Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 6

EE 3111 Electronic Circuits

Laboratory
Section 1U2
Lab 7: Operation Amplifiers Part 1
Michael Choi
Jim Yang
Jxy143830

Objective: In this lab we built and simulated basic op-amp


circuits. Circuit configurations tested include inverting, noninverting, differencing, and summing amplifiers.
Data:
I.

Inverting Amplifier
a. Diagram

b. Theoretical Vout and gain


Vout = -4.254
Gain = 2.5
c. Table 1:
V2
V3
V6
d. Table 2:

Simulated
40.89 uV
0V
-4.25V

Theoretical
35uV
0V
-4.25V

Experimental
-30 uV
3.6V
-4.25V

Simulated
Theoretical
Experimental
Gain
2.5
2.35
2.2
e. Explanation: The results obtained in the experiment were
similar to the simulations and the theoretical values.

2. Non-Inverting Amplifier
a. Diagram

b. Theoretical Values
Vout:6.255
Gain: 3.5
c. Table 1:
V2
V3
V6
d. Table 2:

Simulated

Theoretical

Experimental

2V
2V
6.256

2V
2V
6.255V

2
2
6.255

Simulated
Theoretical
Experimental
Gain
3.5
3.25
3
a. Explanation: The results obtained in the experiment were
similar to the simulations and the theoretical values.

3. Differencing Amplifier
a. Diagram

b. Theoretical Values
Vout:
c. Table 1:
V2
V3
V6
d.

Simulated
Theoretical
Experimental
2.721
2.721
2.718V
2.721
2.715
2.714V
4.255
4.152
2.718V
Explanation: The results obtained in the experiment were
not similar to the simulations and the theoretical values
because there were multiple inputs but only one output

4. Summing Amplifier
a. Diagram

b. Theoretical Values
Vout: -7.9V
Gain:
c. Table 1:
Simulated
Theoretical
Experimental
V2
4.126V
4.025V
-.956V
V3
0V
0V
-.256V
V6
-9.816
-8.5
-7.9V
d. Explanation: The results obtained in the experiment were
not similar to the simulations and the theoretical values
because there were multiple inputs but only one output

Analysis:
1. The resistance seen at Terminal 3:
a. 0

b. 0
c. 4.7k//10k
d. 0

2.
3. A = Rf/Ri
4. For the first two configurations yes, but the last two
configurations would not.
Conclusion: In this lab we built and simulated basic op-amp
circuits. Circuit configurations tested include inverting, noninverting, differencing, and summing amplifiers.

You might also like