Professional Documents
Culture Documents
GSM Handover Command
GSM Handover Command
GSM Handover Command
18
9.1.15
Handover command
This message is sent on the main DCCH by the network to the mobile station to change the dedicated channel configuration, timing adjustm
Message type:
HANDOVER COMMAND
Significance:
dual
Direction:
network to mobile station
Table 9.1.15.1/3GPP TS 04.18: HANDOVER COMMAND message content
IEI
Information element
RR management Protocol
Discriminator
Skip Indicator
Handover Command
Message Type
Cell Description
Description of the first
channel, after time
Handover Reference
Power Command and
Access type
D-
Synchronization Indication
62
10
63
11
13
14
15
16
17
Type / Reference
Protocol Discriminator
10.2
Skip Indicator
10.3.1
Message Type
10.4
Presence
M
Format
V
M
Cell description
10.5.2.2
M
Channel Description 2
10.5.2.5a
M
Handover Reference
10.5.2.15
Power Command and Access typeM
10.5.2.28a
Synchronization Indication
V
V
V
TV
TV
TLV
TV
TLV
TV
TV
TV
TV
TV
TV
TV
10.5.2.39
Frequency Short List
10.5.2.14
Frequency List
10.5.2.13
Cell Channel Description
10.5.2.1b
Multislot Allocation
10.5.2.21b
Channel Mode
10.5.2.6
Channel Mode
10.5.2.6
Channel Mode
10.5.2.6
Channel Mode
10.5.2.6
Channel Mode
10.5.2.6
Channel Mode
10.5.2.6
Channel Mode
17
18
64
66
69
Frequency Channel
Sequence, after time
72
7C
7B
7D
12
19
1C
1D
1E
10.5.2.6
Channel Mode
10.5.2.6
Channel Description
10.5.2.5
Channel Mode 2
10.5.2.7
Frequency Channel
Sequence
10.5.2.12
Mobile Allocation, after time Mobile Allocation
10.5.2.21
Starting Time
Starting Time
10.5.2.38
Real Time Difference
Time Difference
10.5.2.41
Timing Advance
Timing Advance
10.5.2.40
Frequency Short List,
Frequency Short List
before time
10.5.2.14
Frequency List, before time Frequency List
10.5.2.13
Description of the First
Channel Description 2
Channel, before time
10.5.2.5a
Description of the Second Channel Description
Channel, before time
10.5.2.5
Frequency channel
Frequency channel
sequence before time
sequence
21
9-
Multi-Rate configuration
TV
TV
TV
TV
TV
TLV
TV
TLV
TV
TV
TLV
TV
TV
TV
10.5.2.12
Mobile Allocation
10.5.2.21
Cipher Mode Setting
10.5.2.9
VGCS target mode
Indication
TLV
TV
TLV
10.5.2.42a
MultiRate configuration
10.5.2.21aa
TLV
length
1-Feb
1-Feb
1
2
3
1
1
10
4-131
17
3-12
2
2
2
2
2
2
2
2
2
4
2
10
3-Oct
3
3
2
10
4-131
4
4
10
3-Oct
1
3
4-8
10.5.2.39
Synchro
The purpose of Synchronization Indication information element is to indicate which type of handover is to be performed.
The Synchronization Indication information element is coded as shown in Figure 10.5.2.39.1/3GPP TS 04.18 and Table 10.5.2.39.1/3GPP T
The Synchronization Indication is a type 1 information element.
8
7
Synch. Indic. IEI
Non-synchronized
0 1
Synchronized
1 0
Pre-synchronised
1 1
Pseudo-synchronised
Synchronization Indication
4
NCI
3
ROT
1
SI
octet 1
10.5.2.28a
The purpose of the Power Command and access type information element is to provide the power level to be used by the mobile station and
The Power Command and access type information element is coded as shown in Figure 10.5.2.28a.1/3GPP TS 04.18 and Table 10.5.2.28a.1
The Power Command and access type is a type 3 information element with 2 octets length.
8
ATC
Figure 10.5.2.28a.1/3GPP TS 04.18: Power Command and access type information element
Table 10.5.2.28a.1/3GPP TS 04.18: Power Command and access type information element
ATC (Access Type Control)
(octet 2)
bit 8
0
FPC in use
power
level
field
is
o be used by the mobile station and the indication that the mobile station can avoid the transmission of handover access.
PP TS 04.18 and Table 10.5.2.28a.1/3GPP TS 04.18.
7
0
spare
FPC
5
4
3
Power Command and Access Type IEI
POWER LEVEL
1
octet 1
octet 2
10.5.2.2
Cell Descript
The purpose of the Cell Description information element is to provide a minimum description of a cell, e.g. to allow the mobile station to us
The Cell Description information element is coded as shown in Figure 10.5.2.2.1/3GPP TS 04.18 and Table 10.5.2.2.1/3GPP TS 04.18.
The Cell Description is a type 3 information element with 3 octets length.
8
7
Cell
BCCH ARFCN
(high part)
BCCH ARFCN (low part)
NCC
field
representation
is
of
coded
as
the
binary
BCC
field
representation
of
is
coded
as
the
the
BS colour code
binary
BCCH
binary
ARFCN
number
representation
field
of
is coded as the
the
BCCH
carriers
Cell Description
e.g. to allow the mobile station to use its pre-knowledge about synchronization.
able 10.5.2.2.1/3GPP TS 04.18.
part)
5
4
3
Cell Channel Description IEI
NCC
2
BCC
1
octet 1
octet 2
octet 3
10.5.2.15
The purpose of the Handover Reference information element is to provide a handover reference value used for access identification.
The Handover Reference information element is coded as shown in Figure 10.5.2.15.1/3GPP TS 04.18 and Table 10.5.2.15.1/3GPP TS 04.1
The Handover Reference is a type 3 information element with 2 octets length.
8
Handover reference value
handover
reference
binary representation.
Range: 0 to 255.
Handover Reference
rence value
5
4
3
Handover Reference IEI
1
octet 1
octet 2
10.5.2.5a
Channel Description 2
The purpose of the Channel Description 2 information element is to provide a description of an allocable channel configuration together wi
The Channel Description 2 information element is coded as shown in figure 10.5.2.5a.1/3GPP TS 04.18 and Table 10.5.2.5a.1/3GPP TS 04.
The Channel Description 2 is a type 3 information element with 4 octets length.
8
5
Channel Description IEI
Channel type
and TDMA offset
H=1->
--- H ---
TSC
H=0->
MAIO
(low part)
HSN
ARFCN (low part)
0 0 0 0 1
0 0 0 1 T
TCH/H + ACCHs
0 0 1 T T
0 1 T T T
The
binary.
In the description below "n" is the timeslot number
indicated by TN. The description is valid only if
all the indicated timeslot numbers are in the range
0 to 7.
1 0 X X X
X X X:
0 0 0
no additional timeslots
0 0 1
at timeslot n-1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
1 1 0 0 1
to
1 1 0 1 1
1 1 0 0 1
at timeslot n-1
1 1 0 1 0
1 1 0 1 1
1 1 1 1 0
Range: 0 to 7.
TSC, Training Sequence Code (octet 3)
The TSC field is coded as the binary representation
of the Training Sequence code as defined in 3GPP TS 05.03
Range: 0 to 7.
H, Hopping channel (octet 3)
Bit
5
0
Single RF channel
RF hopping channel
Note: The
value
channel
selector
field
Spare
nnel Description 2
TN
MAIO (high part)
----------------------------------------------------ARFCN
0
spare
(high part)
HSN
octet 1
octet 2
octet 3
octet 4