Professional Documents
Culture Documents
En Ladycomp Instructions 2008
En Ladycomp Instructions 2008
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Congratulations
................................................... 3
Please read these instructions attentively and completely for your own
safety. You will find everything that you need to know about this device in
the table of contents or in the alphabetical index.
The most important things first . . . . . . . . 7 Menstruation data “M” . . . . . . . . . . . . . . 18 Further information . . . . . . . . . . . . . . . . . 26 Planning level. . . . . . . . . . . . . . . . . . . . . . 32
Activating “M” Back in operation after interruption Pregnancy planning
Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Correcting “M” Travelling / Time zones Sex prognosis
Enter menstruation data at a later time Shift work Entering “SI” data
Self-testing and switching on and off . . . 9 Summer and winter time Conception date and birth date
Fertility display. . . . . . . . . . . . . . . . . . . . . 20 After taking the pill
Lady-Comp operating levels. . . . . . . . . . . 10 The device gets to know your cycle No temperature readings Pregnancy . . . . . . . . . . . . . . . . . . . . . . . . 34
Pregnancy display Lady-Comp Cleaning the thermometer Pregnancy display
Function keys. . . . . . . . . . . . . . . . . . . . . . 11 Potential fertility display Pearl-Index Pregnancy confirmed
Retroactive fertility display Data print-out Back in operation after pregnancy
Lady-Comp display . . . . . . . . . . . . . . . . . 12
Cycle statistics Lady-Comp . . . . . . . . . . . 22 Technical details . . . . . . . . . . . . . . . . . . . 28 Cycle and planning statistics . . . . . . . . . . 36
Necessary settings Mono-phases Deleting saved data Data analysis, print-out and consulting service
before commencement . . . . . . . . . . . . . 13 Query cycle statistics Regulating the brightness
Data analysis and print-out Mains supply
No risk of loss of data Alphabetical index . . . . . . . . . . . . . . . . . . 38
Battery
6 . . . . . . . . .Connecting
. . . . . . . . . . . . Lady-Comp/Baby-Comp
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .The
. . . . most
. . . . . . important
. . . . . . . . . . .things
. . . . . . .at
. . .first
.................... 7
Lady-Comp/Baby-Comp will be delivered with Recharge battery • You can take your temperature early in the morning right after waking up.
an integrated battery and a separated mains Please observe the sequence below:
• Always take your temperature immediately after waking up, before getting up, i.e. before
power plug (comp. page 29). 1. First insert the socket of the mains power
becoming active. (morning temperature = basal body temperature)
unit into the connecting socket A
You can operate Lady-Comp/Baby-Comp 2. Then establish mains connection • If you have past menstruation data, please enter it before the first temperature reading.
• Optionally at the mains or 3. Recharge battery
• With the integrated, rechargeable battery 4. Dissolve mains connection • The alarm clock must be set on the previous day before 12 p.m. and must be activated
(at home and/or on holiday) 5. Unplug the socket of the mains power unit for the first day of application.
from connecting socket A • Please stop taking the pill before starting.
When you receive the device, the battery is not Because: The programme is based on the fact that the ovulation is accurately identified.
charged. • Now Lady-Comp / Baby-Comp is ready for The pill, however, prevents the ovulation.
• The first time the battery should be recharged use for approx. one month.
approx. 24 hours. • When the display BA 9-1 is shown, the • The coil which is doped with hormones must be removed before beginning. In case of a
• When recharging the battery is completely battery must be recharged again. copper coil it is recommended to remove it.
recharged after approx. 12 hours.
Connection
On the rear of the device:
Right from the beginning the programme works with entered historical data. The more
• Socket of the mains power unit in
regularly you take your temperature, the faster the device learns to know and
connecting socket A
interprets your individual cycle.
• Sensor in connecting socket B
A B It shows more and more green days (infertile days) and the red days (fertile days) are
more and more limited.
Important: Please first establish connection A,
then establish mains connection.
8 . . . . . . .Basics
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Self-testing
. . . . . . . . . . . . .and
. . . . switching
. . . . . . . . . . .on
. . . and
. . . . .off
............... 9
When putting into operation sample values are Switching on the device
saved in your Lady-Comp/Baby-Comp. These • Press any button.
Display values are automatically deleted as soon as • The current time is shown.
you have made your own first temperature
reading. The sample values appear again if you
ever delete your data. Automatic switching off and automatic return
to the alarm display
Function keys Self-testing and trial readings • If you do not press any button for 30
Lady-Comp/Baby-Comp shows all displays as seconds, the device automatically returns to
part of a test. the alarm display.
• When you press the plus and the minus but-
Proceeding from the time display: ton simultaneously, the device automatically
• Press the plus button 3 times. returns to the alarm display.
• Lady-Comp/Baby-Comp now runs through • When using the mains operation, the device
all its symbols independently. The device returns to the pre-set dimming level after 30
tests itself and indicates this in the display seconds.
window.
• When the test is completed the time appears When using batteries:
Sensing device and the thermometer symbol is illuminated. • If no button is pressed, Lady-Comp/Baby-
• If you now press the round button, the ther- Comp switches off automatically after 30
mometer flashes and is ready for a reading. seconds. Then the display is dark until the
• If no trial temperature reading should be next time when a button is pressed or the
made, then press the minus and plus button alarm clock rings.
Sensor simultaneously.
10 . . . . . . . . .Lady-Comp
. . . . . . . . . . . . .Operating
. . . . . . . . . . .levels
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Function
. . . . . . . . . .keys
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
...
press shortly = switch it on
TIME LEVEL Lady-Comp/Baby-Comp have different operating levels.
ALARM CLOCK ALARM TIME TIME DATE YEAR Please use the function keys for all inputs and in order to select the different levels.
2. Enter BMI 3. Enter past menstruation data “M”, if any 5. Temperature reading the next morning 7. Menstruation data
BMI = Body Mass Index: date of birth, weight If you have past “M” data about your cycle, Take your basal body temperature after After the temperature reading the
and height. Entering the data facilitates the you can enter this data into the device before waking up in the morning. The basal body “M” = menstruation possibly flashes.
cycle evaluation. the first temperature reading. Activate “M” as temperature is the temperature of the body just • If you are menstruating, press the plus
described on page 19. after waking up, before getting up and before button, “M” remains illuminated.
Proceeding from the time display: becoming active in any way. More information • If you are not menstruating, press the minus
• By simultaneously pressing the plus/minus Only the first “M” day is to be entered per on temperature reading on page 17. button, “M” disappears from the display.
button for 5 seconds, these values can be cycle, the device saves automatically three “M” • Enter “M” on at least three consecutive
entered. days. Begin with the input of the furthest men- days.
• First the year of birth appears, the birth struation back in time. 6. Fertility indicators • If you are menstruating and the device does
symbol lights up. The device shows your temperature reading not ask you for input, activate “M”
• By pressing the plus or minus button the value and your fertility for the day: (see page 19).
year of birth can be entered. 4. Activating the alarm red fertile
• Input completed: press and hold the round Proceeding from the time display: green infertile
button for 5 seconds. • Press the minus button once. The alarm yellow learning area and transition area
• By pressing the round button you can pro- setting appears. red flashes prognosis ovulation day
ceed the same way for your height, confirm • Press the minus button again, the bell
this by pressing and holding for 5 seconds. symbol flashes. Ready to take a temperature reading
Afterwards press the round button again and • Press the plus button = the bell remains The device is ready to take a
enter your weight and confirm by pressing constantly illuminated. You will be woken up temperature reading:
and holding for 5 seconds. at the desired time. • +/- 3 hours before or after the alarm
• Shortly press the round button to save data clock rings.
and return to the time display. • +/- 3 hours before or after the
previous temperature reading time.
16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Temperature
. . . . . . . . . . . . . reading
...................................... 17
Temperature reading time limit Taking your temperature, general information Temperature reading Interruptions when taking your temperature
Lady-Comp/Baby-Comp controls the tempera- Taking your basal body temperature reliably Lady-Comp/Baby-Comp wakes you up Should there be interruptions when taking your
ture reading time limit. It comprises 6 hours, every day is one of the key elements of our with a signal tone. temperature, e.g. by moving the thermometer
beginning and ending three hours before and system. The basal body temperature is the By pressing any button, the alarm tone in your mouth, the temperature reading is
after the temperature reading time, if differing temperature immediately after waking up, can be switched off. automatically extended. The temperature read-
from the alarm setting time. Temperature can before getting up, before becoming active in ing value flashes to indicate an interruption.
only be taken once a day, within the tempera- any way. The thermometer symbol is illuminated.
ture reading time limit. Before the first tempera- It is ready for a temperature reading. Terminating a temperature reading
ture reading, the alarm clock must be activated. The more regularly you take your temperature, Now place the thermometer under your If you do not take your temperature or you
particularly at the beginning, the faster the tongue, right at the back, either to the would like to terminate the temperature reading,
The thermometer symbol remains illuminated device gets to know your personal cycle. left or to the right of the frenulum and you can terminate a temperature reading by
throughout the temperature reading time limit. close your mouth. To take your tem- simultaneously pressing the minus and plus
If there is no temperature reading for one day, perature, press any button. button. An acoustic signal can be heard. The
the temperature reading time limit is left open Information on taking your temperature device terminates the temperature reading.
and must be set again by the alarm clock. Place the thermometer under your tongue, The thermometer symbol flashes. The The temperature reading is left out for this day.
Normally the alarm setting time and the tem- right at the back, either to the left or the right temperature reading takes approx. 60
perature reading time are both the same. We of the frenulum and close your mouth. While seconds. The display shows tempera- Fever
recommend that you allow Lady-Comp/ taking your temperature, the thermometer ture reading values from 34.50 to 41.00 If the temperature reading value indicates that
Baby-Comp to wake you up. should not be moved. You will get the best degree Celsius. the temperature is too high (higher than 37.80),
results when choosing the same thermometer an “F” for fever appears on the display alter-
If you wake up within the temperature reading position every day. When finishing the temperature reading you nating with the temperature reading. It is re-
time limit, e.g. to look after your child, take hear a signal tone and the ascertained tem- commended to interrupt the daily temperature
your temperature. If you get up late and the perature reading value appears on the display. reading in case of feverish cold or when taking
temperature reading time limit is over, there is medication to avoid entering “abnormal”
no temperature reading for that day. values into the device.
18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Menstruation
. . . . . . . . . . . . . .data
. . . . . “M”
................................ 19
Basically, you enter “M” on the days that you Enter “M” after using the device for some time Activating “M” Entering “M” at a later time
have “M”. However, this should be on at least When Lady-Comp/Baby-Comp knows your If you have “M” on a day that Lady- If you have not taken a temperature reading for
three consecutive days. cycle, the device only asks about “M” when Comp/Baby-Comp does not ask for “M”, some time (e.g. on holiday), but menstruated
menstruation is expected. please activate “M” yourself. during this time, you can retroactively enter
this data.
Enter menstruation data at the beginning • It begins to ask 2 days before (“M” flashes). Proceeding from the time display:
After the temperature reading the • When “M” is finished, Lady-Comp/Baby- • Press the round button. You see today's You can go back to the desired date if no tem-
“M” = menstruation symbol possibly Comp stops asking for “M”. temperature reading with the fertility report. perature reading value is available. Begin with
flashes. • Now press and hold the round button for the furthest menstruation back in time. You
The first bleeding after stopping the pill is no 5 seconds. “M” flashes. can always correct “M” on the three previous
• If you are menstruating, press the plus button, menstruation, but a pill-conditioned withdrawal • Enter “M” by pressing the plus button. “M” days.
“M” remains illuminated. bleeding. Do not enter “M” for this bleeding. remains illuminated.
• If you are not menstruating, press the minus • You go backwards with the minus button to
button, “M” disappears from the display. The following days Lady-Comp/Baby-Comp the desired date.
• A signal confirms the input, the current cycle Correcting “M” will ask for “M” automatically. • Now hold the round button for 5 seconds.
day appears on the display alternating with Incorrect “M” data can only be retroactively “M” flashes.
the temperature reading value. corrected for the last three days. • Press the plus button and enter “M”.
“M” remains illuminated.
If you want to correct or add “M” days, begin
with the furthest menstruation back in time. In case of correction or subsequent input: • In case of correction.
Proceed as described in Enter “M” at a later The input is only required for the first “M” Negate “M” with the minus button.
date. day. The device automatically enters the
two subsequent days.
20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fertility
. . . . . . . . displays
....................................... 21
17
Fertility displays The device gets to know your cycle Potential fertility display Retroactive fertility display
Lady-Comp/Baby-Comp supplies information The more regularly you take your temperature, Proceeding from the time display: All previous temperature reading values can be
concerning fertility on every day of the cycle by particularly at the beginning, the faster the • Press the round button once. retrieved up to 180 days with the Lady-Comp
using coloured display lamps. device gets to know your personal cycle. • Press the plus button once to gain access to and 250 days with the Baby-Comp. by pressing
the potential fertility display. the minus button several times.
red fertile The number of “green days” increases cau- • Press the plus button several times to see
tiously and systematically. the fertility of the following 6 days. Proceeding from the time display:
yellow learning area and transition • Press the round button once and today’s
area, missing temperature If the device does not receive any more data The actual level of fertility for the day for which temperature value appears, the display alter-
reading value, ovulation late for a long period of time or receives informa- the prognosis is made is shown on the day nates with the current cycle day.
tion that it cannot evaluate, the number of itself. This means that the prognosis for four • Press the minus button once. Yesterday’s
green infertile “yellow” days increases. days from now may be “green”, but if ovulation date will be shown. This display alternates
is late and you are still fertile, the display will with the temperature reading value of the
red flashes Today is the fertilisation show “red” on day 4. respective day.
optimum. Pregnancy display Lady-Comp • Reverse with the minus button.
“red flashes” is a prognosis. Lady-Comp indicates a probable pregnancy • Advance with the plus button.
“red flashes” shows the from the 15th day of conception by the simul- • The reversing stops, if no button is pressed
identified ovulation for taneous flashing of the red, yellow and green for 30 seconds or if you simultaneously
closed cycles. indicators. Every prediction is a statement of probabi- press the plus and minus button.
lity. The fertility of a “prognosis day” may
The pregnancy is confirmed from the 18th day deviate from the fertility ascertained on the
following fertilisation by the simultaneous con- respective day. The current fertility shown
stant illumination of the red, yellow and green is applicable.
indicators. (see also Baby-Comp page 34)
22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cycle
. . . . . . statistics
. . . . . . . . . . .Lady-Comp
.................................. 23
Setting the time Setting the date Switching the alarm on and off
Proceeding from the time display: Proceeding from the time display: If the device has already received one or more Proceeding from the time display:
• Press the round button and hold for • Press the plus button once. The date temperature readings, it is only possible to • Press the minus button once. The alarm
5 seconds. appears. reverse the date setting by one day. If the date setting appears.
• The hours flash. • Now hold down the round button for is reversed, no temperature reading can be • Press the minus button once more and the
• Advance the time setting (hours) with the 5 seconds. The date flashes. made the following day. bell symbol flashes.
plus button. • Press the plus button to advance the date • Press the plus button if you want to be
• Reverse the time setting (hours) with the setting. You can always advance the date by one day. woken up.
minus button. • Press the minus button to reverse the date It is impossible to change the date by accident. • The bell remains constantly illuminated. You
If the plus/minus button is held for more setting. hear an acoustic signal as a confirmation.
than three seconds, the fast mode begins. • Input completed: press and hold the round This is how you can correct the date when tra- • If you do not want to be woken up, you
button for 5 seconds. You hear an acoustic velling in a different time zone. Do not take should press the minus button when the bell
Afterwards shortly press the round button, now signal. The date appears on the display. your temperature on the day of travel. flashes. The bell symbol disappears from the
you can change the minutes in the same way. display.
The year is automatically adjusted when you • The bell lights up at the same time as the
• Input completed: pass 31.12. Once the date has been correctly Alarm tone time display to confirm that you will be
press the round button and hold for 5 entered, it automatically proceeds correctly, At the beginning Lady-Comp/Baby-Comp woken up the next day.
seconds. The flashing stops. You hear an with adjustments for leap years. This is irre- wakes you up with a soft acoustic tone which • If the bell does not light up with the time dis-
acoustic signal to confirm your input. spective of whether the Lady-Comp/ gradually becomes louder and louder. The play, you know that you will not be woken
Baby-Comp is operated with or without mains alarm ends if you press any button. up. This also applies to the following days.
connection or flat battery.
26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Further
. . . . . . . .information
........................................... 27
Deleting saved data Regulating the brightness Mains power unit Battery
Start self-testing (see page 9), now data can (Operating with mains power unit) Lady-Comp/Baby-Comp is delivered with an The integrated battery of Lady-Comp/Baby-
be deleted during or after the self-testing: The pre-set brightness applies to the “time dis- integrated battery and a Euro 110 – 230 V Comp must be connected with the mains
play window” and is maintained by the device mains power unit. power unit to electricity for approx. 12 hours.
• Press simultaneously the round button, the until further changes are made. Now Lady-Comp/Baby-Comp are ready for
minus button and the plus button. The other display windows have always the The mains power unit is a multi-range power use mains-independently for approx. one
• Hold all three buttons for 5 seconds. same normal degree of brightness. unit and can be used with 110 – 230 V. month.
• An “L” for delete appears on the display When you begin to use the device, the display
panel, with a “9” on the right. shows the normal degree of brightness and is Adapters for US; UK; Australia or a ROW (can Repeat the recharging of the battery when
• Now release the three buttons. then reduced to the desired dimming level. be used e.g. as table mains power unit) are BA 9 – 1 appears on the display.
• You must count down this “9” to zero by available as accessories.
pressing the minus button 9 times. The can- Dimming level: By pressing the plus/minus buttons simulta-
cellation process is interrupted if you touch Proceeding from the time display: The devices can only be used with the original neously, you return from the BA-display to the
any other button. At zero it is automatically • Press and hold the round button. mains power unit! time display.
deleted. An acoustic signal can be heard. • Press the plus button for “lighter” or the
• Afterwards the current time appears on the minus button for “darker”. Important! If display falls under BA 1, the
display. No risk of loss of data device cannot be operated any more, recharge
There are three different settings of brightness. In the event of a power cut and flat batteries, batteries.
In so doing, the unintentional deletion of saved there is absolutely no risk of losing the data
data will be excluded. After deleting you will The device can also be completely turned off memorised in the Lady-Comp/Baby-Comp and
find the pre-set example values on the indivi- using the dimming level if the minus button is the data concerning menstrual cycles.
dual displays. After taking your temperature pressed repeatedly until you hear an acoustic
the first time, the example data is automatically signal.
deleted, this is also the case when switching
the device on for the first time.
30 . . . . . . . . . .Operating
. . . . . . . . . . .levels
. . . . . . Baby-Comp
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Display
. . . . . . . . Baby-Comp
.......................................... 31
6 5 7
Pregnancy planning Sex prognosis “SI” input for sex prognosis Conception date and birth date
Baby-Comp shows you the optimum time for During a possible or confirmed pregnancy, If you are planning a pregnancy and are interes- After ovulation has been recognised, Baby-
you to get pregnant. Baby-Comp indicates whether you can rather ted in having a sex prognosis, inform Baby- Comp indicates the possible conception and
expect to have a boy or a girl. Precondition is Comp when sexual intercourse (SI) took place. birth date in the planning level.
Just two days per cycle are considered the “SI” input which you have to enter on the Enter “SI” data the following morning after
to be optimum. These days have no morning after having intercourse. taking a temperature reading. “SI” data can Proceeding from the time display:
significance for the sex of the only be corrected the same day. • Press the round button twice. The current
offspring and so the “boy and girl” Both the “boy and girl” symbol will date appears on the display.
symbols flash together with the date. appear if intercourse took place on Proceeding from the time display: • Now press the minus button and the date of
days on which it is equally likely for • Press the round button twice to get into the conception appears.
In order to plan for a boy, only have a boy or a girl to be conceived. This planning level. • Then press the plus button twice and the
intercourse on the day on which just also applies if no “SI” was entered. • Now press and hold the round button for estimated date of birth appears.
the “boy” symbol is shown. 5 seconds. The “SI” symbol flashes.
Proceeding from the time display: • Say yes for “SI” by pressing the plus button.
If your preference is for a girl, only • Press the round button twice. The current An acoustic signal confirms the data.
have intercourse on the day on which date appears on the display. • The “SI” symbol remains constantly
just the “girl” symbol is shown. • Now press the minus button and you will illuminated.
see the conception date with the symbols
“boy” and/or “girl” and the sperm symbol. If Baby-Comp has received “SI” data, it indi- Before ovulation, the displays and
• Then press the plus button twice and you cates on the fertile days whether there is more symbols flash.
The “boy” symbol lights up one day be- will see the calculated date of birth with the likelihood of conceiving a girl or a boy in the After ovulation they are constantly
fore the first optimum conception day. symbols “boy” and/or “girl” and the birth event of fertilisation. illuminated.
The “girl” symbol lights up one day after symbol. If no prediction is possible,
the second optimum conception day. “----” appears on the display.
34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pregnancy
................................................ 35
calculated. In the event of a confirmed pregnancy the con- At first Baby-Comp shows “yellow”.
The displays for level 2 and 3 do not require The fertility symbols red,
“SI” input. yellow and green flash.
With the cycle and planning statistics you have Press the minus buttons Press the plus buttons Data analysis, print-out and consultation
the possibility to retrieve information about • Press once: • Press once: If you are interested in receiving a detailed
planning a child. This can easily be done by your cycle length on average, e. g. L : 28. your increase in temperature after ovulation analysis of your cycle and a printout of the
pressing a button at home. • Press twice: on average, e. g. 27, data memorised in the device, please send
your length of high level on average, 0.27 degree Celsius increase in temperature your Lady-Comp/Baby-Comp to our address.
Proceeding from the time display: symbol HL: --. • Press twice:
• Press the round button three times. • Press three times: your ovulation range in plus/minus days, In the event of difficulties with your cycle or
Now you are on level 4, the cycle and plan- your mono-phases in % of the last 20 cycles, e. g. 0 – : 02. conception, a printout and evaluation can
ning statistics. symbol PO:--. • Press three times: generally provide valuable information for you
• The number of saved cycles since the • Press four times: your planning hit: left the number of cycles, and your gynaecologist.
beginning is shown, (number in absolute CLI is shown in %, symbol LI:--. right the number of hits, limited to the last
figures), e.g. C 10. (CLI = corpus luteum insufficiency). 20 cycles, e. g. 10:03.
Activating “M” . . . . . . . . . . . . . . . . . . . . . . . 19 Date of birth and conception date . . . . . . . . 33 Mono-phases . . . . . . . . . . . . . . . . . . . . . . . 22 Setting the date . . . . . . . . . . . . . . . . . . . . . . 24
Alarm tone . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Deleting saved data . . . . . . . . . . . . . . . . . . . 28 Setting the alarm . . . . . . . . . . . . . . . . . . . . . 13
Automatic switching off and Display Lady-Comp . . . . . . . . . . . . . . . . . . . 12 Necessary settings Setting the time . . . . . . . . . . . . . . . . . . . . . . 24
return to the time display . . . . . . . . . . . . . 9 Display Baby-Comp . . . . . . . . . . . . . . . . . . . 31 before commencement . . . . . . . . . . . . . . . 13 Sex prognosis . . . . . . . . . . . . . . . . . . . . . . . 32
No temperature readings . . . . . . . . . . . . . . . 27 Shift work . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Back in operation after an interruption . . . . . 26 Entering “SI” data . . . . . . . . . . . . . . . . . . . . 33 “SI” input for sex prognosis . . . . . . . . . . . . . 33
Back in operation after pregnancy . . . . . . . . 35 Enter menstruation data Operating levels Lady-Comp . . . . . . . . . . . . 10 Summer and winter time . . . . . . . . . . . . . . . 26
Basic terms for all input . . . . . . . . . . . . . . . . 8 after some time . . . . . . . . . . . . . . . . . . . . 18 Operating levels Baby-Comp . . . . . . . . 10 + 30 Switching the alarm clock on and off . . . . . . 25
Before commencement . . . . . . . . . . . . . . . . 13 at the beginning . . . . . . . . . . . . . . . . 15 + 18 Ovulation display . . . . . . . . . . . . . . . . . . . . . 20
Body Mass Index BMI . . . . . . . . . . . . . . . . . 14 Temperature reading . . . . . . . . . . . . . . . . . . 17
Brightness, regulation . . . . . . . . . . . . . . . . . . 27 Fertility displays . . . . . . . . . . . . . . . . . . . . . . 20 Pearl-Index . . . . . . . . . . . . . . . . . . . . . . . . . . 27 in general . . . . . . . . . . . . . . . . . . . . . . . . . 16
Fever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Pill and Lady-Comp/Baby-Comp . . . . . 7 + 26 information . . . . . . . . . . . . . . . . . . . . . . . . 16
Charge batteries . . . . . . . . . . . . . . . . . . 6 + 29 Function keys . . . . . . . . . . . . . . . . . . . . . . . 11 Plannibg level Baby-Comp . . . . . . . . . . . . . . 32 time limit . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cleaning thermometer . . . . . . . . . . . . . . . . . 27 Planning statistics . . . . . . . . . . . . . . . . . . . . 36 Thermometer, cleaning . . . . . . . . . . . . . . . . . 27
Coil and Lady-Comp/Baby-Comp . . . . . . . . 7 Loss of data excluded . . . . . . . . . . . . . . . . . 29 Potential fertility display . . . . . . . . . . . . . . . . 21 Travelling/time zones . . . . . . . . . . . . . . . . . . 26
Conception date and date of birth . . . . . . . . 33 Pregnancy confirmed . . . . . . . . . . . . . . . . . . 35 Trial temperature reading . . . . . . . . . . . . . . . 9
Connections . . . . . . . . . . . . . . . . . . . . . . . . 6 Mains power unit . . . . . . . . . . . . . . . . . . . . . 29 Pregnancy display Baby-Comp . . . . . . . . . . 34
Correcting “M” . . . . . . . . . . . . . . . . . . . . . . . 19 Menstruation data “M” . . . . . . . . . . . . . . . . . 18 Pregnancy planning . . . . . . . . . . . . . . . . . . . 32
Cycle statistics Lady-Comp . . . . . . . . . . . . . 22 activating “M” . . . . . . . . . . . . . . . . . . . . . . 19
Cycle and planning statistics Baby-Comp . . . 36 after using for some time . . . . . . . . . . . . . . 18 Regulation of brightness . . . . . . . . . . . . . . . 27
at the beginning . . . . . . . . . . . . . . . . . 15 + 18 Retrospective fertility display . . . . . . . . . . . . 21
Data analysis and print-out . . . . . . . . . . 22 + 37 correcting “M” . . . . . . . . . . . . . . . . . . . . . . 18
Data print-out . . . . . . . . . . . . . . . . . . . . . . . . 27 entering “M” at a later time . . . . . . . . . . . . 19 Self-testing and trial temperature reading .. 9
Development, Manufacturer,
World-wide Distribution and Germany
info@valley-electronics.com
www.valley-electronics.com