Professional Documents
Culture Documents
HTL-04 Thermal Conductivity of Liquid
HTL-04 Thermal Conductivity of Liquid
HTL-04 Thermal Conductivity of Liquid
Date :01/03/2006
HTL-04
DESCRIPTION
Thermal conductivity of liquid apparatus is based upon guarded hot plate method. The main
heater in aluminium heating chamber heats a thin layer of liquid. Top portion of this heater is guarded
against heat loss by a top and ring guard heater. A cooling plate removes heat through liquid layer,
ensuring unidirectional heat flow. Temperature is measured across the liquid layer. The apparatus is
insulated by glass wool bags.
FEATURES
1.
Three thermocouples on either sides of the liquid layer enabling to take average temperature.
2.
3.
4.
RANGE OF EXPERIMENTS
1.
2.
3.
PAGE 1 OF 2
HTL-04
SPECIFICATIONS
1.
2.
3.
4.
5.
0-50/100 volt
B) Ammeter :
0-2 amp
C) Dimmerstats :
D) Digital temperature indicator 0-200c with 0.1c least count using Cr-Al
thermocouples, provided with cold junction compensation
E) Voltmeter and Ammeter selector switch.
SERVICE REQUIRED
230 V ,15 amp electric supply with earthing connection .
Constant head water supply at the rate of about 15 lit/min
FLOOR SPACE
3.5 m x 1 m approximately
INSTRUCTION MANUAL
A manual is supplied with the product which describes the equipment and the test procedure along with
necessary calculations.
Note:
1. Since research and development is an on going activity, the specifications mentioned herein are subject to
Change without notice.
2. Photographs / Illustrations are only indicative in nature and will change with the exact model / specifica
the client.
PAGE 2 OF 2