This document provides sizing calculations for a gas valve for OME International. It specifies a Kimray E1HPPR 3/8" valve with various trim components to regulate gas with a specific gravity of 0.6, flowing at 100 degrees F from an upstream pressure of 450 psig to a downstream pressure of 210 psig at a flow rate of 0.28 MMCF. The valve flow coefficient was calculated as 0.8895 using flow rate and pressure equations listed.
Original Description:
KIM
Original Title
Kimray_valve Sizing Printout for e1hppr IV 30 Hpg Pilot
This document provides sizing calculations for a gas valve for OME International. It specifies a Kimray E1HPPR 3/8" valve with various trim components to regulate gas with a specific gravity of 0.6, flowing at 100 degrees F from an upstream pressure of 450 psig to a downstream pressure of 210 psig at a flow rate of 0.28 MMCF. The valve flow coefficient was calculated as 0.8895 using flow rate and pressure equations listed.
This document provides sizing calculations for a gas valve for OME International. It specifies a Kimray E1HPPR 3/8" valve with various trim components to regulate gas with a specific gravity of 0.6, flowing at 100 degrees F from an upstream pressure of 450 psig to a downstream pressure of 210 psig at a flow rate of 0.28 MMCF. The valve flow coefficient was calculated as 0.8895 using flow rate and pressure equations listed.
Prepared By: Carlos Sandoval Kimray Valve: E1HPPR 3/8" IV / Viton Elastomers / D2 Seat / Carbide Ball / 30 HPG Pilot with Sense Line Protector Trim Size: 3/8" Fluid: GAS Comments:
Gas Specific Gravity (G) = 0.6000
Flowing Temperature (T, Deg F) = 100.0000 Upstream Pressure (Pu, psig) = 450.0000 Downstream Pressure (Pd, psig) = 210.0000 Critical Flow Factor (Cf) = 0.6200 Flow Rate (Q, MMCF) = 0.2800 Valve Flow Coefficient (Cv) = 0.8895 The capacity was derived using the following formula: Flow Rate Equation: Valve Flow Coefficient:
Where:
2 HPMV REGULATOR DIMENSION
BACK PRESSURE AND PRESSURE REDUCING
KIMRAY, Inc.
HIGH PRESSURE REGULATORS
PRESSURE REDUCING REGULATOR 300 psi Maximum Output Pressure
Assembly includes the following equipment:
2 NPT High Pressure Motor Valve with EP Trim DP 400 Drip Pot with Bracket 12 SGR Supply Gas Regulator 30 HPG Pilot