Professional Documents
Culture Documents
Cable Cleat Catalogue 2014
Cable Cleat Catalogue 2014
APPLICATION
SELECTION RANGE:
CABLE
ARRANGEMENT
VULCAN
COLOSSUS
Page 2
Page 4
Page 5
Page 13
Page 13
TREFOIL
SINGLE or
MULTICORE
QUAD
TRIPLEX
EMPEROR
BUNDLED
Keith Toose
Managing Director
FIRE RATED
Contact us at:
Phone: 1300 556 601
or
visit us at
www.ipdgroup.com.au
QR Code
Scan the code above with
a smartphone to view our
full Cable Cleat range.
Email: customerservice@ipdgroup.com.au
ALPHA
VARI-CLEAT
FLEXISTRAP
1 or 2 HOLE
POLYMERIC
1 or 2 HOLE
ALUMINIUM
CENTAUR HIGH
VOLTAGE
PHOENIX
FIRE RATED
Page 7
Page 8
Page 6
Page 10
Page 11
Page 12
Page 14
Page 13
Applications:
- Trefoil and single cable arrangements.
- Safely restrain cables in event of a short circuit.
Features:
- 2mm thick 316L marine grade stainless steel frame.
- Tested to 235kA peak @ 0.1sec.
- With integrated LSF zero halogen polymeric liner &
base pad.
- Range taking.
- Withstand harshest environmental conditions.
- Cleat depth 54mm.
www.ipdgroup.com.au
INSULATION PLATE
Applications:
- As a barrier where galvanic reaction may occur between dissimilar metals,
e.g. when installing stainless steel cleats onto galvanised steel channel.
Features:
- Manufactured as standard in LSF zero halogen polymer.
Approx.
Part No.
L
W
Mounting Pack
Weight
mm mm
Hole
Qty
g
EP91-1P 54 36 M10 100 5
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 3
Applications:
- Trefoil, single, quad and bundle cable arrangements.
- Safely restrain cables in event of a short circuit.
Features:
- 1mm thick 316L marine grade stainless steel frame.
- Tested to 132kA peak @ 0.1sec.
- With integrated LSF zero halogen polymeric liner &
base pad.
- Range taking.
- Withstand harshest environmental conditions.
- Compact design.
- Cleat depth 54mm.
www.ipdgroup.com.au
Applications:
- Trefoil cable arrangements
- Safely restrain cables in event of moderate level of short circuit.
Features:
- Unique hybrid design incorporating a Low Smoke and Fume Zero
Halogen polymer frame and the strength of 316L stainless steel
skeleton.
- Tested to 104kA peak @ 0.1sec.
- Range taking capable to suit trefoil cables up to 170mm OD each.
- With the depth increasing within the range, if offers better support to
large cable sizes.
- The polymer frame provides protection to the cables during short circuit conditions.
SPECIAL FEATURE
Colossus can be turned into a saddled cable cleat by adding two wings on both sides of the cleat. This further increase
the depth, offering added protection to larger cable sizes from 69mm to 170mm outside diameters.
This is a special, non-standard product manufactured to orders for project and quantity requirements.
Contact your local IPD Branch or Customer Service at 1300 556 601 for details.
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 5
Applications:
- Trefoil cable arrangements.
- Safely restrain cables in event of a short circuit.
- For use with Ellis ranges of trefoil cleats. Then the trefoil cleats
can be spaced more widely than normal.
Trefoil Cable
Part No.
Part No.
Range Weights
STANDARD DUTY HEAVY DUTY
Min O/D Max O/D
g
(SD)
(HD)
mm
mm
(SD) (HD)
EPFS24-34SDL
EPFS24-34HDL
24
34
131 165
EPFS30-41SDL
EPFS30-41HDL
30
41
144 185
EPFS37-47SDL
EPFS37-47HDL
37
47
155 202
EPFS43-54SDL
EPFS43-54HDL
43
54
168 221
EPFS50-60SDL
EPFS50-60HDL
50
60
180 238
EPFS56-67SDL
EPFS56-67HDL
56
67
193 258
EPFS63-73SDL EPFS63-73HDL
63
73
204 275
EPFS69-80SDL
EPFS69-80HDL
69
80
217 294
EPFS72-85SDL
EPFS72-85HDL
72
85
226 308
EPFS82-95SDL
EPFS82-95HDL
82
95
245 336
EPFS92-105SDL EPFS92-105HDL
92 105
264 364
EPSF102-115SDL EPFS102-115HDL 102 115
282 392
EPSF112-125SDL EPFS112-125HDL
112 125
301 420
EPSF122-135SDL EPFS122-135HDL
122 135
319 448
EPSF132-145SDL EPSF132-145HDL
132 145
338 476
EPFS-T001-4
EPFS-T001-4 SPECIAL DRIVE SOCKET
www.ipdgroup.com.au
Applications:
- Trefoil cable arrangement.
- Safely restrain cables in event of a short circuit.
Features:
- Manufactured in extruded aluminium (6000 series) to BS EN 755.
- Tested to 96kA peak @ 0.1 sec.
- Zinc plated steel closing bolts.
- One bolt fixing.
- Where galvanic corrosion is an issue, the cleat can be supplied with
alternative low smoke zero halogen base.
- Cleat depth D.
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 7
VARI-CLEAT
Applications:
- Trefoil, single and bundle cable arrangements.
- Safely restrain cables in event of a short circuit.
Features:
- Tested to 101kA peak @ 0.1 sec.
- Compact design.
- Base is cast aluminium.
- Over-strap is 316L stainless steel with LSF liner.
Mounting
Holes
2 x M8
2 x M8
2 x M8
2 x M8
2 x M8
2 x M8
2 x M8
2 x M8
2 x M8
2 x M8
2 x M8
2 x M8
2 x M8 + 1 x M10
2 x M8 + 1 x M10
2 x M8 + 1 x M10
2 x M8 + 1 x M10
2 x M8 + 1 x M10
2 x M8 + 1 x M10
2 x M8 + 1 x M10
2 x M8 + 1 x M10
3 x M12
3 x M12
3 x M12
3 x M12
3 x M12
3 x M12
3 x M12
3 x M12
3 x M12
3 x M12
3 x M12
3 x M12
www.ipdgroup.com.au
VARI-CLEAT
BASE SIZE AN TO CN
BASE SIZE DN TO HN
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 9
Applications:
- Fix, retain and support single cable.
Features:
- New design to enable framing channel fixing.
- 2F tested to 77.6kA @ 0.1sec when used in
conjunction with SFT on triplex cable.
- Available in black polypropylene (B) or black
flame retardant zero halogen phosphorus
free nylon (LSF).
- Supplied in pairs.
Single Cable
Dimensions Mounting
Approx.
Range O/D
W
H
D
E
Hole
Pack Weight (g)
mm
mm mm
mm
mm
mm
Qty
B LSF
10-13
37.8
27
41.4
10.2
10
100 14.6 19.6
13-16
41.2
30
41.4
10.4
10
100 17.0 23.0
16-19
44.3
33
41.4
10.7
10
100 19.6 26.4
19-23
48.2
36
41.4
10.9
10
100 22.4 30.2
23-27
52.2
40
41.4
11.3
10
100 25.8 34.6
27-32
57.1
44
41.4
11.6
10
100 29.2 39.0
32-38
63.1
49
41.4
12.1
10
100 34.2 46.2
38-46
71.3
58
41.4
12.9
10
50
47.8 64.0
46-51
77.3
67
41.4
13.5
10
50
54.0 73.2
51-57
83.2
72
41.4
13.9
10
50
59.0 80.4
www.ipdgroup.com.au
Applications:
- Fix, retain and support single cable.
Features:
- New design no enable framing channel fixing.
- Made of cast aluminium alloy for installation in operating temperature application of -40C to +150C.
- Available as standard in plain LM6 aluminium to BS 1490:1988 for dry industrial use or outdoor unpolluted areas.
- Can be epoxy coated for use in harsh environment, such as sea air conditions.
- Supplied in pairs.
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 11
Applications:
- Designed for cleating large diameter HV cables typically
220kV to 400kV in cable tunnels in transmission system.
Features:
- Suitable for supporting single cables with outside diameter
100mm to 162mm.
- Tested at 163kA peak for 0.1 sec at KEMA in Arnhem Holland.
- Successfully tested for corrosion resistance in accordance
with BS EN 9227:2006 Salt Spray Tests.
- A full range of intermediate spacers is also available.
SELECTION TABLE
Part No.
Single Cable
Length of
Range O/D mm
Cable Saddle
EPCS100-112/400 100-112
EPCS108-122/400 108-122
EPCS120-132/400 120-132
400mm
400mm
EPCS128-142/400 128-142
EPCS140-152/400 140-152
EPCS148-162/400 148-162
EPCS100-112/600 100-112
EPCS108-122/600 108-122
EPCS120-132/600 120-132
600mm
600mm
EPCS128-142/600 128-142
EPCS140-152/600 140-152
EPCS148-162/600 148-162
EPCS100-112/800 100-112
EPCS108-122/800 108-122
EPCS120-132/800 120-132
800mm
800mm
EPCS128-142/800 128-142
EPCS140-152/800 140-152
EPCS148-162/800 148-162
www.ipdgroup.com.au
Applications:
- Wrap around triplex cable to overcome the twist in the cable to allow cleating at any
point along the length.
Features:
- Made of LSF zero halogen polymeric material.
- Tested to 76kA @ 0.1sec when used in conjunction with 2F cable cleats.
- Fit in single cable cleat types such Emperor Single, Vulcan+, 2F or 2A cable cleats.
SELECTION TABLE
Individual Fit in Single Cable Cleat Type
Part No.
Cable Core
SFT Outside
2F Plastic
O/D
Diameter
Emperor
Clamp
mm
mm
Vulcan+
Single
B or LSF
EPSFT31
28
66
EPVRT-04
EPES65-73
EP2F-11
EPSFT31
29
68
EPVRT-04
EPES65-73
EP2F-11
EPSFT31
30
70
EPVRT-05
EPES65-73
EP2F-11
EPSFT31
31
72
EPVRT-05
EPES65-73
EP2F-1200
EPSFT31
32
73.5
EPVRT-05
EPES73-85
EP2F-1200
EPSFT31
33
75
EPVRT-06
EPES73-85
EP2F-1200
EPSFT31
34
77
EPVRT-06
EPES73-85
EP2F-1201
EPSFT36
33
77
EPVRT-07
EPES73-85
EP2F-1201
EPSFT36
34
79
EPVRT-07
EPES73-85
EP2F-1201
EPSFT36
35
80
EPVRT-07
EPES73-85
EP2F-1201
EPSFT36
36
83
EPVRT-07
EPES73-85
EP2F-1201
EPSFT36
37
85
EPVRT-07
EPES84-94
EP2F-1202
EPSFT36
38
86
EPVRT-07
EPES84-94
EP2F-1202
EPSFT36
39
87
EPVRT-07
EPES84-94
EP2F-1202
EPSFT43
39
92
EPVRT-08
EPES84-94
EP2F-131
EPSFT43
40
94
EPVRT-08
EPES94-118
EP2F-131
EPSFT43
41
96
EPVRT-08
EPES94-118
EP2F-131
EPSFT43
42
98
EPVRT-09
EPES94-118
EP2F-132
EPSFT43
43
100
EPVRT-09
EPES94-118
EP2F-132
EPSFT43
44
101
EPVRT-09
EPES94-118
EP2F-132
EPSFT43
45
103
EPVRT-10
EPES94-118
EP2F-132
EPSFT43
46
104.5
EPVRT-10
EPES94-118
EP2F-132
EPSFT43
47
106
EPVRT-10
EPES94-118
EP2F-141
EPSFT51
47
107
EPVRT-12
EPES94-118
EP2F-141
EPSFT51
48
109
EPVRT-12
EPES94-118
EP2F-141
EPSFT51
49
111
EPVRT-12
EPES94-118
EP2F-141
EPSFT51
50
113.5
EPVRT-12
EPES94-118
EP2F-142
EPSFT51
51
115.5
EPVRT-12
EPES94-118
EP2F-142
EPSFT51
52
118
EPVRT-12
EPES94-118
EP2F-142
EPSFT51
53
120
EPVRT-12
EPES118-130
EP2F-142
EPSFT51
54
122.5
EPVRT-12
EPES118-130
EP2F-151
EPSFT51
55
125
EPVRT-12
EPES118-130
EP2F-151
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 13
Applications:
- Support fire-rated cables in event of a fire.
Features:
- Successfully tested for fire resistance in accordance with BS8491:2008 and
BS 5839-1:2002, Section 26.2d.
- Successfully tested to 60kA peak @ 0.1 sec to IEC 61914:2009.
- Manufactured from 316L marine grade stainless steel.
- Fireproof, corrosion resistant and easy to fit.
- Supplied in pairs.
SELECTION TABLE
Single Cable
Range Dimensions
Approx
Part No.
Min O/D Max O/D
W
H
weight
mm
mm
mm
mm
g
EP1FP-10SS 10 13 40 21 91
EP1FP-11SS 13 16 44 24 106
EP1FP-12SS 16 19 47 27 113
EP1FP-13SS 19 23 51 31 125
EP1FP-14SS 23 27 55 35 139
EP1FP-15SS 27 32 60 40 153
EP1FP-16SS 32 38 66 46 174
EP1FP-17SS 38 46 74 54 201
EP1FP-18SS 46 51 80 59 225
EP1FP-19SS 51 57 85 64 242
EP1FP-20SS 57 65 93 73 265
www.ipdgroup.com.au
Applications:
- Single or bundle cable arrangements.
Features:
- Easy to install, screw fix to wall or tray.
- Fully releasable strap, allowing ease of re-installation.
- Range taking.
- Available in black polypropylene (B) (-40C to 85C) or black flame retardant zero
halogen phosphorus free nylon (LSF) (-40C to 150C).
SELECTION TABLE
Single Cable Dimensions Approx.
Part No. Range Mounting weight
Min O/D Max O/D
H
D W(max) Hole
Pack g
mm
mm
mm mm mm
mm
Qty
B LSF
EP15-1BP
9.5 16.0
37.0 25.0 27.0
6.0
100 6.0 8
EP15-2BP 15.0 25.0
37.0 32.0 36.0
6.0
50
8.0 10.9
EP15-3BP 23.0 37.0
48.0 36.0 48.0
6.0
50 15.0 18.1
EP15-4BP 34.0 52.0
65.0 40.0 63.0
6.0
25 20.0 25.5
- Part Numbers shown in above are made of black polypropylene (B) material.
- Cable clamps in black flame retardant zero halogen phosphorous free nylon (LSF).
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 15
Applications:
- Economic clamps for fixing and supporting house wirings.
Features:
- Single hole fixing strap type cable cleats.
- Suitable for cables from 10mm to 51mm overall diameter, can be installed
using wood screws.
- Manufactured in black LLDPE or black polymeric LUL zero halogen
material. The LUL version of this clamp is compliant with the requirement
of London Underground Standard 1-085. Product register no. 365.
SELECTION TABLE
Single Cable Dimensions Mounting
Part No.
Part No.
Range
Screws
LLDPE
LUL
Min O/D Max O/D
B
C
D
E
Qty in SWL
Wood
mm mm
mm mm mm mm Pack kgf Screw Screw
EP17-01B100 EP17-01LUL100
10
15
17.6 27.8
12
4.3
100
18
8G x 30 M4 x 30
EP17-02B100 EP17-02LUL100
12
17
20.8 32
14
4.3
100
24
8G x 40 M4 x 35
EP17-03B100 EP17-03LUL100
15
20
25.3 37.1
16
4.3
100
32
8G x 50 M4 x 40
EP17-04B100 EP17-04LUL100
18
24
29.6 41
18
4.3
100
39
8G x 50 M4 x 50
EP17-05B50 EP17-05LUL50
22
29
35.4 52.1
20
6.5
50
52
12G x 60 M6 x 55
EP17-06B50 EP17-06LUL50
26
34
40.9 58.2
22
6.5
50
66
12G x 75 M6 x 60
EP17-07B25 EP17-07LUL25
32
42
49.2 69.3
25
6.5
25
79
12G x 75 M6 x 75
EP17-08B25 EP17-08LUL25
39
51
58.5 81.7
26
6.5
25
93 12G x 100 M6 x 90
- Supplied in pack quantities shown in above.
- Mounting screws not included.
CORRECT INSTALLATION
INCORRECT INSTALLATION
www.ipdgroup.com.au
Ft = 0.17 x ip
S
WHERE
Ft = maximum force on the cable connector in trefoil formation for a three phase short-circuit (N/m).
ip = the peak short-circuit current (kA).
S = the cable diameter (m).
This formula gives the static load instantaneously created by the short circuit, however the phase changes of the alternating current
means that the force on the cable and their direction are changing continuously. No simple formula and no static test can assess the
effect of these dynamic forces.
The ultimate proof of any product to withstand a short-circuit is to undertake a short-circuit test.
Ellis Patents carry out short circuit tests on a regular basis at various testing stations in accordance with the requirements of the current
standards.
Contact your local IPD Branch or Customer Service at 1300 556 601 for a copy of test reports and video footage of tests on CD.
SELECTION OF ELLIS PATENTS TREFOIL CABLE CLEATS
When the cable diameter and anticipated maximum fault level are known, you are able to select a cleat and the appropriate spacing
to give the most economical installation.
The following tables give recommended cleat spacing for Ellis Patents range along the cable run of more popular cable sizes at
different peak fault current levels. Typical constraints such as rungs on cable ladders or confined installation space may mean other
alternatives must be considered.
Cable O.D. = 33mm
Cable O.D. = 38mm
Cable O.D. = 43mm
Cleat
Peak fault current kA
Peak fault current kA
Peak fault current kA
Spacing
(mm) Emperor Vulcan+ Vari-Cleat Alpha Emperor Vulcan+ Vari-Cleat Alpha Emperor Vulcan+ Vari-Cleat Alpha
300 199 152 124 96 213 163 133 103 227 173 141 110
450 162
124 101 79 174 133 108 84 185 141 115 90
600 140
107 87 68 150
115 94 73 160
122 100 78
900 115
88 71 55 123
94 76 60 131
100 81 63
1200 99 76 62 48 106
81 66 51 113 86 70 55
Contact your local IPD Branch or Customer Service at 1300 556 601 for cable installations outside these ranges.
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 17
PROJECTS
www.ipdgroup.com.au
PROJECTS
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 19
PROJECTS
www.ipdgroup.com.au
PROJECTS
FlexiStraps installation
Installation in CBD substation upgrade
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 21
FAQ
Question:
How do I choose the appropriate cleat for the application?
Answer:
Supply us with the details of environment, mounting structure, cable configuration, peak short circuit fault level and
cable diameter. We will advise the type of cleat to use and its spacing.
Question:
Why do IPD & ELLIS offer so many different types of Trefoil cleats?
Answer:
The cleats have varying strength characteristics relevant to the fault current levels. Refer to the respective applications,
data, material and test results of different cable cleats.
Question:
Why do I need to use a liner?
Answer:
The liner provides added protection and cushions the cables during short circuit conditions.
Question:
Why are cleats produced in stainless steel or aluminium?
Answer:
Both stainless steel and aluminium are non magnetic materials and are unaffected by the magnetic fields, which
surround power cables. Cables fixed with cleats made of magnetic materials can cause localized heating of the cable
through the effect of induction.
Question:
Please can I have some advice on securing multi core cables?
Answer:
We are not aware of any published data, which indicates any particular fixing method but custom and practice suggests
that most users presume that any forces on the conductors, which arise in the event of a short circuit, will be restrained
within the cable outer sheath and therefore cable cleats are not required. The mechanisms within a multi-core cable, which
help restrain the conductors in the event of a short circuit include:
1.The cable outer sheath.
2. The helical winding of the cores.
3. Steel wire or other type of armour if present.
In order to be able to provide meaningful advice we undertook a series of short circuit tests using 3 core, copper
conductor, multi-core cables from various cable manufacturers. Both armoured and unarmoured cables were tested
across a variety of conductor sizes but because of the number of manufacturers and the variety of cable types and
methods of construction available, it was not feasible to carry out exhaustive tests. The results of the tests were varied but
clearly showed that it is unsafe to presume that the forces between the conductors will always be restrained within the
outer sheath of the cable, whether or not the cable is armoured or tightly helically wound. Our conclusion is that, unless the
relevant cable manufacturer can give assurances regarding the performance of their specific cable at the anticipated
fault level, fault rated cable cleats provide the safest option for securing multi-core cables.
www.ipdgroup.com.au
FAQ
Question:
What is Thread Galling?
Answer:
Thread galling is a known phenomenon which can occur when using stainless steel fasteners. A breakdown in the
materials protective oxide layer results in the set screw and nut becoming welded together. To reduce the incidence of
thread galling, excessive pressure and speed should be avoided during installation. Thread lubricants can also be used
at the point of application if problems are experienced.
Question:
What is the difference between 316, 316L, 304 and 304L stainless steel?
Answer:
304 and 316 are both similar austenitic stainless steels, which are designed to withstand corrosion. 316 is the superior
grade because it contains molybdenum, which enhances its resistance to corrosion and makes it appropriate for use in
a marine environment. There is a simple test which may be carried out to determine whether molybdenum is present in
a particular sample of steel. The importance of using 316L rather than 316 stainless steel, relates to the corrosion
resistance of the steel after welding. Stainless steel resists corrosion because it forms an impervious oxide layer on its
surface which heals itself when oxygen is present. When stainless steel is welded, chromium carbide may precipitate at
the grain boundaries. This depletes the chromium within the austenite and prevents the passive oxide layer
being formed. Because the grain boundaries are small and highly anodic, rapid corrosion occurs. This process can be
prevented by using steels with a carbon content of less than 0.035 (316 has typically les than 0.07% carbon, 316L has
typically less than 0.03% carbon).
Question:
What is Galvanic Corrosion?
Answer:
When dissimilar metals are in contact in the presence of an electrolyte, galvanic corrosion occurs. This means that one
of the metals will be protected and the other metal will suffer accelerated corrosion. Although seawater is an
obvious electrolyte, all atmospheric moisture acts as an electrolyte to some degree so galvanic corrosion will almost
always occur when dissimilar metals are in contact. However, this may not always be detrimental such as in the case of
galvanized steel, where the zinc coating acts as a sacrificial anode and protects the steel it covers, even when the surface
is scratched. Although they are different materials, it is quite acceptable to fasten a stainless steel cleat to galvanized
latter using a stainless fixing because the corrosion resistant properties of stainless steel are brought about by the metals
ability to generate a passive impervious film on its surface, which self repairs in the presence of oxygen. If the passive
layer breaks down (say due to movement between the cleat or bolt and the galvanized ladder) galvanic corrosion will
take place but the zinc layer on the ladder will then protect the cleat and its fixing by the same mechanism by which it
protects the steel ladder itself. In the process of galvanic corrosion the more resistant metal (in the case the stainless
steel cleat) becomes less susceptible to corrosion and the less resistant metal (the galvanized steel ladder) becomes
more susceptible to corrosion. However, the ratio of areas of both metals is very significant and because the surface
area of the ladder is much greater than the surface area of the cleats the rate of increased corrosion on the ladder
becomes negligible. A good example of the effect of surface area on galvanic corrosion is to look at the suitability of
fasteners for fittings on boats. It would be quite acceptable to use a stainless fastener on a galvanized fitting (the fitting
acts as the sacrificial anode and protect the fastener) but unacceptable to use a galvanized fastener on a stainless fitting
(the fastener acts as the sacrificial anode and corrodes away at an accelerated rate).
More FAQ can be found on our website
www.ipdgroup.com.au
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 23
PROJECT GALLERY
WORLDWIDE
ALSTOM Power
China Light & Power, HK
Chep Lap Kok Airport Project, HK
Thames 24Seven Tunnel Project, UK
Shell Shearwater Development Project, UK
Devonport Submarines Base, UK
Tai Shan Nuclear Power Plant - China
Hydro Accumulative power plant- Russia
BP Wellhead Platform, Norway
Shell - Nam Petrochemical, Netherland
Power Cable Tunnel - London
Areva T & D
ALSTOM T & D
Phillips Petroleium, Norway
Norsk Hydro, Norway
Channel Tunnel Rail Link, UK
P43 FPSO Vessel Project, Singapore
Cegelec Power Station Project, Indonesia
Conoco project, Dalian, China
ADWEA Substation Project, U.A.E.
Dupont Petroleum Plant, Luxembourg
Electricity Supply Board, Ireland
Electricity Authority, Cyprus
Tractebel - LNG Terminal, Portugal
Nexans - Tunnel Project, Switzerland
Exxon Mobil PT Erha FPSO, Malaysia
GE Wind Energy, USA
MTRC Railway Extension, HK
Petro Canada - North Sea Development Project, Holland
Wesco
Abu Dhabi Water & Electricity
Italian Railways
Network Rails, UK
In Amenas - Substation Project, Algeria
Woodhead Cable Tunnel - UK National Grid
Lusail City, Qatar
Shamiya Haram Expansion - Saudi Arabia
Ling Ao Nuclear Power Plant - China
Ledvice Power Plant - Czech Republic
Flamanville Nuclear Power Plant - France
Olkiluto Nuclear Power Plant - Finland
Petrobras Drilling Platform - Brazil
Pueblo Viejo Mine - Dominican Replublic
Shell Bonga FPSO - Nigeria
Terra Nova FPSO - Cananda
GEWE Wind Farm - USA
Phone: 1300 556 601
www.ipdgroup.com.au
QR Code
Scan the code above
with a smartphone to
open the video from
our Youtube channel.
Ellis Patents - Short Circuit Testing Video
Impact test
www.ipdgroup.com.au
Cable Cleats & Clamps Catalogue 2014 25
DARWIN
GLADSTONE
BRISBANE
NEWCASTLE
PERTH
SYDNEY
ADELAIDE
AUCKLAND
MELBOURNE
HOBART
QR Code
Scan the code above with
a smartphone to view the
NEW IPD website