Professional Documents
Culture Documents
Parametric Projects PDF
Parametric Projects PDF
Parametric Projects PDF
1.
2.
3.
4.
5.
6.
7.
Facing
Contour
Rectangular Pocket
Circular pocket
Circular hole pattern
Rectangular hole pattern
Polygon & slots
Facing
Inputs: X WP Length
Y WP Width
F Feed
S Speed
I mm or inch Mode
T Tool Diameter
C Facing Value
J Overlap
U Rapid Travers Speed [mm/min]
(1)
X>Y
(2)
Technique
Select Suitable Technique according to machining time
Generate Alarm If the user left any variable empty
Y>X
Contour
Inputs
B
W
F Feed
S Speed
I mm or inch
T Tool Diameter
X , Y ,W
D Depth of Cut
Z Total Depth ( -Ve )
C Start plan
A C or R Value for 1St Corner
B C or R Value for 2nd Corner
E C or R Value for 3rd Corner
H C or R Value for 4th Corner
Technique
plunge roughing technique
Finishing pass
Each corner is selectable to be round or chamfer
Generate Alarm If the user left any variable empty
Rectangular Pocket
C
Z
Inputs
X, Y Center of pocket
R Radius of Fillet
M Pocket Length
W Pocket Width
D Depth of Cut
Z Total Depth (-ve)
Q Angel of inclination
C Start Plan
F feed
S Speed
I mm or inch
T slot tool Diameter
U Finishing Allowance in (x, y and z)
V Chamfer value
E slot tool No.
H Dovetail tool No.
J Dovetail diameter
Technique
Generate Alarm If the user left any variable empty
Generate Alarm if [ >
1
2
R
W
Q
X
Inputs
F Feed
S speed
A No. of Holes
j
R Retract plan
I mm or inch
J pitch Radius
Q First angle
Technique
Generate Alarm If the user left any variable empty
Do not allow to execute drill holes if the drilled holes very close
Inputs
F Feed
S speed
A mm or inch
C Cycle Type (81,83,73,84,85)
R Retract plan
I distance between holes in X-direction
J distance between holes in Y-direction
V No. of columns
W No. of rows
Q angle
X, Y first hole center
K Counter Bore or Counter Sink or normal
T Depth of cut (T=0 at reaming or taping)
M Thread Length (M = 0 at none tapped hole)
D No. of Starts and thread pitch (D=0 at none tapped hole)
Z drill Depth
B Counter (bore /sink) tool No.
E Tools No. (centering tool No., Drilling Tool No., Tapping Tool No., Reaming Tool No.)
H Drilling Tool Diameter
Technique
Generate Alarm If the user left any variable empty
Do not allow to execute drill holes if the drilled holes very close