDA 101/I.S.2 for performance class and performance
grade indicated. Include a complete system for assembling components
and anchoring windows.
1.
2.
3.
B.
C.
2.
3.
D.
2.
E.
F.
G.
H.
I.
J.
Glazing Stops:
Provide snap-on glazing stops coordinated with
Division 8 Section "Glazing" and glazing system indicated. Provide
glazing stops to match sash and ventilator frames.
2.6
FINISHES
A.
General:
Comply with NAAMM's "Metal Finishes Manual for
Architectural and Metal Products" for recommendations for applying and
designating finishes.
B.
C.
selected by Engineer
from