Professional Documents
Culture Documents
Change Log
Change Log
Change Log
========================
380.57 (24-Dec-2015)
- NEW: Merged with 380_1031 GPL
- NEW: Added RT-AC3100 and RT-AC5300 support
- NEW: Added RT-AC68U HW Revision C1 support
- NEW: Backup/Restore of the content of the JFFS
partition (under Administration Restore/Save Settings)
- NEW: Added DNSSEC support. Can be enabled under LAN -> DHCP.
- NEW: Added custom/postconf support for igmpproxy.conf.
- CHANGED: Increased user account limit from 16 to 32 on
the VPN server pages.
- CHANGED: Updated e2fsprogs to 1.42.13
- CHANGED: Increased maximum entries in Parental Control
(time scheduler) to 32.
- CHANGED: Updated miniupnpd to 1.9.20151119.
- CHANGED: Updated Openssl to 1.0.2e.
- CHANGED: Downgraded Dropbear to 2014.66, too many issues in
the newer releases.
- CHANGED: Improvements to VPN Status page
- FIXED: CTF not automatically disabled when enabling IPTraffic.
- FIXED: Openvpn clients 3 through 5 were all run on the first
CPU core. They are now properly alternated like the
first two (odd on CPU1, even on CPU0)
- FIXED: smb.log generated by networkmap could fill up RAM
- FIXED: upnpc_xml.log generated by miniupnpc could fill up RAM
- FIXED: Inconsistant names used on IPTraffic and Sysinfo page.
Now, we give priority to any description manually entered
on the networkmap, followed by static hostname, then any
current (lease) hostname.
- FIXED: MAC queries sent to the OUI database were broken due to
changes on the IEEE website
- FIXED: Applying changes to OpenVPN client page would start the
client even if it was disabled/stopped.
378.56_2 (2-Nov-2015)
- CHANGED: Reverted the memory buffering optimization
for ARM devices, as people keep panicking
over the lower amount of free RAM. You can
manually re-enable the optimization by setting
"drop_caches=0" in nvram.
- CHANGED: Allow using a port < 1024 for http(s) webui
interface.
- FIXED: EMF wasn't working on AC56/AC68/AC87.
- FIXED: Couldn't connect to ISPs using VLANs (RT-AC87U)
- FIXED: Editing Port Forward entry with ellipsis in
the description or the port range would
still edit the shortened version instead
of the full content.
- FIXED: Debug log from mDNSNetMonitor could gradually
fill up RAM - disabled it.
- FIXED: Router crash if pasting SSH key > 2047
characters.
- FIXED: Editing an entry on the networkmap would
clear the hostname if entry existed in
the DHCP static list.
- FIXED: OpenVPN server in secret key mode
would fail to start.
NEW:
NEW:
NEW:
NEW:
378.55 (17-July-2015)
- FIXED: DHCP lease page could get confused by IPv6 clients on
the LAN.
378.55 Beta 2
- CHANGED:
- CHANGED:
- CHANGED:
-
(11-July-2015)
Updated dnsmasq to 2.73 RC9 (backport from GPL 6975)
Updated odhcp6c to newer version (backport from GPL 6975)
Updated openssl to 1.0.2d (fixes CVE-2015-1793, only present
in Beta 1 - 54_2 was not affected)
CHANGED: Display existing key/certs on the OpenVPN pages once
they've been migrated to JFFS.
FIXED: Time scheduler-related features (Parental Control & Wifi
scheduler) were broken (backported fix from Asus's GPL 6975)
(beta 1 regression)
FIXED: QTN firmware was still being copied to RAM rather than rely
on the symlink to flash added in Beta 1, to save 4 MB of RAM.
(AC87U)
FIXED: Dropbox cloud sync would fail on some setups (backport
from GPL 6975)
FIXED: Entware-setup script would generate an invalid services-start
script
FIXED: Duplicate zoneedit entry on the DDNS service list.
NEW:
NEW:
NEW:
NEW:
NEW:
378.54_2 (10-June-2015)
- FIXED: The exported opvn config for clients had the incorrect port
value.
- FIXED: Busybox's zcip was missing a patch from 378_4950, preventing
it from working (and in turn preventing igmpproxy from working
for people with PPPoE connections where their modem does not
provide any DHCP lease to the physical WAN interface)
378.54_1 (8-June-2015)
- Some of the builds were unstable, did a complete recompile of all
releases. There was no code change.
378.54 (7-June-2015)
IMPORTANT: if you were previously using the AiProtection ad blocker, you
will need to manually disable it over SSH after flashing this
release, by running the following commands:
nvram set wrs_adblock_popup=0
nvram set wrs_adblock_stream=0
nvram commit
- NEW: Merged with Asus GPL 378_5134.
- NEW: OpenVPN policy rules can now be set to route matching traffic
through either the tunnel, or to your ISP (allowing you to
create exceptions to your tunnelling rules)
- NEW: Added OpenVPN server setting to let the OS manage
socket buffers (by inserting rcvbuf 0 and sndbuf 0 in
the server configuration)
- CHANGED: Upgraded OpenSSL to 1.0.2a, adding new tls ciphers
to OpenVPN and the https webui
- CHANGED: Updated miniupnpd to 1.9.20150430
- CHANGED: Reverted kernel backport of the parallel printer support,
and reintroduced fix in lprng. This should hopefully fix
the recent printing breakage issues.
- CHANGED: Removed AiProtection's ad blocker, as it's too buggy to
be usable, breaking numerous mobile applications,
and not being configurable in any way.
- CHANGED: OpenVPN policy routing rules are now applied at boot
time (when WAN comes up), so clients who are blocked while
a tunnel is down will immediately be blocked until
the tunnel comes up.
- CHANGED: Upgraded Quantenna firmware to 378_6065 release (AC87)
- FIXED: Router DNS weren't reverted to their original values
when shutting down an OpenVPN client with "explicitexit-notify" enabled. Now we manually clean it up
after the user manually terminates the client - it might
still not be cleaned up after an unexpected shutdown however.
Ideally, users should try avoiding using this setting when
possible.
- FIXED: Some legitimate VPN packets could get dropped due to their
conntrack state. Now, only INVALID packets coming from the
WAN interface are dropped.
- FIXED: OpenVPN client would sometime try to connect before the clock had
been set by NTP at boot time, preventing it from connecting.
- FIXED: AiProtection security check would fail to load when Dual WAN is
enabled
- FIXED: Various fields would allow you to enter a single quote character,
which could break the webui. Now these fields re-validate the
content after you deactivate the text field.
- FIXED: Switching between All Traffic and Policy Mode OpenVPN routing while
the option to block traffic when the tunnel goes down wasn't
378.53 (26-Apr-2015)
- NEW: Merged with Asus GPL 378_4980 (with pieces from 378_4850 for AC56/AC68
and 378_5183 beta for AC87)
- NEW: OpenVPN policy routing. You can select client IPs or destination
IPs which you want to route through your VPN tunnel. You can enter
a single IP (192.168.0.1) or a whole subnet in CIDR format (for
example 74.125.226.112/30).
You can optionally block WAN access to these as well when the
tunnel goes down.
- NEW: Ad blocker based on Trend Micro's Web Reputation System (WRS).
This is an EXPERIMENTAL feature implemented by Asus but that
isn't enabled in the stock firmware.
- CHANGED: Updated Tor to 0.2.5.12
- CHANGED: Those providing a signed SSL certificate for httpd can now
provide chain certificate. The three PEMs must be in
that order: client, intermediate, CA. (Patch by sasoiliev)
- CHANGED: The setting to enable the neighbour solication filter rule
for Comcast's request flooding was changed to "ipv6_ns_drop",
and now defaults to "0" as this hack causes issues with
other ISPs.
- CHANGED: Backported dnsmasq patch that reverts a fix for Windows 8
clients as it could cause issues with other clients.
- FIXED: DNSFilter would fail if you had it set to "Router", and didn't
have a DNS IP entered on the WAN page.
- FIXED: MSS clamping wasn't applied to traffic in both direction, moved
it to the mangle table.
- FIXED: OpenVPN client firewall "external" mode does not exist - removed
from the webui.
- FIXED: PPTP account list could become corrupted after removing an entry
on the PPTP server page.
378.52_2 (5-Apr-2015)
- CHANGED: Updated AiCloud prebuilt binaries for MIPS models
- CHANGED: Applied kernel patch for MIPS kernel ported from 376_3861,
related to CTF support
- FIXED: AiCloud would fail to start unless you had HTTPS enabled for
the webui (causing the key/cert to be missing)
- FIXED: DDNS hostname would become corrupted after backing up
your router configuration (Asus bug)
378.52 (3-Apr-2015)
- NEW: Merged with Asus GPL 378_4608
- NEW: Added ECDHE support to the webui (when accessed over HTTPS)
- NEW: The DHCP server can now provide a second DNS to its clients
- NEW: You can tell the router not to advertise itself as a DNS
- NEW: Experimental Tor support (feature originally developed by
Asus, but not available yet on stock firmware). You can
enable it in the VPN section of the webui.
- CHANGED: Updated miniupnpd to 1.9.20150309
- CHANGED: You can no longer disable the JFFS2 partition if
Traffic Analyzer is enabled. Likewise, you can
378.51 (6-Mar-2015)
- CHANGED: Updated OpenSSL to 1.0.0q (no real code change)
- CHANGED: Split the changelog into a separate file
- CHANGED: Added logging on custom config/script execution.
An error message will also be logged if those
are disabled while such a file is found.
- CHANGED: Allow pasting the password in some fields that would
disable it (patch by gfairchild)
- FIXED: RSSI not reported for guest clients (beta 1 regression)
- FIXED: DM failing to install on RT-AC66U (beta 1 regression)
PCP fix)
disk
in 2769)
RT-N66U
*
*
*
*
-
374.43_2 (7-June-2014)
- FIXED: NTFS disks couldn't be mounted (Paragon driver not
loading due to a kernel change) (AC56, AC68)
374.43 (6-June-2014)
- NEW: User-configurable refresh period to trigger a DDNS
update after a certain number of days.
- CHANGED: dnsmasq option 252 now defaults to an empty string,
to silence broken clients such as Win7.
Important: if you were previously using a customized
252 reply (to use with a valid wpad/pac file), you
374.41 (18-Apr-2014)
- NEW: Merged with Asus's 374_5047 GPL. Notable changes:
* Fixed RT-AC68U random reboots
* Additionnal security fixes
* Improved Media server, SMB and FTP webui
* minidlna and radvd updates
- NEW: PCP support (Port Control Protocol)
- NEW: Option to allow/deny FTP access from WAN. Default is to
reject WAN connections. The option can be found on the
USB Servers -> FTP Share
- NEW: Option to control web redirection while Internet is
down (configurable on the WAN page).
- CHANGED: Upgraded miniupnpd to 1.8.20140401.
- CHANGED: Disk idle exclusion now supports up to 9 disks.
- FIXED: WOL wasn't working (Asus bug in 4887/5047)
- FIXED: Replaced webui glue with permanent concrete. It won't
fall again.
- FIXED: Language dropdown not properly shown with 8-bit
characters.
- FIXED: Comcast's IPv6 network would flood the LAN with
neighbour solicitation packets, which should normally
not cross beyond their modem. There is now an ip6tables
rule to filter out those packets, preventing your log
from being spammed with table overflows. The filter is
is enabled by default and can be disabled by setting the
"ipv6_neighsol_drop" nvram setting to "0". (rule suggested
by diplomat7)
- FIXED: EMF wasn't properly configured after wireless was
restarted (patch from Vahur)
- FIXED: Router crashing when more than around 30 static routes
were entered
- FIXED: webui would die for some users when accessing the VPN Server
config page and there were connected OpenVPN clients
- FIXED: Added missing iptables-save on ARM platform (AC56, AC68)
- FIXED: nvram factory default reset would sometime fail on MIPS
devices (N16, N66, AC66) (Patch by ryzhov_al)
- FIXED: Under a certain situation the router could lose track of
whether an OpenVPN server/client instance was running or not.
This could result in the webui trying to restart it, and
returning an error message because it was already running.
- REMOVED: The Media server database location is no longer
configurable, as we've switched to Asus's new
automatic location selection.
- REMOVED: Removed the Run Cmd page as it was a security
risk. This is also needed to keep in line with
recent security fixes Asus applied to the
httpd backend to limit what external processes
it can run, otherwise any malicious page could
run arbitrary commands on your router if you
were currently logged on a separate tab.
374.40 (6-March-2014)
- KNOWN ISSUE: Some people are experiencing random reboots
with the RT-AC68U running firmwares based on recent Asus GPL.
If you are are affected, please revert to 374.40 alpha4 for now.
Asus are looking into the issue, which affects this model since
374_4422.
- FIXED: Asuswrt was calling wl_defaults() every time the
wifi was restarted, causing Regulation Mode to be
overwritten. Now we force it to h mode if the
router model and region requires DFS compliance
(same as Asus's code, except we won't enforce
it to off in other scenarios, and will only do
so if it was previously set to off).
- FIXED: Advanced wireless page broken on Internet Explorer, due
to missing Array.IndexOf() support in IE (Asus bug)
- FIXED: Incorrect model detection prevented CPU temperature
from being shown on the Sysinfo page on the "R" SKUs.
374.40 Beta 2 (5-March-2014)
- FIXED: Numerous buffer overruns in networkmap that would result
in crashes or empty/incomplete device list. Was often
visible on networks hosting a Windows Home Server machine.
(Asus bug)
- FIXED: Site survey was reporting 5G as being disabled on RT-N16.
- FIXED: Various issues related to the helper.sh script for postconf
- FIXED: The OpenVPN instance wasn't restarted if it was currently
stopped due to a syntax error in its config and you had
just corrected it.
- FIXED: Restarting the wireless service would stop emf/igs snooping
until they were manually restarted/recconfigured. (Asus bug)
- FIXED: Channels above 153 were missing on 5 GHz band if width
is set to 40 MHz (Asus bug)
- FIXED: reg_mode was being enforced to "h" (EU region) or "off"
(others) since GPL 4422. We now stick again to what's
set in the webui by the end user.
- FIXED: Allow LAN traffic while dualwan mode is set to lb (issue
caused by the default policy fix in beta 1)
374.40 Beta 1 (1-March-2014)
- NEW: Merged with Asus's 374_4561 GPL. Notable changes:
* Various security-related fixes
* Redesigned Parental Control webui
* Notification in case of insecure configuration
- NEW: Added OpenDNS Family Shield support to DNSFilter
- NEW: Added support for up to three user-defined servers to DNSFilter
- NEW: Added option to force DNSfilter clients to always use the DNS
provided to them by the router's DHCP server (which will be
the router itself if you didn't change it on the DHCP
webui page)
- NEW: Option to disable the DHCP6 Server (code contributed by
kdarbyshirebryant)
- CHANGED: The RT-N66U is now compiled with EM enabled
by default. That means there will no longer be a separate
experimental build for this.
- CHANGED: Updated dropbear to 2014.63
- CHANGED: New type of glue for the webui header
- CHANGED: Switched to a shorter version numbering scheme
- FIXED: RT-N16 firmware (missing files were obtained from
the new GPL release Asus made for this model)
- FIXED: Last24 page wasn't properly displaying the
Avg value (regression in 374.39)
3.0.0.4.372.31_2 (28-July-2013):
- FIXED: Samba wouldn't start due to missing symlink (RT-AC56U)
3.0.0.4.372.31 (24-July-2013:
- NEW: Merged with 372_1393 code from Asus. Notes:
* Beamforming support for RT-AC66U/RT-AC56U
* RT-N66U driver still downgraded to build 270 (which
means no HW acceleration for PPP, but more reliable
connectivity on the 5 GHz band)
* Minidlna was updated to 1.1.0
* AiCloud security hole fixed
* Parental Control ui still broken under IE10 (use Fx or Chrome
for now)
- NEW: YandexDNS. Asus is currently implementing support in the
firmware for this DNS-based filter. This can be
found under Parental Control. See http://dns.yandex.ru/
for more info (go go Google translate!).
(Experimental builds only)
- NEW: User-provided client config files (ccd) for OpenVPN server.
See the OpenVPN and Custom Config sections of the firmware's
documentation for more info.
- CHANGED: Connections list under System Log will now progressively
display the result while the router is still
resolving IPs (if that option was enabled).
- CHANGED: OpenVPN client password hidden by default (and added
checkbox to display it similar to what Asus added
to the System page)
- FIXED: Sysinfo page was reporting IPv6 as reason for
CTF to be disabled - since 372 that is only true
for ARM devices.
- FIXED: OpenVPN Server in TAP mode + DHCP wasn't routing
properly (DHCP was overruling the default GW)
3.0.0.4.372_30_3 (11-July-2013):
- NEW: Added support for newest RT-N66U hardware revision.
This router has a new model of flash, you can NOT
use any older FW on these. (RT-N66U)
3.0.0.4.372.30_2 (7-July-2013):
(note: since people always thought adding a "b" meant "beta'
rather than revision "b", I am switching to Asus's new
numbering scheme, hence "30_2" for this revised 372.30.)
- FIXED: NAT loopback (invalid iptable rules was silently accepted
by iptables)
- FIXED: Removed empty Yandex tab
- FIXED: Entware setup script missing from all builds
- FIXED: pptpd failing to start (was missing from build)
- FIXED: OpenVPN server not starting if using a static key
- FIXED: Disks plugged to USB 2.0 port weren't getting mounted
(RT-AC56U)
3.0.0.4.372.30 (5-July-2013):
- FIXED: Wifi status icon would remain half-lit if 2.4 GHz was
disabled on a router without 5 GHz support (RT-N16)
- FIXED: Various fixes related to site survey display
- FIXED: Improved compatibility with USB disks > 2 TB
(must use ext2 or ext3)
- FIXED: Unable to clear DMZ IP (fixed in 364 webui files)
- FIXED: PPTP/L2TP Internet connection unable to connect at boot
(bug introduced in 358.28)
- FIXED: PPTP/L2TP Internet connection unable to reconnect after
going down (unsure if Asus bug or 358.28 bug)
- FIXED: Numerous bugs in the Per IP traffic monitoring causing
inaccurate traffic accounting if there was too much
traffic, or if update requests occured in a too short
period of time.
- FIXED: Asking for traffic monitoring (regular and Per IP) database
to be re-created would re-create it again on next reboot if
in the mean time you didn't change any other settings,
causing the flag not to be cleared on the mtd partition.
3.0.0.4.354.28 Beta 1 (19-Apr-2013):
- KNOWN ISSUE: 5 GHz 40 MHz is unreliable with some wireless
cards (RT-N66U)
- KNOWN ISSUE: Sort order is sometimes wrong on the Site Survey page
- NEW: Wireless site survey (on the Wireless tab)
- NEW: openvpn-event user script that gets run when a tunnel goes
up/down. Read the OpenVPN documentation on the "up" and
"down" events for more on how to use this script, and to use
the passed parameters.
- NEW: Enabled sftp support in Dropbear (the sftp server must be
installed from Entware)
- NEW: Option to prevent SSH port hammering (patch submited by dodava)
- CHANGED: Merged with webui pages extract from the Asus released FW,
as they were more recent than the GPL ones
- CHANGED: Port state on Sysinfo page now uses the new OUI lookup
code from Asus
- CHANGED: Try to report on Sysinfo what is forcing HW acceleration
to be disabled
- FIXED: Build 354 reduced minimum syslog level to WARNING - bumped
back to INFO as in previous versions (resolves DHCP events
not being logged). Also ensured we readjusted it if DHCP
logging is enabled, to handle routers that got upgraded
with the new loglevel already set.
- FIXED: Port numbering on the Sysinfo page for devices that has
them backward (untested) (RT-N16)
- FIXED: Client list wasn't using the new OUI code from Asus (was
missing from the GPL archive)
- FIXED: LAN traffic going through the NAT loopback would be counted
in the Per IP traffic monitoring.
- FIXED: IE rendering of the Other Settings page when toggling Per
IP monitoring
- FIXED: Cannot set webui to HTTPS-only (causes port conflict error)
(Asus bug in 354)
- FIXED: Cannot create/modify folders in AiDisk
- FIXED: Couldn't resolve LAN hostnames if WAN was down (the web
redirection would hijack all DNS queries). Now, we let
dnsmasq handle both LAN and redirected queries.
- FIXED: Fixed support for Broadcom Wimax devices
- FIXED: smbpasswd wasn't properly updated when deleting a user
(Asus bug)
3.0.0.4.270.24 (13-Feb-2013):
- NEW: Rebased on 3.0.0.4.270. Notable changes:
o New driver builds (these are NOT the new major versions that
Asus are still working on)
o NTP-related changes
- NEW: Report CTF (HW Acceleration) state on Sysinfo page.
- NEW: Display Ethernet port states on the Sysinfo page.
- NEW: Replaced Busybox fsck/mkfs tools with those from e2fsprogs,
should be more reliable.
3.0.0.4.264.22 (15-Dec-2012):
- NEW: Rebased on 3.0.0.4.264 (from the RT-N53 GPL).
- NEW: Traffic monitoring per IP added to the Traffic Monitor section.
Based on the Tomato IPTraffic implementation by Teaman.
- NEW: Option to disable the Netfilter SIP helper (Firewall page),
allows people to manually forward port 5060 to their own SIP
server
- NEW: Option to enable/disable logging DHCP client queries
(LAN->DHCP page)
- FIXED: Tabs would disappear while on the Monthly traffic page.
- FIXED: Really fixed Firefox issue (the fix wasn't merged
in release 260.21).
- FIXED: Router crash if the list of MAC filters + their names got
too long.
- FIXED: OpenVPN webui: TLS Reneg and Connection Retry wouldn't let
you enter -1 as value.
- FIXED: Layout issues on the DHCP page (one in Asus code, another
in Merlin code)
- FIXED: Beeline Corbina was unable to connect to PPTP/L2TP server
due to DNS issues.
- CHANGED: System log starts at the bottom (backported from GPL 314)
- CHANGED: Dual WAN is no longer enabled in regular builds - too many
issues with it at this point. Regular USB failover
still works.
3.0.0.4.260.21 (5-Dec-2012):
- NEW: Rebased on 3.0.0.4.260. This version should
resolve issues with some Russian ISPs. Note that
the RT-N66U build still uses the wireless driver
from release 220, as this seems to be the most stable
at this time.
- NEW: Option to force the router into becoming the SMB Master Browser.
- NEW: Option to make the router act as a WINS server.
- NEW: Option to control Spanning-Tree Protocol
- NEW: fstab custom config file
- FIXED: Firefox compatibility issues on the DHCP static and
MAC filter name fields.
- FIXED: Wifi status icon wasn't accurately reporting states if they
were changed by a radio schedule.
- FIXED: QIS would report newer firmwares, potentially overwriting
Asuswrt-Merlin with an original Asus firmware.
- FIXED: Wifi LEDs would turn back on if radios were enabled while
in Stealth Mode (now they turn back off after a few seconds)
- FIXED: Webui would break if a network device had an invalid
NetBIOS name (such as the Sonos Dock).
3.0.0.4.246.20 (14-Nov-2012):
- NEW: Wifi status icon will be half colored if only one radio is
enabled.
- NEW: Wifi status icon popup will report the state of each radios.
- NEW: upnp custom config file for miniupnpd
- NEW: unmount user script
- NEW: led_ctrl and makemime (for use in conjunction with sendmail)
applets.
- NEW: Implemented control for network switch LEDs (all four at once)
- NEW: Stealth Mode: option to disable all LEDs
- NEW: Added CONFIG_IP_NF_RAW and CONFIG_NETFILTER_XT_TARGET_NOTRACK
modules.
- FIXED: Radio toggle through WPS button would be overriden by a
scheduled radio. Reverted "switch" to "toggle" code to
prevent this.
- FIXED: You couldn't disable DMZ by clearing the IP field.
- FIXED: You couldn't edit entered text in DHCP/MAC/etc name field
- FIXED: clientid passing for some ISPs requiring it (like Sky UK)
was broken with the DHCP client change of build 220.
- FIXED: No longer reboot the router three times during boot time if
one of the radios is disabled by the user. (RT-N66U)
- FIXED: Changing the router login name to anything other than "admin"
would prevent radvd, ecmh and the cru script from working
properly - they all assumed "admin". Made then use
http_username instead (which is tied to the superuser)
- CHANGED: Improved SMB and vsftpd read performance by up to 30%
3.0.0.4.246.19b (26-Oct-2012):
- FIXED: Reverted wireless driver to build 220 version as the new
one caused various connection issues for some (RT-N66U).
3.0.0.4.246.19 (23-Oct-2012):
- NEW: Rebased on 3.0.0.4.246. Some notable changes:
o New "Enhanced interference management" option under
Wireless -> Professional.
o Improved AiCloud webui
o dnsmasq updated to 2.64
- NEW: Option to enable simpler share names. When enabled, the folder
Share will be shared as "Share" instead of "Share (on sda1)".
The option can be found on the Misc tab, under USB Application.
- NEW: User customized config files for various services. Those custom
config entries can either be appended, or completely replace the
config file generated by the firmware.
- NEW: Added Name field to the Wireless ACL page.
- NEW: Added service applet to rc. For example, "service restart_samba" will
restart the Samba service. For advanced usage/debugging only.
- NEW: Backported OpenSSL ASM optimization from 1.0.1, for significant perfor
mance
improvements in applications such as OpenVPN or SSH when using AES.
- NEW: Report the current CFE/Bootloader version on the Sysinfo page.
- FIXED: Minor tweaks to the AiCloud pages so they can fit on a 15" laptop sc
reen
(some close buttons at the bottom were unreachable)
- FIXED: Enabling SSH access from WAN didn't work if DualWAN
was set to load-balancing.
- FIXED: Removed MAC Filter page, as it doesn't work (not compatible
with Parental Control).
- FIXED: OpenVPN Client "Username Auth only" option was broken.
- FIXED: Limit valid characters in a DHCP/WOL description to prevent
breaking the webui by using invalid ones such as quotes.
- FIXED: OpenVPN Client wasn't properly applying DNS settings that
the server was pushing to us.
- FIXED: Wireless client list alignment in AP mode.
- CHANGED: Less strict rules when validating user-entered MAC hwaddr.
3.0.0.4.220.18b (25-Sept-2012):
- NEW: Report both rx and tx rates on wifi connections
- FIXED: Handle cases where the wireless driver returns a speed of -1
- FIXED: Removed rssi retrieval retries, as it would make the first access to
the wireless page take forever if you had multiple connected clients
.
You will have to manually refresh the page the first time you access
it
if the RSSI is reported as "??".
3.0.0.4.220.18 (23-Sept-2012):
- NEW: Added OpenVPN logging verbosity setting (vpn_loglevel, must be
manually set to a value between 0 and 15, with 3 being the default).
- FIXED: Buffer overrun in init code that would crash the router when
too many features were enabled at compile time.
- FIXED: Re-enabled DualWAN (RT-N66U, RT-AC66U)
- FIXED: Re-enabled Beceem (Wimax) support in RT-AC66U.
- FIXED: OpenVPN 'Start with WAN' and 'Respond to DNS' settings were
not properly saved.
- FIXED: First time a client's rssi is polled it would return 0.
- FIXED: post-mount user script wasn't executed (regression in 220.17)
- CHANGED: Added some info to the OpenVPN server and client pages.
- CHANGED: Improved load time of the VPN Status page.
3.0.0.4.220.17 (18-Sept-2012):
- NEW: Rebased on 3.0.0.4.220, which includes:
* Fixes to IPv6 6rd
* Fixes to AC66U Wifi + QoS
* AiCloud
* Interference mode once again enabled
- NEW: Display last received rate and rssi for each clients on Wireless Log pa
ge.
- FIXED: dnsmasq not listening to DNS requests from OpenVPN clients
if you had just enabled the option on the webui.
- FIXED: PPTP clients not always showing on VPN Status page.
- CHANGED: Disabled DualWAN as it's currently broken in 220.
- CHANGED: Disabled Beceem Wimax support in RT-AC66U as it bricks
the router.
- CHANGED: Removed firmware update checker to avoid accidental
revert to original FW.
3.0.0.3.178.16 Beta:
- NEW: (RT-N66U, RT-AC66U) Implemented OpenVPN, based on code written by
Keith Moyer (from the Tomato project).
- NEW: Added crontab command
- FIXED: (RT-AC66U) Would crash when accessing a LAN device through either
VPN or the NAT Loopback (GRO is now disabled for that device)
- FIXED: dnsmasq was listening to all interfaces by default, allowing
even dhcp requests to be serviced from the wan side if you
had the firewall disabled (Asus bug) (fixed by dev0id)
- FIXED: Default disk idle spindown now set to 0 (disabled).
- FIXED: Corrupted WOL list when using IE.
- CHANGED: Upgraded openssl to 1.0.0j.
- CHANGED: Included fully functional openssl command (will allow you to
create keypairs and certificates from the router).
- CHANGED: Removed power adjustments from the Performance page, as they
are redundant, and not as reliable.