Professional Documents
Culture Documents
Standard Commands Used in
Standard Commands Used in
Standard Commands Used in
Geometrical line
Concentric circles
3 point circle
Tangent circle
Eclipse
Simple arc
Concentric arc
3 tangent arc
Conic arc
Circular
Elliptical
6. Spline command:-Creates spline curve of desired shape. Its flexibility is more that is, we
can change its shape from any point.
7. Point command:-It creates point on the sketch wherever we want.
8. Offset command:-It is used to take offset of any line,
loop or chain at any distance in any transverse direction.
9. Use command:-It is a command used to select a boundary
outline and we can extrude that surface to any length of
height and it also helps to cut that particular surface to any
required depth.
10. Modify command:-It is used to modifying all the
dimensions.
11. Constraints:-It is used to make a few useful changes in
the distorted geometry. It has 9 options further.
a) Make a line vertical
b) Make a line horizontal
c) Make two entities perpendicular
d) Make two entities tangent
e) Show midpoint of a line
f) Make circle concentric
g) Make sketch symmetric about centre axis
h) Make two entities parallel
i) Make two entities of equal length
12. Text:-It helps us to write anything. Its orientation depends on the type of line we draw. It
is basically used to write texts over the drawn parts.
14. Corner command:-It is used to extend line or met the corners of two lies.
15. Divide command:-It divides any line, circle or any object in as many parts as we want to
draw over the surface.
16. Mirror command:-It is used make mirror image of any object, line or surface about a
line or plane. It is a main 3D command used to draw objects with similar structure on right
left or up down.
17. Hole:-It is used to cut a hole in a solid. It could be a standard hole or hole of any diameter
as we want.
18. Shell:-It is used to make hollow section having given thickness as specified by the user.
19. Round:-It is used round the edges of the object to any radius as we want ut not more than
the width of the object.
20. Auto round:- This is used when an object has a number of edges and we cannot select all
of them to round them then this command is used and all we need to do is to specify the
radius and then all the edges will be round at given radius.
21. Sweep:-It is used to sweep any section along a trajectory.
22. Cut:-It is used to cut the required shape from any object that cut may be through cut or up
to some given depth.
23. Extrude:-Simple but one of the main 3D command used on surfaces to make them have
definite height.
24. Revolve:-The objects which are symmetric about an axis can be drawn by this command.
It is necessary to draw a centre axis about which the object has to revolve.
25. Rib:-It is used as a support between two surfaces which are weak structure wise.
Basically it is of two types:a) Triangular
b) Rectangular
26. Helical Sweep:-It is mainly used to draw springs and threads. User just need to define
some values such as pitch, radius of thread or spring, section of thread or spring that is it may
be circular or rectangular.
ABOUT CENTRE
Pro-E
COMPLETED AT
Bachelors of Technology
in
Mechanical Engineering
Submitted by:
Dilkaran Singh
3ME5
11203167
CONTENTS
1. Acknowledgement
2. About Centre
3. Foundation of Pro/E
4. Overview
5. Pro/E Functionality
6. Pro/E Interface
7. Pro/E Part Design Basics
8. Pro/E Menu System
9. Standard Commands Used in Pro/E
10.Modelling With Pro/E
11.Creating Assembly
Acknowledgement
The training opportunity I had HI TECH POINT TECHNOLOGIES was a great
chance for learning and developing the thorough knowledge of Pro/E.
Therefore, I consider myself as a very lucky individual as I was provided with
an opportunity to be a part of it. I am also grateful for having a chance to meet
so many wonderful people and professionals who led me though this internship
period.
Bearing in mind previous I am using this opportunity to express my deepest
gratitude and special thanks to the MD of HI TECH POINT TECHNOLOGIES
who in spite of being extraordinarily busy with her/his duties, took time out to
hear, guide and keep me on the correct path and allowing me to carry out my
project at their esteemed organization and extending during the training.
I express my deepest thanks to Mr. Akash Kumar, for taking part in useful
decision & giving necessary advices and guidance and arranged all facilities to
make life easier. I choose this moment to acknowledge his/her contribution
gratefully.
I perceive as this opportunity as a big milestone in my career development. I
will strive to use gained skills and knowledge in the best possible way, and I
will continue to work on their improvement, in order to attain desired career
objectives.