Professional Documents
Culture Documents
Za Citat Dicotech
Za Citat Dicotech
Fire-stopping systems are used to prevent fire in a particular floor from spreading to other
floors. This is accomplished by sealing openings and joints through which fire could spread to
other floors. Basically, there are four types of openings / joints to which tested fire-stopping
systems are applied to prevent the spread of gasses, smoke and fire. These are:
DicoTech offers its expertise in installing effective fire-stopping systems in accordance with
the manufacturers instructions.
We can offer a full fledged system to suit various requirements which includes fire-rated
sealants, ablative
batts, fire-rated mortars, various board systems, collars, pipe wraps, expansion joints and
linear gap seals.
Passive Fire Protection Defined
Passive fire protection is used to compartmentalize and curtail fire. In doing so, it protects
structural stability, integrity and saves lives in case of fire. Fire-proofing and fire-stopping are
the two types of passive fire protection systems, and are complementary to each other..
cable trays. DicoTech offers its expertise in application of cable coatings in accordance with
the project specifications, industry standards, and manufacturers recommendations.
Cementitious Fire-proofing
This is the most popular and economic means of fire-proofing. It involves spraying lightweight cement-based material on structural steel members to a predetermined thickness
computed as per ASTM or BS standards. This method is normally used for members that are
concealed behind false ceilings or column encasements.
DicoTech is an approved applicator for various passive fire-protection systems that include
light-weight as well as high-density materials suitable for industrial and commercial
requirements.
The systems offered by DicoTech conform to the following international fire resistance
standards:
Intumescent Fire-proofing
This is commonly used where appearance matters most. Applied with airless spray equipment
by professionals as per UL/ASTM standards, intumescent fire-proofing offers a great deal in
terms of design freedom.
DicoTech offers expertise in the application of water-based intumescent paint systems that
enhance the beauty of exposed steel structures while providing fire resistant upto 120 minutes
as per BS 476 Part 21, upto 3 hours fire resistance as per ASTM E119, NFPA 251. The
materials used provide a durable and decorative finish that can also be top-coated to match
any aesthetic requirements.
Concrete Repairs
Reinforced concrete is robust and highly durable. However, it is sensitive to faults resulting
from design flaws, incorrect construction practices or both.
External influences such as attacks from chlorides and sulphates cause severe adverse effects
on reinforced concrete structures. These include corrosion of reinforcement and softening of
concrete. DicoTech provides its clients with complete package solutions to their concrete
related construction problems. This is achieved through careful diagnosis, definition of repair
methodology, suitable material specification and finally execution of the job. All operations of
DicoTech are supervised by professional people who have been in this field for over a decade
in the Middle East.
Crack Injection
Cracks in concrete structures usually signify more major problems and must not be ignored.
Cracks can cause subsoil water to leak into a faulty structure or storage water to leak out.
Furthermore, cracks can expose reinforcing steel to oxygen and moisture, hence making the
steel susceptible to corrosion. At DicoTech, these problems are tackled through the most
sophisticated systems of injection using state-of-the-art machines to completely fill the crack
either with epoxy or polyurethane resins.
2
Protective Coatings
Prevention is better than cure. A protective coating on a concrete structure will greatly
enhance its durability and resistance to degradation from adverse conditions, hence increasing
the lifespan significantly.
This is especially true in the salt-laden atmosphere of the Middle East. DicoTech can suggest
the right type of coating for any structure based on its exposure and intended usage; the
company is fully equipped to carry out the most effective kind of surface preparation using
sand/grit blasting equipment as well as high pressure water jetting machines. DicoTechs well
trained sprayers perform excellent application using modern airless spray machine.
Industrial Floorings
Industrial floors are often subjected to high temperature, abrasion and heavy loads, often
concentrated in very small areas. Lack of sufficient protection could result in severe damage
to these surfaces that would not only be expensive to repair, but would also disrupt work and
productivity.
DicoTech offers clients a variety of flooring systems to suit their needs based on the use and
nature of the anticipated traffic in the concerned area.
Car Park Coatings
Car park floors are liable to harm not only from high wear and tear but also from leakages
caused by cracks. Consequently, it is vital that these surfaces are protected through suitable
coatings.
DicoTech provides many type of coatings systems customized for different sections of the
structure such as ramps, driveways and roof car park decking which are exposed to UV
radiation.
DicoTech offers design and execution of the right protective lining systems for concrete or
steel substrates that need protection from concentrated chemicals such as sulphuric acid 99%,
sodium hydroxide 52% and other during storage or spillage conditions. The company offers
solutions for even the most adverse conditions.
Grouting
Proper installation of load-bearing units, underground pipes and various fixings requires voids
formed between the equipment and soil, or between load bearing units, to be thoroughly
sealed, ensuring structural stability.
Grouting is the injection of specially formulated cement, epoxy or other mixes into the
ground to improve its strength or reduce permeability. It is carried out by drilling holes into
the foundation to intercept open cracks, joints, fissures or cavities, then pumping the grouting
compound under pressure, hence sealing any voids.
DicoTech provides grouting solutions for:
Support of machinery, including but not limited to motors, pumps, turbines, generators
Water Proofing
In building construction, a structure needs waterproofing since concrete itself will not be
watertight on its own, unless its waterproofed with additives.
4
We understand that one of the major challenges for designers, engineers and construction
companies alike is to protect buildings from the damaging effects of water.
While waterproofing protection can be a relatively minor component of overall construction
costs, it is a vital ingredient to successful project completion and determines the building's
longevity.
Protecting our customer's buildings from the damaging effects of water is our primary focus.
Our aim
is to provide competitive, value for money solutions without cutting corners, or compromising
the technical integrity of the system.
DicoTech offers a diverse range of waterproofing systems backed up by professional service,
skilled staff, reputable suppliers and highly trained installers with the most up-to-date,
premium quality products available for:
Substructure Waterproofing:
PVC Membranes
Compartmentalized loosely laid system for both horizontal and vertical applications. The
PVC membrane and waterstops are fused by heat welding before concrete is cast, forming
compartments.
In case of any leakage, it is confined to a compartment and stopped by injecting resin through
easy accessible reinjectable hoses.
Proofex Engage
EPDM Membranes
Loosely laid or fully bonded system for both horizontal and vertical applications. The laps
come together either using adhesive or dual bond tapes to form a continuous watertight
membrane.
TPO Membranes
EPDM Membranes
SIKA
BASF
FOSROC
DCP
MAPEI
However, our application skills are not limited to the above manufacturers materials; we can
provide almost any waterproofing solution specified in any project.
HDPE Membrane Waterproofing Works:
Tank lining
Lake lining
DicoTechs Interiors & Fit-Out Division offers suspended ceilings and partition works
as well as turnkey fit-out for all types of general construction projects catering to the
requirements of brand owners, merchandised vendors, offices, hotels and building
owners / users.
Suspended Ceiling works:
6
DicoTech offers all type of suspended ceiling works suitable for residential towers,
hotel buildings, offices and industrial buildings. Suspended ceilings are designed to
cover MEP services passing below slab and to enhance acoustic performance while
providing an aesthetically pleasing decorative / architectural finish.
Gypsum Board Ceilings: Flat and Multilevel
Gypsum board ceilings consist of main channels, caring channels, hangers, perimeter
angles, fixed to gypsum board, taped, jointed and sanded to a smooth finish. Regular
gypsum boards are used for dry areas, moisture-resistance gypsum boards are used for
wet areas like toilets and pantries, and fire-rated gypsum boards are used as required
by specifications
Bulk Heads / Cove lights / Pelmets
Gypsum bulkheads and vertical portions of the suspended ceiling are formed to place
A/C grills, curtains, indirect lights, artificial beams and to achieve an architectural
finish. Gypsum bulkheads are formed at the termination point of the suspended
ceiling, consist of gypsum boards, furring channels and perimeter trims. They are
filled with a joint compound and then sanded to achieve a smooth final finish.
Tile ceilings 600 X 600mm
Tile ceilings are installed for architectural finish requirements and are widely used in
commercial and residential buildings. Tiled ceiling are suspended in an exposed T
grid system and triangular channel suspensions are used for concealed systems.
Tiled ceiling types include vinyl-faced gypsum tile ceilings, calcium silicate board
ceilings, GRG tile ceilings, metal tile ceiling, aluminum tile ceilings, mineral fiber tile
ceilings, acoustic tile ceilings, mirror finish tiles and micro perforated aluminum tiles.
Partition works
Gypsum board partitions are widely used in commercial and residential buildings,
industrial projects and offices. Gypsum board partitions are quick to install and
relocate, and can accommodate MEP services, while reducing load to the buildings.
Types of Partitions
Partition types include liner wall partitions, dry wall partitions for thicknesses of
75mm to 400mm with GI studs and tracks, fire-rated wall partitions, acoustic wall
partitions, staggered wall partitions, curved wall partitions and aqua panel wall
partitions.
These partitions are used for separation walls, internal walls, thermal wall insulations,
fire rated walls and acoustic-purpose walls.
Fit-out works
As an interiors company, DicoTech offers turnkey fit-out solutions including ceilings,
partitions, carpentry works, flooring and painting works for merchandised vendors
like. Completed retail projects include Tanagra, Faces in Mall of the Emirates, Dubai
and Sephora, Geox, LOccitane, Lacoste and Faces in Villaggio Mall, Doha.
The Interiors Team and work process
DicoTech has a highly dedicated, well-trained and experienced Interiors team for
architectural design and project management. Our core professionals are ably
supported by a well-selected workforce forming a tight knit community of skill and
talent providing customers the interior of their choice.
The core team of architects and interior designers first carry out site inspections to
study and determine the requirements of the customer. The deepest attention is paid to
the minute details in designing the layouts for the new spaces (offices, showrooms etc)
in close coordination with the customers consultants and architects.
7
It is only after each of these stages are thoroughly completed, approved and recorded
that our skilled carpentry team are brought in to complete the works per specifications,
designs and client schedule.