Professional Documents
Culture Documents
Layover Inspection Schedule Issue 09 (A320-232)
Layover Inspection Schedule Issue 09 (A320-232)
INTERVAL
DATED: 14.06.2016
PAGE: 1 of 19
CHECKED BY:
DIVISION
TECH RECORDS
FORM NO.IGO/E&M/A320/LO/41A
NAME
DATE
SIGNATURE
INTERVAL
DATED: 14.06.2016
PAGE: 2 of 19
FORM NO.IGO/E&M/A320/LO/41A
INTERVAL
DATED: 14.06.2016
PAGE: 3 of 19
MANPOWER DETAILS
CERTIFYING STAFF
SN
NAME
LIC/APP./AUTH.
STAMP
CAT
SHORT
SIGN.
SIGNATURE WITH
DATE
1
2
3
4
5
6
TECHNICIANS
SN
NAME
1
2
3
4
5
6
7
8
FORM NO.IGO/E&M/A320/LO/41A
EMP. ID
SHORT SIGN.
SIGNATURE WITH
DATE
INTERVAL
DATED: 14.06.2016
PAGE: 4 of 19
FLIGHT REPORT
SECTOR FLOWN
DATE OF FLIGHT
FLIGHT NO.
FROM
TIME IN AIR
TO
AIRBORNE
TOUCH DOWN
IN AIR
NO. OF
LDGS.
ENG 2
APU
TOTAL
PREVIOUS DAY RECORD
TOTAL
NOTE: THIS FLIGHT TIME LOG IS TO BE FILLED AND CERTIFIED BY THE APPROVED/AUTHORISED PERSON
FORM NO.IGO/E&M/A320/LO/41A
DATE
TIME
SIGN
(CERTIFYING STAFF)
APP. / AUTH.
STAMP
CAT
INTERVAL
DATED: 14.06.2016
PAGE: 5 of 19
NOMENCLATURE
QTY
NOT SPECIFIC
AS REQUIRED
WARNING NOTICES
NOT SPECIFIC
AS REQUIRED
SAFETY BARRIER
NOT SPECIFIC
AS REQUIRED
NOT SPECIFIC
AS REQUIRED
LINT-FREE CLOTH
NOT SPECIFIC
AS REQUIRED
SPONGE
NOT SPECIFIC
AS REQUIRED
NOT SPECIFIC
AS REQUIRED
GLOVES - RUBBER
NOT SPECIFIC
AS REQUIRED
GOGGLES - PROTECTIVE
NOT SPECIFIC
AS REQUIRED
10
NOT SPECIFIC
11
METALLIC CONTAINER
NOT SPECIFIC
AS REQUIRED
12
D23156000
13
D23080000
14
460007280/
DRT68923
15
ENGINE OIL
AS REQUIRED
16
HYDRAULIC FLUID
SKYDROL LD4
CML REF : 02-003D OR 02-506
AS REQUIRED
17
AS REQUIRED
18
19
20
21
1
98A28101000000/ 98D28104000000
98A28104000000
98A28104000002
97A28002117002
1
1
1
NOT SPECIFIC
AS REQUIRED
98A10001013000
22
COVER-PITOT PROBE
98A10001005000
23
98A10001500000/
98D10003003000/
98F10001000000
24
COVER-STATIC PROBE
98D10103500001
25
98D10103501000
26
PUMP - SUCTION
NOT SPECIFIC
27
NOT SPECIFIC
28
NOT SPECIFIC
29
NOT SPECIFIC
30
DEODORANT-AIRCRAFT TOILETS
AS REQUIRED
31
FILM - POLYETHYLENE
NOT SPECIFIC
AS REQUIRED
FORM NO.IGO/E&M/A320/LO/41A
INTERVAL
DATED: 14.06.2016
PAGE: 6 of 19
SN
NOMENCLATURE
QTY
32
TAPE - ADHESIVE
NOT SPECIFIC
AS REQUIRED
33
VACUUM CLEANER
NOT SPECIFIC
34
AS REQUIRED
35
AS REQUIRED
FORM NO.IGO/E&M/A320/LO/41A
INTERVAL
DATED: 14.06.2016
PAGE: 7 of 19
SKILL
CODE
DESCRIPTION
ARRIVAL
1
AF
Install the nose landing gear and the main landing gear ground lock safety
devices (as necessary). REF: AMM TASK 32-00-00-481-001
AF
If aircraft towing is required, place the towing lever in the "towing position"
and install pin.
REF: AMM TASK 09-10-00-860-092
AF
AF
Review the aircraft technical log and start corrective actions as necessary.
AF
NOTE: If the aircraft electrical network is not energized, perform items 6 and
7 otherwise continue with item 8
AF
AF
AF
If STS has appeared on the upper ECAM DU, check for messages in the
maintenance section of the STATUS page on the lower ECAM DU. Start
corrective actions as required.
AF
ENGINE OIL
(MPD 791000-I1-1-IGO) REF: AMM TASK 12-13-79-610-011
Check oil level and replenish.
WARNING:
IF NECESSARY TO REMOVE THE OIL TANK CAP, YOU MUST
WAIT A MINIMUM OF 5 MINUTES AFTER ENGINE SHUTDOWN TO ALLOW PRESSURE IN OIL TANK TO DECREASE.
WARNING:
OIL IS DANGEROUS IF IT IS ALLOWED TO BE ABSORBED
THROUGH THE SKIN AND INTO THE BODY. IMMEDIATELY
FLUSH THE OIL WITH WATER.
CAUTION:
DO NOT PUT OIL THAT HAS BEEN DRAINED FROM THE ENGINE
BACK TO THE OIL TANK.
CAUTION:
SIGNATURE
(CERTIFYING STAFF)
FORM NO.IGO/E&M/A320/LO/41A
AUTH. STAMP
EN
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 8 of 19
SN
SKILL
CODE
DESCRIPTION
i.
EN
Also record the oil uplift in Tech Log and on page no.4 of this schedule.
10
i.
ii.
SIGNATURE
(CERTIFYING STAFF)
FORM NO.IGO/E&M/A320/LO/41A
AUTH. STAMP
EN
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 9 of 19
SN
11
SKILL
CODE
DESCRIPTION
HYDRAULIC RESERVOIR QUANTITY CHECK
WARNING: DO NOT GET HYDRAULIC FLUID ON THE SKIN OR EYES. FLUSH
WITH CLEAN WATER AND GET MEDICAL AID.
Do a fluid level check of the Green, Blue and Yellow hydraulic reservoirs
(On ECAM LOWER DISPLAY, HYD page).
Add hydraulic fluid to the reservoirs as necessary. Record uplift(s)
Green ..Qts.
Blue Qts
AF
Yellow .. Qts
EN
SIGNATURE
(CERTIFYING STAFF)
FORM NO.IGO/E&M/A320/LO/41A
AUTH. STAMP
AF
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 10 of 19
SN
14
SKILL
CODE
DESCRIPTION
UPPER HALF OF THE FUSELAGE
(MPD ZL-200-01-1-IGO) REF: AMM TASK:05-22-00-200-001
Do a general visual inspection of upper half of fuselage from ground as far as
possible for signs of corrosion, cracks or damage, including:
Cockpit & cabin windows: adjoining structure
Emergency exits
Anti-collision beacon light: Cleanliness
Antennas: No damage
AF
AF
WING
(MPD ZL-500-01-1-IGO)
WARNING:
AUTH. STAMP
AF
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 11 of 19
SN
SKILL
CODE
DESCRIPTION
(B) RIGHT/LEFT WING TIP AND TRAILING EDGE
Do a general visual inspection of the wing tip and trailing edge from ground
as far as visible, including:
Navigation and strobe lights for condition
Static dischargers missing or damaged
Control surfaces, flaps and flap track fairings: Damage, evidence of
fluid leakage
Lower wing surface: Damage, evidence of fuel leakage
Wing tank overpressure protector: Burst disk in place (White cross
visible
Landing light: No damage, cleanliness
Ensure that there are no signs of corrosion, cracks or damage.
17
AF
AF
19
DOORS
(MPD ZL-800-01-1-IGO) REF: AMM TASK: 05-28-00-200-001
Do a general visual inspection of all pax, service and cargo doors from
ground for signs of corrosion, cracks or damage.
4 Passenger/Crew doors
3 cargo compartment doors
4 overwing emergency exits
Service panel doors, avionic compartment access doors,
AF
TANKS
(MPD 281100-01-2) REF: AMM TASK: 12-32-28-281-001
Drain water from wing tanks and center tank at water drain valves
AF
Take fuel samples from all tanks. Check for any contamination. Check water
contents in the samples with Aquadis detector (HYDROKIT).
After drainage, make sure that the drain valves are correctly closed and not
leaking.
SIGNATURE
(CERTIFYING STAFF)
FORM NO.IGO/E&M/A320/LO/41A
AUTH. STAMP
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 12 of 19
SN
20
SKILL
CODE
DESCRIPTION
WHEELS
(MPD 324100-01-1)
Inspect Nose, RH / LH Main Landing Gear Wheels and Tyres for satisfactory
condition (Wear & Damage) including:
NOTE: For tyre damage, cuts, chord breakage etc refer to AMM Task
32-41-00-210-002.
CAUTION:
1. TYRE PRESSURE MUST BE CHECKED WHEN THE TYRES ARE NOT
HOT.
2. SERVICE TYRES WITH NITROGEN ONLY.
3. ON ANY DAY IF LOW TYRE PRESSURE IS SUSPECTED ON ANY WHEEL
DURING INSPECTION THEN CHECK THE TYRE PRESSURE OF THE
SUSPECTED WHEEL/S AND INFLATE TO MAXIMUM TYRE PRESSURE.
4. AT LINE STATION IF DRY NITROGEN GAS IS NOT AVAILABLE THEN
AIR MAY BE USED. BUT BEFORE USE IT MUST BE ENSURED THAT
THE AIR BEING USED HAS OXYGEN NOT MORE THAN 5% BY
VOLUME.
HOWEVER IF AIR WITH UNKNOWN OXYGEN CONTENT IS USED
THEN THIS AIR SHOULD BE REMOVED FROM TYRES WITHIN 15
HOURS AND THE TYRES CHARGED WITH DRY NITROGEN.
ACCORDINGLY A NOTING SHOULD BE REFLECTED IN DEFERRED
MAINTENANCE AND WORKORDER.
5. THE CHEMICAL REACTION BETWEEN THE OXYGEN IN THE TYRES
AND GASES FROM THE INNER LINER OF THE TYRE MAY CAUSE A
TYRE EXPLOSION.
Check and record tyre pressure and inflate to maximum specified tyre
pressure, if necessary
(TO BE DONE DURING NIGHT HALT ON SUNDAY, TUESDAY & THURSDAY)
NOTE:
CAUTION: IN CASE TYRE PRESSURE IS FOUND BELOW 170 PSI FOR NLG OR
BELOW 190 PSI FOR MLG REFER AMM TASK 32-41-00-210-059 FOR FURTHER
ACTION.
Continued
SIGNATURE
(CERTIFYING STAFF)
FORM NO.IGO/E&M/A320/LO/41A
AUTH. STAMP
AF
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 13 of 19
SN
SKILL
CODE
DESCRIPTION
INITIAL TYRE PRESSURE:
Main Wheels
#1
#2
Nose Wheels
#3
#4
#1
#2
#4
Nose Wheels
#1
#2
Tyre Pr.
(PSI)
FINAL TYRE PRESSURE:
Main Wheels
#1
#2
#3
AF
Tyre Pr.
(PSI)
Record the following Data:
TP Gauge Serial No. ..
21
AF
WASTE/WATER SERVICING
NOTE:
NOTE:
NOTE:
22
23
In freezing conditions, drain the potable water system and the toilet
waste tank. Service before aircraft departure.
Obey the cold weather maintenance procedure (Ref. TASK 12-31-38660-001).
If the temperature in the aircraft is below 4 DEG.C (39.20 DEG.F) do
the pre-conditioning procedure (Ref. TASK 12-33-21-618-001).
SIGNATURE
(CERTIFYING STAFF)
FORM NO.IGO/E&M/A320/LO/41A
AUTH. STAMP
AF
AF
AF
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 14 of 19
SN
SKILL
CODE
DESCRIPTION
FLIGHT COMPARTMENT
24
25
AF
AIRCRAFT DOCUMENTS
Check for the presence and validity (where applicable) of the following
documents. Torn/mutilated/missing/invalid documents must be replaced.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
26
Certificate of Registration
Certificate of Airworthiness
Airworthiness Review Certificate (ARC)
Aircraft Station License
Noise Certificate
Permit to Operate
Certificate of Insurance
Weight Schedule
Emergency Equipment Location Chart
LOPA
MEL Vol 1 and Vol 2
Flight Report Book (FRB)
Dent & Buckle Chart
Cabin Defect Log Book (CDLB) in passenger compartment.
AF
EMERGENCY EQUIPMENT:
Check the emergency equipment for presence, correct stowage & validity
(where applicable).
Refer Emergency Equipment Location Chart in Documents on-board file
for location and quantity of the equipment.
1. Crash Axe
2. Fire proof gloves
3. Life vest for crew
4. Portable fire extinguisher
5. Portable Breathing Equipment
6. Flash light
7. Escape Rope
SIGNATURE
(CERTIFYING STAFF)
FORM NO.IGO/E&M/A320/LO/41A
AUTH. STAMP
AF
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 15 of 19
SKILL
CODE
SN
DESCRIPTION
27
Check for the presence of Fan Cowl Doors (FCD) Latch Keys (Qty. 2) in the L/G
pins stowage compartment in cockpit.
Ensure that a flag "remove before flight" is attached to the keys.
NOTE:
1. TO BE PERFORMED ON AIRCRAFT WITH MODIFIED FAN COWL DOOR
LATCH (POST MOD SB A320-71-1069 & Goodrich VSB NAC-71-0331).
2. THE MODIFIED FAN COWL DOOR LATCH CAN BE IDENTIFIED BY THE
FOLLOWING:
a. ON THE FAN COWL, USE KEY SHALL BE PAINTED ADJACENT
TO THE LATCH.
b. IN THE COCKPIT, THE LANDING GEAR PINS STOWAGE
COMPARTMENT SHALL HAVE AN ADDITIONAL PLACARD
STATING FCD KEYS At the back of STWG.
EN
PASSENGER COMPARTMENT
28
EMERGENCY EQUIPMENT
Check the emergency equipment for presence, correct stowage & validity
(where applicable).
Refer Emergency Equipment Location Chart in Documents on-board file
for location and quantity of the equipment.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
SIGNATURE
(CERTIFYING STAFF)
FORM NO.IGO/E&M/A320/LO/41A
AUTH. STAMP
AF
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 16 of 19
SN
SKILL
CODE
DESCRIPTION
NOTE:
- If the Ready light is off, the AED is chirping, and the ibutton is flashing: The following may be the probable
causes:
a) A self-test error has occurred,
b) there is a problem with the pads,
c)
the Infant/Child Key has been left installed,
d) the battery power is low.
Press the i-button for instructions.
- If the Ready light is off but the AED is not chirping and
the i-button is not flashing: The following may be the
probable causes:
a) there is no battery inserted,
b) the battery is depleted,
c)
the defibrillator needs repair.
AF
29
30
Description
DEMO MASK
DEMO BELT
EXTENSION BELT
AF
General visual check of the left and right wing upper surface and control
surfaces, through cabin windows.
AF
SIGNATURE
(CERTIFYING STAFF)
FORM NO.IGO/E&M/A320/LO/41A
AUTH. STAMP
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 17 of 19
SN
SKILL
CODE
DESCRIPTION
AIRCRAFT CLEANING
31
32
33
COCKPIT AREA
Check and clean the cockpit area including windshield & windows, crew and
observer seats, floor area and cockpit door.
AF
CABIN
Check passenger compartment for general cleanliness including PSU,
Stowage compartments in galleys, toilets, doors, ceiling and side wall panels.
Passenger seat upholstery, carpets and passenger windows.
AF
EXTERIOR CLEANING
REF: AMM TASK 12-21-11-615-002
External surface of fuselage, wing control surfaces, landing gear doors.
Check that fuselage exterior is free from streaks and deposits.
AF
Visual check of the APU area from ground for general condition:
Air intake
Doors: Closed and secured
Drain mast, drains and vents
Exhaust
Fire extinguisher overpressure discharge indicator: Red disc in
place
EN
SIGNATURE
(CERTIFYING STAFF)
FORM NO.IGO/E&M/A320/LO/41A
AUTH. STAMP
EN
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 18 of 19
SN
SKILL
CODE
DESCRIPTION
SIGNATURE
(CERTIFYING STAFF)
FORM NO.IGO/E&M/A320/LO/41A
AUTH. STAMP
EN
TECH
CERTIFYING
STAFF
INTERVAL
DATED: 14.06.2016
PAGE: 19 of 19
ORGANIZATION APPROVAL
REFERENCE
AIRBUS A320-232
MSN
REGISTRATION
TAH
TAC
WORK ORDER
NO.
RECORD WORKORDER & TASKCARD NUMBERS (AS APPLICABLE), INCLUDING A BRIEF DESCRIPTION OF WORK
PERFORMED*
CERTIFIES THAT THE WORK SPECIFIED EXCEPT AS OTHERWISE SPECIFIED WAS CARRIED OUT IN ACCORDANCE WITH
CAR-145 AND IN RESPECT TO THAT WORK THE AIRCRAFT/AIRCRAFT COMPONENT IS CONSIDERED READY FOR
RELEASE TO SERVICE.
CERTIFYING
STAFF (NAME)
SIGNATURE
LIC/APP./AUTH.
STAMP
LOCATION**
DATE
TIME
FORM NO.IGO/E&M/A320/LO/41A
Issue 1