Professional Documents
Culture Documents
Name of The Equipment: Automatic Electric Strength (BDV) Measuring Equipment
Name of The Equipment: Automatic Electric Strength (BDV) Measuring Equipment
Section
Topic
Issue No:
Issue Dt.
Page No.
Issued by
Document
: 0
: FORMAT 6 OF PROCUREMENT PROCEDURE OF CPRI (NON-WORKS)
: 2
: 30.06.2003
: 10 OF 19
: QA
: DQM-01
FORMAT NO.:PUR/TENDDOC/P10/06
CPRI
www.tenderwizard.com/CPRI
Section II -Technical Specification
Tender Enquery No : PUR/DMD-09/15-16
Name of the Equipment: Automatic Electric Strength (BDV) measuring equipment.
Note :The Offers should be submitted only in this format otherwise the offer will be liable for rejection. A detailed technical
catalogue/literature/phamplet and any other technical details shall be sent in hard copy in a sealed cover superscribing enquiry number and due date
so as to reach the following address within the due date and time. This is very much essential to evaluate your offer.
Sl.No.
Parameters
Quantity
1 Place where
1. DMD, CPRI, Bengaluru
equipment to be 2. RTL, CPRI, Noida
supplied
3. STDS, CPRI, Bhopal
4. UHVRL, CPRI, Hyderabad
5. RTL, CPRI, Kolkatta
6. RTL, CPRI, Guwahati
2 Scope
Supply, Installation and Training
3 Nos
2 Nos
1 No
1 No
1 No
1 No
COMPLIED
COMPLIED
Page 1 of 7
COMPLIED
Output voltage is
regulated and
controlled overvoltage dividerat
the output
COMPLIED
47 Hz - 63 Hz
COMPLIED
The voltage applied to the electrodes of the liquid filled cell shall
have an approximately sinusoidal waveform, with peak factor of
1.41 0.07 . The waveform shall be demonstrated at the time
of installation and commissioning using necessary display
devices.
COMPLIED
COMPLIED
Page 2 of 7
i) If it is needed to
display the
waveform at the
commissioning of
the unit we need
to use VT 100
100 kV
0.5 kV/s - 10 kV/s
Sl.No. Parameters
5 Short circuit
current
requirement
6 Switching
System
requirements
7 Automation
Page 3 of 7
Quantity
COMPLIED
COMPLIED
COMPLIED
<5 us
Sl.No. Parameters
8 Selectable
programs
9 Quantity of
sample
10 Electrode
requirements
11 Repeatability
Repeatability and Reproducibility clause to meet the
and
requirements of all applicable national and international
reproducibility standards
Page 4 of 7
COMPLIED
COMPLIED
COMPLIED
COMPLIED
Sl.No. Parameters
12 Calibrator
13 Mandatory
Spares
14 Optional
Requirements
a) Shall have Reliable and heavy duty door closure for the cell
compartment
b) Shall have Provision for Automatic draining and loading of
the sample to test cell
c) Shall have provision for increasing the current limiting value
using user selection modes during specific works like
calibration and testing of samples with higher leakage current
15 Power supply
16 Environmental
conditions
17 Scope of
purchase
18 Warranty
Extended
Warranty
GENERAL REQUIREMENTS
Power supply requirement: 230 10 % V AC , 50 5 % Hz
The equipment should effectively function from ambient
temperature to 50C & RH between 10 - 90 %
Supply, Installation and Commissioning at CPRI- Bangalore and
at other identified units of CPRI
Warranty for 1 year from the date of Successful installation,
commissioning and performation demonstration of equipment
at CPRI
Extended warranty for a period of 3 years after completion of
the Initial warranty period
Page 5 of 7
Quantity
COMPLIED
Included
COMPLIED
COMPLIED
COMPLIED
COMPLIED
COMPLIED
COMPLIED
COMPLIED
COMPLIED
a) Complied
b) Cell is filled
manually
ii) Changing of
current threshold
is not needed for
calibration
Sl.No. Parameters
19 Instruction
Manual
20 Personnel
Training
21 Installation
infrastructure
22 Documentary
evidence
Page 6 of 7
Quantity
COMPLIED
COMPLIED
COMPLIED
COMPLIED
COMPLIED
COMPLIED
COMPLIED
COMPLIED
COMPLIED
On additional
charges
Sl.No.
Parameters
Quantity
COMPLIED
PN : 1. A detailed technical catalogue/literature/phamplet and any other technical details shall be sent in hard copy in a sealed cover super scribing tender enquiry number and due
date so as to reach the following address within the due date and time. This is very much essential to evaluate your offer.
2. Letter of authorization issued by the foreign Principal shall also be sent by the Indian agents who have offered on behalf of their Principals.
Page 7 of 7