Professional Documents
Culture Documents
A-201 MSDS
A-201 MSDS
A-201 MSDS
MSDS Number
89183
Catalyst, Adsorbent
Manufacturer or supplier's
details
UOP LLC
25 E. Algonquin Road
Des Plaines, IL 60017-5017
USA
Telephone
Telefax
:
:
+1-847-391-2000
+1-847-391-2253
: Beads or pellets
Color
: white
Odor
: none
Hazard Summary
/ 11
Eyes
Ingestion
Inhalation
Chronic Exposure
: Prevention:
Use personal protective equipment as required.
Carcinogenicity
No component of this product present at levels greater than or equal to 0.1% is identified as a known
or anticipated carcinogen by NTP, IARC, or OSHA.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature
: Mixture
Chemical Name
CAS-No.
Concentration
1344-28-1
<97.00 %
Water
7732-18-5
<10.00 %
Page 2
/ 11
Skin contact
Eye contact
Ingestion
Notes to physician
Treatment
: Not combustible.
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Environmental precautions
/ 11
Storage
Requirements for storage
areas and containers
Engineering measures
Eye protection
Safety glasses
Safety goggles
Hand protection
Protective gloves
Respiratory protection
/ 11
Further
information
Aluminum oxide
(non-fibrous)
Further
information
Aluminum oxide
(non-fibrous)
Further
information
Aluminum oxide
(non-fibrous)
Further
information
Aluminum oxide
(non-fibrous)
Further
information
Value
Control
parameters
1 mg/m3
1344-28-1
TWA :
time
weighted
average
: Form of exposure : Respirable fraction.
1344-28-1
PEL :
15 mg/m3
Permissi
ble
exposure
limit
Upda Basis
te
2009 ACGIH:US. ACGIH
Threshold Limit
Values
02
2006
OSHA_TRANS:US.
OSHA Table Z-1
Limits for Air
Contaminants (29
CFR 1910.1000)
02
2006
OSHA_TRANS:US.
OSHA Table Z-1
Limits for Air
Contaminants (29
CFR 1910.1000)
1344-28-1
1989
Z1A:US. OSHA
Table Z-1-A (29
CFR 1910.1000)
1344-28-1
1989
Z1A:US. OSHA
Table Z-1-A (29
CFR 1910.1000)
1344-28-1
PEL :
5 mg/m3
Permissi
ble
exposure
limit
TWA :
10 mg/m3
time
weighted
average
: Form of exposure : Total dust.
TWA :
5 mg/m3
time
weighted
average
: Form of exposure : Respirable fraction.
Page 5
/ 11
: Beads or pellets
Color
: white
Odor
: none
pH
: > 400 C
Flash point
Density
Specific gravity
: > 2.0
Water solubility
: Note: insoluble
Bulk density
Page 6
/ 11
: Stable
Hazardous decomposition
products
Skin irritation
Eye irritation
Further information
Page 7
/ 11
Ecotoxicity effects
Toxicity to fish
Toxicity to algae
Mobility
Biodegradability
: This product (in its fresh unused state) is not listed by generic
name or trademark name in the U.S. EPA's RCRA regulations
and does not possess any of the four identifying
characteristics of hazardous waste (ignitability, corrosivity,
reactivity or toxicity).
Materials of a hazardous nature that contact the product
during normal use may be retained on this product. The user
of the product must identify the hazards associated with the
retained material in order to assess the waste disposal
options.
Page 8
/ 11
TDG
IATA
IMDG
: On TSCA Inventory
Australia. Industrial
Chemical (Notification and
Assessment) Act
Canada. Canadian
Environmental Protection
Act (CEPA). Domestic
Substances List (DSL)
Page 9
/ 11
: No SARA Hazards
California Prop. 65
Massachusetts RTK
1344-28-1
1344-28-1
Pennsylvania RTK
1344-28-1
WHMIS Classification
: Not Rated
This product has been classified according to the hazard criteria
of the CPR and the MSDS contains all of the information
required by the CPR.
HMIS III
: 1
: 0
: 1
:
NFPA
1
0
1
Hazard rating and rating systems (e.g. HMIS III, NFPA): This information is intended solely for the
use of individuals trained in the particular system.
Page 10
/ 11
Further information
The information provided in this Safety Data Sheet is correct to the best of our knowledge,
information and belief at the date of its publication. The information given is designed only as a
guidance for safe handling, use, processing, storage, transportation, disposal and release and is not
to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text. Final determination of suitability of any
material is the sole responsibility of the user. This information should not constitute a guarantee for
any specific product properties.
Changes since the last version are highlighted in the margin. This version replaces all previous
versions.
Previous Issue Date: 10/18/2012
Prepared by Honeywell Performance Materials and Technologies Product Stewardship Group
Page 11
/ 11