Professional Documents
Culture Documents
TVL 2 Installation Instructions
TVL 2 Installation Instructions
The Pop-up TV Co TV Lift system, is specifically designed for easy installation into
cabinetry, AV rooms, meeting rooms, or any type of application where automatic lifting
of equipment is required.
The Lift Column, model TVL-2 is a telescoping type column made
with prefabricated, inter-fitting solid steel tubes, with an internal 24VDC motor-gear box.
The TVL-2 Lift has a maximum load capacity of 80kg,
which is sufficient to lift up to 70 inch LCD & Plasma TVs on the market today.
The new TVL-2 Lift is equally suitable to be inverted, and thus ideal for ceiling
drop down applications.
The installation and set up of the system is extremely easy. Only four
screws are required to attach the lifting column to the cabinet wall panel/sub structure.
The electrical connections between all the main parts including Lift Column,
Control Box, Switch Box and IR receiver are plug types, which promote
easy installation.
Each TV Lift system is equipped
with an IR remote control, and corded handset. If the IR system fails, or is missing or lost, (IR handset)
the corded handset provides a backup to maintain operation of the lift.
The control box, with a built in micro-processor, provides the basic
operational functions of Up/Down/Store/Recall. The self-protection
feature continuously monitors the electrical current consumption of the
motor, and will abort the operation immediately if an abnormal rise in the
electrical current is detected.
The control box is CE and UL approved, and as such is compliant with all the necessary safety
requirements.
The accessories used to attach the LCD or Plasma TV to the lifting column are included, and
are very simple and easily adaptable so that most LCD & Plasma TVs can be used
with this TV Lift system.
The bottom and top heights of the lifting column can be modified, then memorized
electronically using the corded handsets set button. The top height of the lift can also be memorized
using the IR handset (M button)
webmaster@fijinetworks.com
TV
TVLift
LiftMechanism
MechanismDimensions
Dimensions
Model number
Retracted length
Stroke length
Mounting hole distance
Load
Speed full stroke
Model
number
Retracted
length
Stroke length
Mounting hole distance
Speed full stroke
TV
Lift
Mechanism
Dimensions
Model
Number
Retracted
Stroke
Mounting
hole
Load 25sec
Speed25sec
full
TVL-2
TVL-2
(Large
(Large
stroke)
stroke)
795mm
795mm
914mmlength
914mm
650mm
650mm 80kg
80kg
Length
distance
stroke
TVL-2 (Medium stroke)
693mm
780mm
542mm
80kg
21sec
TVL-2 (Large Stroke)
795 mm
914 mm
650mm
80kg
25sec
Control Box
IR Receiver
Mounting Bracket
TV Mounting Bracket
BRACKET LENGTH
B/L
TV-2 LARGE
30"
TV-2 MEDIUM
26"
Parts List.
Installation Instructions
Note: Most TVs come with their own Mounting screws already screwed into the back of the TV,
or loose in the TV Box. Use those screws instead where possible to ensure youm use the correct
screw size. The screws used in this Kit are M8 screws that may or may not fit your TV. In
addition you may need to open up the screw hole in part 8 using a drill to make the hole larger if
your TVs screws are larger than M8
Caution:
1. Do not plug into the mains until all the parts are connected.
2.Do not open the control box, otherwise an electrical hazard may occur.
3.Before operating be sure that there are no objects in the path of the TV lift, both above the TV
and below or damage to your TV and or the TV Lift may occur.
4.For safety reasons, before operation be sure there are not children or pets close to the TV lift.
To operate the TV lift once the lower and upper limits have been set, you simply press the up
button on the IR remote handset, and the TV LIFT will go the upper pre-set position. To make
the TV retract to the lower pre-set position simply press the down button on the IR remote
handset and the lift will retract, and automatically stop when it reaches the lower limit. You do
not need to hold the UP or DOWN (using the IR handset) buttons for normal movement
once the limits are set, just press the button once. (known as latch function)
NOTE.
The TVL-2 TV lifting column is designed for 10% usage. In other words if the lift is used
continuously for one minute, it is advised for the longevity of the appliance to refrain for further
usage for at least nine minutes.