Professional Documents
Culture Documents
Specification Data: General Features Recommended Uses
Specification Data: General Features Recommended Uses
FEATURES
EURO-poxitar
TE06,
is
an
excellent coal tar coating formulated
with epoxy resins and thermoplastic
polymers.
EURO-poxitar TE06,
applied on iron and steel.
can
be
Easy application.
Good sealer.
RECOMMENDED USES
INDUSTRIAL AND
MARINE APPLICATIONS
Tanks: ballast tanks, crude
tanks, fuel tanks etc.
Hull.
Pipelines
Specification Data
Binder Type / Pigment Type
Colors
Finish
Mate.
Mixing ratio
Curing agent
CA15.
Solids by Volume
55 % (Theoretical).
Pot Life
Base: > 42C (> 108F); Curing Agent: > 30C (> 86F).
Application method
Thinner
Drying time
Surface dry: approx. 1 hour (at 23C (73.4F) and 50% relative humidity).
Overcoating time
Recommended primers
When applying on top of aged coatings, make sure they are in sound conditions.
Ambient temperature
Min: 5C (41F) - Max.: 40C (104F). Avoid applications with relative humidity
higher than 85%. In case of any doubt, contact your local Euronavy agent.
Substrate temperature
Packing
The product must be stored in accordance with national regulations. The product
should be kept in a cool well ventilated places protected from high temperatures
Containers MUST BE kept tightly closed. Shelf life: 1 year
Approvals
Euronavy Laboratory
Application guide
SURFACE PREPARATION
EURO-poxitar TE06, is designed for application directly to iron/steel surfaces pre-treated by Blast cleaning to Sa 2,5 of the
Swedish Standard SIS 055900.
EURO-poxitar TE06, is designed for application on concrete surfaces free of grease, dry spray, dust, moisture and other foreign
matters.
Contact your local Euronavy agent, for recommendations.
APPLICATION
EURO-poxitar TE06, can be applied, brush, roller and airless.
Ventilation
It is very important for the safety of the applicator and the proper performance of EURO-poxitar TE06 that good ventilation be
provided to all portions of the enclosed area. Dry air IS a must since EURO-poxitar TE06, must not be applied with humidity over
85%
SAFETY
WARNING: Cause eye and skin irritation. The solvents may cause respiratory irritation in sensitive individuals. May cause allergic
skin reaction. Avoid breathing the solvents. Do not get in eyes on skin or clothing. ear eye and skin protective equipment. Use
appropriate respirator, it is recommended to avoid potential respiratory irritation. Wash skin thoroughly after use and water. Call a
physician. Launder clothing before reuse. If not breathing give artificial respiration, preferably mouth-to-mouth, and call physician.
FIRST AID: In case of eye contact immediately flush with plenty of water for at least 15 minutes while removing contaminated
clothing and shoes. Wash skin contact area with soap.
DISCLAIMER: This is not a specification and all information is given in good faith. Every values presented as Theoretical were calculated from the
product formula, unless otherwise mentioned, and can deviate from laboratory measurements using standard methods that may be not applicable,
giving the nature of the products. If requested, Euronavy can inform any internal measurement method used to determinate any given value presented.
This Technical Data Sheet content can be changed without previous notice. Since conditions of use are beyond the manufacturers control information
contained herein is without warranty, implied or otherwise, and final determination of the suitability of any information or material for the use
contemplated, the manner of use and whether there is any infringement of patents is the sole responsibility of user. The product is intended for
professional use only. Manufacturer does not assume any liability in connection with the use of the product relative to coverage, performance or
injury. For application in special conditions please consult Euronavy for detailed recommendations.