Professional Documents
Culture Documents
The Basic Eog Measurment of Clinical EOG Standard Measurement Method
The Basic Eog Measurment of Clinical EOG Standard Measurement Method
MEASURMENT OF CLINICAL
EOG
The calibration of the signal may be achieved by having the patient look
consecutively at two different fixation points located a known angle apart and
recording the concomitant EOGs .
By attaching skin electrodes on both sides of an eye the potential can be
measured by having the subject move his or her eyes horizontally a set
distance .
Typical signal magnitudes range from 5-20 V/.
STANDARD
MEASUREMENT
METHOD
After training the patient in the eye
movements, the lights are turned off.
About every minute a sample of eye
movement is taken as the patient is
asked to look back and forth
between the two lights .
Some laboratories have the patients
move their eyes the entire testing
period.
After 15 minutes the lights are
turned on and the patient is again
asked about once a minute to move
his or her eyes back and forth for
about 10 seconds.
Designed By :