Professional Documents
Culture Documents
BTS3900A Product Description
BTS3900A Product Description
V400R006C08
Product Description
Issue
11
Date
2010-06-18
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 11 (2010-06-18)
Product Version
The following table lists the product version related to this document.
Product
Version
BTS3900A CDMA
V400R006C08
Intended Audience
This document is intended for:
l
Field engineers
System engineers
Change History
Version
Change History
11 (2010-06-18)
Issue 11 (2010-06-18)
iii
Version
Change History
10 (2010-03-18)
09 (2009-09-15)
08 (2009-08-30)
07 (2009-08-15)
06 (2009-07-07)
05 (2009-05-30)
04 (2009-04-01)
03(2008-12-25)
02 (2008-08-10)
01(2008-06-25)
Organization
1 General Structure of the BTS
This chapter describes the general structure of the BTS in terms of the physical structure, logical
structure, and software structure.
2 Configuration Types of the BTS
The BTS3900A supports CDMA2000 1X services, CDMA2000 EV-DO services, and
CDMA2000 1X and CDMA2000 EV-DO hybrid services.
3 Power Distribution Modes of the BTS
The BTS3900A supports 220 V AC single-phase input, 220 V AC three-phase input, and 110
V AC dual-live wire input. An appropriate power input mode should be chosen according to the
configuration of the power distribution units for the cabinet.
4 Clock Synchronization Modes of the BTS
The BTS supports various clock sources such as the GPS/GLONASS clock source, the RGPS
interface clock source, and the transmission clock source based on 1588 V2.
5 Transmission and Networking of the BTS
iv
Issue 11 (2010-06-18)
This chapter describes the transmission and networking of the BTS. The networking modes
supported by the BTS include the star networking mode, chain networking mode, and tree
networking mode.
6 Operation and Maintenance of the BTS
This section describes the operation and maintenance of the BTS. The operation and maintenance
of the BTS refers to the management, monitoring, and maintenance of the BTS. The BTS
provides various methods and platforms for operation and maintenance to cater to different
scenarios.
7 Technical Specifications of the BTS
This chapter describes the technical specifications of the BTS3900A.
Conventions
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Indicates a hazard with a high level of risk, which if not
avoided,will result in death or serious injury.
Indicates a hazard with a medium or low level of risk, which
if not avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation, which if not
avoided,could result in equipment damage, data loss,
performance degradation, or unexpected results.
Indicates a tip that may help you solve a problem or save
time.
Provides additional information to emphasize or supplement
important points of the main text.
General Conventions
The general conventions that may be found in this document are defined as follows.
Issue 11 (2010-06-18)
Convention
Description
Boldface
Italic
Courier New
Command Conventions
The command conventions that may be found in this document are defined as follows.
Convention
Description
Boldface
Italic
[]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... }*
[ x | y | ... ]*
GUI Conventions
The GUI conventions that may be found in this document are defined as follows.
Convention
Description
Boldface
>
Keyboard Operations
The keyboard operations that may be found in this document are defined as follows.
vi
Format
Description
Key
Press the key. For example, press Enter and press Tab.
Key 1+Key 2
Key 1, Key 2
Issue 11 (2010-06-18)
Mouse Operations
The mouse operations that may be found in this document are defined as follows.
Issue 11 (2010-06-18)
Action
Description
Click
Double-click
Drag
Press and hold the primary mouse button and move the
pointer to a certain position.
vii
Contents
Contents
About This Document...................................................................................................................iii
1 General Structure of the BTS...................................................................................................1-1
1.1 Physical Structure of the BTS (Breathable Film)............................................................................................1-2
1.1.1 Exterior of the BTS Cabinet...................................................................................................................1-2
1.1.2 Structure of the BTS Cabinet.................................................................................................................1-3
1.1.3 Configuration of the BTS Cabinet......................................................................................................... 1-6
1.2 Physical Structure of the BTS (Heat Exchange).............................................................................................1-9
1.2.1 Exterior of the BTS Cabinet...................................................................................................................1-9
1.2.2 Structure of the BTS Cabinet...............................................................................................................1-12
1.2.3 Configuration of the BTS Cabinet.......................................................................................................1-17
1.3 Physical Structure of the BTS (II Type)........................................................................................................1-19
1.3.1 Exterior of the BTS Cabinet.................................................................................................................1-20
1.3.2 Structure of the BTS Cabinet ..............................................................................................................1-20
1.3.3 Configuration of the BTS Cabinet.......................................................................................................1-25
1.4 Logical Structure of the BTS........................................................................................................................1-29
1.5 Software Structure of the BTS......................................................................................................................1-30
ix
Contents
Issue 11 (2010-06-18)
Figures
Figures
Figure 1-1 Exterior of the BTS3900A main cabinets...........................................................................................1-2
Figure 1-2 Exterior of the transmission cabinet...................................................................................................1-3
Figure 1-3 Exterior of the battery cabinet............................................................................................................ 1-3
Figure 1-4 Internal structure of the BTS3900A main cabinets............................................................................ 1-4
Figure 1-5 Internal structure of the BTS3900A auxiliary cabinets......................................................................1-5
Figure 1-6 Configuration of the cabinet (1)......................................................................................................... 1-7
Figure 1-7 Configuration of the cabinet (2)......................................................................................................... 1-8
Figure 1-8 Exterior of the BTS3900A main cabinets.........................................................................................1-10
Figure 1-9 Exterior of the transmission cabinet.................................................................................................1-11
Figure 1-10 Exterior of the BBC........................................................................................................................1-11
Figure 1-11 Exterior of the IBBS200T...............................................................................................................1-11
Figure 1-12 Internal structure of the main cabinet.............................................................................................1-13
Figure 1-13 Internal structure of the auxiliary cabinet (for the IBBS200T)......................................................1-15
Figure 1-14 Internal structure of the BBC..........................................................................................................1-16
Figure 1-15 Configuration of the cabinet (1).....................................................................................................1-17
Figure 1-16 Configuration of the cabinet (2).....................................................................................................1-18
Figure 1-17 BTS3900A cabinets........................................................................................................................1-20
Figure 1-18 Internal structure of the main cabinet (APM30H) .........................................................................1-21
Figure 1-19 Internal structure of the main cabinet (RFC) .................................................................................1-22
Figure 1-20 Internal structure of the auxiliary cabinet (IBBS200D) ................................................................1-23
Figure 1-21 Internal structure of the auxiliary cabinet (IBBS200T) .................................................................1-24
Figure 1-22 Internal structure of the auxiliary cabinet (TMC11H) ...................................................................1-25
Figure 1-23 Typical configuration of the BTS3900A cabinet (I).......................................................................1-26
Figure 1-24 Typical configuration of the BTS3900A cabinet (II).....................................................................1-26
Figure 1-25 Typical configuration of the BTS3900A cabinet (III)....................................................................1-27
Figure 1-26 Logical structure of the BTS3900A................................................................................................1-29
Figure 1-27 Software structure of the BTS........................................................................................................1-30
Figure 3-1 Power distribution principle of the BTS3900A..................................................................................3-1
Figure 5-1 Star networking mode.........................................................................................................................5-2
Figure 5-2 Chain networking mode......................................................................................................................5-3
Figure 5-3 Tree networking mode........................................................................................................................5-4
Figure 6-1 Networking of the operation and maintenance system.......................................................................6-2
Issue 11 (2010-06-18)
xi
Tables
Tables
Table 1-1 Components of the BTS3900A............................................................................................................1-6
Table 1-2 Configuration.......................................................................................................................................1-8
Table 1-3 Components of the BTS3900A..........................................................................................................1-16
Table 1-4 Configuration.....................................................................................................................................1-18
Table 1-5 List of BTS3900A components..........................................................................................................1-27
Table 4-1 Clock synchronization modes supported by the BTS..........................................................................4-1
Table 7-1 Transmitter specifications in band class 0 (800 MHz).........................................................................7-2
Table 7-2 Receiver specifications in band class 0 (800 MHz).............................................................................7-2
Table 7-3 Transmitter specifications in band class 1 (1900 MHz).......................................................................7-3
Table 7-4 Receiver specifications in band class 1 (1900 MHz)...........................................................................7-3
Table 7-5 Transmitter specifications in band class 14 (1900 MHz).....................................................................7-3
Table 7-6 Receiver specifications in band class 14 (1900 MHz).........................................................................7-4
Table 7-7 Transmitter specifications in band class 15 (AWS).............................................................................7-4
Table 7-8 Receiver specifications in band class 15 (AWS).................................................................................7-4
Table 7-9 RRU cascading specifications of the BTS...........................................................................................7-5
Table 7-10 BER threshold specifications of the BTS on transmission links........................................................7-5
Table 7-11 Technical specifications of the BTS3900A (breathable film) cabinet...............................................7-5
Table 7-12 Technical specifications of the BTS3900A (Heat Exchange) cabinet...............................................7-6
Table 7-13 Technical specifications of the BTS3900A (II Type) cabinet............................................................7-8
Table 7-14 Reliability specifications of the BTS.................................................................................................7-9
Table 7-15 Surge protection specifications of the BTS3900A...........................................................................7-10
Table 7-16 Climatic requirements for the storage environment of the equipment.............................................7-11
Table 7-17 Requirements for the density of mechanically active substances in the storage environment of the
equipment............................................................................................................................................................7-12
Table 7-18 Requirements for the density of chemically active substances in the storage environment of the
equipment............................................................................................................................................................7-13
Table 7-19 Mechanical stress requirements for the storage environment of the equipment..............................7-13
Table 7-20 Climatic requirements for the transportation environment of the equipment..................................7-14
Table 7-21 Requirements for the density of mechanically active substances in the transportation environment of
the equipment......................................................................................................................................................7-15
Table 7-22 Requirements for the density of chemically active substances in the transportation environment of the
equipment............................................................................................................................................................7-15
Table 7-23 Mechanical stress requirements for the transportation environment of the equipment...................7-16
Table 7-24 Climatic requirements for the running environment of the equipment............................................7-17
Issue 11 (2010-06-18)
xiii
Tables
xiv
Issue 11 (2010-06-18)
Issue 11 (2010-06-18)
1-1
Exterior
The BTS3900A consists of main cabinets and auxiliary cabinets.
l
The main cabinets are power cabinet (mandatory) and RF cabinet (mandatory).
The auxiliary cabinets are transmission cabinet (optional) and battery cabinet (optional).
As shown in Figure 1-1, the upper cabinet is the power cabinet, and the lower one is the RF
cabinet.
Figure 1-1 Exterior of the BTS3900A main cabinets
1-2
Issue 11 (2010-06-18)
Figure 1-2 and Figure 1-3 show the transmission cabinet and battery cabinet, respectively.
Figure 1-2 Exterior of the transmission cabinet
Dimensions
The dimensions of the cabinet are as follows:
l
Power cabinet: Height x width x depth = 700 mm (27.56 in.) x 600 mm (23.62 in.) x 480
mm (18.90 in.)
RF cabinet: Height x width x depth = 700 mm (27.56 in.) x 600 mm (23.62 in.) x 480 mm
(18.90 in.)
Transmission cabinet: Height x width x depth = 700 mm (27.56 in.) x 600 mm (23.62 in.)
x 480 mm (18.90 in.)
Battery cabinet: Length x width x depth = 700 mm (27.56 in.) x 600 mm (23.62 in.) x 480
mm (18.90 in.)
1-3
Figure 1-4 shows the internal structure of the BTS3900A main cabinets.
Figure 1-4 Internal structure of the BTS3900A main cabinets
(1) PMU
(2) APMI
(3) AFMU
(4) PSUAC/DC
(5) PDU
(6) BBU3900
(7) DCDU-02
(8) FMUA
(9) FAN
(10) CRFU
NOTE
Figure 1-5 shows the internal structure of the BTS3900A auxiliary cabinets.
1-4
Issue 11 (2010-06-18)
(1) APMI
(2) AFMU
(3) DCDU-03A
(4) Batteries
Issue 11 (2010-06-18)
1-5
Full Name
APMI
PMU
AFMU
PSUAC/DC
PDU
BBU3900
Baseband Unit
DCDU
FMUA
FAN
Fan Unit
CRFU
SLPU
EMUA (optional)
1-6
Issue 11 (2010-06-18)
(2) RF cabinet
NOTE
At the bottom of the power cabinet, there is 5 U free space for housing the SLPU (1 U), EMUA (1 U), or
batteries (3 U).
Figure 1-7 shows the BTS3900A configured with the transmission cabinet and battery cabinet.
Issue 11 (2010-06-18)
1-7
(4) RF cabinet
Table 1-2 describes the boards and modules configured in the cabinet.
Table 1-2 Configuration
1-8
Component
Configuration
BBU3900
CRFU
DCDU
Issue 11 (2010-06-18)
Component
Configuration
FAN
The FAN is the fan unit of the RF cabinet. It dissipates heat for the RF
cabinet and supports the temperature detection function.
FMUA
PDU
PMU
PSUAC/DC
SLPU
The SLPU is the surge protection unit of the BTS3900A. It houses the
UELP and UFLP, provides E1/T1 signals for the BTS3900A, and
protects FE signals against lightning.
APMI
AFMU
The AFMU is the APM30 fan monitoring unit interface board. It reports
alarm signals of internal environment temperature sensor, air inlet
temperature sensor, and air outlet temperature sensor.
EMUA (optional)
1-9
Exterior
The BTS3900A consists of main cabinets and auxiliary cabinets.
l
The main cabinets are the power cabinet (mandatory) and RF cabinet (mandatory).
The auxiliary cabinets are transmission cabinet (optional) and battery cabinet (optional).
The battery cabinet has two types: IBBS200T and BBC.
As shown in Figure 1-8, the upper cabinet is the power cabinet, and the lower one is the RF
cabinet.
Figure 1-8 Exterior of the BTS3900A main cabinets
Figure 1-9, Figure 1-10, and Figure 1-11 show the transmission cabinet, BBC, and IBBS200T
respectively.
1-10
Issue 11 (2010-06-18)
Issue 11 (2010-06-18)
1-11
Dimensions
The dimensions of the cabinet are as follows:
l
Power cabinet: Height x width x depth = 700 mm (27.56 in.) x 600 mm (23.62 in.) x 480
mm (18.90 in.)
RF cabinet: Height x width x depth = 700 mm (27.56 in.) x 600 mm (23.62 in.) x 480 mm
(18.90 in.)
Transmission cabinet: Height x width x depth = 700 mm (27.56 in.) x 600 mm (23.62 in.)
x 480 mm (18.90 in.)
BBC: Height x width x depth = 700 mm (27.56 in.) x 600 mm (23.62 in.) x 480 mm (18.90
in.)
IBBS200T: Height x width x depth = 700 mm (27.56 in.) x 600 mm (23.62 in.) x 480 mm
(18.90 in.)
NOTE
The depth of the TEC cooler hood stretching out of the IBBS200T is 200 mm (7.87 in.).
1-12
Issue 11 (2010-06-18)
(1) HPMI
(2) HEUA
(3) PSUAC/DC
(4) PDU
(5) BBU3900
(6) DCDU-02
(7) FAN
(8) CRFU
(9) FMUA
(10) PMU
Issue 11 (2010-06-18)
1-13
The SLPU and the EMUA are optional for the power cabinet.
Figure 1-13 shows the internal structure of the auxiliary cabinet when the IBBS200T is
configured.
1-14
Issue 11 (2010-06-18)
Figure 1-13 Internal structure of the auxiliary cabinet (for the IBBS200T)
(1) HEUA
(2) DCDU-03A
(3) Batteries
(4) FM-BOX
Issue 11 (2010-06-18)
1-15
1-16
Module
Full Name
HEUA
HPMI
PMU
PSUAC/DC
PDU
BBU3900
Baseband Unit
DCDU
FMUA
Issue 11 (2010-06-18)
Module
Full Name
FAN
Fan Unit
CRFU
SLPU
EMUA (optional)
Issue 11 (2010-06-18)
(2) RF cabinet
1-17
At the bottom of the power cabinet, there is 5 U free space for housing the SLPU (1 U) and EMUA (1 U).
Figure 1-16 shows the BTS3900A configured with the transmission cabinet and battery cabinet.
Figure 1-16 Configuration of the cabinet (2)
(4) RF cabinet
Table 1-4 describes the boards and modules configured in the cabinet.
Table 1-4 Configuration
1-18
Component
Configuration
BBU3900
Issue 11 (2010-06-18)
Component
Configuration
CRFU
DCDU
FAN
The FAN is the fan unit of the BTS3900A RF cabinet. It dissipates heat
for the BTS3900A RF cabinet and supports temperature monitoring
function.
FMUA
PDU
PMU
PSUAC/DC
SLPU
The SLPU is the protection unit of the BTS3900A. It houses the UELP
and UFLP, provides E1/T1 signals for the BTS3900A, and protects FE
signals against lightning.
EMUA (optional)
HEUA
HPMI
The HPMI provides the input and output ports for alarm signals.
Issue 11 (2010-06-18)
1-19
1-20
Issue 11 (2010-06-18)
(1) HPMI
(3) CMUA
(4) PSU
(6) ELU
(7) EPS
(11) PMU
Issue 11 (2010-06-18)
1-21
(1) DCDU-02
(2) FAN
(3) CRFU
Figure 1-20, Figure 1-21, and Figure 1-22 show the internal structures of the auxiliary cabinets.
1-22
Issue 11 (2010-06-18)
(1) Fan
(2) CMUA
(3) ELU
Issue 11 (2010-06-18)
1-23
(1) TEC
1-24
(2) CMUA
(4) Circuit breakers of the TEC/Fan (5) Circuit breakers of the lowerlevel battery group
Issue 11 (2010-06-18)
(2) CMUA
(3) DCDU-03
(4) ELU
The main components of the APM30H are the power system (AC/DC), BBU3900, and fan
box.
The main components of the RFC are the DCDU-01 module, RFU, and fan box.
Optional equipment TMC11H can be configured to provide installation space for external
transmission equipment.
Figure 1-23, Figure 1-24, and Figure 1-25 show the typical configurations of BTS3900A
cabinets.
Issue 11 (2010-06-18)
1-25
1-26
Issue 11 (2010-06-18)
NOTE
For details on the structure of the APM30H, TMC11H, and IBBS200D/IBBS200T, see the
APM30H&TMC11H&IBBS200D/T User Guide.
Issue 11 (2010-06-18)
Cabinet
Type
Module or
Board
Optional or
Mandatory
Maximum
Number of
Boards or
Modules
Configured in
a Single
Cabinet
Description
APM30H
Fan box
Mandatory
PMU
Mandatory
It is the power
monitoring unit.
PSU (AC/DC)
Mandatory
It is the power
supply unit.
1-27
Cabinet
Type
RFC
1-28
Module or
Board
Optional or
Mandatory
Maximum
Number of
Boards or
Modules
Configured in
a Single
Cabinet
Description
BBU3900
Mandatory
It is the mandatory
component in the
APM30H cabinet
and installed in the 2
U space below the
power system.
SLPU
Mandatory
It integrates the
UELP and UFLP.
EMUA
Optional
Heater
Optional
It is optional and
configured in the
APM30H or
TMC11H.
Maintenance
socket (SOU)
Optional
It is installed in the 1
U space at the lower
part of the cabinet
according to the
customer
requirements.
DCDU-01
Mandatory
FAN box
Mandatory
CRFU
Mandatory
It is the BTS3900A
radio frequency unit.
Issue 11 (2010-06-18)
NOTE
For details on the board configuration of the BBU3900, see the BBU3900 User Guide.
Baseband System
The baseband system consists of BBU3900s and performs the following functions:
l
Providing the physical port for data exchange between the BTS and the BSC
RF System
The RF system consists of CRFUs and performs the following functions:
l
On the forward links, implementing up-conversion and power amplification for modulated
transmitted signals and filtering the transmitted signals to make them meet the requirements
of the Um interface protocol
On the reverse link, filtering the signals received by the antenna to suppress out-band
interference and performing low noise amplification, channel division, down-conversion,
and channel-selective filtering
Issue 11 (2010-06-18)
1-29
Antenna System
The antenna system consists of the RF antenna system and satellite antenna system.
The antenna system performs the following functions:
l
RF antenna system
The RF antenna system transmits modulated RF signals and receives the signals from the
MSs.
Platform Software
The major functions of the platform software are as follows:
1-30
Issue 11 (2010-06-18)
Timing management
Task management
Memory management
Data Center
The data center stores the configuration data of each module.
Managing the internal logical resources of the BTS, for example, cells and channels, and
implementing mapping between physical resources and logical resources
Equipment management
Data configuration
Performance management
Commissioning management
Alarm management
Software management
Tracing management
Security management
Backup management
Log management
Issue 11 (2010-06-18)
1-31
The following typical configurations are for reference only. The detailed configuration of a site should
be based on the actual situation.
When the BBU requires the UBRI, install it in slot 3 of the BBU.
Number of
HCPMs
Number of
CMPTs
Number of CRFUs
O(1)
S(2/2/2)
S(4/4/4)
S(8/8/8)
Issue 11 (2010-06-18)
Configuration
Mode
Number of
HECMs
Number of
CMPTs
Number of CRFUs
O(1)
S(2/2/2)
S(4/4/4)
S(8/8/8)
2-1
2-2
Number of
HCPMs
Number of
HECMs
Number of
CMPTs
Number of
CRFUs
1X
EV-DO
S(1/1/1)
S(1/1/1)
S(2/2/2)
S(1/1/1)
S(1/1/1)
S(3/3/3)
Issue 11 (2010-06-18)
The BTS3900A supports 220 V AC single-phase input, 220 V AC three-phase input, and 110
V AC dual-live wire input. An appropriate power input mode should be chosen according to the
configuration of the power distribution units for the cabinet.
Figure 3-1 shows the power distribution principle of the BTS3900A.
Figure 3-1 Power distribution principle of the BTS3900A
2.
Issue 11 (2010-06-18)
3-1
3-2
3.
The PSUAC/DC converts the AC power supply into -48 V DC power supply and sends it
back to the PDU.
4.
Providing DC power supply for the DCDU, which performs power distribution for the
power-consuming components.
Issue 11 (2010-06-18)
Issue 11 (2010-06-18)
Clock
Synchronization
Mode
Description
GPS/GLONASS
clock
The BTS provides the GPS/GLONASS clock signal input port and
obtains clock signals through the external GPS/GLONASS
equipment.
RGPS clock
The BTS provides the RGPS port and obtains clock signals through
the external RGPS equipment.
Transmission clock
based on 1588 V2
4-1
Issue 11 (2010-06-18)
5-1
Application Scenarios
As the most commonly used networking mode, the star networking mode is especially applicable
to densely populated areas.
Figure 5-1 shows the star networking mode.
Figure 5-1 Star networking mode
Advantages
l
The BTS is directly connected to the BSC, thus guaranteeing simplicity in networking and
convenience in engineering, maintenance, and capacity expansion.
Data transmission is implemented directly between the BTS and the BSC, and therefore
signals do not have to go through many nodes. In this way, the reliability of the line is high.
Disadvantages
The star networking modes require more transmission resources than other networking modes.
5-2
Issue 11 (2010-06-18)
Application Scenarios
The chain networking mode is applicable to sparsely populated strip areas, for example, areas
along superhighways and railways.
Figure 5-2 shows the chain networking mode.
Figure 5-2 Chain networking mode
Advantages
The chain networking mode helps reduce the costs of transmission equipment, of engineering
construction, and of transmission link rental.
Disadvantages
l
Signals go through a large number of nodes, and therefore the line reliability is low.
Faults in upper-level BTSs may affect the normal operation of lower-level BTSs.
Application Scenarios
The tree networking mode is applicable to areas where network structures, site distribution, and
subscriber distribution are complicated, for example, areas where subscribers are widely
distributed and hot spots gather.
Figure 5-3 shows the tree networking mode.
Issue 11 (2010-06-18)
5-3
Advantages
The advantage of the tree networking mode over the star networking mode is that the former
lowers the costs of the transmission equipment, the costs of engineering projects, and the rental
of transmission links.
Disadvantages
5-4
Signals travel through many nodes, which cause low transmission reliability and
construction and maintenance difficulties.
Faults in upper-level BTSs may affect the normal operation of lower-level BTSs.
Issue 11 (2010-06-18)
Issue 11 (2010-06-18)
6-1
6-2
Maintenance through the centralized network management system: The M2000, Huawei's
centralized management system for wireless networks, can be used to maintain BTSs
through the operation and maintenance network. The M2000 supports the operation and
maintenance of sites, cells, carriers, channels, and boards. Centralized network
management is used for the maintenance of multiple BTSs.
Maintenance through the LMT: The LMT can be used to maintain the BTS through the
operation and maintenance link provided by the Abis interface between the BSC and the
BTS. The LMT communicates with the BSC through a LAN. Through the LMT, you can
perform operation and maintenance for the sites, cells, carriers, channels, and boards. The
LMT is used to configure and adjust the data of the BSC and BTS.
Local maintenance: The maintenance terminal of the BTS is used to maintain the BTS
locally through Ethernet. Through the maintenance terminal of the BTS, you can perform
operation and maintenance for the sites, cells, carriers, baseband, channels, and boards. The
maintenance terminal is used to maintain single BTS.
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
Issue 11 (2010-06-18)
Equipment Management
Equipment management refers to equipment maintenance and data configuration. The detailed
functions are as follows:
l
Software Management
The functions involved in software management are as follows:
l
Software activation
Configuration Management
The functions involved in configuration management are as follows:
l
Consistency checks for added, deleted, and Changed data of the BTS
Dynamic and static modes for data configuration. In dynamic mode, changes made to data
take effect immediately. In static mode, changes made to data take effect after the BTS is
reset.
Service Management
The functions involved in service management are as follows:
l
The BTS provides the boards and environment monitoring device with OM functions such
as parameter configuration and alarm querying.
Performance Management
The functions involved in performance management are as follows:
l
Issue 11 (2010-06-18)
The system monitors the performance of the internal and external communication network.
Alarms are generated when the performance becomes poor.
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
6-3
The system monitors traffic on each port and collects technical data of each port.
The system supports the monitoring of the usage of key components such as the CPU.
Security Management
Security management involves functions such as connection management between the BTS
software and the OMC, subscriber authentication, and bi-directional resolution of encryption
and interface messages.
Alarm Management
Alarm management involves equipment alarm management and environment alarm
management.
l
Alarm detection
Alarm reporting
Alarm masking
Alarm acknowledgement
Alarm pre-processing
Environment Monitoring
The BTS supports comprehensive environment monitoring functions.
6-4
Issue 11 (2010-06-18)
Issue 11 (2010-06-18)
7-1
The transmit power is the maximum value measured at the RF port of the cabinet.
The multi-carrier transmit power refers to the total power instead of the power of each carrier.
The signal receive sensitivity is the main and diversity receive sensitivity at RC3.
Specification
Working frequency
band
Channel bandwidth
1.2288 MHz
Channel precision
30 kHz
Frequency tolerance
0.05 ppm
Transmit power
100 W
Item
Specification
Working frequency
band
Channel bandwidth
1.2288 MHz
Channel precision
30 kHz
Signal receiving
sensitivity
7-2
Issue 11 (2010-06-18)
Specification
Working frequency
band
Channel bandwidth
1.2288 MHz
Channel precision
50 kHz
Frequency tolerance
0.05 ppm
Transmit power
80 W
Item
Specification
Working frequency
band
Channel bandwidth
1.2288 MHz
Channel precision
50 kHz
Signal receiving
sensitivity
Issue 11 (2010-06-18)
Item
Specification
Working frequency
band
Channel bandwidth
1.2288 MHz
Channel precision
50 kHz
Frequency tolerance
0.05 ppm
Transmit power
80 W
7-3
Item
Specification
Working frequency
band
Channel bandwidth
1.2288 MHz
Channel precision
50 kHz
Signal receiving
sensitivity
Specification
Working frequency
band
Channel bandwidth
1.2288 MHz
Channel precision
50 kHz
Frequency tolerance
0.05 ppm
Transmit power
80 W
Specification
Working frequency
band
Channel bandwidth
1.2288 MHz
Channel precision
50 kHz
Signal receiving
sensitivity
7-4
Issue 11 (2010-06-18)
Specification
70 km [43.5 mi]
Three
90 km [55.92 mi]
2 x 10e-5
Packet services
2 x 10e-6
Maintenance function
5 x 10e-5
Specification
Input voltage
Issue 11 (2010-06-18)
Dimensions
(height x width
x depth):
Weight
Power cabinet: 700 mm (27.56 in.) x 600 mm (23.62 in.) x 480 mm (18.90
in.)
7-5
Item
Specification
Power
consumption
Configuration
Frequency class
Input voltage
Maximum
power
consumption
S(1/1/1)
800 MHz
220 V AC
705 W
S(2/2/2)
800 MHz
220 V AC
1020 W
S(3/3/3)
800 MHz
220 V AC
1315 W
S(4/4/4)
800 MHz
220 V AC
1510 W
S(2/2/2)
AWS
110V AC
950 W
S(4/4/4)
AWS
110V AC
1580 W
NOTE
l The maximum power consumption does not include the power consumption of
the transmission equipment, of the battery cabinet, and of the battery charge in
the power cabinet.
l The maximum power consumption varies with different operating frequency
Ambient
temperature for
running
Relative
humidity for
running
5% RH to 100% RH
Noise
65 dBA
Specification
Input voltage
7-6
Issue 11 (2010-06-18)
Item
Specification
Weight
Configuration
Maximum power
consumption for typical
configuration
S(4/4/4)
1510 W
NOTE
l The power consumption above is the maximum power
Issue 11 (2010-06-18)
5% RH to 100% RH
NOTE
When the ambient temperature is below -20C (-4F), a heating box
is necessary. The working temperature of the heating box is the lowest
daily average temperature in the month with the lowest monthly
average temperature in the local area.
7-7
Item
Specification
Noise
65 dBA
Specification
Input voltage
Dimensions (length
x width x depth):
Weight
7-8
Configuration
S(4/4/4)
1510 W
Issue 11 (2010-06-18)
measured when the system working at 800 MHz in typical configuration uses
220 V AC power supply.
l The maximum power consumption does not include the power consumption
Ambient
temperature for
system running
Relative humidity
for system running
5% RH to 100% RH
Noise
65 dBA
NOTE
When the ambient temperature is below -20C (-4F), a heating box is necessary.
The working temperature of the heating box is the lowest daily average
temperature in the month with the lowest monthly average temperature in the
local area.
Specifications
Availability
99.999%
100,000 hours
1 hour
Issue 11 (2010-06-18)
7-9
Specification
ETSI EN 301489-1/26
ETSI EN 301908-1/5
ITU-R SM.329-10
7-10
Issue 11 (2010-06-18)
Climatic Requirements
Table 7-16 lists the climatic requirements for the storage environment of the equipment.
Table 7-16 Climatic requirements for the storage environment of the equipment
Issue 11 (2010-06-18)
Item
Range
Temperature
1C/min
Relative humidity
5% RH to 100% RH
Air pressure
Solar radiation
1120 W/m2
Thermal radiation
600 W/m2
7-11
Item
Range
Wind speed
50 m/s
Waterproofing Requirements
The waterproofing requirements for the storage environment of the equipment are as follows:
l
You are advised to store the equipment indoors and ensure that:
No water accumulates on the ground or may drop onto the package of the equipment.
The equipment is kept away from devices that may leak water, for example, automatic
fire-fighting devices and heating devices.
Appropriate waterproofing measures are taken to prevent rainwater from entering the
package.
No water accumulates on the ground or may drop onto the package of the equipment.
Biological Requirements
The biological requirements for the storage environment of the equipment are as follows:
l
The air is free from explosive, electroconductive, magnetoconductive, and corrosive dust.
The density of mechanically active substances complies with the requirements listed in
Table 7-17.
Table 7-17 Requirements for the density of mechanically active substances in the storage
environment of the equipment
7-12
Mechanically Active
Substance
Unit
Density
Suspended dust
mg/m3
Precipitable dust
mg/m2h
500
Grit
mg/m3
300
Issue 11 (2010-06-18)
Mechanically Active
Substance
Unit
Density
NOTE
l The diameter of a suspended dust particle is not greater than 75 m.
l The diameter of a precipitable dust particle is not smaller than 75 m and not greater than 150
m.
l The diameter of a piece of grit is not smaller than 150 m and not greater than 1000 m.
The density of chemically active substances complies with the requirements listed in Table
7-18.
Table 7-18 Requirements for the density of chemically active substances in the storage
environment of the equipment
Chemically Active
Substance
Unit
Density
SO2
mg/m3
0.30
H2S
mg/m3
0.10
NO2
mg/m3
0.05
NH3
mg/m3
1.00
Cl2
mg/m3
0.10
HCl
mg/m3
0.10
HF
mg/m3
0.01
O3
mg/m3
0.05
Sub-item
Range
Sinusoidal vibration
Offset
Acceleration
5 m/s2
Frequency range
2 Hz to 9 Hz
9 Hz to 200 Hz
Impact response
spectrum II
250 m/s2
Unsteady impact
Issue 11 (2010-06-18)
7-13
Item
Sub-item
Range
Static payload
5 kPa
NOTE
l The impact response spectrum refers to the maximum acceleration response curve generated by the
equipment under specified impact excitation. Impact response spectrum II means that the duration of
semi-sine impact response spectrum is 6 ms.
l The static payload refers to the capability of the packed equipment to bear the weight from above in
Climatic Requirements
Table 7-20 lists the climatic requirements for the transportation environment of the equipment.
Table 7-20 Climatic requirements for the transportation environment of the equipment
Item
Range
Temperature
3C/min
Relative humidity
5% RH to 100% RH
Air pressure
Solar radiation
1120 W/m2
Thermal radiation
600 W/m2
Wind speed
50 m/s
Waterproofing Requirements
The waterproofing requirements for the transportation environment of the equipment are as
follows:
7-14
Appropriate waterproofing measures are taken to prevent rainwater from entering the
package.
Issue 11 (2010-06-18)
Biological Requirements
The biological requirements for the transportation environment of the equipment are as follows:
l
The air is free from explosive, electroconductive, magnetoconductive, and corrosive dust.
The density of mechanically active substances complies with the requirements listed in
Table 7-21.
Table 7-21 Requirements for the density of mechanically active substances in the
transportation environment of the equipment
Mechanically Active
Substance
Unit
Density
Suspended dust
mg/m3
35
Precipitable dust
mg/m2h
0.2
Grit
mg/m3
30
NOTE
l The diameter of a suspended dust particle is not greater than 75 m.
l The diameter of a precipitable dust particle is not smaller than 75 m and not greater than 150
m.
l The diameter of a piece of grit is not smaller than 150 m and not greater than 1000 m.
The density of chemically active substances complies with the requirements listed in Table
7-22.
Table 7-22 Requirements for the density of chemically active substances in the
transportation environment of the equipment
Issue 11 (2010-06-18)
Chemically Active
Substance
Unit
Density
SO2
mg/m3
0.30
H2S
mg/m3
0.10
NO2
mg/m3
0.05
NH3
mg/m3
1.00
Cl2
mg/m3
0.10
7-15
Chemically Active
Substance
Unit
Density
HCl
mg/m3
0.10
HF
mg/m3
0.01
O3
mg/m3
0.05
Sub-item
Range
Sinusoidal
vibration
Offset
3.5 mm (0.14
in.)
Acceleration
10 m/s2
15 m/s2
Frequency
range
2 Hz to 9 Hz
9 Hz to 200 Hz
200 Hz to 500
Hz
Acceleration
spectral density
30 m2/s3
3 m2/s3
1 m2/s3
Frequency
range
2 Hz to 10 Hz
10 Hz to 200 Hz
200 Hz to 500
Hz
Impact response
spectrum II
250 m/s2
Static payload
10 kPa
Random
vibration
Unsteady
impact
NOTE
l The impact response spectrum refers to the maximum acceleration response curve generated by the
equipment under specified impact excitation. Impact response spectrum II means that the duration of
semi-sine impact response spectrum is 6 ms.
l The static payload refers to the capability of the packed equipment to bear the weight from above in
7-16
Issue 11 (2010-06-18)
Climatic Requirements
Table 7-24 lists the climatic requirements for the running environment of the equipment.
Table 7-24 Climatic requirements for the running environment of the equipment
Item
Range
Temperature
3C/min
Relative humidity
5% RH to 100% RH
Air pressure
Solar radiation
1120 W/m2
Thermal radiation
600 W/m2
Wind speed
67 m/s
NOTE
The temperature and humidity should be measured 1.5 m (4.92 ft) above the ground and 0.4 m (1.31 ft)
away from the front of the cabinet when no protective board is installed at the front and rear of the cabinet.
Biological Requirements
The biological requirements for the running environment of the equipment are as follows:
l
The air is free from explosive, electroconductive, magnetoconductive, and corrosive dust.
The density of mechanically active substances complies with the requirements (for the BBU
only) listed in Table 7-25.
Table 7-25 Requirements for the density of mechanically active substances in the running
environment of the equipment
Mechanically Active
Substance
Unit
Density
Dust particles
Particles/m3
3 x 104
(no visible dust
accumulated on desktops
within three days)
Issue 11 (2010-06-18)
7-17
Mechanically Active
Substance
Unit
Density
The density of chemically active substances complies with the requirements listed in Table
7-26.
Table 7-26 Requirements for the density of chemically active substances in the running
environment of the equipment
Chemically Active
Substance
Unit
Density
SO2
mg/m3
0.30
H2S
mg/m3
0.10
NH3
mg/m3
1.00
Cl2
mg/m3
0.10
HCl
mg/m3
0.10
HF
mg/m3
0.01
O3
mg/m3
0.05
NOx
mg/m3
0.05
Sub-Item
Range
Sinusoidal vibration
Offset
3 mm (0.12 in.)
Acceleration
10.0 m/s2
Frequency range
2 Hz to 9 Hz
9 Hz to 200 Hz
Impact response
spectrum II
250 m/s2
Static payload
Unsteady impact
7-18
Issue 11 (2010-06-18)
Item
Sub-Item
Range
NOTE
l The impact response spectrum refers to the maximum acceleration response curve generated by the
equipment under specified impact excitation. Impact response spectrum II means that the duration of
semi-sine impact response spectrum is 6 ms.
l The static payload refers to the capability of the packed equipment to bear the weight from above in
Issue 11 (2010-06-18)
7-19