Professional Documents
Culture Documents
78 Chapter 5. Case Study: Hole Feature Usefull Help in Meshing
78 Chapter 5. Case Study: Hole Feature Usefull Help in Meshing
new correctly defined hole, hole feature wont have any problem orientating mesh around
the hole during RECON. command, as depicted in Figure 5.10.
The violet and red highlighted elements, visible in Figures 5.11, 5.10 and 5.9, are elements
that have edges with lengthes above the maximum value or below the minimum value, respectively. These elements are very plausible for the FEA if their size do not deviate too much
from the neighbor elemements sizes.