Professional Documents
Culture Documents
Buna CB 23
Buna CB 23
Rubber
Technical
Data Sheet
TITLE:
Buna CB 23
TEXT:
Chemical Identification
Supply Form
Product Characteristics
Raw Material
Nominal Value
Unit
Test Method
51 5
MU
DIN 53 523
Ash content
max. 0.5
ASTM D 1416
Volatile matter
max. 0.5
ASTM D 1416
Organic acid
max. 1.0
ASTM D 1416
Cis-1,4 content
min. 96
IR spectroscopy
approx. 0.91
g/cm
Density
Solubility
Staining (stabiliser)
Vulcanisate
Test formulation according to
ISO 2476
no
Nominal Value
Unit
Test Method
Smin
3.3 0.5
dNm
ISO 6502
Smax
19.7 2.0
dNm
ts01
3.2 0.8
min
t50
7.4 1.6
min
t90
11.1 2.4
min
Tensile strength
approx. 15.5
MPa
Elongation at break
approx. 470
approx. 9.3
MPa
These raw material properties are typical properties and, unless specifically
indicated otherwise, are not to be considered as delivery specification.
Technical Data Sheet
KA-FK-0005e/04/09.97
Page 1 of 2
Technical
Data Sheet
Storage Life
Packaging
Marking
Product Safety
This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies
where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as
to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on
the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with our
General Conditions of Sale and Delivery.
__________________________________________________________________________________________________________________________