Professional Documents
Culture Documents
Kathrein 80010761
Kathrein 80010761
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
1710 2690
X
65
4
80010761
Type No.
Frequency range
Polarization
Gain
Horizontal Pattern:
Half-power beam width
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
0
Sector
60
Vertical Pattern:
Half-power beam width
Electrical tilt
1710 2690
1920 2200 MHz 2200 2490 MHz
+45, 45
+45, 45
2 x 11.5 dBi
2 x 12.2 dBi
67
> 30 dB
65
> 28 dB
60
> 28 dB
58
> 27 dB
Typically: > 20 dB
> 8 dB
Typically: > 20 dB
> 8 dB
Typically: > 20 dB
> 8 dB
Typically: > 20 dB
> 8 dB
36
3, xed
31
3, xed
25
4, xed
25
4, xed
Impedance
VSWR
Isolation, between ports
Intermodulation IM3
Max. power per input
50
< 1.5
> 28 dB
< 150 dBc (2 x 43 dBm carrier)
150 W (at 50 C ambient temperature)
67$
36$
dB
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
3 electrical downtilt
17102690
45$
17102690
+45$
7-16
7-16
65
31$
Input
Connector position
Wind load
dB
dB
3
0
Horizontal Pattern
Vertical Pattern
3 electrical downtilt
936.4340/a
110
58
25$
dB
10
10
dB
Subject to alteration.
Mechanical specifications
10
10
2 x 7-16 female
Bottom
Frontal:
75 N (at 150 km/h)
Lateral:
17 N (at 150 km/h)
Rearside:
75 N (at 150 km/h)
200 km/h
278 / 154 / 69 mm
L (Light)
1.8 kg (tension bands incl.)
375 x 172 x 92 mm
Panel and 1 unit of tension bands
for 45 125 mm diameter
Horizontal Pattern
Vertical Pattern
4 electrical downtilt
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: info@kathrein.com
80010761 Page 1 of 2
Accessories
General Information
Accessories
Type No.
Description
Remarks
Weight
approx.
278
322
352
734365
.5
8
35
64
54
Please note:
Material:
Grounding:
69*
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.
154*
Bottom view
* Dimensions refer to radome
The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
Please note:
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or
even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must
be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 2 80010761
936.4340/a
Environmental tests:
Subject to alteration.
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.