Professional Documents
Culture Documents
Config Point Multipoint
Config Point Multipoint
SENE
Jules
SENE ALUS
3- configure the remote port used for carrying all the traffic as ETB
For exemple her we have to carry 16 nodeBs each off them using 2 VC12
Jules
SENE ALUS
Jules
SENE ALUS
Jules
SENE ALUS
We this we create the VLAN 100 witch is related to all de direction going to the
first GBE going to the router.
Jules
SENE ALUS
Jules
SENE ALUS
In this window we have to feel some information like the Traffic descriptor and the
S-VLAN
Jules
SENE ALUS
As you can see here we create a TD of 69M witch is the BW we need to carry 32
VC12
Jules
SENE ALUS
Jules
SENE ALUS
10
Jules
SENE ALUS
11
Jules
SENE ALUS
12
Jules
SENE ALUS
13
Jules
SENE ALUS
14
Then we apply.
We repeat this actions for each local port on the ES1
For the ES16 the procedure is the same .
We use one local port according to the GBE we are using and several remote ports
each of them going to one direction
In this dont forget that the remote ports should be ETB mode and the double cross
connection should be done on the local port.
All the ports going to one GBE shoul be in the same S-VLAN.
For exemple now :
All the ports (local and remote) on the ES1 of B3045 , of 3012 and 5014 are in the
same VLAN because using the same GBE.
Jules
SENE ALUS
15
Jules
SENE ALUS
16