Professional Documents
Culture Documents
Bottling Systems AW June15
Bottling Systems AW June15
Bottling Systems AW June15
BOTTLING SYSTEMS
At the heart of the PURE Water Company ethos lies an ongoing
commitment to supply market leading and technologically advanced
systems for producing in-house bottled water for meetings and
hospitality demands.
The PURE Water bottling system range is designed to offer machines
that provide high volumes of water and are both functional and easy
to use.
PURE Water bottling systems offer a bottling capacity of up to
300 litres per hour with a choice of either electronic dispense or
Cobra dispense, depending on location and volume.
Electronic dispense systems are supplied with a built-in drip tray.
Cobra systems are supplied with either a counter mounted or
counter sunk drip tray. The water block is a safety feature that
prevents the possibility of flooding from the unit.
PURE Water bottling systems will normally be located back of
house, for example, in the stills area of a main kitchen.
Electronic dispense
Allows bottle filling at the
press of a button.
Eco-friendly design: Machine
has a manual sleep mode
(power saving) which can be
pressed when not in use.
Electronic dispense includes
a built-in counter to monitor
water usage for reporting.
All filtration and CO2 housed
inside cabinet (floor standing
unit only).
WWW.PUREWATER.UK.COM
TECHNICAL DATA
1 x 13amp socket
(above counter)
Water
1 x 15mm mains
water supply
with local shutoff, terminating
in a ballofix
connection
(below counter)
CO2
cylinder
size
Cooler
dimensions
(WxDxH)
Design
considerations
Size SB
(located
under
counter)
120lt
350 x 480
x 500mm
Allow adequate
space on counter
Small hole through
counter for water
supply to cooler.
180lt
350 x 530
x 500mm
(counter
mounted)
500mm (h)
Power
1 x 13amp socket
(wall mounted)
Water
CO2
cylinder
size
Cooler
dimensions
(WxDxH)
Design
considerations
1 x 15mm mains
water supply
with local shutoff, terminating
in a ballofix
connection
(low level)
Size E
120lt /180lt
480 x 569
x 1480mm
Waste connection
needs to be a
maximum height
of 300mm from
ground level in
plastic pipe.
1480mm (h)
569mm (d)
480mm (w)
1 x 13amp socket
(wall mounted
low level)
Water
CO2
cylinder
size
Cooler
dimensions
(WxDxH)
Design
considerations
1 x 15mm mains
water supply
with local shutoff, terminating
in a ballofix
connection
(below counter.)
Size SB
900 x 540
x 690mm
Cobra Tap
420mm (h)
900mm (h)
Power