Professional Documents
Culture Documents
KitSound - MANHATTAN Wireless Manual
KitSound - MANHATTAN Wireless Manual
uk
Li-PO
JB. 2528 / Made in China. KitSound 2013 Christchurch, Dorset. BH23 4FL
MANHATTAN
Wireless
HEADPHONES
User Manual
Functions
1. Microphone
Connect the micro USB end of the charging cable to the charging port and the standard USB end to a
PC/USB charger. The Indicator LED will be red whilst charging. It will turn off after around 2-3 hours.
The battery is now fully charged.
2. Charging port
3. Power Switch
If the Indicator LED flashes red twice every 30 seconds whilst using the headphones, this means the
battery is running low. Once this happens you have about 5-10 minutes of use before the headphones
power off automatically.
4. Vol
5. Multi-Function Button
(Play/Pause)
6. Vol +
7. Indicator LED
Bluetooth
1
3
2
7
2. Move the Power Switch to the position. The Indicator LED will flash red and blue.
3. Activate the Bluetooth feature on your device and search for Bluetooth devices
(check your device manual if youre unsure how to do this).
4. Select Manhattan DT from the list of found devices.
5. If asked for a passcode, enter 0000 and the headphones will then be connected to your device.
6. T he next time the headphones are switched on, they will automatically search for and attempt to
connect to the last paired device. If no device is found, the headphones will automatically go into
pairing mode.
Basic use
Power ON:
LED Indication
State of Manhattan
Powering on
To end call:
Powering down
To reject a call:
Pairing mode
Voice dialling: In standby mode (connected with no music playing), press and hold the
Multi-Function Button (not supported by all devices).
Redial:
Charging
Fully charged
Volume +: Whilst having a conversation or listening to music, push the Multi-Function Button
to Vol + and hold until the desired volume reached. The headphones will beep
when at maximum volume.
Volume -: Whilst having a conversation or listening to music, push the Multi-Function Button
to Vol and hold until the desired volume reached. The headphones will beep
when at minimum volume.
Previous track: Push the Multi-Function Button to Vol and immediately release.
Next Track:
Play/Pause:
Specifications
Bluetooth:
Frequency response:
Talk time:
Play time:
Standby time:
Bluetooth profile:
Battery type:
Power requirement:
Operating temperature:
Battery information
v2.1
40 Hz - 20 kHz
Up to 30 hours
Up to 18 hours
Up to 300 hours
Handset, hands-free, A2DP, AVRCP
Li-Po, rechargeable
5 V DC, 100-240 V AC adapter.
-10 to 55C
Troubleshooting
If you cannot connect the headphones to your device, please try the following:
1. Ensure that the headphones are charged, switched on, paired with and connected to your device.
2. Check the headphones are within 10 metres (30 feet) of your device and that there are no obstructions
between the headphones and the device such as walls or other electronic devices.
10
Your device is powered by a rechargeable battery. Unplug the charger from the electrical plug and the
device when not in use.
If left unused, a fully charged battery will lose its charge over time. We recommend a full charge once
every 3 months even if not used.
Please do not leave the device in hot or cold places, such as in a closed car in summer or winter
conditions as it will reduce the capacity and lifetime of the battery.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged.
WARNING:
Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when
using these headphones, especially for extended periods.
For your own safety, please do not use these headphones when operating a motor vehicle on a public
road, or where the inability to hear outside sounds may present a danger to the user or others.
11