This document provides instructions for impact testing a Charpy/Izod sample using a pendulum hammer or striker. The procedure involves raising the hammer, placing a safety block, positioning the notched sample opposite the striker, setting the pendulum to 120 degrees, releasing the safety block and level handle, recording the angle, and referring to an energy value table.
This document provides instructions for impact testing a Charpy/Izod sample using a pendulum hammer or striker. The procedure involves raising the hammer, placing a safety block, positioning the notched sample opposite the striker, setting the pendulum to 120 degrees, releasing the safety block and level handle, recording the angle, and referring to an energy value table.
This document provides instructions for impact testing a Charpy/Izod sample using a pendulum hammer or striker. The procedure involves raising the hammer, placing a safety block, positioning the notched sample opposite the striker, setting the pendulum to 120 degrees, releasing the safety block and level handle, recording the angle, and referring to an energy value table.
2. PUT SAFETY BLOCK 3. PLACE SAMPLE IN POSITION CHARPY ( NOTCHING OPPOSE TO STRIKER ) 4. TURN THE HAND WHEEL TO 120 5. RELEASE SAFETY BLOCK 6. RELEASE LEVEL HANDLE 7. RECORD THE ANGLE 8. REFER ENERGY VALUE TABLE