Professional Documents
Culture Documents
Catalogo - Generale - 2016 - ENG Skid SXNC093A16.compressed PDF
Catalogo - Generale - 2016 - ENG Skid SXNC093A16.compressed PDF
Product Catalogue
SIMEX s.r.l. - Italy - 40017 San Giovanni in Persiceto (BO) - via Isaac Newton, 31 - tel. +39. 051. 681 0609
sales@simex.it - apps.simex.it - simex.it
Materials and specifications may vary without prior notice.
Illustrated attachments can be outfitted with equipment and accessories only on request.
SXNC093A16
Contents
PL
T
RW
T 800
T 700
CHD
ST
CT
CB
Self-Levelling Planers.
For planing asphalt and cement in pre-set depths.
Wheel Saws.
For fixed-section trenching.
Wheels Saws.
For fixed-section trenching.
Chain Trenchers.
For cutting and narrow trenching.
Asphalt Pavers.
For laying asphalt and waste materials.
Crusher Buckets.
For reducing the volume of aggregates.
4
12
16
20
22
24
28
30
PL
SELF-LEVELLING
PLANERS
For planing asphalt and cement in pre-set depths.
PATENT
SIMEX
SIMEX
RP
RP
F
F
A
PL
PATENT
SIMEX
Self-levelling system.
PATENT
SIMEX
Slides are always parallel to
the surface; planing depth is always
constant.
Transverse tilt.
Self-levelling to the surface via return
spring system to horizontal position.
Hydraulic position (optional) with possibility
of floating movement.
ATENT
Water Spray Kit with PSIMEX
tank built into frame.
Includes electro-pump, filter and sprayers
(tank also available for positioning on prime
mover). Reduces dust produced during
milling operations..
PATENT
SIMEX
Self-calibrating.
Thanks to the Simex-patented design, the device calibrates itself
according to the maximum pressure of the prime mover carrying the
attachment.
Visually friendly.
Tells the operator how to work with Simex attachments to maximize
power and performance. Positioned where the operator can keep a
constant eye without being distracted from machine operation. Has
different colors and a graphic scale for easy reading.
With Performer, the operator works better, more productively
and faster, and the Simex attachments never lose their
efficiency.
Self-calibrating
Ergonomic position
PL
Use on loader/backhoe
1200 mm width
PL
TECHNICAL SPECIFICATIONS
PL 25.10
PL 35.15
PL 40.15
PL 45.20
PL 55.20
Width
250
350
400
450
550
Depth
0-70
0-110
0-150
0-150
0-150
130
150
170
200
200
Standard drum
Special drums
Max. depth with reduced width
Depth adjustment
Side shift
mech./hydr.*
mech./hydr.*
mech./hydr.*
hydraulic
hydraulic
Transverse tilt
autom*
autom*
autom./hydr.*
autom./hydr.*
Tilt
16 *
16
16
16
350
590
660
790
840
750
820
950
1000
30-60
45-75
65-140
65-140
70-140
240-160
240-160
240-170
300-160
300-160
Kit for mini-loader cab with electric pump or integrated in side shift with electric pump
(*) On request
(1) User is responsible for ensuring that the equipment meets the prime movers specifications and weight requirements.
Conveyor belt - the trench is cleared and the material is discharged to the side
Fine milling - multi-teeth drum for surface texturing or removal of road surface marking.
HIGH POWER PLANERS FOR
MILLING
SCARIFICATION
HIGH DEPTH
STABLIZATION
PL 50.20
PL 60.20
PL 75.20
PL 1000
PL 1200
PL 40.35
PL 60.25
PL 100.25
500
600
750
1000
1200
400
600
1000
mm
0-170
0-170
0-170
0-130
0-130
100-350
0-230
0-230
mm
230
230
230
130
130
350
250
250
mm
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
autom./hydr.*
autom./hydr.*
autom./hydr.*
autom./hydr.*
autom./hydr.*
autom./hydr.*
autom./hydr.*
autom./hydr.*
16
16
16
16
16
16
16
16
900
950
1050
1090
1210
1150
1200
1650
kg
1060
1110
1210
1250
1370
1310
1360
1810
kg
90-160
90-160
110-180
95-200
110-200
90-180
90-160
95-200
l/min
300-160
300-160
300-180
350-180
350-180
320-180
300-180
350-180
BAR
Kit for mini-loader cab with electric pump or integrated in side shift with electric pump
2) Pressure must be inversely proportional to the flow rate available and vice versa.
11
12
WHEEL
SAWS
For fixed-section trenching.
Trench widths
mm
T 300
T 450
T 600
30
50
80
100
130
160
200
Standard
PATENT
On request
SIMEX
13
14
TECHNICAL SPECIFICATIONS
T 300
T 450
T 600
200 - 300
150 - 450
200 - 600
hydraulic
hydraulic
Side shift
hydraulic
hydraulic
hydraulic
Clearing device
on request
on request
on request
665
1115
1340
kg
60 - 140
80 - 160
90 - 160
l/min
300 - 160
300 - 160
300 - 160
BAR
Trench depth
Depth adjustment
(1) User is responsible for ensuring that the equipment meets the prime movers specifications and weight requirements.
(2) Standard wheel and trench clearing device
(3) Pressure must be inversely proportional to the flow rate available and vice versa
mm
15
RW
16
SELF-LEVELLING
WHEEL SAWS
For fixed-section narrow trenching.
PATENT
SIMEX
Trench widths
mm
RW 500
RW 700
50
80
100
130
PATENT
SIMEX
TECHNICAL SPECIFICATIONS
RW 500
RW 700
Trench width
50 - 130
80 - 130
mm
Trench depth
250 - 500
500 - 700
mm
Depth adjustment
hydraulic
hydraulic
Side shift
hydraulic
hydraulic
1150-1250
1440-1570
kg
90 - 160
110 - 160
l/min
300 - 180
300 - 180
BAR
(1) User is responsible for ensuring that the equipment meets the prime movers specifications and weight requirements.
(2) Pressure must be inversely proportional to the flow rate available and vice versa.
17
RW
18
PATENT
SIMEX
Self-levelling system.
PATENT
SIMEX
Variable-width frame.
SIMEX
Frame width varies at front with
changes in wheel width to improve emptying of trench. Edges of
trench remain intact to favor cutting precision.
Quick changes in trench width.
Disk with removable and interchangeable sectors allows for quick
adjustment to trench widths while maintaining the same base disk.
Clean trench.
Special design of outlets allows trench to be cleared efficiently
at the depth programmed. Material is discharged to right and left,
or can be expelled to LH side only by closing RH outlet (useful for
roadside trenching).
19
WHEEL
T 800 SAWS
T 700
20
PATENT
SIMEX
T 700
Can mount wheels with a minimum width of 80 mm up to a
maximum of 200 mm since motor is not integrated into wheel.
T 800
The motor integrated into the wheel is positioned directly into the
trench to increase working depth. Fixed working width: 250 mm.
TECHNICAL SPECIFICATIONS
T 700
T 800
Trench width
80-100-130-160-200
250
mm
Trench depth
500 - 700
450 - 800
mm
Scraper
optional
Depth adjustment
hydraulic
hydraulic
Side shift
hydraulic
hydraulic
1485 - 1635*
1430
kg
110 - 160
110 - 160
l/min
300 - 180
300 - 180
BAR
Operating weight(1)
(1) User is responsible for ensuring that the equipment meets the prime movers specifications and weight requirements.
2) Pressure must be inversely proportional to the flow rate available and vice versa.
(*) With scraper and wheel at maximum width
21
CHD
22
CHAIN
TRENCHERS
Use on excavator
TECHNICAL SPECIFICATIONS
CHD 90
CHD 120
CHD 150
Trench depth
900
1200
1500
mm
150
150
150
mm
200 - 250
200 - 250
200
mm
Side shift
Scraper
mechanical spring-operated
715
780
830
kg
60 - 120
70 - 140
90 - 160
l/min
250 - 180
250 - 180
250 - 180
BAR
(1) User is responsible for ensuring that the equipment meets the prime movers specifications and weight requirements.
(2) Pressure must be inversely proportional to the flow rate available and vice versa.
23
PATENT
ST
24
ASPHALT PAVERS
For laying asphalt and waste materials.
SIMEX
25
ST
Sidewalk paving
Road widening
26
FF
TECHNICAL SPECIFICATIONS
ST 160
ST 200
1500
1900
mm
125
125
mm
1560
1960
mm
1800
2550
mm
1025
1675
mm
1550
1750
mm
hydraulic
Asphalt thickness
0-100
Transverse tilt
Locking device
yes
Side shift
hydraulic
mm
50-120
m/min
610
675
kg
45-200
45-200
l/min - BAR
(1) User is responsible for ensuring that the equipment meets the prime movers specifications and weight requirements
27
CT
28
VIBRATING
COMPACTOR WHEELS
For compacting trench beds.
Wheel width can be adjusted via bolted sectors that are easily
changed on site.
Reverse-rotation
vibrating twin shaft
positioned at center of
the wheel.
Easily replaceable
sectors
for quick adjustment of
compactor wheel width.
TECHNICAL SPECIFICATIONS
CT 2.8 STANDARD
CT 2.8 F.O.
200-250-300-350-400
200-250-300-350-400
mm
0-700
0-700
mm
50-100-150
50-100-150
mm
Working depth
0-350
0-350
mm
Vibration frequency
30-40
30-40
Hz
42
42
kN
mm
Standard wheel
Width of bolted sectors
Working depth
Special wheels
Wheel widths (1)
1100
18
710-770
910-970
kg
40-50
50-70
l/min
150-220
150-220
BAR
29
CB
30
CRUSHER
BUCKETS
For reducing the volume of aggregates.
PATENT
SIMEX
0-30
0-40
0-50
0-70
0-100 0-130
Standard
CB 900
On request
CB 1200
CB 1500
CB 2000
CB 2500
TECHNICAL SPECIFICATIONS
CB 900
CB 1200
CB 1500
CB 2000
CB 2500
Width
1400
1500
1700
1900
2100
mm
0,30
0,45
0,55
0,75
0,80
m3
Rotor width
700
840
965
1100
850
mm
Operating weight-empty
570
760
950
1150
1620
kg
900
1200
1500
2000
2500
kg
40 - 80
70 - 150
70 - 150
70 - 150
120 - 300
l/min
300 - 150
350 - 200
350 - 200
350 - 200
350 - 200
BAR
Number of teeth
31