Professional Documents
Culture Documents
701 - Ceragon - IP10-Licensing - PDF v1.0
701 - Ceragon - IP10-Licensing - PDF v1.0
701 - Ceragon - IP10-Licensing - PDF v1.0
License
Management
Guide
Notice
This document contains information that is proprietary to Ceragon Networks Ltd.
No part of this publication may be reproduced, modified, or distributed without prior written
authorization of Ceragon Networks Ltd.
This document is provided as is, without warranty of any kind.
Registered TradeMarks
Ceragon Networks is a registered trademark of Ceragon Networks Ltd.
FibeAir is a registered trademark of Ceragon Networks Ltd.
CeraView is a registered trademark of Ceragon Networks Ltd.
Other names mentioned in this publication are owned by their respective holders.
TradeMarks
CeraMapTM, PolyViewTM, EncryptAirTM, ConfigAirTM, CeraMonTM, EtherAirTM, and MicroWave
FiberTM, are trademarks of Ceragon Networks Ltd.
Other names mentioned in this publication are owned by their respective holders.
Statement of Conditions
The information contained in this document is subject to change without notice.
Ceragon Networks Ltd. shall not be liable for errors contained herein or for incidental or
consequential damage in connection with the furnishing, performance, or use of this
document or equipment supplied with it.
Information to User
Any changes or modifications of equipment not expressly approved by the manufacturer
could void the users authority to operate the equipment and the warranty for such equipment.
Copyright 2008 by Ceragon Networks Ltd. All rights reserved.
Corporate Headquarters:
Ceragon Networks Ltd.
24 Raoul Wallenberg St.
Tel Aviv 69719, Israel
Tel: 972-3-645-5733
Fax: 972-3-645-5499
Email: info@ceragon.com
North American Headquarters:
Ceragon Networks Inc.
10 Forest Avenue,
Paramus, NJ 07652, USA
Tel: 1-201-845-6955
Toll Free: 1-877-FIBEAIR
Fax: 1-201-845-5665
Email: infous@ceragon.com
www.ceragon.com
European Headquarters:
Ceragon Networks (UK) Ltd.
4 Oak Tree Park, Burnt Meadow Road
North Moons Moat, Redditch,
Worcestershire B98 9NZ, UK
Tel: 44-(0)-1527-591900
Fax: 44-(0)-1527-591903
Email: infoeuro@ceragon.com
APAC Headquarters
Ceragon Networks (HK) Ltd.
Singapore RO
Level 34 Centennial Tower
3 Temasek Avenue
Singapore 039190
Tel - + 65 6549 7886
Fax: +65 6549 7011
Contents
General .......................................................................................................... 1
Settings ............................................................................................................... 23
General
This guide explains how to work with the FibeAir IP-10 web based License Management System.
The system enables authorised users to obtain license-related information and perform license-related
operations.
Getting Started
To start the management application:
1.
2.
To log in to the system, enter your user name and password, and then click Login.
Note the following user name rules:
For Demo OEM, the first five digits must be 00001. The next four digits after the first five should
be numbered starting with 0001 for end users. For example, the number 000010001 would mean
that Demo OEM end user 0001 is entering the system.
For users other than Demo OEM, the user name must start with 00000. For example, the number
000000001 would mean that non-Demo OEM user 0001 is entering the system.
For OEM Users
3a. If you enter as an OEM user, the following web page appears:
End users that belong to that channel cannot see devices or licenses that belong to the OEM or other
customers.
After you select the operating mode, the following web page appears:
From within an item web page, you do not have to return to the main web page. Instead, use the tabs at the
top (Devices, Licenses, etc.) to obtain a list of items for the particluar group.
Note that in any web page, you can click Print
Note that for OEM users, the Generate Keys button is replaced with Assign to Customer
.
The list includes all the devices you purchased from Ceragon.
Click Device ID for a more deatiled description of the device.
In this page, you can assign the current ID to an end user, using the drop-down list in the Assign to
Customer field.
Select the criteria (filters) you want for the search, and then click Search.
To clear the criteria you selected, click Clear.
Import Devices
In the toolbar, click Import
You will be prompted to locate the file with the device list. Once you locate and select the file, click Import.
The device list file must be a text file with the following columns:
Device ID Customer
Country
Region /
Network
Link
Side
To delete a device, select the device in the list, and click Delete
Exporting a Device List
To export a device list to a file, click Export
The list will be saved in an Excel file with the extension csv (Comma Separated Values).
Generating Keys
To generate license keys for one or more devices, select the devices in the main list by marking the
checkboxes beside them, and click Generate Keys
In this web page, only the devices you selected will appear.
10
The All Relevant Licenses area shows only the licenses that are common to all devices you selected
(meaning their lowest common denominator).
The current license types include the following:
1 = ACM
2 = Networking
3 = Capacity Upgrade
The following tables list the current license possibilities:
Capacity Upgrade
License
Type
Value
IP10-CAP-010
Feature disabled
IP10-CAP-025
IP10-CAP-050
IP10-CAP-100
IP10-CAP-150
IP10-CAP-200
IP10-CAP-300
IP10-CAP-400
IP10-UPG-025-050
IP10-UPG-025-100
10
IP10-UPG-025-150
11
IP10-UPG-025-200
12
IP10-UPG-025-300
13
IP10-UPG-025-400
14
IP10-UPG-050-100
15
IP10-UPG-050-150
16
IP10-UPG-050-200
17
IP10-UPG-050-300
18
IP10-UPG-050-400
19
IP10-UPG-100-150
20
IP10-UPG-100-200
21
IP10-UPG-100-300
22
IP10-UPG-100-400
23
IP10-UPG-150-200
24
IP10-UPG-150-300
25
IP10-UPG-150-400
26
IP10-UPG-200-300
27
IP10-UPG-200-400
28
IP10-UPG-300-400
Description
Name in License
Management Site
11
ACM
License
Type
Value
Name in License
Managament Site
Description
Feature disabled
IP10-ACM
ACM
Value
Name in License
Management Site
Description
Feature disabled
IP10-Metro
Metro Switch
To add a license for which you want to generate a key, select the license in the All Relevant Licenses area
and click Add to add it to the Selected Licenses area.
Important! You can only select one license from each category (ACM, Networking, Capacity Upgrade). If
you select a capacity upgrade license and want to add a different capacity upgrade license, you must first
remove the first capacity upgrade license and then add the other one.
Once you select the licenses you want, click Generate Keys.
After you confirm your selection, the following example web page appears.
12
In the Select Customer field, use the drop-down list to choose the customer you want to assign the devices
to.
Click Show Available Devices for a list of devices you can choose from.
In the available list of devices, click Filter & Sort to customize the device list, as shown in the following
example page.
13
You can specify the ID of the device you want to include in the list, and select the list sort order (ascending
or descending).
After you click Go to generate the list, in the Available Devices list, select the devices you want to assign to
the user, and click Add to add them to the Assigned Devices list.
When you complete the operation, click Save.
In the confirmation page, click Confirm.
The following example page appears:
14
15
The web page displays all the licenses you currently own.
To search for a particular license, click Search, specify the criteria you want, and click Search again.
Click the number in the Qty Assigned column for a list of licenses assigned to customers.
16
Click the number in the Qty Generated column for a list of licenses used to generate keys.
17
To generate license keys, select Generate Keys in the Licenses group in the main web page, or click
Generate Keys in the web page that appears when you click the Licenses tab.
To add a license for which you want to generate a key, select the license in the All Available Licenses area
and click Add to add it to the Selected Licenses area.
Click Show Relevant Devices for a list of devices associated with the licenses you chose.
18
To add a device for which you want to generate a key, select the device in the All Available Devices area
and click Add to add it to the Selected Devices area.
Once you select the devices you want, click Generate Keys.
The keys will be generated, as shown in the following example page, and the database will be updated.
19
20
In the Select Customer field, use the drop-down list to choose the customer you want to assign the licenses
to.
Click Show Available Licenses for a list of licenses you can choose from.
21
In the Filter by Type field, click the drop-down list and choose the license type (Capacity, ACM,
Networking).
For License Code, click the drop-down list and choose the license specifications.
For Quantity to Assign, enter the amount of licenses you want to assign to that customer. The maximum
quantity is limited to the available quantity for the license you choose.
After you complete the filter options, click Add to add the licenses to the Assigned Licenses list. You can
repeat this procedure more than once to add other license types.
For Quantity to Return, enter the amount of unused licenses you would like to return (if relevant).
Click Save to save the license assigment information in the database.
In the page that appears, click Confirm to confirm the assignment.
A page will appear informing you that the operation was successful, and the main license list will be updated
with the information.
22
Settings
In the main web page, the Settings group includes items you can select for system information and
configuration.
Managing Users
Select the Manage Users item to define users and modify their properties. You can also access this item by
clicking the Settings tab at the top of the page (if it appears).
23
In this page, enter the information in the fields, and then click Save.
To delete one or more users, in the user list, mark the checkboxes beside the users you want to delete, and
click Delete
. Confirm your choice(s) in the page that appears and the users will be deleted.
24
Generating Reports
In the main web page, you can select a report to generate: an Orders report, or a Devices and Activations
report.
To generate a report, select Orders Report or Devices & Activations Report in the main web page, or click
the Reports tab at the top of the page (if it appears).
25
26