Professional Documents
Culture Documents
OSN 9800 V100R001C01 Product Overview 01
OSN 9800 V100R001C01 Product Overview 01
OSN 9800 V100R001C01 Product Overview 01
Platform
V100R001C01
Product Overview
Issue
01
Date
2013-08-10
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 01 (2013-08-10)
Contents
Contents
1 Introduction....................................................................................................................................1
1.1 Product Highlights and Specifications...........................................................................................................................2
1.1.1 Product Highlights.......................................................................................................................................................2
1.1.2 Product Specifications.................................................................................................................................................3
1.2 Product Networking........................................................................................................................................................6
1.3 Product Features.............................................................................................................................................................8
1.3.1 Line Rate......................................................................................................................................................................8
1.3.2 OTN Application.........................................................................................................................................................9
1.3.3 ROADM Application..................................................................................................................................................9
1.3.4 OTN + ROADM Application......................................................................................................................................9
1.3.5 Packet Application.....................................................................................................................................................10
1.3.6 Redundancy and Protection.......................................................................................................................................11
1.3.7 Automatic Optical Power Management....................................................................................................................13
1.3.8 Synchronization.........................................................................................................................................................14
1.3.9 ASON Feature...........................................................................................................................................................15
1.4 Supported Services Types............................................................................................................................................17
2 Product Architecture...................................................................................................................20
2.1 System Architecture.....................................................................................................................................................21
2.2 Hardware Architecture..................................................................................................................................................22
2.2.1 Cabinet Introduction..................................................................................................................................................22
2.2.2 OptiX OSN 9800 U64 Subrack.................................................................................................................................23
2.2.3 OptiX OSN 9800 U32 Subrack.................................................................................................................................26
2.2.4 OptiX OSN 9800 Universal Platform Subrack..........................................................................................................29
2.2.5 Board.........................................................................................................................................................................31
2.2.6 Pluggable Optical Modules.......................................................................................................................................40
3 Network Management................................................................................................................41
4 Operation and Maintenance......................................................................................................44
5 Power Saving and Environment Protection...........................................................................46
5.1 Power Saving................................................................................................................................................................47
5.1.1 Static Power Saving...................................................................................................................................................47
5.1.2 Dynamic Power Saving.............................................................................................................................................47
5.1.3 Control and Monitoring of Power Saving Status.......................................................................................................48
Issue 01 (2013-08-10)
ii
Contents
Issue 01 (2013-08-10)
iii
1 Introduction
Introduction
Issue 01 (2013-08-10)
1 Introduction
Features high cross-connect capacity. A single subrack supports a maximum of 12.8 Tbit/
s cross-connect capacity, implementing large-capacity service grooming. Only one subrack
is required for the large-capacity service grooming and, therefore, lowers power
consumption and reduces the floor space. In addition, the cross-connect capacity can be
increased to 20 Tbit/s or higher in the future.
Supports unified switching capabilities of VC, ODUk, and PKT services, which converges
service grooming planes, and supports flexible bandwidth allocation.
Supports hybrid transmission of 10 Gbit/s, 40 Gbit/s, and 100 Gbit/s signals, and supports
a smooth upgrade from a low-rate network to a high-rate network.
Satisfies requirements on large-bandwidth transmission using 40 Gbit/s and 100 Gbit/s line
rates. The line rates can be upgraded to 400 Gbit/s and 1 Tbit/s in the future.
Provides the highest integration in the industry and supports 200 Gbit/s capacity (which
can be upgraded to 400 Gbit/s in the future) per slot.
High-density Ethernet Card and Hybrid Line card Efficiently transmit IP and OTN traffic.
Provides protection for power supply devices, fans, communication control and clock
processing unit (CTU) boards, and the cross-connection resource pool.
Issue 01 (2013-08-10)
1 Introduction
Advanced Power Saving Technology with Low Power Consumption and High
Maintainability, Providing the Best Operation Experience and Minimizing OPEX
l
Uses advanced power saving technologies with intelligent fans, -shape air ducts, optimal
chips, and excellent system design. This feature improves power and power consumption
efficiency, and minimizes energy consumption.
Uses an intelligent power supply pool and implements visual power consumption
management. You can configure power terminals based on the number of boards and view
power consumption data of subracks in real time.
Features high maintainability by integrating the OptiX OSN 9800 U64 into a cabinet. The
cabinet is also integrated with fiber management frames, ensuring easy installation and
operation.
Provides the highest configuration, loading, and startup efficiency in the industry.
Newly supports 19-inch subracks and can be installed in various types of cabinets, such as
19-inch cabinet or ETSI cabinet.
Issue 01 (2013-08-10)
Specifications
1 Introduction
Subrack Dimensions
(mm)
Cabinet
N/A
N63B, N66B
64
32
Product appearance
Switchi
ng
capabili
ty
Opticala
Electrical
Max. number of
wavelengths
DWDM system: 80
Wavelength range
Service type
Issue 01 (2013-08-10)
1 Introduction
Specifications
N/A
Line rate
Topology
Point-to-point, chain, star, ring, ring-with-chain, tangent ring, intersecting ring, and
mesh
Redund
ancy
and
protecti
on
Equipment
level
protection
Network
level
protection
(OTN)
Network
Level
Protection
(Ethernet
and Packet)
Optical power
management
Synchronizationb
l IEEE 1588v2
l 2 Mbit/s or 2 MHz (with the SSM function), ITU-T G.703-compliant external clock
source
l External time source (1PPS+TOD)
ASON
Electrical-layer ASON
Operation Environment
Subrack temperature:
l Long-term operation: 5C (41 F) to 40C (104 F)
l Short-term operation: -5C (23 F) to 45C (113 F)
Relative humidity:
l Long-term operation: 5% to 85%
l Short-term operation: 5% to 90%
Issue 01 (2013-08-10)
Specifications
1 Introduction
a: These features are available only when the OptiX OSN 9800 U64/U32 subrack works with the OptiX OSN
9800 universal platform subrack, OptiX OSN 8800 T16, or OptiX OSN 6800 subrack. This document describes
these features by considering that the OptiX OSN 9800 U64/U32 subrack works with the OptiX OSN 9800
universal platform subrack.
b: The feature is available only when the OptiX OSN 9800 U64/U32 subrack works with an OptiX OSN 8800
T16 subrack. For details about the feature, see the corresponding manual for the product that the OptiX OSN
9800 works with.
ODUk
switching
OptiX OSN
8800 T64
OptiX OSN
9800 U64
OptiX OSN
9800 U32
ODUk
switching
OptiX OSN
6800
ODUk
switching
OptiX OSN
1800
OptiX OSN
8800 T32
OptiX OSN
1800
OptiX OSN
3800
OptiX OSN
1800
Issue 01 (2013-08-10)
OptiX OSN
3800
OptiX OSN
8800 T32 OptiX OSN
8800 T16
ODUk
switching
OptiX OSN
1800
Backbone
core layer
ODUk
switching
ODUk
switching
OptiX OSN
9800 U32
OptiX OSN
1800
OptiX OSN
9800 U32
OptiX OSN
6800
OptiX OSN
8800 T32
OptiX OSN
8800 T16
OptiX OSN
9800 U32
ODUk
switching
OptiX OSN
1800
Convergence
layer
OptiX OSN
1800
Access
layer
1 Introduction
Figure 1-2 Role of the OptiX OSN 9800 in a network-wide solution (Typical MS-OTN
networking)
OptiX OSN
9800 U32
ODUk/Packet
switching
ODUk/Packet
switching
OptiX OSN
8800 T32
OptiX OSN
9800 U32
OptiX OSN
9800 U32
ODUk/Packet
switching
OptiX OSN
8800 T32
OptiX OSN
8800 T16
OptiX OSN
1800
ODUk/Packet
switching
OptiX OSN
1800
OptiX OSN
8800 T16
OptiX OSN
8800 T32 OptiX OSN
8800 T16
ODUk/Packet
switching
OptiX OSN
1800
Backbone
core layer
ODUk/Packet
switching
ODUk/Packet
switching
OptiX OSN
9800 U32
OptiX OSN
8800 T16
OptiX OSN
9800 U32
OptiX OSN
8800 T16
OptiX OSN
8800 T32
OptiX OSN
9800 U32
OptiX OSN
3800
OptiX OSN
1800
OptiX OSN
1800
ODUk/Packet
switching
OptiX OSN
1800
Convergence
layer
OptiX OSN
1800
Access
layer
For a new network, the OptiX OSN 9800 are usually used as electrical subrack and optical
subrack. For a capacity expansion network, the 9800 supports multiple expansion modes. As
shown in Figure 1-3, the following are the three main expansion modes:
l
Node expansion: At a node, add OptiX OSN 9800 as electrical subrack and optical subrack,
and interconnect the node with the OptiX OSN 8800 node on the network.
Capacity expansion: At a node, add an electrical OptiX OSN 9800 subrack to work with
existing electrical and optical OptiX OSN 8800 subracks to expand the electrical-layer
capacity of the node.
Grooming capability enhancement for optical line amplifier (OLA) sites: At an OLA site,
an electrical OptiX OSN 9800 subrack is added to work with an existing optical OptiX
OSN 8800 or 6800 subrack to enhance the electrical grooming capability of the OLA site.
Issue 01 (2013-08-10)
1 Introduction
Figure 1-3 Hybrid networking with OptiX OSN 9800 and OptiX OSN 8800/6800
NE2
NE3
Before expansion
NE1
NE4
NE2
NE1
NE5
NE3
After expansion
Capacity
expansion
wss
NE8
NE7
NE4
Node
expansion
NE6
wss
Grooming
capability enhancement
for OLA sites
wss
wss
NE7(9800-O)
N
NE1(8800-O)
T
NE8(9800-E)
NE4(8800/6800-O)
T
T
NE1(8800-E) NE5(9800-E)
N
Service flow
T
NE6(9800-E)
N: Line board
1 Introduction
OTN cross-connection
Services at any granularity can be aggregated into any ODUk pipe, and different types of
services from multiple sites can be mixed in one ODUk pipe. OTN cross-connection enables
flexible service grooming and improves bandwidth utilization.
1 Introduction
A tributary board receives client services at any bit rate. After OTN mapping and ODUk
cross-connection are complete, the client signals are flexibly cross-connected on the
electrical layer and share bandwidth. A line board then outputs the signals over different
wavelengths.
Along the optical cross-connections on the ROADM board, the signals over different
wavelengths can be transmitted in any optical direction.
If the signals in an optical direction do not need to be locally terminated, they can be directly
transmitted to another optical direction through the optical cross-connections on the
ROADM board.
MEF: E-Line
IETF: VPWS
In addition to transparently transmitting traditional Ethernet services, the OptiX OSN 9800
supports Layer 2 switching of Ethernet data packets, provides protection for Ethernet services,
and performs QoS and OAM functions for the Ethernet services. It also provides packet transport
solutions.
Issue 01 (2013-08-10)
10
1 Introduction
Description
Client 1+1
protection
Intra-board 1
+1 protection
Protects OCh fibers using diverse routing and the dual feeding and selective
receiving function of OLP/DCP boards.
LPT
Detects and reports faults at the service access points and on intermediate
networks. It also helps data communication equipment, such as routers,
switch to the backup network in a timely manner. By doing so, normal
transmission of important services can be remained even when the link is
faulty.
Optical Line
Protection
It uses the dual fed and selective receiving function of the OLP board to
protect line fibers between adjacent stations by using diverse routing.
ODUk SNCP
Protects services against line board faults and OCh fiber disconnections
using the dual feeding and selective receiving function of electrical-layer
cross-connections. The OptiX OSN 9800 supports ODUk SNCP protection.
Tributary
SNCP
Issue 01 (2013-08-10)
11
1 Introduction
Description
LAG
The LAG aggregates multiple physical links to form a logical link that is at
a higher rate. Link aggregation functions between adjacent equipment.
Hence, link aggregation is not related to the architecture of the entire
network. Link aggregation is also called port aggregation because each link
corresponds to a port on an Ethernet.
PW APS
Tunnel APS
Description
Power redundancy
Two PIU boards in hot backup mode supply power at the same time
to one subrack. If one PIU board fails, the other board will continue
to supply power to ensure that the subrack remains fully functional.
Fan redundancy
If a fan in a fan tray assembly fails, the system can remain operational
for 96 consecutive hours in environments where temperatures range
between 0C to 40C (32F to 104F).
XCS Board
Redundancy
The cross-connect board uses the M:N backup policy. The working
and protection cross-connect boards in a subrack connect to all other
boards through the backplane bus to protect cross-connection
services.
Communication
Control and Clock
Processing Unit
Redundancy
Issue 01 (2013-08-10)
12
1 Introduction
Description
Power redundancy
Two PIU boards in hot backup mode supply power at the same
time to one subrack. If one PIU board fails, the other board will
continue to supply power to ensure that the subrack remains
fully functional.
Fan redundancy
Issue 01 (2013-08-10)
Functi
on
Description
ALS
After the automatic laser shutdown (ALS) function is enabled on a tributary or line
board, the board shuts down the laser in the transmit direction when it receives no
optical signals from the upstream board. The board re-enables the laser when it
receives optical signals. This function prevents injuries associated with lasers and
prolongs the life of a laser by decreasing the working time of the laser.
AGC
The automatic gain control (AGC) function ensures that channel gain is not
affected when wavelengths are added or dropped or when there is optical power
fluctuation in the WDM system. This function guarantees normal service running
in the WDM system.
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
13
1 Introduction
Functi
on
Description
ALC
APE
The automatic power equilibrium (APE) function automatically detects and adjusts
the optical power along channels on WDM-side ports to ensure the required
channel optical power flatness. If the channel optical power varies and flatness is
not maintained to a specified requirement, the OSNR of the optical transmission
line will deteriorate, which will degrade and possibly interrupt the communication.
IPA
IPA of
Raman
system
The LINE optical port on the CRPC board outputs high-power pump light. To
prevent injuries associated with lasers, especially eye damage caused by laser
radiation, the IPA function shuts down lasers on Raman amplifiers when a line
fault occurs.
1.3.8 Synchronization
When the OptiX OSN 9800 interconnects with MSTP or PTN equipment, the OptiX OSN 8800
T16 can be used as an optical NE of the OptiX OSN 9800 to achieve end-to-end transmission
of the IEEE 1588v2, synchronous Ethernet, or 2 MHz/2 Mbit/s external clock.
Physical Clock
Currently the OptiX OSN 8800 T16 supports extracting the physical clock from the 2M timing
signal received through the external clock port.
l
The OptiX OSN 8800 T16 supports two 120-ohm or 75-ohm external clock inputs and
outputs.
The OptiX OSN 8800 T16 supports three clock modes: trace, holdover.
The OptiX OSN 8800 T16 supports the line and 2 Mbit/s clocks. It can process and transmit
synchronization status messages (SSMs).
IEEE 1588v2
The IEEE 1588v2 clock complies with the IEEE 1588v2 protocol. It is also called IEEE 1588v2
clock and used for time synchronization.
Issue 01 (2013-08-10)
14
1 Introduction
To achieve IEEE 1588v2 clock synchronization, all NEs on the clock link must support the IEEE 1588v2
protocol.
Bandwidth utilization is low and inefficient. For example, on a ring network, half of the
bandwidth is always vacant.
Limited protection schemes are applicable, among which the self-healing protection has
poor performance.
Huawei developed ASON to help carriers to meet these challenges. ASON enhances the network
connection management and recovery capabilities by introducing signaling to the legacy
transmission network and providing a control plane. It supports end-to-end service
configurations and different service level agreement (SLA) levels.
Service Configuration
Legacy WDM networks are generally chains and rings. The trails and timeslots of their services
are manually configured ring by ring and node by node, which is time- and labor-consuming.
As networks are growing and becoming more complex, this service configuration mode hardly
addresses the rapidly increasing user demands.
ASON solves this problem by enabling end-to-end service configurations. Specifically, to
configure a service, the user only needs to specify the source node, sink node, bandwidth demand,
and protection type, and the system will do the rest.
Bandwidth Utilization
Legacy WDM transmission networks have a high proportion of resources reserved and lack
advanced service protection, restoration and routing functions. In contrast, with the routing
function, ASON-empowered WDM transmission networks provide protection by reserving
fewer resources, increasing network resource utilization.
Reliability Mechanisms
Legacy WDM transmission networks use chains and rings as network topologies and optical
line protection and board-level protection as the service protection schemes. In contrast, ASONempowered WDM transmission networks generally use the mesh topology. In addition to
sufficient protection, ASON provides the dynamic restoration function to restore services.
Specifically, if there are multiple failures on a network, the services can be restored whenever
possible.
Issue 01 (2013-08-10)
15
1 Introduction
According to the variation in service restoration time, different levels of services are defined in
ASON to meet diverse requirements of customers.
SLA
An ASON network provides different levels of services to meet varied customer demands. The
WDM electrical-layer ASON supports diamond, silver, and copper SLA services at the ODUk
level (k = 0, 1, 2, 2e, 3, and 4).
ASON feature
Automatically switched optical network (ASON) is a new generation of the optical transmission
network. The ASON software developed by Huawei can be applied to the OptiX OSN 9800 to
enable the evolution from a legacy transmission network to an ASON network. Such evolution
complies with the ITU and IETF ASON/GMPLS-related standards.
ASON enhances the network connection management and recovery capabilities by introducing
signaling to the transmission network and providing a control plane. It enables the system to
provide ODUk level ASON services at the electrical layer, and also achieves end-to-end service
configuration and service level agreement (SLA). As shown in the Figure 1-5, in a mesh
network, a service from the source node A to the sink node G can be transmitted along three
paths: D1 (A-B-F-G), D2 (A-D-G), and D3 (A-E-H-G). If a fault occurs between nodes A and
B, or if the D1 path is unavailable, the service can be sent to the sink node along path D2 or D3
using ASON techniques.
Figure 1-5 Example of service protection in an ASON network
16
1 Introduction
Various route selection strategies, making the network controllable and reliable
Service Type
Service Rate
Board
Standard
Compliance
SDH
STM-1
155.52 Mbit/s
T130, LOA
ITU-T G.707
STM-4
622.08 Mbit/s
T130, LOA
ITU-T G.691
STM-16
2.5 Gbit/s
T130, LOA
STM-64
9.95 Gbit/s
T216, LSX
ITU-T G.783
STM-256
39.81 Gbit/s
T302, LSQ
ITU-T G.825
OC-3
155.52 Mbit/s
T130, LOA
OC-12
622.08 Mbit/s
T130, LOA
OC-48
2.5 Gbit/s
T130, LOA
GR-253-CORE
GR-1377-CORE
ANSI T1.105
OC-192
9.95 Gbit/s
T216, LSX
OC-768
39.81 Gbit/s
T302, LSQ
FE (optical
signal)
Interface rate:
125 Mbit/s
T130, LOA
IEEE 802.3u
IEEE 802.3z
SONET
Ethernet
service
ITU-T G.957
ITU-T G.693
Service rate:
100 Mbit/s
GE (optical
signal)
Interface rate:
1.25 Gbit/s
Service rate: 1
Gbit/s
Issue 01 (2013-08-10)
17
Service
Catego
ry
1 Introduction
Service Type
Service Rate
Board
GE (electrical
signal)
Interface rate:
1.25 Gbit/s
Standard
Compliance
Service rate: 1
Gbit/s
SAN
service
OTN
service
Issue 01 (2013-08-10)
10GE WAN
9.95 Gbit/s
10GE LAN
10.31 Gbit/s
40GE
41.25 Gbit/s
T302
100GE
103.125 Gbit/s
FDDI
125 Mbit/s
T130, LOA
ISO 9314
ESCON
200 Mbit/s
T130, LOA
FICON
1.06 Gbit/s
FICON Express
2.12 Gbit/s
ANSI X3.296
ANSI X3.230
ANSI X3.303
FC100
1.06 Gbit/s
FC200
2.12 Gbit/s
FC400
4.25 Gbit/s
FC800
8.5 Gbit/s
T216, LOA
FC1200
10.51 Gbit/s
FICON4G
4.25 Gbit/s
FICON8G
8.5 Gbit/s
T216, LOA
FICON10G
10.51 Gbit/s
LOA
InfiniBand
2.5G
2.5 Gbit/s
LOA
InfiniBand 5G
5 Gbit/s
LOA
ISC 1G
1.06 Gbit/s
LOM
ISC 2G
2.12 Gbit/s
LOM
OTU1
2.67 Gbit/s
T130, LOA
OTU2
10.71 Gbit/s
T216, LSX
OTU2e
11.10 Gbit/s
T216, LSX
IEEE 802.3ae
IEEE 802.3ba
InfiniBand TM
Architecture
Release 1.2.1
IBM GDPS
( Geographically
Dispersed Parallel
Sysplex) Protocol
ITU-T G.709
ITU-T G.959.1
GR-2918-CORE
18
Service
Catego
ry
Video
service
Issue 01 (2013-08-10)
1 Introduction
Service Type
Service Rate
Board
OTU3
43.02 Gbit/s
T302, LSQ
OTU4
111.81 Gbit/s
T401, T402
DVB-ASI
270 Mbit/s
T130, LOA
EN 50083-9
SDI
270 Mbit/s
T130, LOA
SMPTE 259M
HD-SDI
1.485 Gbit/s
T130, LOA
SMPTE 292M
HD-SDIRBR
1.49/1.001
Gbit/s
T130, LOA
3G-SDI
2.97 Gbit/s
T130, LOA
3G-SDIRBR
2.97/1.001
Gbit/s
T130, LOA
Standard
Compliance
SMPTE 424M
19
2 Product Architecture
Product Architecture
Issue 01 (2013-08-10)
20
2 Product Architecture
L0
Optical-layer board
Client-side optical module
WDM-side optical module
Signal processing module
ODUk
L1
L2
L1
L2
Fans
-48 V/-60 V DC
NMS
Power (active)
Auxiliary
interface
board
External clock/
external time
Power (standby)
DCN
Backplane
Electrical signal
Optical-layer service
Issue 01 (2013-08-10)
Optical-layer boards are classified into optical multiplexer and demultiplexer boards,
optical add/drop multiplexer (OADM) boards, optical amplifier (OA) boards, optical
spectrum analysis boards, variable optical attenuator boards, and optical power and
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
21
2 Product Architecture
dispersion equalization boards. These boards process optical-layer services, for example,
to cross-connect wavelengths at the optical layer.
l
OTN tributary and OTN line boards process electrical-layer signals and perform O-E-O
conversions. The OptiX OSN 9800 uses a tributary-line-separate architecture and a
centralized cross-connect unit to flexibly groom electrical-layer signals at different
granularities.
Universal line board is used to process electrical-layer signals and perform conversion
between optical and electrical signals. In addition, the board can work with a centralized
cross-connect board to achieve universal transmission and fine-grained grooming of OTN
and packet services.
Packet service board has L2 processing capabilities. They can add, strip, and exchange
MPLS tags, learn MAC addresses, and forward packets.
As the control center of the entire system, the CTU board cooperates with the network
management system (NMS) to manage boards in the OptiX OSN 9800 and implement intersubrack communication.
The power supply and fan systems have a redundancy protection design and ensure highlyreliable equipment operation.
The auxiliary interface board provides functional ports such as clock/time input/output
ports (reserved), alarm output and cascading ports, and alarm input/output ports.
Appearance
Height
extension
frame
(optional)a
Issue 01 (2013-08-10)
22
2 Product Architecture
Parameter
Doors/
Panels
The door keys for all N66B cabinets and N63B cabinets are the same.
Dimensions
(H x W x D)
Height
Door keys
De
pth
dth
Wi
Weight
Standard
working
voltage
-48 V DC or -60 V DC
Working
voltage
range
a: A 400 mm height extension frame can be placed at the top of the cabinet, which increases
the height of the cabinet to 2600 mm.
23
2 Product Architecture
PIU boards are located in the power and interface area. In Figure 2-2, if an area has the same
background color as a PIU board, then the PIU board powers the boards located in this area.
Figure 2-2 Schematic diagram of the areas and slots in the OptiX OSN 9800 U64 subrack
Front side
Rear side
Indicator area
PIU
EFI
IU93
FAN
IU92
FAN
PIU
PIU
IU IU IU IU IU IU IU IU IU IU IU
100 101 102 103 104 105 106 107 108 109 110
Power and
interface area
Fan area
Reserved
PIU
IU IU IU IU IU IU IU IU IU IU IU
111 112 113 114 115 116 117 118 119 120 121
IU97
FAN
IU96
FAN
Fiber-routing
area
IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
IU78
IU77
IU76
IU75
IU74
IU73
IU72
IU71
IU70
CTU
XCS
XCS
XCS
XCS
XCS
XCS
XCS
CTU
IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Service board
area
System control
and crossconnect board
area
Service board
area
IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
IU85
IU84
IU83
IU82
IU81
IU80
IU79
XCS
XCS
XCS
XCS
XCS
XCS
XCS
IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
Fiber-routing
area
Issue 01 (2013-08-10)
IU91
FAN
IU90
FAN
Fan area
IU95
FAN
IU94
FAN
24
2 Product Architecture
Table 2-1 Descriptions of the areas and slots in the OptiX OSN 9800 U64 subrack
Are
a
Function
Slot
Pow
er
and
inter
face
area
NOTE
The EFI board is
located only on the
front side of the
equipment.
NOTE
The PIU boards installed backto-back are in mutual backup,
for example, the PIU boards in
slots IU100 and IU121, the PIU
boards in slots IU101 and
IU120, and so on.
EFI: IU105
l On the rear side:
PIU: IU111-IU115,
IU117-IU121
IU116: reserved
4 fan tray
assemblies, two in
each of the fan areas
Issue 01 (2013-08-10)
Fiber
routi
ng
areas
N/A
Servi
ce
boar
d
areas
64 service boards
NOTE
Service boards installed in slots
IU1-IU16 and IU33-IU48 have
their ejector levers on the right
sides of the board front panels.
Service boards installed in
remaining slots in the two areas
have their ejector levers on the left
sides of the board front panels.
25
2 Product Architecture
Are
a
Function
Slot
Syst
em
contr
ol
and
cross
conn
ect
boar
d
area
2 CTU system
control boards (on
the front side only)
and 7 XCS crossconnect boards
PIU, CTU, and XCS boards and fan tray assemblies must be fully configured in each subrack.
Mechanical Specifications
Table 2-2 lists the mechanical specifications of the OptiX OSN 9800 U64 equipment.
Table 2-2 Mechanical specifications of the OptiX OSN 9800 U64 equipment
Parameter
Specifications
Dimensions (H x W x D)
Weighta
a: The weight is measured when the equipment has no boards or fan tray assemblies installed.
26
2 Product Architecture
PIU boards are located in the power and interface area. In Figure 2-3, if an area has the same
background color as a PIU board, then the PIU board powers the boards located in this area.
Figure 2-3 Schematic diagram of the areas and slots in the 9800 U32 subrack
PIU
EFI
PIU
IU IU IU IU IU IU IU IU IU IU IU
100 101 102 103 104 105 106 107 108 109 110
IU93
FAN
IU92
FAN
Power and
interface area
Fan area
Fiber-routing
area
IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
IU78
IU77
IU76
IU75
IU74
IU73
IU72
IU71
IU70
CTU
XCS
XCS
XCS
XCS
XCS
XCS
XCS
CTU
IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU IU
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Issue 01 (2013-08-10)
IU91
FAN
IU90
FAN
Service
board area
System control
and cross-connect
board area
Service
board area
Fiber-routing
area
Fan area
27
2 Product Architecture
Table 2-3 Descriptions of the areas and slots in the OptiX OSN 9800 U32 subrack
A
re
a
Include(s) ...
Function
Slot
P
o
w
er
an
d
in
te
rf
ac
e
ar
ea
l PIU: IU100-IU104,
IU107-IU110
l EFI: IU105
NOTE
The PIU boards on the left and
right sides of the EFI board are
in mutual backup, for example,
the PIU boards in slots IU100
and IU106, the PIU boards in
slots IU101 and IU107, and so
on.
Issue 01 (2013-08-10)
Fa
n
ar
ea
s
Fi
be
rro
ut
in
g
ar
ea
s
N/A
Se
rv
ic
e
bo
ar
d
ar
ea
s
32 service boards
NOTE
Service boards installed in slots IU1IU16 have their ejector levers on the
right sides of the board front panels.
Service boards installed in
remaining slots in the two areas have
their ejector levers on the left sides
of the board front panels.
28
2 Product Architecture
A
re
a
Include(s) ...
Function
Slot
S
ys
te
m
co
nt
ro
l
an
d
cr
os
sco
nn
ec
t
bo
ar
d
ar
ea
2 CTU system
control boards and 7
XCS cross-connect
boards
l XCS: IU71-IU77
l CTU: IU70, IU78
PIU, CTU, and XCS boards and fan tray assemblies must be fully configured in each subrack.
Mechanical Specifications
Table 2-4 lists the mechanical specifications of the OptiX OSN 9800 U32 subrack.
Table 2-4 Mechanical specifications of the OptiX OSN 9800 U32 subrack
Parameter
Specifications
Dimensions (H x W x D)
Weighta
68 kg (149.9 lb.)
a: The weight is measured when the subrack has no boards or fan tray assemblies installed.
Issue 01 (2013-08-10)
29
2 Product Architecture
IU1
IU2
Interface
area
IU17
PIU
IU3
IU4
IU5
IU6
IU7
IU8
Board
Area
IU18
PIU
Fiber-routing area
IU19 Fan
Fan
Air filter
Mutual backup
Interface area: The EFI board provides maintenance and management interfaces.
Board area: IU1 to IU16 are reserved for the service boards.
l
When the OptiX OSN 9800 universal platform subrack functions as a master subrack, two
SCC boards must be inserted in slots IU1 and IU2 for backup. When the subrack is equipped
with only one SCC board, slot IU1 cannot be used to hold any service board but slot IU2
can.
When the OptiX OSN 9800 universal platform subrack functions as a slave subrack, the
SCC board is not required. In this case, slots IU1 and IU2 can be used to house service
boards.
Fiber-routing area: Fiber jumpers from the ports on the front panel of each board are routed to
the fiber cabling area before being routed on a side of the cabinet.
Mechanical Specifications
Table 2-5 lists the mechanical specifications of the OptiX OSN 9800 universal platform subrack.
Issue 01 (2013-08-10)
30
2 Product Architecture
Table 2-5 Mechanical specifications of the OptiX OSN 9800 universal platform subrack
Parameter
Specifications
Dimensions (W x D x H)
Weighta
8 kg (17.6 lb.)
a: The weight is measured when the subrack has no boards or fan tray assemblies installed.
2.2.5 Board
OptiX OSN 9800 U64/U32 Board Category
OptiX OSN 9800 U64/U32 boards are described by type. Before boards are described in details,
a board list for each type is provided for quick reference.
Issue 01 (2013-08-10)
31
2 Product Architecture
Issue 01 (2013-08-10)
32
2 Product Architecture
Cross-Connect Boards
Interface Boards
Issue 01 (2013-08-10)
33
2 Product Architecture
Fan
OTU Boards
Table 2-15 Regeneration boards that the OptiX OSN 9800 universal platform subrack supports
Board
Name
Board Description
TN11LO
A
TN12LO
M
TN12LSC
/
TN13LSC
TN11LSQ
TN14LSX
Regeneration Boards
Table 2-16 Regeneration boards that the OptiX OSN 9800 universal platform subrack supports
Issue 01 (2013-08-10)
Board
Name
Board Description
TN52ND
2
34
Board
Name
Board Description
TN55NO
2
TN53NQ
2
TN54NS3
/
TN56NS3
TN54NS4
/
TN56NS4
2 Product Architecture
Issue 01 (2013-08-10)
Board
Name
Board Description
TN11D40
/
TN12D40
TN11M4
0/
TN12M4
0
TN11M4
0V/
TN12M4
0V/
TN13M4
0V
TN11ITL
Interleaver board
TN12FIU
/
TN13FIU
/
TN14FIU
TN11SFI
U
35
2 Product Architecture
Board Description
TN11RD
U9
TN12TD2
0
TN11TM
20
TN12WS
D9/
TN13WS
D9
TN12WS
M9/
TN13WS
M9
TN11WS
MD4/
TN12WS
MD4
TN11WS
MD9
Issue 01 (2013-08-10)
Board
Name
Board Description
TN11CRP
C
TN11DA
S1
TN11HB
A
36
2 Product Architecture
Board
Name
Board Description
TN12OA
U1/
TN13OA
U1
TN12OB
U1
TN12OB
U2
TN11RA
U1
Backward Raman and erbium doped fiber hybrid optical amplifier unit
TN11RA
U2
Backward Raman and erbium doped fiber hybrid optical amplifier unit
Board Description
TN52SCC
Issue 01 (2013-08-10)
Board
Name
Board Description
TN11HS
C1
TN12SC1
TN12SC2
TN11ST2
37
2 Product Architecture
Board Description
TN11DC
P/
TN12DC
P
TN12OLP
Board Description
TN11MC
A4
TN11MC
A8
TN11OP
M8/
TN12OP
M8
TN11WM
U
Issue 01 (2013-08-10)
Board
Name
Board Description
TN12VA
1
TN12VA
4
38
2 Product Architecture
Board Description
TN11DC
U
TN11TD
C
Interface Boards
Table 2-26 Interface board that the OptiX OSN 9800 universal platform subrack supports
Board
Name
Board Description
TN18EFI
Board Description
TN18PIU
Fan
Table 2-28 Fan tray assembly that the OptiX OSN 9800 universal platform subrack supports
Issue 01 (2013-08-10)
Board
Name
Board Description
TN18FA
N
39
2 Product Architecture
Board Description
TN11GF
U
TN11RG
U
TN11RO
P
Issue 01 (2013-08-10)
40
3 Network Management
Network Management
This topic describes the network management system (NMS), as well as inter- and intra-NE
communication management.
Figure 3-1 shows an example of a network management structure with Huawei equipment
deployed.
Figure 3-1 Network management structure
Secondary
U2000
Primary
U2000
External DCN
Site D
Site E
Site A
Site C
Master
Site F
Slave
Slave
GNE
Subrack
U2000
Web LCT
Site B
Switch
Non-GNE
Fiber
Router
Network cable
Inter-NE communication:
Issue 01 (2013-08-10)
41
3 Network Management
NEs between sites A and F are interconnected with fibers and exchange information
over ESC/OSC channels using the HWECC or IP over DCC protocol.
Some NEs at certain site (such as, NEs at site B) are interconnected with network cables
(usually when optical and electrical NEs are separate), and exchange information over
Ethernet channels (provided by NM ports on the CTU boards) using the HWECC or IP
over DCC protocol.
NEs at sites A and C are designated as gateway NEs (GNEs) and are connected to an
external data communication network (DCN) through a switch or router to achieve
communication with the NMS. All the other NEs are designated as non-GNEs and
communicate with the NMS through a GNE.
l
An external DCN is a local area network (LAN) or a wide area network (WAN) and uses
the TCP/IP protocol for communication. It provides communication between NMSs and
between the NMS server and GNEs.
An internal DCN provides communication between NEs using the HCP/IP protocol. The
protocol packets are transmitted over optical supervisory channels (OSCs), electric
supervisory channels (ESCs), or Ethernet channels channels.
42
3 Network Management
on the U2000. The OptiX OSN 9800 can be configured as the master or a slave subrack on this
NE.
Issue 01 (2013-08-10)
43
Table 4-1 describes the operation and maintenance functions supported by the OptiX OSN
9800.
Table 4-1 Operation and maintenance functions
Issue 01 (2013-08-10)
Item
Description
End-to-end
service
configuration
Alarms and
performance
monitoring
The OptiX OSN 9800 provides various alarms and performance events,
which enables the user to implement administration and maintenance.
Loopback
ETH-OAM
MPLS-TP OAM
PRBS test
A board that supports the pseudo random binary sequence (PRBS) test
function is equivalent to a simple tester that transmits data to itself. The
user can perform a PRBS test during deployment or fault location to
determine if a service channel is faulty without using a tester.
44
Issue 01 (2013-08-10)
Item
Description
Test frame
Tunable
wavelengths
The OptiX OSN 9800 provides wavelength-tunable line boards that carry
10 Gbit/s, 40 Gbit/s, or 100 Gbit/s signals.
Jitter
suppression
function
Hot patch
Software
package loading
Orderwire
Function
One-click data
collection
The user can use the one-click data collection function to collect fault and
performance data of faulty equipment at one time.
Bandwidth
management
Power Supply
Management
The OptiX OSN 9800 uses an intelligent power supply pool and supports
visualized power consumption management, enabling on-demand power
capacity expansion.
OSNR detection
45
Issue 01 (2013-08-10)
46
Idle Boards
Idle Portsa
Normal mode
Power-saving
mode
Enhanced
power-saving
mode
Idle cross-connect bus: Before a service board is added, the cross-connect bus designated
for the service board is shut down. In other words, the cross-connect bus designated for a
service board is available only after the service board is added.
Idle boards: Before logical boards are added, service boards automatically enter the power
saving state, and no power is applied to the boards.
Idle ports:
This measure applies to idle pluggable optical modules. When a port holding such a
module is unused, the laser on this port is turned off automatically.
Power saving for ports depends on whether the ports are provisioned with services.
Issue 01 (2013-08-10)
47
Heat dissipation is also an effective way for the OptiX OSN 9800 to save power. The OptiX
OSN 9800 provides an adjustable fan speed mode and an auto fan speed mode. In auto mode,
the NE implements separate and stepless fan speed adjustment automatically based on the board
temperature. For example, the speed of the fans in the low-temperature partition is automatically
adjusted to a low level for power saving. In adjustable mode, the fan speed can be manually set
to three levels: low speed, medium speed, and high speed.
Users can query the nominal power consumption of an NE, current power consumption of
an NE, nominal power consumption of a subrack, current power consumption of a subrack,
nominal power consumption of a board, and current power consumption of a board.
The U2000 provides a report of networkwide NE power information, such as the nominal
power consumption, current power consumption, mean power saved, and annual power
saved of each NE.
Huawei guarantees that the volume of the package containing the OptiX OSN 9800 and
accessories is no more than three times that of the equipment.
All mechanical plastic parts of over 25 g are labeled according to the standards of ISO
11469 and ISO 1043-1 to ISO 1043-4. All components and packaging are provided with
standard labels to facilitate recycling and reuse.
Plugs and connectors are included with the equipment. Users can operate them with
ordinary tools.
Labels on the equipment can be easily removed. Some identification information like
silkscreen is printed directly onto the front panels or subracks.
Issue 01 (2013-08-10)
48