Professional Documents
Culture Documents
OMD9SJ201 BSC6900 Operation and Maintenance Lab Guide ISSUE1.00
OMD9SJ201 BSC6900 Operation and Maintenance Lab Guide ISSUE1.00
Table of Contents
Table of Contents
BSC Operation and Maintenance Practice.........................................................................................1
1.1 Network Description............................................................................................................................................. 1
1.2 Practice Tasks........................................................................................................................................................... 1
1.3 Additional Task ....................................................................................................................................................... 4
Switchover Board
Make a call, then perform switchover to GXPUM to check whether the call is
affected
(4)
Reset Board
Reset the main GEIUB in GMPS and check whether the switchover is
performed automatically
2. Maintain BSC Interface Status
(1)
E1 Status:
Transmit Frame type:
(2)
(3)
Query E1 port status of the Ater interface, perform remote loop back
of first port in GEIUT(GMPS) then check the E1 status of the
corresponding port in GEIUT(GTCS)
BTS name:
OML ID:
TRX No.:
RSL ID:
(5)
Link No.:
Using State:
Link No.:
Using State:
(7)
Query A interface circuit then make a call , write down the status of idle
circuits and busy circuits
(23) Make a call then perform DSP speech channel loopback to BTS
direction, please describe what happens to the voice heard from the
MS
Faulty Status:
(27) Query SIG BVC status and write down the status
Normal Status:
Faulty Status:
(28) Query PTP BVC status and write down the status
Normal Status:
Faulty Status: