Professional Documents
Culture Documents
CLAA320WF01
CLAA320WF01
CLAA320WF01
CLAA320WF01
ACCEPTED BY
APPROVED BY
CHECKED BY
PREPARED BY
Product Planning
Management
General Division
Issue Date:
2007/08/23
CPT
RECORD OF REVISIONS
Revision No.
Date
new
2007/08/21
CPT Confidential
Page
Description
The first edition issued.
1/30
CLAA320WF01D-SPEC-20070823
CPT
CONTENTS
No
Item
Page
OVERVIEW
ELECTRICAL CHARACTERISTICS
10
INTERFACE TIMING
13
DATA MAPPING
18
MECHANICAL SPECIFICATION
19
OPTICAL CHARACTERISTICS
21
25
10
26
11
28
CPT Confidential
2/30
CLAA320WF01D-SPEC-20070823
CPT
1. OVERVIEW
CLAA320WF01 is 32 color (80.04 cm) TFT-LCD (Thin Film Transistor Liquid Crystal Display)
module composed of LCD panel, LVDS driver ICs, control circuit and backlight. By applying 8 bit
digital data, 1366*768, 16.7 million-color images are displayed on the 32 diagonal screen. Interface of
data and control signals is Typ. inverter for backlight is included in this module. General specification
are summarized in the following table:
ITEM
Display Area (mm)
Number of Pixels
Pixel Pitch (mm)
Color Pixel Arrangement
Display Mode
Number of Colors
Color Gamut
Color Temperature
Brightness
Viewing Angle
CR20
Wide View Tech.
Electrical Interface
Response Time (GTG)
Power Consumption
Module Size (mm)
Module Weight (g)
Backlight Unit
Surface Treatment
SPECIFICATION
697.6845(H)x392.256(V)
(31.51-inch diagonal)
1366 3(H) 768(V)
0.51075(H) 0.51075(V)
RGB vertical stripe
Normally black
16.7M
NTSC 75%
10000K
500 cd/m2
-85~85(H) , --85~85(V)
MVA
LVDS
8ms
(115W)
760.01(W) 450.01 (H) 45.01 (D)
(including inverter)
7500(Typ.)
CCFL, 14 tables
Hard coating, Anti-glare ,
Surface-hardness : 3H
< Reflection 4 % >
The LCD products listed on this document are not suitable for use of aerospace equipment, submarine
cables, and nuclear reactor control system and life support systems. If customers intend to use these
LCD products for above application or not listed in "Standard" as follows, please contact our sales
people in advance.
Standard : Computer, Office equipment, Communication equipment, Test and Measurement
equipment, Machine tool, Industrial robot, Audio and Visual equipment, Other consumer
products.
CPT Confidential
3/30
CLAA320WF01D-SPEC-20070823
CPT
SYMBOL
VCC
VBL
PDIM
ON/OFF
VESD
VESD
Top
Tstg
MIN.
-0.3
-0.3
-0.3
-0.3
-250
-15
0
-20
MAX.
12.6
27.0
3.5
5.5
250
15
50
60
UNIT
REMARK
V
V
Vdc
Vdc
V
KV
[Note]
*1) The relative temperature and humidity range are as below sketch, 90%RHMax. (Ta40)
*2) The maximum wet bulb temperature 39(Ta40) and without dewing.
*3) If you use the product in a environment which over the definition of temperature and humidity
too long to effect the result of eye-atching.
*4) If you operate the product in normal temperature range, the center surface of panel should be
under 60.
Humidity
Humidity85%RH without condensation.
Relative Humidity 90% (Ta 40)
Wet Bulb Temperature 39(Ta40)
90%
60
60%%
Wet Bulb
Temperature [C]
Storage
40
40%
30
20
10
10%
-20
10
Humidity [(%)RH]
50
20
30
40
50
60
70
80
CPT Confidential
4/30
CLAA320WF01D-SPEC-20070823
Operation
CPT
3. ELECTRICAL CHARACTERISTICS
(a). TFT-LCD
ITEM
SYMBOL
LCD Power Supply Voltage
VCC
Ripple Voltage
Vrpd
Rush Current
Irush
White
LCD Power
ICC
Black
Supply Current
RGB stripe
LCD Power Consumption
Pc
High Input Voltage of LVDS
VIN+
Low Input Voltage of LVDS
VINInput Common Voltage of LVDS
VCM
Input Terminal Resist of LVDS
RT
MIN
11.4
-------100
---
TYP
12.0
--350
300
320
(7)
--1.25
100
MAX
12.6
100
4
900
600
700
12
100
---
Ta=25
UNIT
REMARK
V
[Note 1]
mVp-p VCC=+12.0V
A
[Note 2]
mA
W
mV
mV
V
ohm
[Note 3]
[Note 4]
DC
+12V
FUSE
C3
1uF
LCD Module
Input
R1
47k
Q2
2SK1470
SW
(High to low)
(control signal)
R2
1k
C2
0.01uF
VR1
47k
+12V
DC
+15V
0.9Vcc
C1
1uF
0.1Vcc
1ms
GND
CPT Confidential
5/30
CLAA320WF01D-SPEC-20070823
CPT
b. Black pattern
CPT Confidential
6/30
CLAA320WF01D-SPEC-20070823
CPT
90%
Power Supply
(VCC12V)
10%
10%
T1
T4
T2
T3
Interface Signal
(LVDS Data with H,Vsync
and DENA)
DE)
T5
T6
BL on
Power Supply for
Backlight
Parameter
Unit
Min
Typ
Max
T1
---
30
ms
T2
---
50
ms
T3
---
50
ms
T4
2000
---
ms
T5
110
---
ms
T6
100
---
ms
VCC-dip state
1) When 9VVCC11.4 Vtd10 ms.
2) VCC 11.4VVCC-dip condition should also follow the VCC-turn-off condition.
9V
CPT Confidential
7/30
11.4V
CLAA320WF01D-SPEC-20070823
CPT
LT
50000
--
--
hr
*1)
Input Voltage
VIN
21.6
24
26.4
*2)
Input Current
IIN
--
4.5
(5.5)
*3)
FDIM
100
--
350
Hz
PDIM
2.0
--
3.3
High *4)
PDIM
--
0.8
Low *4)
Vsel
2.0
--
3.3
High
Vsel
--
0.8
Low
PDIM
--
3.3
*5)
OSC Frequency
FOSC
61.5
63.5
65.5
kHz
In-Rush Current
IBRS
--
PDIM
20
--
100
ON/OFF
Control Voltage
ON
OFF
Power Consumption
(Backlight )
ON/OFF
BLW
--
0.8
--
108
(132)
V
W
*3)
CPT Confidential
8/30
CLAA320WF01D-SPEC-20070823
CPT
CPT Confidential
9/30
CLAA320WF01D-SPEC-20070823
CPT
mode
DE
Sync
10/30
CLAA320WF01D-SPEC-20070823
CPT
TxOUT/RxIN0
TxOUT/RxIN1
TxOUT/RxIN2
TxOUT/RxIN3
CPT Confidential
LVDS pin
TxIN/RxOUT0
TxIN/RxOUT1
TxIN/RxOUT2
TxIN/RxOUT3
TxIN/RxOUT4
TxIN/RxOUT6
TxIN/RxOUT7
TxIN/RxOUT8
TxIN/RxOUT9
TxIN/RxOUT12
TxIN/RxOUT13
TxIN/RxOUT14
TxIN/RxOUT15
TxIN/RxOUT18
TxIN/RxOUT19
TxIN/RxOUT20
TxIN/RxOUT21
TxIN/RxOUT22
TxIN/RxOUT24
TxIN/RxOUT25
TxIN/RxOUT26
TxIN/RxOUT27
TxIN/RxOUT5
TxIN/RxOUT10
TxIN/RxOUT11
TxIN/RxOUT16
TxIN/RxOUT17
TxIN/RxOUT23
11/30
JEIDA-DATA
R2
R3
R4
R5
R6
R7
G2
G3
G4
G5
G6
G7
B2
B3
B4
B5
B6
B7
Non-JEIDA-DATA
Hsync
Vsync
R0
R1
R2
R3
R4
R5
G0
G1
G2
G3
G4
G5
B0
B1
B2
B3
B4
B5
Hsync
Vsync
DENA
R0
R1
G0
G1
B0
B1
Reserved
DENA
R6
R7
G6
G7
B6
B7
Reserved
CLAA320WF01D-SPEC-20070823
CPT
Symbol
Description
Default
VIN
24V
VIN
24V
VIN
24V
VIN
24V
VIN
24V
BLGND
GND
BLGND
GND
BLGND
GND
BLGND
GND
10
BLGND
GND
11
NC
NC
NC
12
ON/OFF
BL On : High (2.0~5.0)V
BL Off : NC/GND (0~0.8)V
On
13
PDIM(1)
PWM
-SEL
14
100%
High*2)
[Note]
(1) PDIM is PWM duty control Input for +3.3V TTL Level Signal. This Input Signal is Continuous
Pulse Signal with +3.3V, TTL Level Signal Spec. If this is NC or +3.3V, 100% Duty (i.e.
+3.3V, DC level), Back Light should perform 100% Luminance. Duty Ratio of this Input
signal should be proportional relationship in certain range of control without any kind of
inherent side effect like Waterfall effect on Screen. Guaranteed Duty Range and Dimming Ratio
should be specified with supplementary measurement result.
(2) 14th Pin is selection pin for PWM control method; if this pin is connected to GND, VDIM
th
input of 13 Pin should have Logic Level Duty Signal for PWM control. If this is set to High or
th
CPT Confidential
12/30
CLAA320WF01D-SPEC-20070823
CPT
5. INTERFACE TIMING
(1) Timing Specification
ITEM
SYMBOL
MIN.
TYP.
MAX.
UNIT
Freq.
fCLK
62
80
84
MHz
Cycle
tCLK
14.7
12.5
11.9
ns
Line Rate
fH
37.1
48.6
56
kHz
Horizontal
Total Time
tH
1575
1648
1936
tCLK
Horiaontal
Effective Time
tHA
1366
1366
1366
tCLK
Horizontal
Blank Time
tHB
209
282
570
tCLK
Frame Rate
Fr
47
60
63
Hz
Vertical
Total Time
tV
(796)
810
(870)
tH
Vertical
Effective Time
tVA
768
768
768
tH
Vertical
Blank Time
tVB
22
42
120
tH
Horizontal
Sync Time
tHsync
---
136
---
tCLK
Horizontal
Back Porch
tHBP
---
108
---
tCLK
Vertical
Sync Time
tVsync
---
---
tH
Vertical
Back Porch
tVBP
---
22
---
tH
Note
DCLK
Horizontal
DENA
Mode
LCD
Timing
Vertical
Horizontal
Sync
Mode
Vertical
CPT Confidential
13/30
CLAA320WF01D-SPEC-20070823
PAL:47~53Hz
NTSC:57~63Hz
CPT
First Data
DATA
(R,G,B)
Invalid Data
1365
1366
Invalid Data
Last Data
t HBP
t HFP
tHA
DENA
tH=1/fH
Hsync
thsync
thsync
HD
LINE DATA
Invalid Data
t VBP
767
t VA
768
Invalid Data
tVFP
DENA
tV=1/fV
Vsync
tvsync
CPT Confidential
tvsync
14/30
CLAA320WF01D-SPEC-20070823
CPT
1CLK
RXCLKIN
R1
R0
G0
R5
R4
R3
R2
RXIN1
G2
G1
B1
B0
G5
G4
G3
G2
G1
RXIN2
B3
B2
DENA
Vsync
Hsync
B5
B4
B3
B2
RXIN3
R7
R6
Reserved
B7
B6
G7
G6
R7
R6
PREVIOUS
R1
R0
RXIN0
b.JEIDA specification
8bit LSB:R0,G0,B0
Parallel TTL Data Inputs Mapped to LVDS Outputs
CPT Confidential
15/30
CLAA320WF01D-SPEC-20070823
NEXT
CPT
51
TA0
R2
52
TA1
R3
54
TA2
R4
55
TA3
56
TA4
TA5
R7 (MSB)
TA6
G2
TB0
G3
TB1
G4
11
TB2
G5
12
TB3
14
TB4
15
TB5
B2
19
TB6
B3
20
TC0
B4
22
TC1
B5
23
TC2
B6
24
TC3
27
TC4
28
TC5
Vsync
30
TC6
DENA
50
TD0
R0 (LSB)
TD1
R1
TD2
G0 (LSB)
10
TD3
16
TD4
18
TD5
B1
25
TD6
Reserved
CPT Confidential
HOST
TxOUT0+
TxOUT0-
TxOUT1+
TxOUT1-
TxOUT2+
TxOUT2-
TxOUT3+
TxOUT3-
16/30
TFT_LCD
PIN NO
RxIN0+
RxIN0-
RxIN1+
RxIN1-
RxIN2+
RxIN2-
RxIN3+
RxIN3-
R5
R6
G6
G7 (MSB)
B7 (MSB)
Hsync
G1
B0 (LSB)
CLAA320WF01D-SPEC-20070823
CPT
[Note]
(1) Definition of gray scale
Color (n)n indicates gray scale levelhigher n means brighter level.
(2)Data1-High0-Low
CPT Confidential
17/30
CLAA320WF01D-SPEC-20070823
CPT
6. BLOCK DIAGRAM
TFT-LCD Module
Timing
Controller
Source Driver
Vcc=12V
INPUT CONNECTOR
RxIN1 +/-
Voltage Supply
for Gray Levels
Gate Driver
RxIN0 +/-
LCD Panel
1366 X 3 X 768
DC/DC
GND
Backlight
Converter
BACKLIGHT UNIT
Lamp connector
HV CP0404S0000(CVILUX)*7 or compatible
Mating connectorCP042CP1MT0 (CVILUX) or compatible
HV
CPT Confidential
18/30
CLAA320WF01D-SPEC-20070823
CPT
7. MECHANICAL SPECIFICATION
(1) Front side ( include inverterif the sizes of a panel dont show the differential valueplease
follow the values show as differential range table. )
[Unit: mm]
CPT Confidential
19/30
CLAA320WF01D-SPEC-20070823
CPT
(2) Rear side ( include inverterif the sizes of a panel dont show the differential valueplease follow
the values show as differential range table. )
[Unit: mm]
CPT Confidential
20/30
CLAA320WF01D-SPEC-20070823
CPT
8.OPTICAL CHARACTERISTICS
Ta = 25C, VCC=12V
ITEM
Contrast (CEN)
Central
Luminance
Luminance 9P Luminance
(CEN)
(AVG)
Uniformity
Dimming 100%
esponse Time
( Gray to Gray Average )
Image Sticking
Horizontal
View Angle
Vertical
Crosstalk Ratio
SYMBO
CONDITION
L
= 0
CR
Point-5
= 0
= 0
= 0
= 0
= 0
= 0
trg , tfg
tis
CMR
MIN.
TYP.
MAX.
800
1000
--
380
500
--
*1)*2)*3)
cd/m2
*9)
500
--
cd/m2
*2)*3)
75
--
--
*2)*3)
= 0
--
(15)
ms
*4)
4h
CR 20
Point-5
= 0
--80~80
-80~80
--
--85~85
-85~85
--
(3)
--(1)
*5)
*2)*3)
*2)*3)
*3)*6)
--
*2)*3)
Red
Rx
Ry
(0.628)
(0.283)
(0.658)
(0.313)
(0.688)
(0.343)
Green
Gx
Gy
(0.255)
(0.575)
(0.285)
(0.605)
(0.315)
(0.635)
Blue
Bx
By
(0.113)
(0.050)
(0.143)
(0.080)
(0.173)
(0.110)
White
Wx
Wy
0.253
0.267
0.28
0.29
0.313
0.327
Color Temperature
Color Gamut
Tc
CG
Color
Temperature
Coordinate
UNIT Remarks
= 0
Point-5
-10000
-K
*3)
-75
-%
*7)
Definition of the ( . ) : The value is variation
[Note]
These items are measured usingBM-5A (TOPCON)
View AngleEZ contrast XL-88Response TimeWestar TRD-100
[ under the dark room condition (no ambient light). ]
Definition of these measurement items is as follows
*1) Definition of Contrast Ratio
CR=ON (White) Luminance/OFF (Black) Luminance
*2) Definition of Luminance and Luminance uniformity and Contrast and the Deviation of Color
Coordinate
CPT Confidential
21/30
CLAA320WF01D-SPEC-20070823
CPT
683
228
1138
(1, 1)
128
384
640
(1366, 768)
CPT Confidential
22/30
CLAA320WF01D-SPEC-20070823
CPT
90%
L u m in a n ce
(G ray S cale L evel)
(0~255 th )
trg
10%
10%
tfg
B la c k B a c k g r o u n d
30(0 G L )
3 0 -P ix e l
CPT Confidential
23/30
CLAA320WF01D-SPEC-20070823
CPT
(683,96)
(341,192)
(171,384)
Black
Pattern A
(1195,384)
(1024,576)
(683,672)
GRAY
Gray128
127
Pattern B2
(0,0)
Gray128
White
measurement point
(1366,768)
Figure 8-6. The pattern of cross talk test
*7) Definition of Color Gamut:
To measure RGB three sub-pixels color gamut coordinate at CIE coordinate chart from the center
of module , to form a triangle area = ARGB.
RGB three sub-pixels of NTSC at CIE coordinate chart to form a triangle area = NRGB.
CG =
ARGB
NRGB
100
CPT Confidential
24/30
CLAA320WF01D-SPEC-20070823
CPT
CONDITIONS
50240hrs
60240hrs
5090% RH240 hrs
(No condensation)
0240 hrs
-20240 hrs
Between -20(1hr) and 60(1hr)
50 Cycles
CONDITIONS
Shock level980m/s (100G)
Waveformhalf sinusoidal wave, 2ms
Number of shocksone shock input in each direction of three
mutually perpendicular axes for a total of six shock inputs.
Vibration level14.7m/s2(1.5G) zero to peak
Waveformsinusoidal
Frequency range10 to 300 Hz
Frequency sweep rate0.5 octave/min
Durationeach xyz axis10 mintotal 30 mins
2
Shock
(Non-Operation)
Vibration
(Non-Operation)
Module
Test statements
200 pF0 250 V
By using contact-mode to discharge each pin one time and then check the
module frame.
150pF33015KV
1.Under test conditions, by using air-mode to discharge each test point 25
times continuously and then check the module frame.
2. Under test conditions, by using contact-mode to discharge each test point
of panel frame 25 times continuously and then check the module frame.
25/30
CLAA320WF01D-SPEC-20070823
CPT
26/30
CLAA320WF01D-SPEC-20070823
CPT
CPT Confidential
27/30
CLAA320WF01D-SPEC-20070823
CPT
CPT Confidential
28/30
CLAA320WF01D-SPEC-20070823
CPT
0.3mmW0.6mm
L30mm
N6
SPOT
3.0mm5.0mm
N9
Note1
FIBER
POLARIZER
BUBBLE
TOTAL
W6.0mm, L10mm
N9
Note1
0.3mm0.6mm
N9
Note1
SCRATCH
VISUAL DEFECT
INTERNAL
ELECTRICAL
DEFECT
Note
LIMIT
N12
BRIGHT DOT
N4
Note2
DARK DOT
N12
TOTAL DOT
N12
Note2
6PAIRS
Note3
4PAIRS
Note3
3PAIRS
Note3
NOT ALLOWED
NOT ALLOWED
CPT Confidential
29/30
CLAA320WF01D-SPEC-20070823
CPT
*3) Judge defect dot and adjacent dot as following. Allow below (A and B status) adjacent dot, including
bright and dart adjacent dot. And they will be counted 2 defect dots in Allow above (as E, F and G
status) three adjacent defect dots, including bright and dart dot. And they will be counted 3 defect
dots in total quantity. Allow above (as H, I, J, K, L, M and N status) four adjacent defect dots,
including bright and dart dot. And they will be counted 4 defect dots in total quantity.
*4) Mura is defined through transmission 1% ND Filter under 50% gray scale pattern as following.
*5)Other
(1) The defects that are not defined above and considered to be problem shall be refered to CPT limited sample first. It will be
reviewed and discussed by both parties secondly.
(2) Defects on the Black Matrix, out of Display area, are not considered as a defect or counted.
CPT Confidential
30/30
CLAA320WF01D-SPEC-20070823
CPT
CPT Confidential
31/30
CLAA320WF01D-SPEC-20070823