Professional Documents
Culture Documents
M34c Power Booster PDF
M34c Power Booster PDF
POWER BOOSTER
TABLE OF CONTENTS
Description and Operation . . . . . . . . . . . . . . . . . .
Power Booster . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostic Information and Procedures . . . . .
Power Booster Functional Check . . . . . . . . . . . .
4C-2
4C-2
4C-3
4C-3
On-Vehicle Service . . . . . . . . . . . . . . . . . . . . . . . . . .
Vacuum Hose and Check Valve . . . . . . . . . . . . .
Power Booster Assembly . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4C-4
4C-4
4C-5
4C-8
4C 2 POWER BOOSTER
vide the power assist. When the brakes are released, atmospheric air is shut off from that side of the diaphragm.
The air is then drawn from the booster through the vacuum check valve by the vacuum source.
Important: If any hydraulic component is removed or
disconnected, it may be necessary to bleed all or part of
the brake system.
POWER BOOSTER 4C 3
D17A301B
4C 4 POWER BOOSTER
REPAIR INSTRUCTIONS
ONVEHICLE SERVICE
VACUUM HOSE AND CHECK VALVE
Removal Procedure
1. Remove the vacuum hose.
D Disconnect the vacuum hose from the intake manifold (1).
D107A501
D17A502A
Installation Procedure
1. Connect the vacuum hose to the power booster.
2. Connect the vacuum hose to the intake manifold.
D107A503
POWER BOOSTER 4C 5
D107A520
D107A521
Installation Procedure
1. Install the power booster with the new cotter pin, clevis pin and nuts.
Tighten
D17A522A
4C 6 POWER BOOSTER
D24C001
D24C002
D107A521
POWER BOOSTER 4C 7
Installation Procedure
1. Install the power booster with the new cotter pin, clevis pin and nuts.
Tighten
2.
D24C003
3.
4.
5.
4C 8 POWER BOOSTER
SPECIFICATIONS
GENERAL SPECIFICATIONS
Application
Type
Diameter
Power Booster
Unit
Description
VacuumSuspended
mm (inch)
177.8 (7)
3.7 : 1
mm (inch)
96(3.78)
Application
NSm
Lb-Ft
Lb-In
16
12
16
12