Professional Documents
Culture Documents
Carbon Fiber Instead of Al, Cool-It Mat Can Be Used
Carbon Fiber Instead of Al, Cool-It Mat Can Be Used
the engine
oil, the liquid cooling systems and any high voltage system. It must protect the
neck of the tallest driver. It must extend sufficiently far upwards and/or rearwards such that any point
less than 100 mm (4 ins.) above the bottom of the helmet of the tallest driver shall not be in direct line
of sight with any part of the fuel system, the cooling system or the engine oil system.
on our last years car the accumulator containers were mounted to the sides and were made of
carbonfiber with a fireproof resin, but we still had to use a firewall between them and the driver.
In 2010 we used aluminium sheet with nomex on the driver side
carbon fiber
Instead of Al, Cool-It Mat can be used:The Cool-It Mat is composed of resin-bonded silica blanketing insulation
sandwiched between a mylar facing on one side and a foil facing on the other.
The highly-reflective mylar reflects heat away from surfaces, while the foil side is
orientated away from the heat source to conduct any penetrating heat across its
surface thus providing the ultimate in heat protection.
Weight 1.5 pound=0.7 kg;
24*48 Rs 2754