Professional Documents
Culture Documents
Practice Cisco NetRiders
Practice Cisco NetRiders
Cisco NetRiders Competitions Practice Site EMEAR 2013 Theoretical Exams Practice Exam 2013 Attempt 1
Create an access list that will prevent only the host 192.5.5.148 from accessing a web site located at 210.93.105.50.
Marks: 1
Choose one
answer.
a. access-list 10 deny tcp host 192.5.5.148 host 210.93.105.50 eq 80 access-list 10 permit tcp any
any
b. access-list 100 deny tcp 192.5.5.148 0.0.0.0 210.93.105.50 0.0.0.0 eq 80 access-list 100 permit
tcp any any
c. access-list 10 deny tcp 192.5.5.148 0.0.0.0 210.93.105.50 0.0.0.0 eq 23 access-list 10 permit tcp
any any
d. access-list 100 deny tcp host 192.5.5.148 255.255.255.255 210.93.105.50 255.255.255.255 eq
80 access-list 100 permit tcp any any
nh
ia
m
da
ar
Marks: 1
.c
ot
sp
og
bl
o.
An access list has been created that will deny the host 204.204.7.89 access to an ftp server located at 196.6.13.254. access-list
111 deny tcp 204.204.7.89 0.0.0.0 196.6.13.254 0.0.0.0 eq 21 access-list 111 permit tcp any any Which of the following groups of
commands will place this ACL in the proper location?
.e
om
Choose one
answer.
1 de 4
Time Remaining
Marks: 1
Choose one
answer.
a. a database of network addresses and their associated workstation identifiers created by DHCP
b. a centralized point of management of users and groups
c. a file system management protocol
d. an electronic phonebook with changing addresses
e. a database management protocol
4
Marks: 1
A company needs a WAN connection that is capable of transferring voice, video, and data at a minimum data rate of 155 Mbps.
Which WAN connection is the best choice?
Choose one
answer.
a. X.25
b. MLPS
13/05/2013 20:07
What do routers use to select the best path for outgoing data packets?
Marks: 1
Choose one
answer.
a. switching tables
b. ARP tables
c. bridging tables
d. routing tables
6
Marks: 1
bl
o.
ar
d. 4
nh
c. 5
ia
Choose one
answer.
m
da
To obtain CDP information from a Cisco router that is not directly connected to the administrator's console, what must happen?
og
Marks: 1
Choose one
answer.
a. The source router must send TLV blocks to the remote router.
sp
b. The administrator must transmit TTL packets to the remote device and wait for a response.
ot
c. The administrator can Telnet to a Cisco device that is connected to the remote router.
d. The administrator needs to issue the Router
Marks: 1
Choose one
answer.
.e
om
.c
2 de 4
a. no ip classless
b. router rip
c. router OSPF serve 1
d. ip no classless
e. ip classful
Marks: 1
Choose at least
one answer.
10
You are installing a network in Cody,Wyoming. Which wiring codes must you follow?
Marks: 1
13/05/2013 20:07
11
Which of the following networking devices increase the number of collision domains?
Marks: 1
Choose one
answer.
a. switch
b. multiport repeater
c. hub
d. repeater
12
Waste and loss of material are normal costs in any cabling project. What is a reasonable waste cost to include on a bid?
Marks: 1
Choose one
answer.
a. 15%
b. 8%
c. 4%
d. 20%
e. 1%
Marks: 1
o.
Choose one
answer.
ar
nh
13
ia
m
da
c. It uses a hub or a switch as a central point to connect all wires.
bl
ot
sp
og
14
Marks: 1
.e
om
.c
Which of the following can be concluded from the router output displayed in the graphic?
Choose one
answer.
3 de 4
Choose one
answer.
a. The interface has been configured for subinterfaces and this map is for subinterface 0.
b. none of these answers
c. There is currently no congestion on the link.
d. The LMI type is ANSI (0x64).
e. Inverse ARP has determined the remote ip address as 10.140.1.1.
15
Marks: 1
The routers in the diagram are configured for RIP v2 on network 1.0.0.0. Additional static routes are configured as shown in the
graphic. What will RA do with a packet it receives on interface 1.1.1.1 that is destined for host 2.2.1.1 on a remote network?
13/05/2013 20:07
a. forward it to 1.1.3.2
b. drop the packet
c. forward it to 2.1.1.2
d. none of these answers
e. forward it to 1.1.2.2
16
Marks: 1
Choose one
answer.
a. enables the router to select the most appropriate interface for forwarding a packet
b. uses network addressing to select the best route and interface to forward data
c. allows the router to make forwarding decisions based on Layer 2 addressing
d. accepts a packet on one interface and forwards it to a second interface
17
Which dial plan component is responsible for selecting the appropriate path for a call?
Marks: 1
Choose one
answer.
m
da
d. call coverage
18
A customer wants to interconnect a Cisco Unified CallManager cluster with an SIP carrier. Which features of an IP-to-IP gateway
would be required?
Choose one
answer.
a. media flow-through
d. codec filtering
A Catalyst switch must be in which VTP mode in order to delete or add VLANs to a management domain.
.c
19
ot
sp
og
c. protocol interworking
bl
o.
ar
Marks: 1
nh
ia
Marks: 1
a. transparent
.e
Choose one
answer.
om
b. server
4 de 4
Choose one
answer.
c. client
d. domain
Page: 1 2 3 (Next)
1992-2012 Cisco Systems Inc. All rights reserved. Terms of Use Privacy Statement Trademarks of Cisco Systems, Inc. Contact Us
13/05/2013 20:07
20
Marks: 1
Choose one
answer.
a. the time required for a NIC to place a frame on the network media
b. the delay between the time a frame leaves its source device and reaches its destination
c. the degradation of a signal as it travels along the media
d. the noise generated from outside a cable
21
The goal of an internetwork designer is to design a cost-effective, scalable, working network. What is the first step when
designing a small to medium sized internetwork?
a. Develop a logical diagram of existing network.
b. Identify the network load requirements.
ar
Choose one
answer.
nh
ia
Marks: 1
m
da
o.
When implementing VoIP services, which two design considerations should be followed? (Choose two.)
sp
22
og
bl
Marks: 1
Time Remaining
Choose at least
.c
one answer.
ot
b. Establish priority queuing to ensure that large data packets are sent uninterrupted.
om
23
Marks: 1
.e
1 de 2
Cisco NetRiders Competitions Practice Site EMEAR 2013 Theoretical Exams Practice Exam 2013 Attempt 1
Switch port Fa0/24 was previously configured as a trunk, but now it is to be used to connect a host to the network. How should
the network administrator reconfigure switch port Fa0/24?
Choose one
answer.
a. Administratively shut down and re-enable the interface to return it to the default.
b. Enter the no switchport mode trunk command in interface configuration mode.
c. Use the switchport mode access command from interface configuration mode.
d. Use the switchport access vlan vlan number command from interface configuration mode to
remove the port from the trunk and add it to a specific VLAN.
e. Enter the switchport nonegotiate command from interface configuration mode.
24
Marks: 1
While deleting the VLANs from a switch, a network administrator receives the following message, "A default VLAN may not be
deleted". What did the administrator do to cause this message to be displayed?
Choose one
answer.
13/05/2013 20:01
Router XYZ is to be added to OSPF area 0. Which of the following is the correct syntax for enabling OSPF on this router?
Marks: 1
Choose one
answer.
a. XYZ(config)router ospf 10
b. XYZ(config)router ospf processid 10
c. XYZ(config)router ospf process 10
d. XYZ(config)router ospf process 0
26
Match the OSI model layer name with a characteristic of that layer.
Marks: 1
Network
Data Link
Presentation
Application
Physical
Transport
Session
27
m
da
ia
Marks: 1
ar
nh
Konqueror, Netscape 6, Opera 4 and 5, Amaya 4.0 Browser hit the market
o.
bl
US Department of Defense declared TCP/IP as the standard for all military computer
networking
28
.c
ot
sp
og
By typing _______________ run you will be able to see the current configuration in the router
Marks: 1
om
Answer:
.e
s
2 de 2
25
29
According to Wikipedia , March 2011 what percentage of people browsing the internet use FireFox?
Marks: 1
Answer:
1992-2012 Cisco Systems Inc. All rights reserved. Terms of Use Privacy Statement Trademarks of Cisco Systems, Inc. Contact Us
13/05/2013 20:01
Cisco NetRiders Competitions Practice Site EMEAR 2013 Theoretical Exams Practice Exam 2013 Attempt 1
30
The Cisco 2500 series of routers were superseded by the ____________ series of Cisco routers
Marks: 1
Answer:
31
Marks: 1
32
In the original IP address hierarchy, there are two levels: a network and a host. In a classful addressing scheme, the first three
leading bit values are used to determine that an IP address is either a Class A, B, or C. When an address is identified by class,
the number of bits that make up the network ID and the number of bits that make up the host ID are known. The default subnet
masks for the network classes are:
ar
nh
ia
Marks: 3
The router reads the subnet mask from left to right, bit by bit. If a bit in the
mask is set to 1, it indicates that the value in
that position is part of the network ID. A 0 in the subnet mask indicates that the value in that position is part of the host ID.
m
da
Class A
o.
Time Remaining
Class B
og
bl
Class C
33
.e
s
Answer:
34
om
Marks: 1
.c
ot
sp
1 de 2
Marks: 1
Guest Wireless has not obtained an IP number. What service does that laptop have configured to grab and IP number?
Answer:
35
Marks: 1
a. 200.0.0.0
b. 200.1.1.0
c. 200.100.100.0
d. 200.100.1.0
36
Marks: 1
13/05/2013 20:06
37
Marks: 1
Choose one
answer.
a. RIP v2
b. RIP
c. OSPF
d. EIGRP
38
Marks: 1
Choose at least
one answer.
a. very helpful
b. helpful
c. not helpful
d. no comment
39
m
da
Did you have trouble with any of the graphics or Packet Tracer files?
Please list the number of the question
Your version of Packet Tracer
Your operating System
Your Web browser.
bl
o.
Thank You
The NetRiders Team
ar
nh
ia
Answer:
.e
om
.c
ot
sp
og
s
2 de 2
Answer:
Path:
Page: (Previous) 1 2 3
1992-2012 Cisco Systems Inc. All rights reserved. Terms of Use Privacy Statement Trademarks of Cisco Systems, Inc. Contact Us
13/05/2013 20:06