Professional Documents
Culture Documents
Ficha Tecnica Mangueras de Acople Hidraulico Dayco
Ficha Tecnica Mangueras de Acople Hidraulico Dayco
PART NUMBERING
How to Read Part Numbers
Hose Products
Hose Assembly Part Numbers
General Information
How to Read Part Numbers
M7
XX
HOSE STYLE
* CERTAIN HOSE STYLES VARY FROM THIS DEFINITION, SEE PAGE 21 FOR DETAILS.
HU 08
SERIES
08 MP
TERMINATION STYLE
HOSE SIZE
TERMINATION SIZE
General Information
Hose Products
Specifications:
Hose Identification:
All SAE hoses are branded with a line parallel to the
longitudinal axis as a visual aid to prevent installing hose
in a twisted position. As part of this line, the hose is
branded with the applicable SAE specification number,
and the size. All hoses will be branded with Dayco
Eastman part number and working pressure.
1/8
3/16
1/4
5/16
3/8
13/32
1/2
10
5/8
10
12
3/4
12
7/8
1
1 1/8
1 1/4
1 3/8
1 1/2
16
16
20
20
24
24
1 13/16
2
2 1/2
32
48
32
40
21
General Information
Hose Assembly Part Numbers
Dayco Eastman part numbers are a combination of the individual part numbers of the hose and the couplings used in
the assembly.
EXAMPLE:
An assembly using 1/2 ID hose (HFS208); coupled on one end with 3/4 - 16, 37 JIC swivel female
(HU08-08FJ); and on one end with 1/2 - 14, rigid male pipe NPTF dryseal thread (HU08-08MP); with an
overall length of 36.
EXAMPLE:
HFS208HU0808FJ08MP-36
HFS208
HU08
08FJ
08MP
- 36.00
Overall length of
assembly in inches.
When both couplings are the same, the coupling part number is not repeated to assure that an error is not made
during identification of assembly. Where spring guards are desired, the spring guard part number is inserted after
EXAMPLE:
HFS208HU0808FJ08MP-36 with 1712-95
the overall length of the assembly.
Measuring assembly lengths: Dayco Eastman measures assemblies in several different ways. Each assembly is
measured according to the type and angle of the coupling. Assemblies with straight couplings are measured from
extreme end to end.
L
225
For assemblies that have flanged couplings, the measurement is taken to the centerline of the sealing surface.
Bent tube ends and flange head couplings can be oriented at different angles to one another and must be specified
when ordering. Per the above illustration, the orientation angle is measured with the first coupling pointing downward
and looking at the assembly from the second coupling. The angle between the two is measured clockwise.
On assemblies that contain OFT style (O-ring face seal) couplings, the overall measurement is taken from flange end
to flange end. The measurement is taken with the nut pulled back to expose the flange end (see illustration below).
24