Professional Documents
Culture Documents
Equipment User Guide
Equipment User Guide
Equipment User Guide
Wireless Connections
All buildings on campus have wireless coverage. Users should connect to the network Snapdeal with active
directory username and password. If in case you dont remember your active directory password please
contact IT to reset password. Please refer attached manual for more details.
Wired Connections
Wired connection at Snapdeal is again protected by active directory username and password. All workstations
will be connected through IP phones for wired connectivity. After connecting your workstation to IP phone a
message will pop-up in the system tray on the lower right portion of your screen requesting additional
information, click on it.
Note: It may take a minute or so for this box to appear.
In the window that appears type in your Snapdeal Active directory username and password and click OK.
You should now be able to use the Snapdeal secure wired network (if not, try restarting the computer). Still
you are not able to connect to wired network, please contact IT.
IP Phones
IP phone is provided on all desks at Gurgaon desk. These phones dont have any xed extension number, as
the extension number is allocated to all users. Users can login to any desk phone with their assigned
extension number. Follow the login procedure in attached document for activation of your extension. Please
refer to welcome mail from IT for your extension number.
Printers
Network printers are located in convenient locations throughout the Gurgaon campus. Open Printers by
clicking the Start button, clicking Control Panel, clicking Hardware and Sound, and then clicking printers. Click
Add a printer. In the Add Printer Wizard, select Add a network, wireless or Bluetooth printer. In the list of
available printers, select the one you want to use, and then click Next. If your computer is connected to a
network, only printers listed in Active Directory for your domain are displayed in the list. If prompted, install
the printer driver on your computer. If you are prompted for an administrator password or conrmation, type
the password or provide conrmation. Please refer following pages for detail instruction on windows and
Ubuntu.
Connecting to the
2. Select Snapdeal from the list that pops up. If Snapdeal is not on the list, hover over "More
networks" at the bottom of the list, and select Snapdeal from the extended list that pops
up.
3. A box will pop up titled "Wireless Network Authentication Required".
Leave "Wireless security" set to WPA & WPA2 Enterprise.
Change Authentication to Protected EAP (PEAP).
Leave Anonymous identity blank.
4. In the two boxes labeled Username and Password, enter your Snapdeal Active Directory
username and password.
5. Finally, in the lower right-hand corner of the box, click Connect.
6. The wireless icon in the Application Panel should ash for a few seconds, and then a
pop-up message should conrm that you are connected to Snapdeal.
Connecting to the
2. A window with available network connections will open, as you can see from the
screenshot below. Select Snapdeal and click Connect.
3. After a few seconds, you will be asked to enter the username and password Users should
enter active directory username and password. After entering the password it might pop
up another dialog box which says, "connect" please click on "connect". If in case you
dont remember your active directory password please contact IT to reset password.
Login Process:
1. Press the settings button.
2. Browse down through the menu and select "Extension Mobility".
3. After you select Extension Mobility you will be prompted for User ID.
4. Enter your User ID. You need to enter 10134.
5. After entering your User ID browse down and enter your PIN.
6. By default your PIN is set to "12345".
7. After entering the PIN press the "SUBMIT" button.
8. After you press the Submit button the phone will display "Login Successful".
9. After your Login the phone will "Restart".
10. After Restart your Extension will be displayed on the Phone.
Logout Process:
1. Press the settings button.
2. Browse down through the menu and select "Extension Mobility".
3. After you select Extension Mobility the phone will ask for conrmation to Logout.
4. After you press "Yes" you will be logged out.
5. After Logout the phone will restart and return back to normal state.
Step 2
Step 3
When you are ready to start the meeting, lift the handset to get a dial tone and
press twice top right soft key to get Meet Me option
Step 4
Dial the Meet Me phone number that the conference host provides.
Step 2
If you hear a busy tone, the host has not yet joined the conference. In this case,
hang up and try your call again.
Step 2
Press Conference.
Step 3
Enter the phone number for the party that you want to add or press a speed
dial button.
Step 4
Wait for the party to answer, or skip to step 5 while the call is ringing.
Step 5
Step 6
Step 2
Highlight the participant that you want to remove, then press Remove.
Note
The person who creates the conference can only view the Remove softkey.
Dial
2.
Answer
3.
Hold
4.
Transfer
5.
Conference
6.
Mute
7.
Voicemail
8.
Decline
9.
Forward All
10.
Call History
11.
Directories
12.
Shared Lines
13.
Settings
14.
Navigation
15.
Tips
QUICK START
1 Dial
To place a call, pick up the handset and enter a number.
Or, try one of these alternatives.
Dial
Answer
Hold
Transfer
Conference
Mute
Voicemail
Decline
Forward All
10 Call History
11 Directories
12 Shared Lines
13 Settings
14 Navigation
15 Tips
Note
Speed Dial
Enter a speed-dial item number and press SpeedDial.
Or, press the down arrow on the Navigation ring when
the phone is idle, scroll to a speed-dial item, and press
the Select button or Call. You may also have speed
dials assigned to some buttons on your phone.
2 Answer
The new call indicators are: a flashing amber line
and caller ID, and a
button, an animated icon
flashing red light on your handset.
To answer the call, lift the handset. Or, press the
flashing amber line button, Answer, the unlit headset
button, or the speakerphone button.
4 Transfer
6 Mute
1. Press Hold
. The hold icon
the line button flashes green.
appears and
7 Voicemail
5 Conference
1. From an active call (not on hold), press
.
Conference
2. Make a new call.
3. Press the Conference button or softkey before or
after the party answers. The conference begins and
the phone displays Conference.
4. Repeat these steps to add more participants.
The conference ends when all participants hang up.
Listen to Messages
Press Messages
and follow the voice prompts. To
check messages for a specific line, press the line button
first.
8 Decline
Press Decline when the call is ringing, active, or on
hold. Decline redirects an individual call to voicemail
or to another number set up by your system
administrator.
9 Forward All
1. To forward calls received on your primary line to
another number, press Fwd All.
2. Enter a phone number or press Messages
forward all calls to voicemail.
to
12 Shared Lines
Recents.
and choose
13 Settings
Volume
The Volume bar is located to the left of the keypad.
2. Press Missed.
11 Directories
1. Press Contacts
2. Choose a directory.
3. Use your keypad to input search criteria.
Ringtone
1. Press Applications
Screen contrast
1. Press Applications
4. Press Submit.
4. Press Save.
15 Tips
How Can I Manage Multiple Calls?
Line button colors indicate call states and can help you
stay oriented when handling multiple calls:
TouchPad MX 200G2
user guide
TC7.3
In a call
tap Add .
Method B (MultiWay/CUCM):
Repeat the procedure to
add more participants.
In a call
tap Add .
Tap Merge to
turn the current
call into a conference.
Sharing content
Make sure your presentation source is switched on and connected to
the video system before you tap Presentation .
Keyboard layout
Tap
Preview , if you want to
check what you will share
before you share it, and then
tap
Share to actually start
sharing the content of your
source.
Scroll in lists
as on a smart
phone.
Tap a button
to activate its
function.
Tap the ? to
contact or
access the Help
desk , if available.
TC7.3
Time of day is
indicated in the
upper right corner.
Tap
Presentation
to start sharing
content and
to conduct
presentations.
Tap Dial to
invoke the
dial pad.
Tap Contacts to
invoke the list of
contacts including
Favorites ,
Directory and
History.
Tap Meetings
to invoke a list
of upcoming
scheduled
meetings.
Tap
Messages
to invoke the
voice mail
system, if
applicable.
Press the
Microphone
button to
mute / unmute
microphone.
K
N
A
H
T
!
U
YO