Side-Mounted Turn Signals, Removing and Installing

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Side-mounted turn signals

Page 1 of 2

94-22

Side-mounted turn signals


Side-mounted turn signals, removing
and installing
CAUTION!
Disconnect the battery Ground (GND) strap
before working on the electrical system.
Notes:
Before disconnecting the battery determine the
correct coding for the anti-theft radio.
After reconnecting the battery, check and
activate the vehicle's electrical equipment
(radio, clock, comfort and convenience
features, etc.) as outlined in this Repair Manual
or the Owner's Manual.
Removing
- Press side turn signal lens against retaining tab in direction of arrow
and carefully remove from fender opening.
- Carefully pull housing -2- out of rubber socket -1-.
- Bulb -3- can be pulled out of rubber socket -1- for replacement.
Installing

http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.94.4

11/20/2002

Side-mounted turn signals

Page 2 of 2

- Install in reverse order of removal.

http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.94.4

11/20/2002

You might also like