Professional Documents
Culture Documents
Stand Alone AP Flash File System Fail
Stand Alone AP Flash File System Fail
When trying to convert an 1142 AP from LAP to Autonomous AP, I did a mistake. I copied the new IOS
(.tar) with the copy-command. However, I shouldve used the archive /xtract-command. When I
reloaded, the AP presented me with this;
using
eeprom values
Numonyx P33
The BOOT
ap:
So. No IOS. What to do? Do I really have to use a slow xmodem-transfer to recover this AP? I thought I
did, but there is a way to avoid it. Make sure the AP has network-connectivity to an TFTP-server (in my
case, 10.10.10.10). Then issue the following commands;
ap: set IP_ADDR 10.10.10.20
ap: tftp_init
Then we delete the current IOS (.tar). We are now ready to copy the new IOS (and properly this time).
Issue the following command;
ap: delete flash:c1140-k9w7-tar.124-25d.JA1.tar
Are you sure you want to delete "flash:c1140-k9w7-tar.124-25d.JA1.tar" (y/n)?y
File "flash:c1140-k9w7-tar.124-25d.JA1.tar" deleted
Success!